Transcript
P MODEL F325C COIL NAILER
TOOL SCHEMATIC AND PARTS IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators and service personnel read and understand this information.
PARTS LEGEND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 *19 *20 21 *22 *23 24 25 26 *27 28 29 30 31 32 33 34 35 36 37 *38 39 40
501043 501016 501300 092757 501017 501001 500461 092042 500407 406041 500455 092235 500456 091208 401950 500728 501004 402011 501002 092971 501003 500659 500866 501023 091622 500746 092042 500739 501018 501006 091618 002187 501767 500660 071297 097746 401958 094295 501008 501010
1 1 4 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 3 1 1 1 1 1
F325-C, 500765
T.H.S.C.S. 1/4-20 x 1/2” Air Deflector S.H.C.S. 1/4-20 x 1-1/4” Flatwasher 1/4” Cap Gasket, Cap O-Ring O-Ring Spring Valve Retaining Ring Upper Valve Piston O-Ring Lower Valve Piston O-Ring O-Ring Lower W.C.E. Sleeve Seal, Sleeve O-Ring O-Ring Piston Driver Blade Bumper Grip Reducing Pipe Bushing End Cap O-Ring Housing Label, Housing Spring,W.C.E. S.H.C.S. 1/4 -20 x 1/2” Lock washer Washer Upper W.C.E. Roll Pin Valve Pin Valve Body O-Ring Lever, Bottom Trip Trigger
41 42 43 44 45 46 47 *48 *49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 **71 72 73 74 75 76 77 78 79 80
402669 501009 263239 402018 402084 402024 500674 402031 091541 500803 500658 500715 402668 095417 009016 500677 500700 402037 097748 402486 500675 402487 500657 091733 005562 501079 091592 500791 402662 500678 500492 501216 092174 500199 500454 095432 500453 402906 401946 501299
1 1 1 1 1 1 1 1 1 1 1 1 2 4 4 1 1 1 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
Pin, Trigger Spirol Pin Retaining Ring End Cap, Feeder Body Bumper, Feed Piston Spring, Feed Claw Piston Feed Claw Piston O-Ring O-Ring Tray Assembly Nose Feed Claw Retaining Washer Lockwasher S.H.C.S. 5/16-18 x 1” Hinge Pin Spring, Feed Claw Holdback Spring Retaining Washer Locator Pivot Pin Magazine Flexloc Thin Nut F.H.S.C.S. 1/4-20 x 5/8” Magazine Adjust. Label S.H.C.S. 1/4 x 3/4” Nameplate Debris Shield Cover, Magazine Warning Label Logo, Magazine O-Ring Spring Post O-Ring Stop Piston B.H.C.S. 10-32 x 5/8” Seal, Main Valve S.H.C.S. 1/4-20 x 1”
AIR CONSUMPTION CHART * **
Denotes normal wear items Denotes a new change NOTE: Make sure Warning Label (500492) is properly affixed. Replace if necessary. Label available at no charge through Service Department. Apply Loctite 242 (Blue) Part No. 093500 Apply Loctite 680 (Green) Part No. 219241
1 3
F325C
2
500765
24
5 26
27
6
80
28
25
7 29
30
8 9 Main 10 Valve Assembly 11 #500463
46 48
45 44
47 49
13
52 60 54
75
55
15
41
43
57 16
76
36
37
38
62
31
79 14
73
34 33 32
74 39 Trigger 40 Assembly #501048 42
35 59 53 35
53
51 50
77 68
78 20
21
63
69 66
Piston Assembly #501221
64 60
58 59
22
4 64
61 62
4 71
65
67
70 18 17 72 12 56 19
23
WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool's operation and present a safety hazard.
ACCESSORIES Sequential Operating Kit This special attachment is designed for sequential operation (stops "contact" firing). The operator must depress and hold the work contacting element against the work surface before pulling the trigger. This sequence must be repeated each time the tool drives a fastener.
Part No. 501039
Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system.
Part No. 1X0713
Lower Work Contacting Element This W.C.E. has a smooth bottom for decking, siding and sheathing applications.
Part No. 500810
Lubricants and Loctite Loctite 680 (Green) Loctite 242 (Blue) 1 oz. Chemplex 710 Lubricant 1 lb. Lubricating Oil 16 oz. Lubricating Oil 8 oz. with Antifreeze
Part No. 219241 Part No. 093500 Part No. 403734 Part No. 403720 Part No. 219090
242
Degreaser Safety Cleaner Ideal cleaner for all Paslode tools.
Part No. 219086
Belt Hook/Hanger Rafter Hook/Hanger Combination Rafter-Belt/Hanger
Part No. 219239 Part No. 219242 Part No. 501073
Safety Glasses Clear
Part No. 402510
Hex Key - 3/16” (For adjusting work contacting element.)
Part No. 500783
Large Nylon Tool Bag
Part No. 219246
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
Printed in U.S.A. © 2008, Illinois Tool Works, Inc.
0
60
120
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
60
120
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
0
WEAR EYE AND HEARING PROTECTION
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
P An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061-4503
405638-7 11/08
