Preview only show first 10 pages with watermark. For full document please download

Evolution Series Applied T-stop Jamb J1260a Specifications (wood Veneer Face, 60 Minute)

   EMBED

Share

Transcript

Evolution Series Veneer Jamb – Rated (60 minutes) J1260A Applied T-Stop Jamb (3/4”) A 1/8” (3 mm) hardwood edges B 3/4” (19 mm) 60 min fire core C 1/32” wood veneer face D 5/8” (15.8 mm) x 1  1/2” (38.1 mm) hardwood door stop (standard) E Door F Corner rabbet type  OPTIONS || Other configurations upon request  || * M.R. 5.1/5.2 according to project localisation. Contact us. 1 7/8 ” || ** To get M.R. 7.0, specify FSC core and faces. || *** To get IEQ 4.4, specify NAUF jamb. || Mounting brackets available SPECIFICATIONS MINIMUM WALL THICKNESS: 4  5/8” (117 mm) || Pre-machining || Pre-finishing ASSEMBLY: Please refer to installation instructions || Subject to evaluation. Contact us. MAXIMUM OPENING NOTE || Single: 48” (1,219 mm) x 96” (2,438 mm) || Mounting brackets are suggested for proper installation. || Double: 72” (1,829 mm) x 96” (2,438 mm) CASING: 5/8” (15 mm) x 2  1/2” (64 mm) SHIPPING: Unassembled (Knock Down) Variable  1 1/2”  || Installation requires a wood casing of 1/4” x 1  1/2” minimum. WRAPPING: Each frame will be shipped in a cardboard box, with 1/32” (1 mm) foam and bundle wrapped. Installation instructions and peel-and-stick door bumpers are included (mandatory)  WARRANTY: 3 years  5/8” 3/4” 1 3/8”  JAMB ASSEMBLY Head and jamb LEED Eligible Credits 3 4 MR 5 6 7 IEQ 3.2 ID 1 4.4 mode 2 PR 2 6 2 x Confirmat screws Pre-drilled holes Rev. March 13, 2014 FSC® certified products available on request. Toll Free: 1-800-804-5666 www.baillargeondoors.com JA-7