Transcript
P214
1' × 4' High Efficiency Static Parabolic / 1 or 2-Lamp T5, T5HO, T8
3" Deep Louver
PROJECT INFORMATION Project Name
Type
Catalog No.
Date
CONSTRUCTION
Luminaire housing and end caps are die formed code gauge cold rolled steel. Reflecting surfaces of body and reflector/wireway covers create parabolic contour for precise distribution control. Louver is formed from low iridescent anodized aluminum and is secured by die-formed spring steel hinges. Louver hinges from either side. Mechanical light trap prevents light leaks. Latches are finger-tip actuated, positive feed type.
FEATURES • 3" deep cell louver combined with maximum luminous opening, ideal for retail environments • Meets IES standard RP-1 glare control • Ideal for today's electronic office • Wide light distribution provides uniform illumination • Utilizes the entire opening of the module to maximize light output • Anodized aluminum louver, low iridescent available for tri-phosphor lamps • Surface and cable mount available
FINISH
Painted parts are treated with a five stage phosphate bonding process and finished with a high reflectance baked white enamel. AIR HANDLING
Standard luminaire is static. Air extract option available with or without dampers to remove room air and cool lamps.
ELECTRICAL
Standard class “P”, thermally protected, autoresetting HPF ballast, sound rated A. CEE NEMA Premium compliant. All ballast leads extend a minimum of 6" through access location. NEC/CECcompliant ballast disconnect is standard. CEILING COMPATIBILITY
Luminaire is available to fit most standard ceiling types. NEC-compliant T-bar clips supplied with all grid trim fixtures. See ceiling details on reverse. Contact your Columbia representative for compatibility information for specific ceiling types. CERTIFICATION
All luminaires are built to UL 1598 standards and bear appropriate UL and cUL or CSA labels. Damp location labeling is standard. Emergency-equipped fixtures labeled UL 924.
INSTALLATION
An access plate is furnished with each luminaire for fast wiring access from the plenum. No need to open fixture. Product ships standard with mylar dust cover to eliminate job site contamination. BALLASTS
Energy efficient, thermally protected, automatic resetting, Class P, high power factor, sound rated A, magnetic or electronic ballasts. CEE NEMA Premium compliant.
ORDERING INFORMATION P2
14
MODEL
–
1 One 2 Two
Efficiency Static Parabolic
1
–
NO. OF LAMPS
P2 High
CEILING TYPE G Grid F Overlap Flange M Modular Fit-in
8
–
SIZE
LAMP TYPE
14 1' × 4'
28 4', T5: 28 Watt 32 4', T8: 32, 30,
28 or 25 Watt 54 4', T5HO: 54 or 51 Watt
CM48Y1SCF3 48" Cable Mount
Kit for 1' Wide CM Trim Fixtures, 3 Wire
–
NO. CELLS NO. CELLS CROSSWISE LENGTHWISE 1 One
8 Eight
LOUVER FINISH LD Low Iridescent
Semi-Specular (Std.) LS Low Iridescent Specular MA Matte Anodized Low Iridescent Semi-Specular Aluminum
– BALLAST
OPTIONS
E Electronic T8,
F835 35K 78+ CRI T8
Lamps Installed
Instant Start
EP Electronic T5,
T5HO or T8, Programmed Start For a specific ballast vendor, show as option.
Trim SM Surface Mount (static only) CM Cable Mount (static only)1
ACCESSORIES (ORDER SEPARATELY)
1
EXAMPLE P214-154G-LD18-S-EU
AIR FUNCTIONS S Static H Heat Extract HD Heat Extract w/ Dampers
VOLTAGE U 120V-277V 347 347V
FO835 35K 82 CRI T8
Lamps Installed
F5835 35K 85 CRI T5
Lamps Installed
GLR Fast Blow Fuse GMF Slow Blow Fuse EL Emergency Battery Pack
MS9 Master/Satellite w/9' Harness
EOR End of Row (SM/
CM only. Provides end wiring access for continuous row mounting.) INT Intermediate (SM/ CM only. Provides ends with wiring access for continuous row mounting.)
Order hanger accessories separately.
Page 1/3 Rev. 04/24/17
PARABOLICS / P214.indd
© 2017 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
P214
1' × 4' High Efficiency Static Parabolic / 1 or 2-Lamp T5, T5HO, T8
PHOTOMETRIC DATA
Test 10491 Test Date 1/8/03
LUMINAIRE DATA
INDOOR CANDELA PLOT
ENERGY DATA
P214-232G-FS18-E P2 Parabolic 1 × 4 2-L Recessed with 1 × 8 Cell Specular Louver B232I120 0.96 FO32/741 2850 59 N/A
Ballast Ballast Factor Lamp Lumens per Lamp Watts Shielding Angle
Lumens % Lamp % Fixt.
0-30 0-40 0-60 0-90 0-180
1212 2061 3866 4081 4081
21.3 36.2 67.8 71.6 71.6
29.7 50.5 94.7 100.0 100.0
RCR
COEFFICIENTS OF UTILIZATION (%) RC RW 1 2 3 4 5 6 7 8 9 10
70 80 73 67 62 57 53 49 45 42 40
80 50 30 77 74 68 64 61 56 54 49 49 43 44 38 40 34 36 30 33 27 30 25
10 72 61 52 44 38 33 29 26 23 21
70 78 72 66 60 56 51 48 44 41 39
70 50 30 75 73 67 63 60 55 53 48 48 42 43 37 39 33 36 30 33 27 30 25
10 71 60 51 44 38 33 29 26 23 21
EXTRACT AIR DATA 50 72 65 58 52 46 42 38 35 32 29
50 30 70 61 54 47 41 37 33 30 27 24
10 69 59 50 43 38 33 29 26 23 21
.10
0 0 63 55 47 41 35 31 27 24 22 20
Negative Static Pressure Inches of Water
66 Yes - VDT Normal Use $3.64 based on 3000 hrs. and $0.08 per KWH
0 30 40 45 50 55 60 65 70 75 80 85
0.0
22.5
45.0
67.5
90.0
4826 4602 4427 4287 4017 3576 2345 628 83 49 36 0
4826 4697 4654 4711 4829 4800 3496 1144 129 61 36 36
4826 4996 5516 5896 6368 5907 3761 1413 379 73 55 36
4826 5405 6205 7036 6633 5968 2446 1473 656 85 55 36
4826 5551 6754 7232 7071 5571 2269 1541 693 85 55 36
Report AL-462-1.1
.08 .06
A
.04
.02 .015 0 15 20 40 60 80 100 200 400 600 800 1000 Return/Extract Air Flow Rate-CFM
RCR = Room Cavity Ratio RC = Effective Ceiling Cavity Reflectance RW = Wall Reflectance
A - Extract
DIMENSIONAL DATA
CEILING COMPATIBILITY Type G
Recessed Standard Housing
71.6%
Luminaire Efficacy Rating (LER) ANSI/IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens
AVG. LUMINANCE (Candela/Sq. M.)
ZONAL LUMEN SUMMARY Zone
Total Luminaire Efficiency
Average Luminance Angle
Luminaire
7¼" 3"
4¼"
12" Shallow housing available for lay-in type “G” only. 5¾" Contact factory for availability.
12"
Side
48"
3"
Type M
End
For lay-in installation in exposed grid ceilings. Maximum tee widths of 1" and maximum tee heights of 11⁄2" allowed.
4¼" 48"
NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification.
Side
End
For metal pan ceilings “Fit-in” style extruded trim aligns with modular tile joints. Fixture is supported with concealed suspension and includes all adjustable wing hangers.
Type F
Side
End
For tile, plaster or plasterboard type ceilings. Overlapping extruded aluminum trim conceals edges of ceiling opening. Wing hanger suspension system included. For row mounting, row information is required. Flange kit rough in dimensions for single unit only: 121/8" × 481/8"
Page 2/3 Rev. 04/24/17
PARABOLICS / P214.indd
© 2017 Columbia Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Columbia Lighting reserves the right to change specifications without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
