Transcript
ez-Liveshow All-in-One Matrix Switcher(ez-Pro) / Manual v 1.1 Updated Aug. 2015
manual
ez-Pro : All-in-One Matrix Switcher (model:VM6) 6 HD-SDI Input / 4 HD-SDI Output Matrix Switcher
Chapter No. 1-4
ez-Pro : All-in-One Matrix Switcher / Manual
ez-Pro : Matrix Switcher Manual Revision Number: 1.0.2 Distribution Date: Dec. 2015
Copy Rights Copyright © 2006~2015 LUMANTEK Co., Ltd. All Rights Reserved This document contains information that is proprietary to LUMANTEK.CO., LTD. The information in this document is believed to be accurate and reliable; however, LUMANTEK assumes no responsibility or liability for any errors or inaccuracies that may appear in this document, nor for any infringements of patents or other rights to third parties resulting from its use. This publication may contain technical issues, inaccurate information or typos. These will be revised in revised edition, if there is any. No part of this publication is subject to be reproduced, stored in retrieval system, or transmitted in any forms, or any means without the prior consent by Lumantek. Trademarks HD ENCODULATOR TM, SD ENCODULATOR TM LUMANTEK Logo, Mega CruiserTM, ORIXTM, X-CruiserTM, DTA-PlusTM, Media BlasterTM, are Trademarks of Lumantek. Co., Ltd. Any other trademarks than stated above in this document belongs to its pertinent corporation.
Warranty Period Lumantek’s products comes with One(1) year limited warranty. Please contact below if you need more information. . LUMANTEK CUSTOMER SERVICES
[email protected] / TEL:02-6947-7400 / FAX:02-6947-7440
Chapter No. 1-4
2
ez-Pro : All-in-One Matrix Switcher / Manual
Installation Precautions This page states the safety measures the users must take to avoid circumstances where the system may occur physical damages or injuries. Please THOROUGHLY go over this page before the system installation/operation.
General Precautions -
Maintain dust FREE condition during and after System Installation/Operation. Please place the system cover in a safe location when opened. Securely stow tools and cables away from the passages. Avoid wearing loosened clothes or accessories during installation/Operation. Avoid any unnecessary actions that may damage/harm system or personnel. Do NOT open the system unless advised by Lumantek representative. Lumantek takes no responsibility on units with broken RMA seals.
Power Precautions -
Please check cable overload before connecting the system to the power supply. Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source. Avoid operating on wet floors. Make sure power extension cables, floors, and instruments are grounded and in a safe operating condition.
-
Please discharge static electricity by touching grounding metals before starting hardware installation. The grounding parts must be disassembled last. Manufacture takes no responsibilities on Direct/Indirect losses or damages due to use of inappropriate parts or services by unauthorized service provider Supplying power during the system installation may cause damages to the system and personnel.
-
AC Power Precautions -
This unit utilizes AC power, the cord comes with a grounding function. Please connect the system to the power socket with groundings. Use Green/Yellow 0.75mm2 (18AWG) or higher grade grounding cables. Do NOT block power sockets with tools or boxes. Please keep it clear at all times.
Chapter No. 1-4
ez-Pro : All-in-One Matrix Switcher / Manual
Contents 1. Introduction -------------------------------------
5
2. ez-Pro System interface -------------------------
6
2.1 System description
6
2.2 Package contents
6
2.3 HDMI multi-view interface
7
2.4 Console interface
8
2.5 Main unit interface
Chapter No. 1-4
10
ez-Pro : All-in-One Matrix Switcher / Manual
Matrix Switcher ez-Pro 6 HD-SDI Inputs / 4 HD-SDI Outputs - All-in-One Matrix Switcher
1. Introduction The Lumantek ez-Pro is one of a kind. Hybrid between Video Matrix and Switcher. Adding the key advantage from traditional Matrix/Switchers. Seamless Live switching media or cameras with 6 input and 4 output of SD/HD-SDIs. We even applied a frame sync for each input. Simple control on board Panel or remote control with console. S/W Fill & Key option brings the features you could find only in the high-end system. 10 bit processing and Analog audio
embedding or external Stereo XLR. All channel videos and audios are separately controlled. One HDMI preview channel allows user to see the display of 6 video source input plus two other background channels.
Features ① 6 HD-SDI Inputs / 4 HD-SDI Outputs (7 HD-SDI Inputs, 5 HD-SDI Outputs including extras) ② Extra 1 SDI Input for Key function ③ Extra 1 SDI Output-A for monitoring purpose ④ Support resolution - 1080i60/1080i59.94/1080i50/720p60/720p59.94/720p50/625i/525i ⑤ HDMI output resolution - 1080p60/1080p50/720p60/720p50
Chapter No. 1-4
5
ez-Pro : All-in-One Matrix Switcher / Manual
2. ez-Pro System Interface 2.1 Interface < ez-Pro Main frame – Front>
Power LED < ez-Pro main frame – Rear>
SDI Input * 1/2/3/4/5/6/7
Power GND
LAN port Console connection
SDI Out ** A/B/C/D
Audio Input (Left/Right)
HDMI port SDI-input / output monitoring
USB 2.0 for debugger/ command control
* SDI Input - Port 7 will be available ONLY when the ‘Fill/Key’ license option has been chosen. System without ‘Fill/Key’ option has total of six(6) ports. ** SDI Output - Output A has 2 ports.
2.2 Package Contents
ez-Pro main frame Console (optional)
Chapter No. 1-4
6
ez-Pro : All-in-One Matrix Switcher / Manual
2.3 HDMI Multi-View interface
SDI Output Monitoring
ez-Pro Monitoring
ez-Pro Input Monitoring
Chapter No. 1-4
Input 1
Input 2
Input 3
BAR
Input 4
Input 5
Input 6
BG
ez-Pro : All-in-One Matrix Switcher / Manual
2.4 Console Interface
A D B E C
A LCD Screen
① Display Selected Screen Effect. - Display system resolution. - Display each Input channel on A/B/C/D output.
② Display selected system resolution -Resolution support ‘1080i60/1080i59.94/1080i50/720p60/720p59.94/720p50/625i/525i’. Resolution settings is also adjustable at VM6 main unit. (Front Panel) ③ Display each input channels selected for each A/B/C/D output. Output Channel ‘A’ links to input ‘1’. Output Channel ‘B’ links to input ‘2’. Output Channel ‘C’ links to input ‘3’. Output Channel ‘D’ links to input ‘4’.
Chapter No. 1-4
F
ez-Pro : All-in-One Matrix Switcher / Manual
D B E C
B
F
Output Control
① Select Output Channel A/B/C/D or selected output channel indicator.
C
Input Control
① Select an input signal channel from -/1/2/3/4/5/6/BAR/BG” for selected output channels. Selected input channel indicator
D
‘All’ Button
① Simultaneous output of a single signal among input sources ’1/2/3/4/5/6/BAR/BG’. E
Audio
① Input channel audio / External audio indicator for a selected output channel. F
Switching Effect & Fill/Key Configuration
① Select a switching effect on selected output channel. ② If the slide bar is positioned at ‘Min’, the switching effect is ‘Cut’, fixed. ③ Turn On or Off the ‘Key’ functions for selected output channel.
* Console is directly linked to VM6 main unit via LAN CABLE. ** DO NOT USE CROSS cable for this connection.
Chapter No. 1-4
ez-Pro : All-in-One Matrix Switcher / Manual
2.4 Main Unit Interface ( front)
B
D
A
A
LCD Screen
C
① Display selected switching effect. ② Display selected resolution. ③ Display each input channels which are now broadcasting to A/B/C/D output channels. B
Output Select
① Select output channels, A/B/C/D.
C
Input Select
① Select input channels ‘-/1/2/3/4/5/6/BAR/BG’ for selected output channels.
D
Menu Select
① Push & Hold ‘SET’ button to enter ‘Menu’. ② Push & Hold ‘SET’ button to exit from the ‘Menu’.
Chapter No. 1-4
ez-Pro : All-in-One Matrix Switcher / Manual
* LCD Screen Control Scenario
Boot the ez-Pro main unit
Push & Hold
S
button
Short S button
To enter ‘Menu’
Short
S button
Short
S button
Main Display
Push & Hold S button
To exit from the ‘Menu’
Short S button
Short
S button
Short
S button
Short
S button
/
Chapter No. 1-4
ez-Pro : All-in-One Matrix Switcher / Manual
** LCD Screen Description
- Display selected switching effect. - Display selected system resolution. - Display each input channels which are now broadcasting to A/B/C/D output channels. - Input channel information indicator ‘1/2/3/4/5/6’.
- Select ez-Pro system resolution. - Resolutions of Input channels ‘1/2/3/4/5/6’ should be identical to the system supported resolutions below. “1080i60 / 1080i 59.94 / 1080i 50 / 720p 60 / 720p 59.94 / 720p 50 / 625i / 525i”. - Select [Screen switching effect] and its duration.
- Select a Background color.
- Select [Input channel audio] / [External audio] for output channels.
- Select [on/off] of Fill/Key features for output channels.
- Select ‘HDMI resolution’. - Supported resolutions: ‘1080p60/1080p50/720p60/720p50’.
- Save changes and exit ‘Menu”.
Chapter No. 1-4
eZ‐Liveshow digital video equipment
www.LUMANTEK.com/
[email protected] / +82‐2‐6947‐7422 Authorized distributor in Europe: Live Media Facilities / www.ezstudio.eu /
[email protected] +31 .20 700 9466 / +32 .3 808 5090
