Export Catalogue Effective 1 June, 2010

Transcript

MOUNTING ADHESIVES AND OVERLAMINATES ROLLER LAMINATORS LIQUID COATING SYSTEMS CUTTING AND EDGING EQUIPMENT l l EXPORT CATALOGUE EFFECTIVE 1 JUNE, 2010 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Table of Contents Aqueous (Water-Based) Liquid Coaters/Laminators.....4 AFC3200, 3.2 metre Water-Based Flood Coater...................... 4 AFC1600/AFC2200, 1600mm or 2200mm Flood Coaters..... 4 EnduraCoat Aqueous Liquid Coatings...........................5 VersaCoater™ UV Curable Liquid Coaters.....................6 VersaCoater™ MultiPro . ............................................................ 6 VersaCoater™ PhotoMate........................................................... 6 VersaCoater™ XL60 (1.6m) and XL 80 (2.0m) Wide Format UV Curable Coater............................................................................ 7 InstaCure UV-Curable Liquid Coatings.........................8 Drytac Edge Finishing Systems (DES)—For a competitive edge.......................................................................... 9 DES-4 and DES-5 Edge Finishing Systems................................ 9 Edge Banding for the DES-4 and DES-5.................................. 10 Edge Secure Glue...................................................................... 10 DES-6 Edge Finishing System..................................................11 DES-3 Plaque Decor Edge Finishing System (2 stations).......11 Matte Edge Foils........................................................................11 Print Media for Aqueous Printers...............................12 FerroJet™ Matte Magnet-Compatible Print Media 228µ........12 Printable Eclipse™ Matte.........................................................12 Printable Eclipse™ Gloss..........................................................13 EarthSmart™ Premium Bond 234µ.........................................13 Panda Print™ Bamboo Fibre Print Media................................13 Print Media for Solvent Printers................................. 14 Printable Eclipse™ Matte Solvent............................................ 14 Panda Print™ Bamboo Fibre Print Media................................ 14 FerroJet™ Matte Magnet-Compatible Print Media 228µ........ 14 WindowFX Emerytex® Permanent 5.0 mil. ............................15 WindowFX Emerytex® Removable 5.0 mil..............................15 Print Media for UV Flatbed Printers............................15 FerroJet™ Matte Magnet-Compatible Print Media 228µ........15 FerroJet™ Synthetic Paper 177µ . ...........................................15 Panda Print™ Bamboo Fibre Print Media................................ 16 EarthSmart™ Eclipse 375µ...................................................... 16 JetMounter™ Roller Laminators................................. 17 JetMounter™ JM44SHA, JM54SHA, & JM63SHA...................18 JetMounter™ JM18, JM26 & JM34.........................................18 Pressure Sensitive Mounting Adhesives......................19 MediaTac™................................................................................19 TransferTac™.............................................................................19 BestMount™ Plus......................................................................19 TwinTac™...................................................................................20 RemoTac™.................................................................................20 Facemount™ UV........................................................................20 Synart.........................................................................................20 WindowTac™.............................................................................. 21 AutoType™................................................................................. 21 Heat-Activated Mounting Adhesive............................ 21 MHA™ Multi-Heat Adhesive...................................................... 21 Interlam Bio and Interlam Eco Laminates...................22 Interlam BioMatte™ 75µ..........................................................22 Interlam BioGloss™ 75µ...........................................................22 Interlam EcoGloss™ 65µ..........................................................22 Interlam EcoLustre™ 105µ.......................................................22 Interlam EcoTex™ 165µ............................................................23 ii E. & O.E. Interlam Pro Laminates ............................................23 Interlam Pro Glossy™ UV 100µ................................................23 Interlam Pro Matte™ UV 100µ................................................. 24 Interlam Pro Lustre™ UV 100µ................................................. 24 Interlam Pro Emerytex® UV 125µ–Floor Graphic Approved.. 24 Protac™ Laminates..................................................25 Protac™ Glossy UV 100µ..........................................................25 Protac™ Ultra Gloss UV 75µ.....................................................25 Protac™ SheenTex UV 105µ.....................................................25 Protac™ Matte UV 100µ...........................................................26 Protac™ Lustre UV 75µ.............................................................26 Protac™ Emerytex® UV 125µ..................................................26 Protac™ Emerytex® UV 125µ (continued).............................. 27 Protac™ Emerytex® Fire Retardant......................................... 27 Protac™ Anti-Graffiti UV 36µ.................................................... 27 Protac™ Ice 125µ...................................................................... 27 Protac™ Steel 100µ..................................................................28 Protac™ Deep Textured Canvastex UV 250µ...........................28 Protac™ Hessian UV 215µ........................................................28 Protac™ Canvastex UV 125µ....................................................28 Protac™ Linentex UV 125µ.......................................................28 Protac™ Scribe 65µ..................................................................29 MediaShield Heatset® Laminates.............................29 MediaShield Satinex™ UV 75µ.................................................29 MediaShield Matteex™ UV 75µ...............................................29 MediaShield Matte™ UV 100µ.................................................30 MediaShield Deep Textured Canvastex™ UV 215µ................30 MediaShield™ Gloss UV 56µ....................................................30 MediaShield™ Emerytex UV 125µ...........................................30 Thermal Overlaminates (Encapsulation Films)............ 31 MHL™ Gloss UV 125µ............................................................... 31 MHL Matte™ UV 125µ.............................................................. 31 MHL Frost™ UV 150µ................................................................ 31 MHL Eclipse™ UV 125µ............................................................ 31 MHL Eclipse™ UV 250µ............................................................ 31 Backing Materials....................................................32 Protac™ Rigid (UPVC) White Backing . ....................................32 Protac™ Eclipse 305mic...........................................................32 Magnetic and Magnetic Receptive Products...............33 FerroCoat Magnet-Compatible Wall Primer Paint...................33 Ferro™ Magnet Compatible Metal Paper................................33 Magnetic Sheeting....................................................................33 Adhesive Coated Magnetic Sheeting.......................................33 Drytac Magnetic Tape A & B for Pop-Up Display Booths........33 Edge-to-Edge Magnetic Tape....................................................33 FerroJet™ Matte Magnet-Compatible Print Media 150µ........34 FerroJet™ Synthetic Paper.......................................................34 Panda Stand™ Eco Friendly Bamboo Display Products.........35 General Graphics Accessories...................................36 Drytac Mule™ and Whip...........................................................36 Steel Edge Purple Safety Ruler & Steel Edge T Square..........36 Cutting Mat................................................................................36 Magnetic Laminator Caddy...................................................... 37 Zippy Cutter™............................................................................ 37 OLFA™ Knives............................................................................ 37 Leather Knife Pouch.................................................................38 DRS Roller (Dust Removal System).........................................38 Anti-Static Wisk™......................................................................38 Anti-Static Cloth.........................................................................38 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com TacCloth™..................................................................................39 Anti Static Gloves......................................................................39 Media Handling Gloves.............................................................39 Squeegee Roller........................................................................39 Burnishing Pads........................................................................39 Window Squeegee....................................................................40 Eraser Block™...........................................................................40 Banner Ups® PowerTape™........................................................40 Foam Tape.................................................................................40 Velcro® Tapes...........................................................................40 Sales Terms and Conditions....................................... 41 Icon Index A guide to the icons in this pricelist and what they mean: Warranty for outdoor durability, for more information visit our website at www.drytac. com Drytac is committed to a greener and sustainable future and products under the EarthSmart™ logo offer the best solutions currently available, all designed and sourced to minimise harm to the environment. Finishing Recommendations for Print Media Upon popular request we have provided a finishing recommendation for most of our print media. The suggestions listed are often the most popular, but are not the only finishing solutions that will be compatible. For more options contact your local Drytac representative. EnduraCoat Liquid Coating (aqueous/water-based) InstaCure Liquid Coating (UV Curable) Pressure-Sensitive Film Overlaminate (Protac™, Interlam Bio) E. & O.E. iii Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Aqueous (Water-Based) Liquid Coaters/Laminators Compatible with most roll-to-roll solvent, eco-solvent and pigmented inkjet and latex printers, Drytac® liquid coating systems protect inkjet graphics on vinyl, PSA, non-porous textiles, wet strength papers wall covering, canvas, and other flexible substrates. Coating costs are from £0.25 per square metre depending on application and coating used. AFC1600/AFC2200, 1600mm or 2200mm Flood Coaters AFC liquid coating systems are the most advanced coaters in the industry and the coater of choice for producing warrantable vehicle graphics, wall coverings, giclée canvas prints, bouncy castles, banners and other long term applications. Coating costs are typically from £0.25 per square metre depending on application and coating used. Compatible with most rollto-roll UV, solvent, eco-solvent and pigmented inkjet printers. An optional infrared heater significantly increases production speed. TruSpeed™ speed compensator, on board coating blender and coating level sensor allow for precise process control and ensure predictable coating results and reliable processing. NOTE: #18 and #26 Mayer Bars are included with the AFC1600 and AFC2200. #12 and #36 Mayer Bars are available on request. Your area sales manager can advise you on selection of Mayer Bars for your applications. Single phase and three phase power connections are available for these models. Product Code Description WBRC-60/50 1600mm aqueous flood coater WBRC-86 2200mm aqueous flood coater WBRC-60-AD Infrared heater for AFC1600 WBRC-86-AD Infrared heater for AFC2200 AFC3200, 3.2 metre Water-Based Flood Coater The AFC3200 liquid coater is ideal for coating non porous substrates such as canvas, scrim and smooth vinyl, textiles, Tyvek and wet strength papers. Applications include truck curtains, murals, protective coverings for kiosks, wall coverings, construction beautification programs, awnings and backlit vinyl. Supports most roll-to-roll UV and solvent based printer output on non porous materials. Features include TruSpeed™ speed compensator, on board coating blender and coating level sensor allow for precise process control and ensure predicable coating results and reliable processing. NOTE: #18 Mayer Bars are included with the AFC3200. #12,#26 and #36 are available on request. Product Code Description WBRC-128 3200mm WBRC-128-AD Infrared heater for AFC3200 COMING SOON! Coming soon . . . the Giclée Photo Coater 1220mm The Giclée Photo Coater has been specially designed for individual prints and single canvas rolls. Check our website at www.drytac.com for an update on its launch date. CALL US +44 (0)117 958 6500 FOR CURRENT FINANCE OPTIONS 4 E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com EnduraCoat Aqueous Liquid Coatings EnduraCoat liquid laminates are low in volatile organic compounds (VOC) and specially formulated for applications such as (warranted) fleet graphics; giclée prints on canvas; signs and banners or digitally printed wall coverings. While most of these coatings are optimally applied with the Drytac® line of coating equipment, they can all also be applied by hand with a roller, paint pad or airless sprayer. See www.drytac.com for hand application instructions. Product Code Name Description ECWBIG Intego Gloss Low cost gloss coating with UV inhibitors designed for “mop on” applications requiring outdoor usage up to 3 years. Super fast drying and virtually odour free. ECWBTG Transit Gloss Super flexible glossy coating for SAV fleet graphics to soft-sided truck curtains. Contains UV absorbers and light stabilisers, outdoor durable for 5 years. Compatible with solvent, eco solvent inks, UV and latex inks. ECWBUFG UltraFlex Gloss Flexible, gloss coating for vehicle wraps designed around solvent and UV inks and substrates. Contains UV absorbers and light stabilisers. Outdoor durable for 5 years. ECWBUFM UltraFlex Matte Flexible, matte coating for vehicle wraps designed around eco-solvent and UV inks and substrates. Contains UV absorbers and light stabilisers. Outdoor durable for 5 years. ECWBUM UltraMural Flat matte, fade resistant coating for digitally printed wall coverings. Excellent moisture and mildew resistance. Contains UV light absorbers and stabilisers. ECWBFA-HG* Fine Art HIgh Gloss Protects and enhances canvas/giclee prints and eliminates the “micro air bubble issue” commonly found in Giclee protection coatings, especially when machine applied. For use on AFC Series (and soon to be available 1220mm Giclee Coater). ECWBFA-S* Fine Art Satin Same as above but with a satin finish. ECWBFA-M* Fine Art Matte Same as above but with a matte finish. ECWBUSR* UltraStain Resist A high gloss, low VOC* fade resistant coating for use where chemical exposure or graffiti/tagging may be an issue. ECWAPP* Manual Application Kit Includes mop applicator for use when applying coatings by hand. * = Available on Special Request VOC*= volatile organic compound E. & O.E. 5 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com VersaCoater™ UV Curable Liquid Coaters The VersaCoater™ line of UV coaters are designed to deliver the best quality application with a lower cost of ownership than competing brands. This is achieved with smaller machine footprints, user-friendly controls and automated cleaning and shutdown processes. VersaCoater™ PhotoMate The VersaCoater™ PhotoMate is designed to coat photo projects like portraits, wedding photos, personalized photo albums and other custom photo projects. Dual path engineering can create your choice of Smooth, Artisan, Fine Canvas, Crystal, Leather or Linen textured finishes on the same machine. Note: The Smooth roller and one textured roller (Crystal unless otherwise specified) comes standard with the VersaCoater™ PhotoMate. Additional textured rollers can be ordered separately. Product Code Description VCPHM-24R2 610mm (24”) Dual Path VCPHM-36R2 915mm (36”) Dual Path VC-PHM-ART-24 610mm (24”) Artisan texture roller VC-CTR24 610mm (24”) Crystal texture roller VC-FCTR24 610mm (24”) Fine Canvas texture roller VC-LTR24 610mm (24”) Leather texture roller VC-LNTR24 610mm (24”) Linen texture roller VC-PHM-ART-36 915mm (36”) Artisan texture roller VC-CTR36 915mm (36”) Crystal texture roller VC-FCTR36 915mm (36”) Fine Canvas texture roller VC-LTR36 915mm (36”) Leather texture roller VC-LNTR36 915mm (36”) Linen texture roller VersaCoater™ MultiPro More compact and at a lower price point than the large format VersaCoater™ XL. Features include independent top and bottom roll feed, an adjustable nip up to 25.4mm (1”) thick allowing for coating of flexible prints as well as rigid panels up to 13 metres per minute. Optional soft roller available for coating specialty substrates like ceramic tiles and glass. Consider this coater a miniature version of the VersaCoater™ XL on page 7. Product Code Description VC-MP24 609 mm (24”) multipurpose UV curable coater CALL US +44 (0)117 958 6500 FOR CURRENT FINANCE OPTIONS 6 E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com The most economic and flexible finishing solution for wide format graphics VersaCoater™ XL60 (1.6m) and XL 80 (2.0m) Wide Format UV Curable Coater UV-curable liquid coating technology represents the new standard in graphics protection and enhancement. Whether it’s posters or point of purchase displays, flexible or rigid substrates, the VersaCoater™ XL offers a high speed finishing solution (between 9 metres and 34 metres per minute). And with no VOC’s, InstaCure UV-curable coatings offer an earth friendly solution consistent with today’s more environmentally friendly printing requirements. Dynamic Coating Technology Dynamic Coating Technology provides controls for the key parameters of the liquid coating process. As a result, the VersaCoater™ XL can handle a wider range of difficult to coat substrates than any other coater, and offers more options for modifying the thickness and aesthetics of the graphics finish. Adjustable controls include: • Adjust coat weight from 8 to 20+ microns • Control top and bottom roller speeds independently • Vary roller speed to adjust texture from fine to heavy Widest range of substrate and printer technology The versatile VersaCoater™ XL is engineered to handle most graphic substrates: flexible or rigid cut sheets up to 75mm thick, or roll to roll media*. Compatible with output from virtually any inkjet technology, including UV-curable roll-fed and flatbeds, and solvent or eco-solvent roll-fed models. * Requires optional roll to roll adapter Product Code Description VCXL-60 1600 mm (62”) UV liquid coater & curing unit VCXL-80 2082 mm (82”) UV liquid coater & curing unit VCXL-60RRS XL60 roll to roll feature VCXL-80RRS XL80 roll to roll feature VCXL-60RR Combined price for XL1600mm + roll to roll VCXL-80RR Combined price for XL2082mm + roll to roll CALL US +44 (0)117 958 6500 FOR CURRENT FINANCE OPTIONS E. & O.E. 7 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com InstaCure UV-Curable Liquid Coatings Technically superior. Environmentally safer. Minimal odour. InstaCure UV curable coatings have been formulated to render unparallelled results. These liquid laminates can be used for a range of applications from postcards to large graphic backdrops.Available in one of the widest gloss ranges available for use in roller coaters, ranging from a low of 4 units gloss to a high of 95 units. Available in 1 litre bottles, packaged 2 litres to a box. Also available in 5 litre cases and 208 litre drums. Product Code Name Description ICUVDE Dry Erase High-gloss finish (approx 90 units gloss) that can adhere to all of the most commonly used substrates for this application. Low odour; perfect for interior applications. “Cleanability“ is excellent. ICUVSFSM Superflex Satin Matte A highly advanced satin matte coating with UV-A inhibitors. Has a gloss rating of 30-40 units and has excellent flexibility. Adheres to eco-solvent, solvent, water-based and UV curable inks. Suitable for rigid and flexibile applications. This product is also printable and promotes adhesion between ink and hard to print substrate. ICUVSFG SuperFlex Gloss Gloss coating for flexible UV and solvent coated media. Ideal for short term wrap graphics. Can be thermoformed. This product is also printable and promotes adhesion between ink and substrate. Guaranteed outdoor durable. . ICUVECAS EmeryCoat Anti-Slip Approved to ASTM 2047 standards, textured clearcoat, ideal for use in wet or dry conditions requiring non slip surface. Also great for tradeshow graphics. ICUVPOP POP Low odour, high gloss coating ideal for coating typical flat work, such as corrugated card stock, PVC and foam products printed on a flat bed UV printer or solvent printer. ICUVLMTG* Low Melt Toner Gloss Gloss coating designed to work with wax-infused toner sets like those used with the Konica Minolta 6500. Requires use of ink pretreatment station like that in the VersaCoater™ DocuMate Plus ICUVVCPG* Photo Gloss Innovative gloss coating, designed for traditional photo prints that can be written on, sanded and recoated. Can be embossed. ICUVVCPL* Photo Lustre Innovative lustre coating, designed for digital and traditional photo prints. Can be written on, sanded and recoated. Can be embossed. ICUVVCPM* Photo Matte Innovative matte coating, designed for digital and traditional photo prints. Can be written on, sanded and recoated. Can be embossed. ICUVHCM* Hard Coat Matte A flat matte finish coating that is extremely durable, scratch and chemical resistant, yet has the appearance of a mattee film laminate. ICUVSFTW* Superflex Translucent White High gloss coating with excellent chemical resistance; designed for the litho, digital, and print press market. * = Available on Special Request COMING SOON! 8 E. & O.E. We are working on the development of a number of new coatings that we expect to release in the second half of 2010. Please check our website at www.drytac.com or contact your local representative for latest update. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Drytac Edge Finishing Systems (DES)—For a competitive edge DES-4 and DES-5 Edge Finishing Systems Designed to flush edge all types of display boards. the DES-4 and DES-5 are specifically designed to work with a wide variety of medium to lightweight and heat-sensitive (foam) display boards. These edging systems can enhance your substrates with an inexpensive, yet durable decorative edging while at the same time adding protection against edge damage and warping. Innovative design features, including Programmable Logic Control (PLC) technology, combined with Drytac’s Edge Secure™ adhesive allow the DES-4 and DES-5 systems to apply Drytac PVC edging on boards ranging from 10mm to 45mm in a variety of colours, to both foam and solid-centered display boards such as MDF, Plexiglas, Sintra®/Forex, Kappaboard, Re-board®, X-Board®, Ecoboard® and even 10mm Light Board Product Code Description DES-4 Unique edge banding system for foam boards DES-5 Unique edge banding system for foam boards S6550 Intec 2-HP Dust Collection Cystem for edging systems (DES-1/DES-4/DES-5) DES-4 Creates an attractive, flush edge on all types of graphic boards including foam board. Gatorfoam®, Sintra®/ Forex, Perspex, Kappaboard, ReBoard®, X-Board®, EcoBoard®, and many others. DES-5 CALL US +44 (0)117 958 6500 FOR CURRENT FINANCE OPTIONS E. & O.E. 9 Phone Orders: Fax Orders: Web Orders: Edge Banding for the DES-4 and DES-5 Non-adhesive PVC edge banding for display boards Colours include white, blue, red, chrome, gold and black. Natural edging materials include a natural maple wood veneer and a kraft paper. The natural maple wood veneer is both compostable and recyclable and can be stained, painted or coated with a clear acrylic finish. The kraft paper finish is made of two layers of paper thermally fused together to give it the rigidity needed to apply it to a variety of display boards. This edging can also be painted with low VOC paint if desired. Product Code Description DET58600-WH 16mm x 183m - White DET34600-WH 19mm x 183m - White DET1H600-WH 38mm x 183m - White DET58600-BL 16mm x 183m - Blue DET34600-BL 19mm x 183m - Blue DET1H600-BL 38mm x 183m - Blue DET58600-RD 16mm x 183m - Red DET34600-RD 19mm x 183m - Red DET1H600-RD 38mm x 183m - Red DET58200-CHR 16mm x 76m - Chrome DET58600-BK 16mm x 183m - Black DET34600-BK 19mm x 183m - Black DET1H600-BK 38mm x 183m - Black DEV58500-MA Maple–Wood 16mm x 152m DEV34500-MA Maple–Wood 19mm x 152m DEV1H500-MA Maple–Wood 38mm x 152m DEV13Q500-MA Maple–Wood 45mm x 152m DEP58500 Paper 16mm x 152m DEP34500 Paper 19mm x 152m DEP1H500 Paper 38mm x 152m DEP13Q500 Paper 45mm x 152m Edge Secure Glue Glue pellets to use with all DES-4, DES-5 and DES-6 Edge Finishing Systems Product Code Description EDGE-SECURE Edge Banding Glue 5 Kg CALL US +44 (0)117 958 6500 FOR CURRENT FINANCE OPTIONS 10 E. & O.E. 0845 070 0660 0845 070 0661 www.drytac.com Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com DES-6 DES-6 Edge Finishing System C Profile Edging System for Curved and Straight Boards The DES-6 is a compact, flexible edging system that can apply a C profile edging to both straight-edged display boards and die-cut or digitally cut shaped boards. Programmable logic controller (PLC) technology and a digital display allow precise glue application, edging feed and cutting to make applying edging to eco-boards like Xanita® and Reboard® simple and cost efficient. Great for edging digitally cut, eco-board structures like furniture, shelving and display structures for retail displays and tradeshows. Product Code Description DES-6 C profile edging system for curved and straight board S6550 Intec 2-HP Dust Collection Cystem for edging systems (DES-1/DES-4/DES-5) DES-6 - 10200B 10mm x 60m (200”) DES-6 - 16200B 16mm x 60m (200”) DES-3 Plaque Decor Edge Finishing System (2 stations) This more economical edge finishing system for plaques and block mounts is geared to customers that produce a small to medium volume of plaques and do not need to produce large, oversized plaques. Unlike the DES-1, there is no conveyor belt and the DES-3 system consists of two separate machines. One to apply 45-degree bevel to the MDF or tempered Masonite plaque and one to apply the colored edge foil. Product Code Description DES-3S DES-3 Shaper DES-3F DES-3 Foiler Matte Edge Foils Edge foils for use with the DES-1 and DES-3 plaque decor edge finishing systems. Product Code Description EF001B 20mm BLACK TAPE EF001G 20mm GOLD TAPE EF001S 20mm SILVER TAPE EF001W 20mm WHITE TAPE EF002B 32mm BLACK TAPE E. & O.E. 11 Phone Orders: Fax Orders: Web Orders: EF002G 32mm GOLD TAPE EF002S 32mm SILVER TAPE EF002W 32mm WHITE TAPE 0845 070 0660 0845 070 0661 www.drytac.com NOTE: Drytac® strongly suggests the use of TriMount or MHA adhesive and MediaShield or ArtShield overlaminates for consistent high quality results when producing plaques or block mounts. Compatible Printers: Canon imagePROGRAF Series Epson Stylus Printers HP Designjet Printers HP Scitex FB6700 Océ TCS500 Print Media for Aqueous Printers We carry an extensive line of roll media for aqueous inkjet printers, including eco-friendly and blockout media. FerroJet™ Matte Magnet-Compatible Print Media 228µ A 150 micron printable matte synthetic paper with a 127µ proprietary ferrous “metalized” caoting on the back. Create interchangeable graphic walls by applying Drytac adhesive coated magnetic sheeting to a wall surface (permanent “receptor” surface) which will then allow you, or your customer, to quickly and easily install and replace graphics printed on Ferrojet. Compatible with screenprinting, litho, aqueous, solvent, eco-solvent and uv print technologies. Finishing Recommendations and Information InstaCure Variable Gloss EnduraCoat UltraMural Matte or Photo Matte Product Code Description FJM60075-9 1524mmx22.86m Printable Eclipse™ Matte Coated with our innovative quick-dry inkjet receptive finish, this durable polyester film features an embedded blackout layer that renders the printed film 100% opaque, ensuring no light shows through. When laminated with a film laminate like Interlam Pro™ Emerytex or with a liquid laminate like InstaCure EmeryCoat Anti-Slip, the result is a durable graphic that stands up to handling, rolling and shipping and hangs flat and straight without edge fray. Product Code Finishing Recommendations and Information InstaCure EmeryCoat, InstaCure POP or InstaCure Variable Gloss Interlam Pro Emerytex Description 190µ recommended for roll-up banner stands PRE36100-6L 914mm X 30m PRE42100-6L 1067mm X 30m PRE50100-6L 1270mm X 30m 300µ recommended for pop-up displays 12 E. & O.E. PRE36065-5L 914mm X 20m PRE50065-5L 1270mm X 20m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Printable Eclipse™ Gloss A nanoporous bright white coating delivers vibrant image quality on virtually all models of aqueous inkjet printers. Once printed, this light blocking polyester offers excellent lay-flat properties for banner stand and exhibit graphics. Printed graphics display very good scratch and waterresistance, depending upon the ink formulation. Instant-dry characteristics mean graphics can be laminated immediately and rolled up for transportation. Product Code Finishing Recommendations and Information InstaCure EmeryCoat, InstaCure POP or InstaCure Variable Gloss Interlam Pro Emerytex Description 175µ, recommended for roll-up banner stands PRE36100-7G 914mm X 30m PRE42065-7G 1067mm X 30m PRE50100-7G 1270mm X 30m EarthSmart™ Premium Bond 234µ Extra heavy-weight, (180 gsm) coated bond paper for aqueous inkjet printers. Paired with a biodegradable laminate like our Interlam BioMatte or Interlam BioGloss and a green mount board like Xanita, you can create a completely, biodegradable graphic. Sourced from a mill certified by the Forest Stewardship Council. 100% recyclable and biodegradable. Finishing Recommendations and Information Interlam BioMatte or Interlam BioGloss Product Code Description ESB36100 914mm x 30m (36” x 100’) ESB42100 1066mm x 30m (42” x 100’) ESB50100 1270mm x 30m (50” x 100’) ESB60100 1524mm x 30m (60” x 100’) Panda Print™ Bamboo Fibre Print Media An opaque, curl-free banner fabric made of natural bamboo fibre with a printable coating. provides excellent colour pop and trims evenly without fraying. Does not contain plasticizers and is 100% biodegradable. Available in 914mm and 1270mm widths at 460µ thickness. Compatible with dye pigmented inks, including: HP5000/HP5500/HPZ6100, Canon 8000/9000, Novajet Roland, Mimake and Epson series printers. Product Code Description BAMFAB-36059 914mm X 18m BAMFAB-50059 1270mm X 18m E. & O.E. 13 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Compatible Printers: VUTEk 5330 Epson Stylus Pro GS6000 HP Scitex XL1500 Roland AdvancedJET Mimaki JV Series Océ TCS500 Mutoh, etc. Print Media for Solvent Printers We carry an extensive line of roll media for solvent and eco-solvent printers. Printable Eclipse™ Matte Solvent A fast-drying no-curl graphics media compatible with popular roll-fed eco-solvent or mild-solvent printers. The anti-reflective bright white surface offers superior ink adhesion, as well as scratch and water-resistance. The anti-static backing enhances on-press performance and delivers 98% opacity— ideal for banner stands, pop-ups and event graphics. Product Code Finishing Recommendations and Information InstaCure Ultra Matte, Instacure Emerycoat Interlam Pro Emerytex Description 165µ, recommended for retractable banner stands PRE36100-5S 914mm X 30m PRE42100-5S 1067mm X 30m PRE50100-5S 1270mm x 30m 300µ, recommended for center panels/end caps of pop-up displays and POP banner stands PRE36065-12S 914mm X 20m Panda Print™ Bamboo Fibre Print Media An opaque, curl-free banner fabric made of natural bamboo fibre with a printable coating. provides excellent colour pop and trims evenly without fraying. Does not contain plasticizers and is 100% biodegradable. Available in 914mm and 1270mm widths at 460µ thickness. Compatible with dye pigmented inks, including: HP5000/HP5500/HPZ6100, Canon 8000/9000, Novajet Roland, Mimake and Epson series printers. Product Code Description BAMFAB-36059 914mm X 18m BAMFAB-50059 1270mm X 18m FerroJet™ Matte Magnet-Compatible Print Media 228µ A 150 micron printable matte synthetic paper with a 127µ proprietary ferrous “metalized” caoting on the back. Create interchangeable graphic walls by applying Drytac adhesive coated magnetic sheeting to a wall surface (permanent “receptor” surface) which will then allow you, or your customer, to quickly and easily install and replace graphics printed on Ferrojet. Compatible with screenprinting, litho, aqueous, solvent, eco-solvent and uv print technologies. 14 E. & O.E. Finishing Recommendations and Information InstaCure Variable Gloss EnduraCoat UltraMural Matte or Photo Matte Product Code Description FJM60075-9 1524mmx22.86m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com WindowFX Emerytex® Permanent 5.0 mil. A pressure-sensitive film with a permanent adhesive that can be applied to glass, plexiglas or acrylic in the same manner as conventional adhesive-backed vinyl films. The mattee pebble finish is scuff-resistant and able to withstand fingerprints and abrasion. It is widely used for restaurant dividers, architectural elements, windows and mirrors. Features an aggressive solvent, acrylic adhesive ideally suited for permanent graphics in high-traffic areas. Product Code Description PFR38164 965mm x 50m PFR51164 1300mm x 50m WindowFX Emerytex® Removable 5.0 mil. A pressure-sensitive film with removable adhesive that can be applied to glass, plexiglas or acrylic in the same manner as conventional adhesive-backed vinyl films. The matte pebble finish is scuff-resistant and able to withstand fingerprints and abrasion. It is widely used for restaurant dividers, architectural elements, windows and mirrors. Recommended for signage, window graphics and commercial applications in which the ability to easily remove graphics is desirable. Product Code Description PSTR41164 1040mm X 50m PSTR51164 1300mm X 50m Compatible Printers: Print Media for UV Flatbed Printers Durst Rho VUTEk PV HP Designjet Océ Arizona Mimaki JF-1610 etc. We carry an extensive line of roll media for UV flatbed printers, including rolled rigid substrates like polypropelene. FerroJet™ Matte Magnet-Compatible Print Media 228µ A 150 micron printable matte synthetic paper with a 127µ proprietary ferrous “metalized” caoting on the back. Create interchangeable graphic walls by applying Drytac adhesive coated magnetic sheeting to a wall surface (permanent “receptor” surface) which will then allow you, or your customer, to quickly and easily install and replace graphics printed on Ferrojet. Compatible with screenprinting, litho, aqueous, solvent, eco-solvent and uv print technologies. Finishing Recommendations and Information InstaCure Variable Gloss EnduraCoat UltraMural Matte or Photo Matte Product Code Description FJM60075-9 1524mmx22.86m FerroJet™ Synthetic Paper 177µ A 177µ printable matte synthetic paper with a 125µ propietary ferrous “metalized” coating on the backside. Create interchangeable graphic walls by applying Drytac adhesive coated magnetic sheeting to a wall surface (permanent “receptor” surface) which will then allow you, or your customer, to quickly and easily install and replace graphics on FerroJet. Compatible with screenprinting, litho and digital UV. Finishing Recommendations and Information EnduraCoat UltraMural Matte or Photo Matte Product Code Description FJSP60150-10 1525mm x 45.72m E. & O.E. 15 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Panda Print™ Bamboo Fibre Print Media An opaque, curl-free banner fabric made of natural bamboo fibre with a printable coating. provides excellent colour pop and trims evenly without fraying. Does not contain plasticizers and is 100% biodegradable. Available in 914mm and 1270mm widths at 460µ thickness. Compatible with dye pigmented inks, including: HP5000/HP5500/HPZ6100, Canon 8000/9000, Novajet Roland, Mimake and Epson series printers. Product Code Description BAMFAB-36059 914mm X 18m BAMFAB-50059 1270mm X 18m EarthSmart™ Eclipse 375µ A low density polyethylene blockout banner material for UVflatbed printers. Its high tensile strength and blockout layer make it an ideal choice for durable display and banner stand graphics as well as hanging banners. ASTM certified to be compostable, EarthSmart™ Eclipse can also be recylcyed in commercial plastic recycling programs to become raw materials for products like rubbish bags and landscape fabric. 16 E. & O.E. Finishing Recommendations and Information InstaCure POP or Instacure Variable Gloss Product Code Description ES36328 914mm X 100m ESE36164 914mm X 50m ESE54164 1370mm X 50m ESE54328 1370mm X 100m ESE72164 1828mm x 50m ESE72328 1828mm X 100m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com JetMounter™ Roller Laminators The design of JetMounter™ roller laminators is the culmination of three decades of experience in the mounting and laminating business. Equipped with the performance features our customers demand, JetMounter™ roller laminators are unmatched for value. JetMounter™ JM63Pro Heated top roller laminator gives maximum flexibility. The JM63 is a versatile wide-format roller laminator with roll to roll capability at a price you didn’t think was possible. The addition of the heated top roller allows it to be used with Heatset™ and single-sided thermal overlaminates as well as pressure sensitive laminates and adhesives. Features: • “Hold flat” paper in-feed guide • Top silicone roller has an adjustable temperature range • Large 14cm (5.5”) diameter non-stick silicone rollers • Effective laminating width of 1600mm (63”) • Top and bottom auto-grip supply shafts with brake from room temperature to 120 Celsius (248 F) o o • Auto and foot pedal operation mode • Speed control 0 - 3.65m (12 ft) per minute • Maximum 5.08cm (2”) nip opening • Nip pressure indicator • Fold away front table • Heavy duty lockable casters • Self-checking photo cells for finger protection tension control • Top and bottom wind-up with shafts adjustable speed. • Single mechanical height/pressure adjustment (No compressor needed) • Extra rear windup shaft for rewinding roll to roll • CE approved • Two top mounted emergency stops Product Code Description JM63-PRO 1600mm Note: Delivery charges apply for all equipment. Call for rates. E. & O.E. 17 Phone Orders: Fax Orders: Web Orders: JetMounter™ JM44SHA, JM54SHA, & JM63SHA In addition to the standard features offered by all JetMounter™ electric models, including variable speed electric drive, silicone rollers, all-steel construction, forward and reverse, foot pedal and photo-electric safety stop. The JM54SHA and the JM63 SHA offer single height adjustment controls and an LCD pressure gauge display to allow more precision. The JM63SHA also has a heat assist roller to help jobs run smoothly. All SHA models come with front unwind/ media tray. JM44SHA & JM54 SHA JM63SHA Product Code Description JM44SHA 1117mm (44”) roller laminator JM54-SHAHA 1372mm (54”) roller laminator JM63-SHAHA 1600mm (63”) roller laminator JetMounter™ JM18, JM26 & JM34 Motorized table top laminators operated by a foot switch, leaving both hands free to handle the work being processed. Includes a supply shaft and self-checking photocell for finger protection. Note: There are no rewind shafts on these models. Product Code Description JM18 464mm (18”) roller laminator JM26 667mm (26”) roller laminator JM34 860mm (34”) roller laminator Note: Delivery charges apply for all equipment. Call for rates. CALL US +44 (0)117 958 6500 FOR CURRENT FINANCE OPTIONS 18 E. & O.E. 0845 070 0660 0845 070 0661 www.drytac.com Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Pressure Sensitive Mounting Adhesives We manufacture a full range of pressure-sensitive adhesives for standard mounting projects and specialty applications, such as face mounts, interchangeable graphics and floor graphics. MediaTac™ MediaTac™ consists of a smooth coating of aqueous acrylic adhesive on both sides of a 0.5 mil polyester film carrier. The adhesive’s non-slip release liner allows boards coated with MediaTac™ to stack safely without slippage. MediaTac™ is suited for image decal and high-volume mounting applications, including pre-coating mounting boards. MediaTac™ is also ideal for mounting prints to smooth porous substrates such as foam boards, cardstock, GatorFoam® and tempered hardboard. Product Code Description PSA26-25082 650mm X 25m PSA26-25164 650mm X 50m PSA26-25328 650mm X 100m PSA26-41082 1040mm X 25m PSA26-41164 1040mm X 50m PSA26-41328 1040mm X 100m PSA26-51082 1300mm X 25m PSA26-51164 1300mm X 50m PSA26-51328 1300mm X 100m PSA26-55164 1400mm X 50m PSA26-55328 1400mm X 100m PSA26-61164 1550mm X 50m TransferTac™. Drytac’s economical TransferTac™ adhesive is a carrier-free hot melt adhesive protected by a moisture-stable release liner TransferTac is recommended for use with flexible or rollable substrates. The absence of a carrier makes TransferTac™ selftrimming around most mount boards and irregular shaped items. The thin smooth coating will minimize “orange peel” when applied to ultra smooth mounting boards such as aluminium Product Code Description PSA6941328 1040mm x 100m PSA69-51328 1300mm X 100m BestMount™ Plus BestMount™ Plus consists of a smooth coating of aqueous acrylic adhesive on both sides of a thick 3.0 mil white polypropylene film carrier. The thickness of the carrier makes it easy to work with and helps reduce “orange peel” by concealing minor imperfections in the substrate. BestMount Plus is protected by a new non-slip release liner, so stacks of adhesive-coated boards can be stored without slippage. Product Code Description BMD41328 1040mm X 100m BMD51328 1300mm X 100m E. & O.E. 19 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com TwinTac™ TwinTac™ adhesive is a specially formulated aqueous acrylic adhesive coated on both sides of a 2.0 mil clear PVC (vinyl) film. It has two release liners instead of the usual single release liner. Because TwinTac has two release liners, it is great for cut sheet applications. The double release papers protect the adhesive layer prior to processing, thus preventing contamination during handling. The product is also ideal for the production of adhesive-coated boards. Product Code Description PSA47-25082 650mm X 25m PSA47-25328 650mm X 100m PSA47-41082 1040mm X 25m PSA47-41328 1040mm X 100m PSA47-51082 1300mm X 25m PSA47-51328 1300mm X 100m RemoTac™ Permanent adhesive on the exposed side and a removable adhesive on the other side with release liner. RemoTac™ is ideal for interchangeable signs and graphics for countertop and window surface applications. Product Code Description PSA68-41164 1040mm X 50m PSA68-51164 1300mm X 50m Facemount™ UV Drytac’s Facemount™ UV adhesive is an optically clear pressure sensitive mounting adhesive protected on each side by a clear polyester release liner. It is available with permanent adhesive on both sides, or as a permanent/removable adhesive combination. Facemount UV is engineered for face mounting virtually any image to clear substrates such as PetG™, acrylic, plexiglas and polycarbonate. It is also appropriate for lenticular imaging applications and backlit display transparencies, such as Duratrans™. Product Code Description PSF25082 650mm X 25m PSF41164 1040mm X 50m PSF51164 1300mm X 50m PSF60164 1530mm X 50m PSFR41082 1040mm x 25m (version with removable adhesive) PSFR41164 1040 x 50m (version with removable adhesive) PSFR51164 1300 x 50m (version with removable adhesive) Synart Drytac Synart is our economical optically clear pressure sensitive mounting adhesive. 20 E. & O.E. Product Code Description PSFS25016 650mm x 5m PSFS25082 650mm X 25m PSF41164 1040mm X 50m PSF51164 1300mm X 50m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com WindowTac™ A clear 50µ PVC (vinyl), coated on one side with a removable and repositionable aqueous adhesive and a permanent solvent acrylic adhesive on the other. This repositionable adhesive is protected by a semi-clear, embossed filmic liner with a blue grid pattern. The grid transfers an embossed pattern into the adhesive coating. The permanent adhesive side is protected by a white silicone coated paper liner. WindowTac™ was specifically designed to make facemounting on glass easy. No bubbles, no wrinkles and no need for a wet application using a “soapy” concoction. The micro grooves in the removable adhesive allow easy air evacuation, which facilitates standard application using a squeegee or burnishing pad. WindowTac™ can also be used in “non-facemount” hand applications. Apply the smooth permanent adhesive side to the back/rear of the print and the textured side to the mounting surface. Product Code Description PWD25082 650mm X 25m PWD41164 1040mm X 50m PWD41328 1040mm X 100m PWD51164 1300mm X 50m PWD51328 1300mm X 100m Foot Print Foot Print is a high quality, two part floor graphics system for indoor use. The two parts consist of a no slip, scratch and chemical resistant printable face film and a high traffic adhesive. The system meets accepted slip tests for temporary floor graphics and is resistant to chemical and household cleaners. The adhesive is re-positionable during application, but once it is applied, the bond is secure. Allows for clean and simple removal for up to 6 monthes after application. Product Code Description PFP36164 914mm x 50m (36” x 164’) Printable film for dual aqueous pigment & dye—piezo & thermal PFP48164 1230mm x 50m (48.5” x 164’) Printable film for dual aqueous pigment & dye—piezo & thermal PFP36098WS 914mm x 30m (36” x 100’) Printable film for dual aqueous pigment & dye—piezo & thermal for HP printers PFP47098WS 1210mm x 30m (47.5” x 100’) Printable film for dual aqueous pigment & dye—piezo & thermal for HP printers PFP48164UV 1230mm x 50m (48.5” x 164’) Printable film for UV curing inks PFP39098HTA 1000mm x 30m (39” x 100’) High traffic adhesive PFP50098HTA 1270mm x 30m (50” X 100’) High traffice adhesive Heat-Activated Mounting Adhesive Designed for use on heated roller laminators. MHA™ Multi-Heat Adhesive MHA™ (Multi-Heat Adhesive) is an economical, heat-activated mounting adhesive with a moisture-stable release liner. MHA’s initial tack is very low, making it easy to apply. This feature allows most prints to be repositioned on MHA AdhesiveCoated boards without damage. Once satisfied with the alignment, process the graphic and board through a heated roller laminator (185°F–220°F/85°C–104°C) for a permanent bond. MHA’s forgiving nature has made it a popular product with reprographers for thinner “bond papers” such as graphic renderings, drawings, blueprints, color copies, courtroom displays, etc. Although MHA’s initial tack is low, the bond instantly becomes permanent once processed through a heated roller laminator, making it suitable for flexible and rollable substrates such as expanded PVC graphic materials (e.g. Sintra™). Use MHA in conjunction with Drytac’s MediaShield™ and MHL™ overlaminating films. Product Code Description MHA25328 650mm X 100m MHA41328 1040mm X 100m MHA51328 1300mm X 100m E. & O.E. 21 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Interlam Bio and Interlam Eco Laminates The InterLam Eco range is both environmentally friendly as well as priced very competitively. Made with non-PVC polypropylene base film and a high quality water-based acrylic adhesive, Interlam Bio films have the additional feature of a compostable biodegradable base film. Interlam BioMatte™ 75µ This 75µ overlaminating film consists of a certified biodegradable bio plastic laminating film with an aqueous (water-based) adhesive. The film has a very nice “dead” mattee non-reflective finish. Recommended for use with recyclable or compostable printable media and mount boards. Product Code Description IBM41328 1040mm X 100m IBM49328 1245mm X 100m Interlam BioGloss™ 75µ This 75µ overlaminating film consists of a certified biodegradable bio plastic laminating film with an aqueous (water-based) adhesive. The film has an attractive gloss finish. Recommended for use with recyclable or compostable printable media and mount boards. Product Code Description IBG41164 1040mm X 50m IBG51164 1300mm X 50m Interlam EcoGloss™ 65µ A cost-effective 65µ pressure-sensitive overlaminating film with a reflective gloss finish, resistant to moisture and fingerprints. The polypropylene base film offers good dimensional stability and clarity. Pressure-sensitive aqueous acrylic adhesive. Particularly suitable for laminating and encapsulating high-volume offset printing, blueprints, plain paper copies and other output for POP displays, menu boards, supermarket signage and other graphics where cost is a key factor. Product Code Description IEG41164 1040mm X 50m IEG41328 1040mm X 100m IEG51164 1300mm X 50m IEG51328 1300mm X 100m IEG55164 1400mm X 50m IEG55328 1400mm X 100m Interlam EcoLustre™ 105µ The low-glare surface of this 105µ film is excellent for displaying graphics under direct-lighting environments. It provides low surface sheen without loss of contrast or sharpness. Pressure-sensitive aqueous acrylic adhesive. Effective for photographic prints, POP displays, architectural renderings, promotional displays, event signage and other display applications. Product Code Description IEL41164 1040mm X 50m IEL41328 1040mm X 100m IEL51164 1300mm X 50m Continued on next page 22 E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Interlam EcoLustre™ 105µ (continued) IEL51328 1300mm X 100m IEL55164 1400mm X 50m IEL55328 1400mm X 100m Interlam EcoTex™ 165µ The scuff-resistant, pebble-textured finish of Interlam EcoTex™ UV makes this overlaminating film suitable for graphics where extensive handling may be involved. Pressure-sensitive aqueous acrylic adhesive. Interlam Pro EcoTex™ is particularly suitable for laminating and encapsulating trade show and banner stand graphics, signage displayed in high traffic areas, countermats, placemats and other graphics where a scuff-resistant finish is required and cost is a key factor. Due to its dimensional stability, EcoTex is also ideal for one-sided laminations. Product Code Description IET36328 910mm X 100m IET41164 1040mm X 50m IET41328 1040mm X 100m IET51164 1300mm X 50m IET51328 1300mm X 100m IET55164 1400mm X 50m IET55328 1400mm X 100m Interlam Pro Laminates This range of laminates has a 2-year plus outdoor water-based acrylic adhesive coated on a UV stabilized PVC vinyl base film for conformability, finish and durability. With excellent resistance to UV light, Interlam Pro can be used for both indoor and outdoor applications. NEW Interlam Pro Glossy™ UV 100µ A flexible 100µ PVC (vinyl) overlaminating film coated with a pressure-sensitive, aqueous acrylic adhesive. Its gloss finish enhances image colours, as well as UV protection for indoor and short-term outdoor graphics. This product is recommended for use on flexible media and substrates wherever a gloss finish is required. NEW Product Code Description ILG41164 1040mm x 50m ILG41328 1040mm X 100m ILG51164 1300mm x 50m ILG51328 1300mm X 100m ILG55164 1400mm x 50m ILG55328 1400mm X 100m ILG6114 1500mm x 50m E. & O.E. 23 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Interlam Pro Matte™ UV 100µ This non-glare, PVC (vinyl) mattee overlaminating film is coated with a pressure-sensitive aqueous acrylic adhesive. Interlam Pro Matte™ will eliminate reflection while maintaining colour contrast and detail. It also provides UV protection for indoor graphics and short-term outdoor graphics. Recommended for situations where a non-glare finish is required. It is ideal for POP displays, courtroom displays, aisle danglers and other signage applications that will be viewed under direct lighting. NEW Product Code Description ILM41164 1040mm X 50m ILM41328 1040mm X 100m ILM51164 1300mm X 100m ILM51328 1300mm X 100m ILM55164 1400mm X 100m ILM55328 1400mm X 100m ILM61164 1550mm X 50m Interlam Pro Lustre™ UV 100µ A PVC (vinyl) overlaminating film coated with a pressure-sensitive aqueous acrylic adhesive. This film reduces undesirable surface glare while providing a lustre finish. It offers UV protection for indoor and outdoor graphics. Recommended for laminating and encapsulating graphics that will be viewed under direct lighting conditions. Low sheen without loss of contrast or sharpness makes Interlam Pro Lustre UV effective for high-volume photographic prints, POP displays, architectural renderings, promotional displays and event signage. Product Code Description ILL41164 1040mm X 50m ILL41328 1040mm X 100m ILL51164 1300mm X 50m ILL51328 1300mm X 100m ILL55164 1400mm X 50m ILL55328 1400mm X 100m ILL61164 1550mm X 50m Interlam Pro Emerytex® UV 125µ–Floor Graphic Approved A non-glare, scuff-resistant PVC (vinyl) overlaminating film coated with a pressure-sensitive, aqueous acrylic adhesive. Its scuff-resistant, pebble texture finish renders it suitable for graphics where extensive handling may be involved as well as floor graphics. It offers UV protection for indoor and outdoor graphics. Recommended for trade show graphics, POP displays, mouse pads, counter mats, event signage, floor graphics and other signage where a scuff-resistant finish is required. 24 E. & O.E. Product Code Description ILT35164 880mm X 50m ILT35328 880mm X 100m ILT36164 910mm X 50m ILT36328 910mm X 100m ILT41164 1040mm X 50m ILT41328 1040mm X 100m ILT51164 1300mm X 50m ILT51328 1300mm X 100m ILT55164 1400mm X 50m ILT55328 1400mm X 100m COMING SOON! Drytac will soon be offering a 1500mm wide roll of Interlam Pro Emerytex® UV 125µ. Please check our website at www.drytac.com or contact your local representative for latest update. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Protac™ Laminates This broad range of laminates consist of PVC, polyester and polycarbonate base films with a generous coating of solvent based acrylic cross linking adhesive for the most demanding applications. Protac™ Glossy UV 100µ. A clear glossy PVC (vinyl) overlaminating film coated with an aggressive, pressure sensitive solvent acrylic adhesive supported by a high quality paper release liner. The clear gloss finish actually adds vibrancy to colors in underlying images. This PVC-based overlaminating film is ideal for use with a wide range of flexible media and substrates wherever a gloss finish is required. Product Code Description PLG25082 650mm X 25m PLG25328 650mm X 100m PLG41164 1040mm X 50m PLG41328 1040mm X 100m PLG51164 1300mm X 50m PLG51328 1300mm X 100m PLG55164 1400mm X 50m PLG55328 1400mm X 100m Protac™ Ultra Gloss UV 75µ A mirror-like finish enhances both color and contrast. This high performance polyester overlaminating film is coated with an aggressive pressure-sensitive solvent acrylic adhesive and is backed by a high quality clear polyester release liner. Adds depth and detail to graphic images, whether photographic, inkjet, or other output media. Protac™ High Gloss UV is also the recommended film for photo competition prints, POP graphics, or anywhere a high-gloss, almost mirror-like finish is desired. Product Code Description PLHG25082 650mm X 25m PLHG41164 1040mm X 50m PLHG51164 1300mm X 50m PLHG60164 1530mm X 50m Protac™ SheenTex UV 105µ A textured satin overlaminating film with a solvent acrylic adhesive. Recommended for trade show graphics, POP displays, mouse pads, counter mats, event signage and other graphics where a scuff resistant finish is required. Product Code Description PS-TM35164 880mm X 50m PS-TM35328 880mm X 100m PS-TM41164 1040mm X 50m PS-TM41328 1040mm X 100m PS-TM51164 1300mm X 50m PS-TM51328 1300mm X 100m PS-TM61164 1550mm X 50m E. & O.E. 25 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Protac™ Matte UV 100µ Protac™ Matte™ UV is a non-glare, mattee PVC (vinyl) overlaminating film, coated with a solvent-based pressure-sensitive acrylic adhesive. This high quality mattee film eliminates reflections, while maintaining color contrast and detail. Protac™ Matte UV is recommended for situations where a non-glare finish is required or specific lighting conditions cannot be controlled. It is ideal for images such as trade show and POP displays that will be viewed under direct lighting from many different angles. Product Code Description PLM25082 650mm X 25m PLM25328 650mm X 100m PLM41082 1040mm X 25m PLM41164 1040mm X 50m PLM41328 1040mm X 100m PLM51082 1300mm X 25m PLM51164 1300mm X 50m PLM51328 1300mm X 100m PLM55164 1400mm X 50m PLM55328 1400mm X 100m PLM61164 1550mm X 50m Protac™ Lustre UV 75µ A clear lustre PVC (vinyl) overlaminating film coated with an aggressive, pressure-sensitive solvent acrylic adhesive supported by a high quality paper release liner. The low sheen finish minimizes glare without loss of contrast or sharpness. Recommended for high resolution photographic quality images that will be viewed under direct lighting conditions. Its many applications include trade show displays and courtroom presentations. Protac™ Lustre™ is ideal for laminating vinyl media. Product Code Description PLL25082 650mm X 25m PLL25328 650mm X 100m PLL41082 1040mm X 25m PLL41164 1040mm X 50m PLL41328 1040mm X 100m PLL51082 1300mm X 25m PLL51164 1300mm X 50m PLL51328 1300mm X 100m PLL55164 1400mm X 50m PLL55328 1400mm X 100m PLL61164 1550mm X 50m Protac™ Emerytex® UV 125µ A pressure-sensitive, non-glare, scuff-resistant PVC (vinyl) overlaminating film with a pebble finish and a high-tack solvent acrylic adhesive that deters tunneling. The scuff-resistant finish makes this overlaminating film ideal for applications where extensive handling may be involved. Finish is similar to velvet mattee Lexan™. Excellent for laminating mounted prints that will be placed in high-traffic indoor display areas including trade show, exhibit and other graphics applications. It is also suitable for laminating mouse pads, counter graphics and other similar applications. Product Code Description PST25082 650mm X 25m PST25328 650mm X 100m Continued on next page 26 E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Protac™ Emerytex® UV 125µ (continued) PST35328 880mm X 100m PST36328 910mm X 100m PST41082 1040mm X 25m PST41164 1040mm X 50m PST41328 1040mm X 100m PST51082 1300mm X 25m PST51164 1300mm X 50m PST51328 1300mm X 100m PST55164 1400mm X 50m PST55328 1400mm X 100m Protac™ Emerytex® Fire Retardant The same product as Protac™ Emerytex above but with special additive to meet British Standards 476: Part 7: 1997 fire tests on building materials and structures. (method for classification of the surface spread of flame of products). Product Code Description PFR41328 1040mm X 100m PFR51328 1300mm X 100m PFR55328 1400mm X 100m Protac™ Anti-Graffiti UV 36µ Protac™ Anti-Graffiti™ UV is an outdoor, “anti-graffiti” film that wipes clean of virtually any spray paint. The satin finish also provides a high degree of resistance to ultraviolet light, dirt and pollutants. It offers superb clarity, detail and color contrast. It can also be cleaned with solvents without any adverse effects. Product Code Description PBE54164 1372mm X 50m Protac™ Ice 125µ. Protac™ Ice has the same scuff-resistant properties as a sand textured laminate, but with a heavier, crystal-like finish that uniquely resembles crushed ice Product Code Description PIC25082 650mm X 25m PIC51082 1300mm X 25m E. & O.E. 27 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Protac™ Steel 100µ. Unlike anything you’ve seen before, Protac™ Steel UV simulates a brushed metal effect. Product Code Description PSL25082 650mm X 25m PSL51082 1300mm X 25m Protac™ Deep Textured Canvastex UV 250µ This embossed PVC (vinyl) overlaminating film has a pronounced coarse canvas texture. Its additional thickness offers a more visible canvas texture than any comparable film on the market. Product Code Description ICX25164 650mm X 25m ICX51164 1300mm X 25m Protac™ Hessian UV 215µ. A heavy-texture film, this special finish resembles hessian or canvas. Protac™ Hessian is ideal for use with portrait photographs, framed mats, certificates, diplomas, book and album covers and fine art inkjet prints. Product Code Description PHS25082 650mm X 25m Protac™ Canvastex UV 125µ Protac™ Canvastex™ UV is a premium, embossed PVC (vinyl) overlaminating film coated with a pressure-sensitive solvent acrylic adhesive. The textured surface imparts the look of canvas to prints and provides additional UV protection. Product Code Description PCT25082 650mm X 25m PCT51082 1300mm X 25m Protac™ Linentex UV 125µ Protac™ Linentex™ is an embossed PVC (vinyl) overlaminating film coated with a pressure-sensitive solvent acrylic adhesive. Its non-glare finish simulates a linen-like texture. 28 E. & O.E. Product Code Description PLN25082 650mm X 25m PLN51082 1300mm X 25m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Protac™ Scribe 65µ Creates a dry erase surface on any print. Common applications include reusable presentation boards, schedules, vacation planners, maps and courtroom displays. Protac™ Scribe can also be used in conjunction with our popular Drytac Ferro™ to create a dry-erase magnet-receptive presentation board. Product Code Description POP25082 650mm X 25m POP25328 650mm X 100m POP41082 1040mm X 25m POP41328 1040mm X 100m POP51082 1300mm X 25m MediaShield Heatset® Laminates MediaShield™ UV HeatSet® (also referred to as heat assist) laminating films are often described as a hybrid between thermal and pressure-sensitive films. MediaShield™ films bond well to inkjet output with high ink coverage—even on photo gloss paper and digital photo laser output (Lambda®/LightJet®). The image can be trimmed flush, or even die-cut without fear of delamination. Due to its quick setup/curing time, MediaShield™ laminated graphics can be handled or rolled immediately after processing. MediaShield™ films are an excellent choice for laminating UV flatbed printer output due to its bonding and conformability characteristics. MediaShield Satinex™ UV 75µ MediaShield Satinex™ UV is one of Drytac’s most versatile overlaminating films, offering a broad range of applications. This HeatSet™ PVC (vinyl) overlaminating film has a semi-gloss finish, which enhances color saturation and contrast. Product Code Description SX41164 1040mm X 50m SX41328 1040mm X 100m SX51164 1300mm X 50m SX51328 1300mm X 100m MediaShield Mattex™ UV 75µ MediaShield Matteex™ UV is an extremely versatile Heat-Set™ overlaminating film that adds a desirable satin-matte finish without sacrificing colour definition. Product Code Description MX41328 1040mm X 100m MX51328 1300mm X 100m MX55328 1400mm X 100m E. & O.E. 29 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com MediaShield Matte™ UV 100µ MediaShield Matte™ UV overlaminating film offers a non-glare, mattee finish without sacrificing color definition. It is perhaps the highest quality mattee laminating film on the market today. MediaShield Matte UV is a PVC (vinyl) overlaminating film coated with a solvent acrylic adhesive. Product Code Description MT41328 1040mm X 100m MT51328 1300mm X 100m MT55164 1400mm X 50m MediaShield Deep Textured Canvastex™ UV 215µ This is a premium, embossed PVC (vinyl) overlaminating film with a pronounced coarse canvas texture. Its additional thickness offers a more visible canvas texture than any other comparable film on the market. Product Code Description CX25082 650mm X 25m CX51082 1300mm X 25m CX51328 1300mm X 100m MediaShield™ Gloss UV 56µ MediaShield™ Gloss is a bright polyester overlaminating film that provides an excellent glossy finish to virtually any output. This economical overlaminating film is coated with a solvent acrylic adhesive, protected by a silicone coated paper release liner. Product Code Description GL41328 1040mm X 100m GL51164 1300mm X 50m GL51328 1300mm X 100m MediaShield™ Emerytex UV 125µ MediaShield Emerytex™ UV is a scuff-resistant PVC (vinyl) overlaminating film with a pebble-textured mattee finish (a similar finish to velvet mattee polycarbonate). This film is coated with a solvent acrylic adhesive and is protected by a single moisturestable paper release liner. Approved for floor graphics! 30 E. & O.E. Product Code Description ET35164 965mm X 50m ET35328 965mm X 100m ET51164 1300mm X 50m ET51328 1300mm X 100m ET55164 1400mm 50m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Thermal Overlaminates (Encapsulation Films) Our line of thermal laminating films are suitable for single sided, double sided (encapsulation) or decal style (adhesive bottom/ laminate top) applications. A low activation temperature and better clarity resulting from a higher polyester ratio. MHL™ Gloss UV 125µ Superior clarity and lower activation temperatures are two key features of this polyester laminating film. Product Code Description MHPG41328 1040mm X 100m MHPG55328 1300mm X 100m MHL Matte™ UV 125µ MHL Matte™ eliminates reflection and glare while hiding minor imperfections in the output. MHL Matte 5 mil provides moderate UV protection for indoor and short-term outdoor graphics. Product Code Description MHPM41328 1040mm X 100m MHPM55328 1300mm X 100m MHL Frost™ UV 150µ MHL Frost™ UV is a low-glare, low-temp overlaminating film. The unique crystal-texture finish (similar to velvet Lexan™) renders this film resistant to abrasion and fingerprints. It provides moderate UV protection for indoor and short-term outdoor graphics. Product Code Description MHF35164 880mm X 50m MHF41164 1040mm X 50m MHL Eclipse™ UV 125µ MHL Eclipse™ UV is a low-glare, low-temp overlaminating film. The unique crystal-texture finish (similar to velvet Lexan™) renders this film resistant to abrasion and fingerprints. It provides moderate UV protection for indoor and short-term outdoor graphics. Product Code Description MHE35164-5 880mm X 50m MHE41164-5 1040mm X 50m MHL Eclipse™ UV 250µ MHL Eclipse™ UV is a low-glare, low-temp overlaminating film. The unique crystal-texture finish (similar to velvet Lexan™) renders this film resistant to abrasion and fingerprints. It provides moderate UV protection for indoor and short-term outdoor graphics Product Code Description MHE35164-10 880mm X 50m MHE41164-10 1040mm X 50m E. & O.E. 31 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Backing Materials These films are typically used in encapsulation style applications on the back of images to increase thickness, stiffness or improved handling. Protac™ Rigid (UPVC) White Backing An opaque white rigid vinyl film coated with an aggressive cross-linking, pressure-sensitive, solvent acrylic adhesive that deters “tunneling”. Ideal for backing all types of prints, but is ideally suited for pop-up booths and reverse-print polycarbonate inkjet media. The combination of these two products will produce a rigid, yet rollable display that can stand up to the most demanding display conditions. Product Code Description PWB51164 1300mm X 50m PWB16-41164 1040mm X 50m PWB16-51164 1300mm X 50m 250µ 350µ Protac™ Eclipse 305mic An opaque flexible polyester white backing film, coated with a pressure-sensitive, solvent acrylic adhesive. Ideal for portable banner stands, POP and other semi-supported display graphics. Combined with a reverse print media, Protac™ Eclipse creates a durable graphic with excellent hanging characteristics, free from edge curl and fraying. 32 E. & O.E. Product Code Description PEC35164-10 880mm X 50m PEC51164-10 1300mm X 50m Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Magnetic and Magnetic Receptive Products Our line of magnetic substrates, magnet-receptive primers and printable magnet-compatible materials can be combined to create innovative changeable graphic environments or simply used as individual components in a wide range of display applications. FerroCoat Magnet-Compatible Wall Primer Paint A commercial grade latex coating that transforms almost any wall into a magnet receptive surface. Readily accepts magnets, magnetic sheeting and items with magnetic tape such as picture frame moulding. Apply with short nap roller or foam applicator tool. Product Code Description FC-G 1 GALLON (4LTR APPROX) FC-Q 1 QUART (1LTR APPROX) Ferro™ Magnet Compatible Metal Paper A lightweight magnet-receptive material with a smooth white paper finish. When graphics are printed on Ferro and mounted, magnets and small objects with magnets will stick to the graphic surface. Also available in an adhesive coated version. Product Code Description DFE36082 914mm X 25m DFA36082 914mm x 25m Magnetic Sheeting A multipurpose white ink receptive vinyl suitable for solvent inkjet, UV or screen printing. This product can be used to produce magnetic vehicle graphics or any graphic that will be applied to any surface where a magnet will stick, including walls painted with FerroCoat magnetic compatible primer. Product Code Description DMS2450 619mm X 15m DMS39033 1000mmx10m Adhesive Coated Magnetic Sheeting Magnetic sheeting coated with adhesive on one side. This is the recepter surface for FerroJet. Product Code Description DMSA2450 619mm x 15m Drytac Magnetic Tape A & B for Pop-Up Display Booths Drytac Magnetic Tape A & B consists of two magnetic tapes of opposite polarity, each coated with a permanent pressuresensitive adhesive on one side. Due to their opposing polarity, the two components will align perfectly. Both types are 60.5 mil thick and 13 mm (1/2” ) wide. Product Code Description DMT1300 “A” Side “A” 13mm X 30m DMT1310 “B” Side “B” 13mm X 30m Edge-to-Edge Magnetic Tape A unique wide tape with magnetic edges rather than a magnetic face. Because the edges are of opposite polarity, tape strips butt up to each other without overlapping, connecting graphics or panels seamlessly. One face is coated with pressuresensitive adhesive for mounting the tape to graphics or panels. Product Code Description DMJ1432 7mm X 10m E. & O.E. 33 Phone Orders: Fax Orders: Web Orders: FerroJet™ Matte Magnet-Compatible Print Media 150µ FerroJet™ magnet-compatible media is direct printable using most aqueous inkjet printers. Apply to FerroCoat™ painted walls using two-sided magnetic strips or tiles; or apply directly to magnetic sheeting mounted surfaces. Finishing Recommendations and Information InstaCure Variable Gloss EnduraCoat UltraMural Matte or Photo Matte Product Code Description FJM60075-9 1524mmx22.86m FerroJet™ Synthetic Paper A 7 mil printable matte synthetic paper with a 125µ propietary ferrous “metalized” coating on the backside. Create interchangeable graphic walls by applying Drytac adhesive coated magnetic sheeting to a wall surface (permanent “receptor” surface) which will then allow you, or your customer, to quickly and easily install and replace graphics on FerroJet. 0845 070 0660 0845 070 0661 www.drytac.com Finishing Recommendations and Information EnduraCoat UltraMural Matte or Photo Matte Product Code Description FJSP60150-10 1525mm x 45.72m E. & O.E. 34 E. & O.E. Phone Orders: Fax Orders: Web Orders: Panda Stand Retractable 0845 070 0660 0845 070 0661 www.drytac.com Panda Folding Literature Stand and Panda Zip Up Panda L Stand Panda Stand™ Eco Friendly Bamboo Display Products The retractable Panda Stand™, the L-Framed Panda L Stand™ and the accompanying literature stands are all constructed of up to 95% bamboo, a fast-growing, renewable resource. An elegant look and environmentally friendly choice. Displays measure 800mm by 2000mm tall. Suggested print media: Panda Print™ Bamboo Fibre Print Media. Besides the environmental benefits of using a literature display made of bamboo, both the Panda Bamboo Literature Stand and the Panda Zip are significantly lighter than similar stands made from conventional materials. The 8 pocket literature stand weighs only 8 pounds! Both stands come with sturdy canvas carrying cases for transport and storage. Product Code Description PAN-1080 Bamboo roll-up with bag PANL-1080 Bamboo L-stand with bag PAN-LH Bamboo literaure stand with bag PAN-ZU Panda Zip Up 273mm x 1664mm made of bamboo hardwood E. & O.E. 35 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com General Graphics Accessories Drytac Mule™ and Whip A safe and convenient mobile storage cart, the Drytac Mule™ holds up to 12 rolls of overlaminating films, mounting adhesives and print media. It fits through standard commercial doors (914 mm), holds up to 363 kg and accommodates 51mm and 76mm cores. Mule purchase includes the Whip™, an accessory which allows easy lifting of overlaminating films and media rolls from the Mule or the floor. Product Code Description MUL0012 MULE HOK0012 WHIP Steel Edge Purple Safety Ruler & Steel Edge T Square Featuring a stainless steel cutting edge, heavy-duty aluminum construction, curved finger guard, non-slip backing to prevent slippage and a new anodized purple finish that does not show fingerprints. Product Code Description ACC9058 710mm ACC9065 1016mm ACC9068 1320mm ACC9075 1625mm ACC9080 2438mm Cutting Mat A triple layer, self-healing PVC (vinyl) mat with grid designed to protect work surfaces from unforgiving blades or knives. 36 Product Code Description A2174 620mm X 900mm A2176 1000mm X 1500mm A2179 1000mm X 2000mm E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Magnetic Laminator Caddy Keeps gloves, eraser blocks, tape measures, Zippy Cutters™and pencils close at hand, yet away from the laminator nip and emergency stops. Strong rubber covered magnets attach the black basket firmly while protecting the surface finish. Product Code Description ACC6000 One Size Zippy Cutter™ The blade on this safety knife is fully enclosed by a molded plastic handle to protect fingers and silicone rollers. Designed for cutting films and adhesives still webbed on the laminator. Product Code Description ZC8010 Zippy Cutter™ ZC8011 Replacement blades (pk of 12) Olfa™ Standard Cutter OLFA™ Knives Utility cutters with snap-off blades Olfa™ L-2 HD Cutter Product Code Description ZC8020 Standard Knife ZC8021 Std Spare Blades ZC8030 Heavy Duty Knife ZC8031 HD Spare Blades ZC8050 Heavy Duty Plastic & Lam ZC8051 Spare Blades for HDPL ZC8055 Mount Board Cutter ZC8056 Spare Blades for MBC ZC8065 Extra Length Heavy Duty E. & O.E. 37 Phone Orders: Fax Orders: Web Orders: Leather Knife Pouch 0845 070 0660 0845 070 0661 www.drytac.com Always keep your knife within reach with this leather knife pouch. Attaches to your belt with a snap closure. Knife sold separately. Product Code Description ACC9715 Drytac® Leather Knife Pouch DRS Roller (Dust Removal System) The Dust Removal System (DRS) Roller removes dust and dirt from prints, substrates or film without leaving a tacky residue. Clean the DRS roller by rolling it over the special adhesive pad. Steel yoke handle construction provides extra durability for production situations. A great tool for any mounting or finishing department. Adhesive pad and roller sold separately. Product Code Description ACC9050 DRS ROLLER PCRPAD Replacement Pads Anti-Static Wisk™ The Anti-Static Wisk™ cleans your prints prior to lamination by dissipating static. The special conductive fibers gently whisk away harmful dust, lint and dirt. Grounding cord included. Product Code Description ACC9610 279mm Anti-Static Cloth A dry, lint-free, knitted blend of non-toxic, soft synthetic fiber and nonabrasive conductive filament. Sold individually. 38 Product Code Description ACC9600 254mm X 457mm E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com TacCloth™ Improves finishing results and minimizes imperfections due to surface contaminants. Slightly tacky, this lint free cloth is designed to wipe down foam board, GatorFoam®, MDF, hardboard and other mounting substrates. Store TacCloth™ in a sealed storage bag when not in use to prevent loss of tack characteristics. Product Code Description ACC9602 PKT OF 25 Anti Static Gloves With special conductive fibers to dissipate electrostatic charges while eliminating fingerprints. Product Code Description ACC9605 2 PAIRS Media Handling Gloves Designed to prevent fingerprints and skin oils from marring expensive prints. Product Code Description ACC9608 5 PAIRS Squeegee Roller A small hand-held tool used to expel air trapped on the surface or around the pre-laminated edges of prints. It is an ideal tool when working with pressuresensitive films and adhesives. Product Code Description ACC9055 102mm Burnishing Pads An indispensable tool for removing air bubbles in films without scratching surfaces. These rigid felt pads are also ideal for wrapping films around corners and edges. Product Code Description ACC9057 PKT OF 4 E. & O.E. 39 Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Window Squeegee Silver, hard-edge plastic squeegee is specially designed for applying vinyl film to windows, vehicles, signs and other graphic substrates. The smooth but rigid edges smooth down films and remove air bubbles without scratching the surface. Made of reinforced nylon. Product Code Description ACC9056 7cm X 10cm Eraser Block™ Specially designed for multi-heat laminators, this large, rubber cleaning block removes adhesive residue from roller surfaces. Product Code Description ACC9010 2 PER PKT Banner Ups® PowerTape™ Reinforced banner edges without folding or sewing a hem. Just strip and punch. Product Code Description ACC9350 PowerTape™ 38mm x 33m Foam Tape 0.8mm thick foam carrier coated on both sides with an ultra-aggressive solvent rubber pressure sensitive adhesive. Product Code Description ACC9510 25mm X 66m Velcro® Tapes A variety of adhesive-backed Velcro® tapes for finishing banners and installing graphics into bannerstands. 40 Product Code Description A3010 Hook 20mm X 25m A3030 Loop 20mm X 25m E. & O.E. Phone Orders: Fax Orders: Web Orders: 0845 070 0660 0845 070 0661 www.drytac.com Sales Terms and Conditions ORDER ACCEPTANCE All orders received are subject to acceptance by Drytac and are governed by Drytac’s Standard Terms and Conditions of Sale (A complete copy is available upon request.) PRICING Goods are charged at the price shown on the product page on the date the order is placed. The price shown excludes VAT. Prices are correct at time of publication. It is the customer responsibility to establish current prices at the time of order. Drytac reserves the right, by giving notice to the customer at any time before delivery, to increase any prices for goods to reflect any increases in the cost to Drytac of supplying the goods due to any factor beyond the control of Drytac (such as, without limitation, any foreign exchange fluctuation, significant increase in the costs of labour, raw materials or other costs of manufacture). Errors and omissions are accepted. DELIVERY INFORMATION Delivery charges are calculated per order and via the most economical method at the discretion of Drytac. All orders placed to the value of £75 or over before VAT will be shipped free of charge within the UK. All UK orders placed before 2pm, if in stock, will be shipped for standard delivery to arrive for the next working day between the hours of 9am and 5.30pm. Standard delivery for Northern Ireland may take 2-3 working days.The customer will be contacted if any items are out of stock within one working day and any possible alternatives will be suggested if available. Any request by the customer for special delivery may be arranged by Drytac at the customers expense. In no circumstance shall Drytac be responsible for any delays or guarantees provided by the freight company. LOSS/DAMAGE/SHORTAGES Drytac is not responsible for loss, damage or any delay in transit. It is the responsibility of the Buyer to immediately inspect all deliveries for loss or damage. In the event that there is evidence of loss or damage, a notation to this effect must be noted on the carrier’s waybill. The carrier should be notified by telephone and in writing. All claims should be made directly with the carrier, but we will be happy to assist. Drytac must be advised within 24 hours of receipt of shipment of any claims for shortages or damage. PAYMENT Payment can be made as follows: • 1. All major credit cards. • 2. Open Account – payment due 30 days end of month for UK customers who have pre-established credit, any account in arrears by 15 days or more will not be shipped until payment is made. Payment due 30 days from date of invoice for all Export (non US, UK or Canada customers) with pre-established credit. LIMITED WARRANTY AND LIABILITY All statements, technical information and recommendations made by Drytac and its employees, agents, affiliates, and subsidiaries are based on our research and are believed to be accurate, but do not constitute a guarantee or warranty. All Drytac products are sold with the understanding that the Purchaser has independently determined the suitability of such product for their particular purpose under their own operating conditions. (Note: All specifications are subject to change without notice). The Purchaser assumes all risk and liability whatsoever in connection with their use of any Drytac product. The products in this price list are sold without any warranty as to merchantability or fitness for a particular use or any other warranty expressed or implied. No Drytac employee or representative has any authority to waive or change the foregoing provisions, and no statement or recommendation not contained herein shall have any force or effect unless made in writing and signed by an officer of Drytac. The following is made in lieu of all warranties, expressed or implied. Drytac’s only obligation shall be to replace or credit such quantity of the product proven to be defective at its discretion. In no event shall Drytac be responsible for any incidental or consequential damages whether foreseeable or not caused by defects in such product and whether or not such damage is caused by Drytac’s negligence. RETURNS Drytac will not accept any returns for any reason without prior authorization. Such authorization is by way of a Return Authorization (RA) number and such number must be clearly marked on both the product(s) being returned and the exterior of all packaging. Return authorization does not constitute that a credit will automatically be issued and returns for reasons other than defects are subject to a 20% re-stocking charge. All returns to Drytac are to be shipped freight prepaid. No returns will be accepted after 60 days from date of invoice. E. & O.E. 41 Phone Orders: Fax Orders: Web Orders: NOTES 42 E. & O.E. 0845 070 0660 0845 070 0661 www.drytac.com Visit www.drytac.com or call 0845 070 0660 for more information.