Preview only show first 10 pages with watermark. For full document please download

Ez Prompter Laptop Mount Instructions

   EMBED

Share

Transcript

EZ Prompter Laptop Mount What’s Included: a. (1) EZ Prompter LCD Mount b. (1) Thumb Screw c. (1) Allen Wrench EZ Prompter Laptop Mount Instructions 1. Pick balance hole for tripod’s quick release plate based on where you think it may balance with your camera. For heavier cameras, mount towards back holes. For lighter cameras, mount towards front holes. It may take a few attempts to find the best hole to properly balance your camera. 2. Screw quick release plate into position. 3. Mount on Tripod 4. Adjust mount extensions. Height and position can be adjusted for different sized cameras. Use allen wrench provided to tighten extensions into position. 5. Remove paper tray from EZ Prompter. 6. Attach EZ Prompter to camera lens. 7. Place your laptop on laptop tray with screen pointing forward. 8. Put camera mounting screw through appropriate slot depending on camera size. 9. Mount camera to top plate by tightening screw. 10. Adjust camera position to align mirror over screen. Lens should be in the center of the screen. 11. This is how your final setup should look like. You’re now set and ready to go! Note: Laptop tray is on sliders, and will slide to the left. In this position, it is easy to operate the keyboard, and make changes anytime you want. Sliding tray locks into place when pushed to the right. Thank you very much for using BarberTech Video Products! We appreciate your business and We look forward to working with you in the future.