Transcript
‧2011 Master Catalog
EX43000 Series
Unmanaged Industrial 8-port 10/100BASE Ethernet Switch
Value
UL60950-1
Flexible 10/100BASE-TX and FX port configurations Alarms for power failure thru relay output
Features Provides flexibility of 8 Ethernet ports that configure in combinations of copper and fiber optic interfaces
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Complies with IEC61000-6-2 EMC Generic standard immunity for
Redundant power inputs with Terminal Block or DC Jack -20°C to 60°C (-4°F to 140°F) and is tested for functional operation
Industrial environment Alarms for power failure by relay output
@ -30°C to 70°C (-22°F to 158°F)
Ordering Information EX43008-00-I-P
8-port 10/100BASE-TX Industrial Unmanaged Ethernet Switch
EX43018-XY-I-P
8-port 10/100BASE-TX + 1-port 100BASE-FX Industrial Unmanaged Ethernet Switch
EX43026-XY-I-P
6-port 10/100BASE-TX + 2-port 100BASE-FX Industrial Unmanaged Ethernet Switch
EX43044-XY-I-P
4-port 10/100BASE-TX + 4-port 100BASE-FX Industrial Unmanaged Ethernet Switch
100FX Fiber Options : (XY) = 1A : Multi Mode (SC) - 2Km 1B : Multi Mode (ST) - 2Km 2A : Single Mode (SC) - 20Km 2B : Single Mode (SC) - 40Km 2D : Single Mode (ST) - 20Km 1H : Multi Mode (SC) WDM -TX: 1310nm/RX:1550nm - 2Km 1J : Multi Mode (SC) WDM -TX: 1310nm/RX:1550nm - 5Km 2E : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km 2F : Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km 1 I : Multi Mode (SC) WDM -TX: 1550nm/RX:1310nm - 2Km 1K : Multi Mode (SC) WDM -TX: 1550nm/RX:1310nm - 5Km 2G : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km 2H : Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km *More 100FX Fiber options also available upon request. Installation Type : (I) = 1 : DIN Rail (mounting kit is included) Optional Panel mount kit, part number: KP-AA96-480
Optional Rack mount kit, part number: KR-BK43-400
Power Connector Options : (P) = A : Terminal Block* / B : DC Jack** *Option A - The Terminal Block type external power supply are not included. Please order the following part numbers, as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP **Option B - The external power adapter and power cord are not included. Please order the following part numbers, as required: 41-136044-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
77
Ethernet Switches
01
Specifications Forward and Filtering Rate
14,880pps for 10Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward
148,810pps for 100Mbps
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Address Table Size
2048 MAC addresses
Latency
Less than 7.1µs
Power Input
Input Voltage:
Power Consumption
13.2W Max. 1.1A @ 12VDC, 0.55A @ 24VDC
Power Supply References
Terminal Block: 48VDC, 2.5A
Reverse Polarity Protection
Present
Operating Temperature
-20°C to 60°C (-4°F to 140°F) Tested @ -30°C to 70°C (-22°F to 158°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals ISO
Manufactured in an ISO9001 facility
Safety
UL60950-1
EMI
FCC Part 15, Class A EN61000-6-3 - EN55022 - EN61000-3-2 - EN61000-3-3
EMS
EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV; Criteria B Air: + / - 8KV; Criteria B - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM Criteria A 3V/m, 1400 to 2000MHz; 80% AM Criteria A 1V/m, 2000 to 2700MHz; 80% AM Criteria A - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV; Criteria B D.C. Power Ports: + / - 4KV; Criteria B - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line; Criteria B D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.)
12 to 30VDC (Terminal Block); 12VDC (DC Jack)
DC Jack: 48VDC, 2.5A
Mechanical Casing
Aluminum case IP30
Dimensions
50mm (W) x 125mm (D) x 135mm (H)
Weight
0.8Kg (1.76lbs.)
Installation
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
(1.97" (W) x 4.92" (D) x 5.31" (H))
Interface Ethernet Port
10/100BASE-TX: 8, 6 or 4 ports 100BASE-FX: 0, 1, 2 or 4 ports
LED Indicators
Per Unit: Power Status (Power 1, Power 2) Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow)
Alarm Contact
Media Converters
TX/100BASE-FX, IEEE802.3x
Ethernet Switches
Environment IEEE802.3 10BASE-T, IEEE802.3u 100BASE-
One relay output with current 1A @ 24VDC
Diagrams
Serial Device Servers Ethernet Extenders
Standards
Accessories
Technology
Unit: mm 125
DC JACK
U FA 2V
LT
/3A
135
DC
TERMINAL BLOCK
PW
R
GN
D
PW
R2 N D G
U FA
LT
50
Front
Side
Back
Top
Bottom
www.etherwan.com 78
