Preview only show first 10 pages with watermark. For full document please download

Ex4- Ww- N - Pinnacle Architectural Lighting

   EMBED

Share

Transcript

EDGE EX4WW LUMINOUS GEOMETRYTM T5, T5HO Direct Linear Open Wall Wash Project Name 4-3/4” Date Catalog Number EX4-N-O Type EX4-N-WO CONSTRUCTION 6063-T5 extruded aluminum housing. Ripple pattern aluminum trim painted black for brightness control. Highly specular extruded aluminum reflector (open) designed for perfect wall wash illumination. ELECTRICAL Standard T5 and T5HO: Program start 120/277 volt integral electronic ballast with less than 10% THD. 4-7/16” Through wiring with quick connects standard. Standard single circuit. Each ballast provided with disconnects to meet luminaire disconnect code requirement. MOUNTING Aircraft cable available. Adjustable aircraft cable mounts on 4’-0” and 8’-0” centers (See back page for MR16 mounting detail). Aircraft Cable supplied with 5” power and 2” non-power canopies. Refer to installation instructions4-3/4” for appropriate ceiling detail. Canopies are painted white unless otherwise specified. APPLICATION GUIDELINE Edge Wall Wash is designed to be mounted facing wall between 18”-36” from wall. Opti- mal performance being at 24” off wall. EX4-R-N FINISH Standard powder-coat white painted finish. Consult factory for custom colors. EX4S-R-N LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted. YEAR WARRANTY LFL Convertible 4-3/4” LED L U M I N A I R E S P E C I F I C AT I O N EX4HOUSING EX4Edge EX 4 WWDIRECT NINDIRECT N- None, Closed WW-Open Wall Wash 1T__LAMPS 4-7/16” LED Convertible LFL Sample Catalog #: EX4-WW-N-1T5-24-AC48G1-120-1C-W YEAR WARRANTY __LENGTH 1T5- (1) T5 1T5HO- (1) T5HO Individual Units 4- 4’ 8- 8’ Continuous Runs xx’- Specify nominal overall row length in 4’ increments AC____LFL Convertible LED MOUNTING ___LED __- __- __- CIRCUITING FINISH OPTIONS Convertible VOLTAGE Aircraft Cable1 AC48G1- 1” T-Bar2 AC48G9- 9/16” T-Bar2 AC48GS- Slotted T-Bar2 AC48JB- Junction Box AC48ST- Structure AC5__G_- 5” Non-Power Canopy3 AC5__JB- 5” Non-Power Canopy3 SQ48G_- 5” Square Canopy3 SQ48JB- 5” Square Canopy3 LFL 120- 120 V 277- 277 V 347- 347 V4 UNV- UNV4 (120/277) 1C1D1B1E- W- Matte White CC- Custom Color B- Baffle LC- Clear Acrylic Lens M__- MR16 Lamp6 CN- NonIlluminated Connector Single Circuit Single Circuit Dimming5 Single Circuit with Battery Pack5 Single Circuit with Emergency Circuit5 Consult factory for additional lengths. 2Consult factory for tegular edged tiles. 3Replaces standard 2” canopy. 4347 volt and UNV not available with MR16 and battery packs. 5Some Edge EX configurations will not accommodate all electrical options. Consult factory. 6See Back Page for Layout and Ordering Information.. 1 Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239 Phone 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com © 2012 Pinnacle Architectural Lighting® April 2012 Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions. PHOTOMETRICS 1129 4' EDGE EX4_WW 1960 1 84748.0" 1470 584 980 (1) lens per282 4' unit 1/2" (1) lens per 8' unit T8 T5 T5HO 1 or 2-28W 1 or 2-54W 1 or 2-32W Test # 202452 Test #4'202451 Part #:8'EX4-WW-N-1T5 2 or 4-28W 2 or 4-54W 2 or 4-32W Part #: EX4-WW-N-1T5HO Total Luminaire Efficiency: 71.2% Total Luminaire Efficiency: 71.8% 1Add 1/16" for each end plate or 1/8" to the overall length of the row. EX44-WW-1T5 INDIVIDUAL MODULES 1 1/2" 96.0"1 8' T8 T5 T5HO 4' 1 or 2-28W 1 or 2-54W 1 or 2-32W 8' 2 or 4-28W 2 or 4-54W 2 or 4-32W 1 Add 1/16" for each end plate or 1/8" to the overall length of the row. EX44-WW-1T5HO MOUNTING OPTIONS 4' (1) lens per 4' unit 96.0"1 8' (2) lenses per 8' unit (2) reflectors per 8' unit 4' 8' T5 1 - 28W 2 - 28W 1/2" (2) louvers per 8' unit (1) reflector per 4' unit 96.0"1 8' (1) louver per 4' unit 48.0"1 48.0"1 4' 4' 490 96.0"1 8' 48.0"1 T8 T5 T5HO 4' 1 or 2-28W 1 or 2-54W 1 or 2-32W 8' 2 or 4-28W 2 or 4-54W 2 or 4-32W T5HO 1 - 54W 2 - 54W 1Add 1/16" for each end plate or 1/8" to the overall length of the row. 1/2" 48.0"1 MR16 HALOGEN LAMP 4' APPLICATION: MR16’s are ideal for conference rooms, corridors, wall washing, retail spaces and1 training facil96.0" ities where accent lighting is required. TECHNICAL: MR16 fully enclosed compartment elimi8' nates light from entering into other fixture areas. Available in 20, 35 and 50 watt halogen lamps (lamps not T5 factory T5HOfor other T8 included). Consult lamp types. Lamp tilts to 35 degrees left or 4' 1179 or 2-28W or 2-54W 1 or 2-32W right with degree1 rotation. 8' 2 or 4-28W 2 or 50 4-54W or 4-32W ELECTRICAL: Standard watt2 max halogen lamp transformer. MR16 installed as independent circuit. MR16 voltage to match fluorescent voltage. Universal 1Add 1/16" for each end plate or 1/8" to the overall length of the row. voltage and 347 volt not available. 1 AC - Add 1/16" Ai rc ra ftfor each end plate or 1/8" to the overall length of the row. Ca b l e 48.0"1 NON-ILLUMINATED CONNECTOR 4' APPLICATION: Utilize non-illuminated con(1) reflector per 4' unit nectors to create unique configurations. 96.0"1 INSTALLATION: Non-illuminated connector 8' easily(2)joins to linear fixtures using standard reflectors per 8' unit Pinnacle Lighting joiner kits. T5 T5HO 4' 1 - 28W 1 - 54W ORDERING INFORMATION: Specify Non8' 2 - 28W 2 - 54W Illuminated Connector (CN) in the options section of the part number. Sample Catalog #:each EX4-WW-N-1T5-24-AC48G1-120-1C-W-CN. 1Add 1/16" for end plate or 1/8" to the overall length of the row. LABELS: UL and cUL Listed, approved for dry/damp location unless otherwise noted. 48.0"1 ORDERING INFORMATION: Specify MR16 layout and lens in the options section 4' of the part number. Sample Catalog #: EX4-WW-N-1T5-24-AC48G1-120-1CS-M2/LP. See MR16 Resource Guide for Layout and Lens Options (1) louver per 4' unit 96.0"1 CLEAR ACRYLIC LENS 8' BAFFLE (2) louvers per 8' unit APPLICATION: Lens is ideal for applications requiring lamp protection. CONSTRUCTION: Clear acrylic lens features a snap-in attachment allowing for See back page for staggered lamp row examples. easy lamp replacement. 1Add 1/16" ORDERING INFORMATION: Specify Lens (LC) the options for each end plate or 1/8" Clear to the Acrylic overall length of theinrow. section of the part number. Sample Catalog #: EX4-WW-N-1T5-24-AC48G1-1201C-W-LC. 48.0"1 4' 8' (1) lens per 4' unit APPLICATION: Baffle controls glare and provides lengthwise shielding of lamp. CONSTRUCTION: Curved baffles are highly reflective white painted aluminum. Baffles are field installed and feature a snap-in attachment. ORDERING INFORMATION: Specify Baffle (B) in the options section of the part number. Sample Catalog #: EX4-WW-N-1T5-24-AC48G1120-1C-W-B. 96.0"1 (1) lens per 8' unit See back page for staggered lamp row examples. 1Add 1/16" for each end plate or 1/8" to the overall length of the row. Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239 Phone 303.322.5570 Fax 303.322.5568 www.pinnacle-ltg.com © 2012 Pinnacle Architectural Lighting® April 2012 Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.