Transcript
P
Positive Placement
P
MODEL F250S-PP Metal Hardware Framing Nailer
Positive Placement IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customers responsibility to have all operators and service personnel read and understand this information.
TOOL SCHEMATIC AND PARTS
PARTS LEGEND Positive ▲ 1 2 3 5 *6 *7 8 *9 10 11 12 *13 *14 15 16 *17 18 19 *20 ■ *21 22 23 *24 *25 *26 27 28 29 30 31 32 33 34 35 36 *38 39 40 41 42 *43 44
*
501043 501752 501300 501017 500461 092042 500407 501001 406041 500455 401946 091208 401950 500456 500454 095432 500453 402906 092971 501061 402011 501283 092235 501002 500866 501286 501747 501333 501334 501168 500516 501591 501299 091622 501410 402669 501241 402668 097748 097746 071297 092174 401958
1 1 4 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 3 1 1
Placement F250S-PP, 500855
T.H.S.C.S. 1/4 -20 x 1/2" Air Deflector S.H.C.S. 1/4-20 x 1-1/4" Cap O-Ring O-Ring Spring, Main Valve Gasket, Cap Retaining Ring Upper Valve Piston Seal, Main Valve O-Ring O-Ring Lower Valve Piston Post O-Ring Bumper, Post B.H.S.C.S.10-32 x 5/8" O-Ring, Piston Driver Blade Seal Sleeve Sleeve, Machined O-Ring, Sleeve O-Ring Bumper Housing Plate Label, Housing-Left Label, Housing -Right End Plug, Housing B.H.S.C.S. - Special Shear Block S.H.C.S. 1/4-20x 1” Reducing Pipe Bushing O-Ring Pin, Trigger Probe Retaining Washer Spring, Valve Pin Valve Pin Roll Pin 1/8 x 1-1/8" O-Ring, Valve Body Valve Body
45 46 47 ▲48 49 50 51 52 *53 54 55 56 57 58 59 60 61 62 ▲63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 83 84 85 86 87 88 89
501039 500854 095417 009016 501006 500849 404800 500850 501409 500717 500902 500783 500847 500846 500848 501046 500513 501136 501567 500509 501028 501360 066840 404414 404325 500520 500458 501137 500899 091618 501654 500896 501388 501389 004958 501411 501412 501590 501500 501336 501480 500249 500779 404232
1 1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 4 3 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2
Sequential Trigger Assembly Nose Lockwasher 5/16 S.H.C.S. 5/16-18 x 1" Spring, W.C.E. Upper W.C.E. Washer, W.C.E. Lower W.C.E. Probe Pin Nail Cover Follower 3/16 Hex Key, Short Arm End Cap, Magazine-LF End Cap, Magazine-RT Latch Drum Pin Assembly Negator Assembly Nameplate Screw 1/4-28 x 3/4" Front Bracket Spring, Latch Shoulder Screw #8 S.H.C.S. 8-32 x 3/4" Flatwasher #8 Stop Nut Wear Strip Warning Label Logo Label Piston S.H.C.S. 1/4-20 x 1/2” Magazine w/ Wear Strips Round Nut Wire Form Quick Clear Lever Roll Pin 1/8 x 7/8” Compression Spring Spring Guide Lever Spring, Lever Shoulder Screw Fastener Usage Label O-Ring Flange S.H.C.S. 8-32 x 13/16
Denotes Normal Wear Items
**
Make sure Warning Label (Part No. 500458) is properly affixed. Replace if necessary. Label available at no charge through the Service Department.
▲ ■
Apply Loctite 242 (Blue) Part No. 093500 Apply Loctite Green Part No. 401491
➔
Denotes New Change WARNING
All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool’s operation and present a safety hazard.
Note: For optimum performance Paslode recommends the use of a 3/8” Male fitting.
3
Positive Placement
1
160 *
2
F250S-PP
73
Piston Assembly 501468
20
4
500855
21 5
6
22
7
87
8
23
46
23
24 24
46
9
88
47 48
45
Main Valve Assembly 500463
10
325 *
25 33
33
11
32
5050
34
26 26
28
89
30
7
12
49
34
30
51
51
39
74 31
13
15
33
27 27
35
28
14
52
17
52 38
38
16
17
35 18 37
29 19
45 53
42 36
40 41
51
43
Magazine and Shear Block Assembly 501676
43
65
44 44
42
59
52
Quick Clear Lever Assembly 501495
77
58 57
78 76
69 68
54
79
62
83 69
63
84
180 *
80 81
56
53 62
66
85
68 67
Shear Block Assembly 501592
32 72 75
60
71
61 64 55
Magazine Assembly 500898
70
31 86
63
*Torque Values IN/LBS
ACCESSORIES Tool Repair Kit Repairs cap air leaks, lack of power, skipping and/or sluggishness.
Part No. 219235
Trigger Valve Kit Repairs trigger valve air leaks.
Part No. 219224
Lubricants and Loctite Loctite 242 (Blue) Lubricating Oil 16 oz. Lubricating Oil with Antifreeze Chemplex 710 Lubricant 1 lb. Lubricant 5 gram tube
242 Removable
Part No. 093500 Part No. 403720 Part No. 219090 Part No. 403734 Part No. 219188
NSF
P/N: 24221
CAUTION: CAUTION: MAY MAY CAUSE CAUSE ALLERGIC ALLERGIC SKIN SKIN REACTION. REACTION. EYE EYE IRRITANT. IRRITANT. Read Read back back panel. panel.
NET NET .34 .34 FL. FL. OZ. OZ. (10 (10 ml) ml)
Degreaser Cleaner Ideal cleaner for all Paslode tools.
Part No. 219086
Large Nylon Tool Case
Part No. 219246
Safety Glasses Clear Tinted
Part No. 402510 Part No. 402512
Belt Hook Holder Attaches to work belt and carries tool using the above belt hook.
Part No. 219028
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
WEAR EYE AND HEARING PROTECTION
60
0
120
60
120
0
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
P Printed in U.S.A. © 2005, Illinois Tool Works , Inc.
An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills 60061-3105
405657-4 8/05
