Transcript
V1412 Series Large Extruded Aluminum Housing
Extruded die-cast aluminum large camera housing for outdoor applications with heater and wiper options DESCRIPTION Infinova’s V1412 series is a die-cast weatherproof housing for outdoor installations. The internal dimensions make it suitable for large cameras equipped with a wide range of lenses. The body is made of extruded aluminum and the end-cover plates are made of die-cast aluminum. Weatherproof features are ensured by the extruded aluminum sunshield, the EPDM-rubber end-gasket between the end-cover plates and the body, and three cable glands with their specific gaskets. Installation and adjustments of the camera are made easy due to the ability to remove the body, leaving the internal slide in working position for easy operation. A wide range of accessories are available, including a heater kit, a blower kit, a camera power supply, a wiper and accessories are supplied as a simply plug-in kit for an easy installation. The housing can be utilized for a variety of applications, such as traffic and highway monitoring.
Dimensions (Unit: mm):
FEATURES y y y y y y
Indoor/Outdoor installations Built-in aluminum and epoxy powder painted Accommodate large lenses Wide range of accessories available Solid and reliable Weatherproof Standard IP66
SPECIFICATIONS General Structure: ORDERING INFORMATION V1412-14SH-C
Camera housing, indoor/outdoor, 14 inch internal, sunshield, heater (12 VDC / 24 VAC), 3+1 and 6+1 poles connectors and 1 BNC complete with prewired cable for video input
Environment: Environmental Rating:
V1412-14SHX-C
Camera housing, indoor/outdoor, 14 inch internal, sunshield, heater (110 ~ 230 VAC), 3+1 and 6+1 poles connectors and 1 BNC complete with prewired cable for video input
V1412-18SH-C
Camera housing, indoor/outdoor, 18 inch internal, sunshield, heater (12 VDC / 24 VAC), 3+1 and 6+1 poles connectors and 1 BNC complete with prewired cable for video input
V1412-18SHX-C
V1412-W1 V1412-W2 V1412-WP1-T5 V1412-WP2-T5
Infinova ·
Blower With Air Filter and Thermostat:
Camera housing, indoor/outdoor, 18 inch internal, sunshield, heater (110 ~ 230 VAC), 3+1 and 6+1 poles connectors and 1 BNC complete with prewired cable for video input
Blower kit for housing V1412, includes power supply (110 ~ 230 VAC to 12VDC) Wiper kit for housing V1412, 24 VAC Wiper kit for housing V1412, 230 VAC Washer pump 24VAC and 5 liters (1 gallon) tank Washer pump 230VAC and 5 liters (1 gallon) tank
51 Stouts Lane, Monmouth Junction, NJ 08852 USA · Specifications and appearance are subject to change without notice.
www.infinova.com ·
24 VAC consumption 20 W (maximum) without blower 230 VAC consumption 40 W (maximum) without blower
Temperature Controlling Heater:
ACCESSORIES V1412-BK2
Electrical Input Voltage:
Die-cast aluminum back and front cover plates Extruded aluminum body for the internal slide Epoxy polyester powder paint Stainless steel external screws Indoor/Outdoor IP66
Turns on at 15° C ± 3° C (59° F); Turns off at 22° C ± 3° C (71° F) Turns on off at 35° C ± 3° C (95° F); Turns off at 22° C ± 3° C (71° F)
Mechanical Operating Temperature: -4° F to +122° F (-20° C to +50° C) w/heater Glass Window (WXH): 3.7” X 3.1” (94 mm X 80 mm) Internal usable dimensions: 14 X 5.2 X 3.4 inches (LxWxH) 358 X 134 X 88 mm (LxWxH) External dimensions: 23.2” X 6.9” X 6.6” (LxWxH) 590 X 175 X 168 mm (LxWxH) Weight: 9.4 lbs. (4.7 kg)
Toll-free US: 1-888-685-2002 ·
Tel: 1-732-355-9100 ·
Fax: 1-732-355-9101 ·
E-mail:
[email protected] 9/19/2006
