Transcript
EyeNut Sensor Recessed, ceiling-mounted sensor allowing occupancy and daylight harvesting control strategies to be employed within EyeNut. Includes PIR motion detector which allows detection of room occupancy. EyeNut software allows occupancy configuration in presence or absence mode. Includes photocell for ambient light detection, and adjustment of luminaire dimming within the EyeNut system. Based on ZigBee Home & Building Automation protocol Sensor signals are transmitted wirelessly and therefore no additional wiring is required to the system apart from the mains input.
Product Description • Ambient light detection • Occupancy detection
Presence Detection Coverage
• RFID enabled for fast/error free commissioning (coming soon) • Universal Input AC mains Voltage • Tool free ceiling Mount • Support Over The Air (OTA) updates
EyeNut, our award winning indoor lighting control and monitoring system is revolutionising indoor lighting. Compatibility with ZigBee as standard.
EyeNut has been developed by our UK based research and development team and uses ground-breaking wireless technology to cut carbon emissions and reduce energy consumption.
Harvard Technology Ltd. EU - Tyler Close, Normanton, Wakefield, WF6 1RL, UK Tel: +44 (0)113 383 1000 Fax: +44 (0)113 383 1010 USA - Suite 330, 9171 Towne Centre Drive, San Diego, California, 92122 Tel: (858) 882 - 3844 www.HarvardTechnology.com
Technical specification Part number
WLD-PDT-R3-UNI-R
Mains input voltage
90 - 390 Vac RMS Nominal
Mains input frequency
50 - 60Hz
Sensors
Ambient Light & PIR
Operating temperature range
0 - 50°C
Enclosure
White PVC
Dimensions
82 Ø
Wire size
2 x 1mm²
Weight
60g
Compliance
EN 55015 & EN 60950
Wiring Diagram
MAINS LIVE NEUTRAL
BROWN BLUE
Installation Instructions Mounting hole
6464
Mounting hole
>10mm
65
Please note: PLEASE NOTE: For sheet & plastic FOR CEILING TILE metal THICKNESS OFceiling LESS tiles THAN 10mm, 2 x M3 2MOUNTING SCREWS MAY may BE REQUIRED x M3 Mounting screws be required
36mmmax max 36mm
front bezel clips
Metal Springs
82 82
If use of screws is required, the front bezel needs to be removed by releasing 2 clips hidden behind the plastic springs
Harvard Technology Ltd. EU - Tyler Close, Normanton, Wakefield, WF6 1RL, UK Tel: +44 (0)113 383 1000 Fax: +44 (0)113 383 1010 USA - Suite 330, 9171 Towne Centre Drive, San Diego, California, 92122 Tel: (858) 882 - 3844 www.HarvardTechnology.com
