Transcript
Central New Mexico Community College Workforce Training Center Rooms 101 and 103 Scope of Work Outline The following information specifies needs for rooms 101 and 103 at the CNM Workforce Training Center Building The total number of rooms is two (2). Two (2) Projectors will be installed using existing projector ceiling plate, mounting pipe, and computer/audio cables. The following items will need to be purchased and will be the components used for these room installs: 2 x Hitachi CP-WX8255 5500 Lumens LCD, WXGA Projectors (or like model)
5500 Lumens 2.4-4.9mm/ x 2.0 digital Zoom Lens 3000:1 Contrast Ratio CC enabled and Crestron Integrated VGA and HDMI Compatibility
CNM will provide one duplex AC outlet per projector. The vendor will remove the existing projector cage and projector and deliver to CNM. The vendor will be responsible for the fully operational installation of the LCD Data Projectors using all necessary and construction rated mounts and related audio/video cables including the following:
Vendor will install a BMS LCD LOCIV Universal Projector Mount w/Storage (or like model) o Uses 1.5” Pipe o Weight Capacity – 150lbs. (UL Rated) o Mount is to adjust, without tools, 15 degrees +/- Tilt, Pitch, Roll and Swivel 360 degrees o Vendor will connect Hitachi CPWX8255A LCD Projector to all existing cables and connectors at location. o Projected image will fill the existing screen from a throw distance of 18 feet in room WTC-101 and 19 feet in WTC-103 o Image will fill the screen image area without use of projector keystone settings
The vendor will provide an additional eight (8) Hitachi CP-WX4022WN projectors. These projectors will be used for portable delivery.
4000 Lumens 1.7x Zoom Lens 3000:1 Contrast Ratio CC enabled and Crestron Integrated VGA and HDMI Compatibility
The vendor will provide all equipment and cabling required to enable these systems. The electrical outlet will be the responsibility of CNM. The Deadline for this project is Friday, June 28, 2013. The vendor will be responsible for providing a final equipment installation that meets CNM specifications and achieves the desired functionality. The selected vendor will be responsible for completed installation. The vendor will test and demonstrate to CNM staff (Audiovisual Services) full system functionality. The vendor’s response to any equipment failure is the next business day after notification by CNM of any technical issue. On site response, component replacement or repair is required by end of business the next day. Newly installed equipment shall be warrantied for one year from the date of sign-off by CNM. CNM reserves the right to accept or deny the installed systems based on demonstrated functionality.
