Transcript
P
PowerMaster Plus™
P
MODEL F-350S Strip Nailer
PowerMaster Plus™ IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customers responsibility to have all operators and service personnel read and understand this information.
TOOL SCHEMATIC AND PARTS
PARTS LEGEND PowerMaster Plus™F-350S, 501000 ▲ 1 2 3 4 5 *6 *7 8 *9 10 11 12 *13 *14 15 16 *17 18 19 *20 ■ *21 22 23 *24 *25 *26 27 28 29 30 31 ➔ 32 33 34 35 36 37 38
*
501043 501016 501300 500249 501017 500461 092042 500407 501001 406041 500455 401946 091208 401950 500456 500454 095432 500453 402906 092971 501218 402011 501283 092235 501002 500866 501286 500779 501333 501334 501219 500516 501608 500525 091622 501010 402669 501009 501008
1 1 4 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
T.H.S.C.S. 1/4 -20 x 1/2" Air Deflector S.H.C.S. 1/4-20 x 1-1/4" O-Ring, Sleeve Cap O-Ring O-Ring Spring, Main Valve Gasket, Cap Retaining Ring Upper Valve Piston Seal, Main Valve O-Ring O-Ring Lower Valve Piston Post O-Ring Bumper, Post B.H.S.C.S.10-32 x 5/8" O-Ring, Piston Driver Blade Seal Sleeve Sleeve O-Ring, Sleeve O-Ring Bumper Housing Flange, Sleeve Label, Housing-Left Label, Housing -Right End Cap, Housing B.H.S.C.S. - Special Pin Locknut, 5/16-24 Reducing Pipe Bushing Bump Trigger Pin, Trigger Spirol Pin Lever, Bottom Trip
39 40 41 42 *43 44 45 46 47 ▲48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 ▲63 64 65 66 67 68 69 70 ** 71 72 73 74 75 76 77 78
402668 097748 097746 071297 092174 401958 501039 501156 095417 009016 501006 501363 404800 500731 002187 500717 500531 501044 501024 501025 501027 501046 500513 501481 404904 500509 501028 501026 066840 404414 404325 500520 500458 501055 501347 500729 501337 091618 501299 501479
1 1 1 3 1 1 1 1 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 1 1 1 1 1 1 2 1
Retaining Ring Spring, Valve Pin Valve Pin Roll Pin 1/8 x 1-1/8" O-Ring, Valve Body Valve Body Sequential Trigger Nose 30° Lockwasher 5/16 S.H.C.S. 5/16-18 x 1" Spring, W.C.E. Upper W.C.E. Washer, W.C.E. Lower W.C.E. Lock Washer Nail Cover Follower 3/16 Hex Key, Long Arm End Cap, Magazine-LF End Cap, Magazine-RT Latch Drum Pin Assembly Negator Assembly Nameplate Screw 1/4-28 x 5/8" Front Bracket Spring, Latch S.H.C.S. 8-32 x 2" S.H.C.S. 8-32 x 3/4" Flatwasher #8 Stop Nut Wear Strip Warning Label Logo Label Rafter Hook Assembly Blade Seal Piston S.H.C.S. 1/4-20 x 1/2” S.H.C.S. 1/4-20 x 1” Spring
Denotes Normal Wear Items
**
Make sure Warning Label (Part No. 500458) is properly affixed. Replace if necessary. Label available at no charge through the Service Department.
▲ ■
Apply Loctite 242 (Blue) Part No. 093500 Apply Loctite Green Part No. 401491
➔
Denotes New Change
WARNING All parts must be periodically inspected and replaced if worn or broken. Failure to do this can affect the tool’s operation and present a safety hazard.
Note: For optimum performance Paslode recommends the use of a 3/8” Male fitting.
PowerMaster Plus™ 160 *
50 *
F-350S
75
Piston Assembly 501519
250 *
501000
4
24
28
325 *
Main Valve Assembly 500463
50
77 74 30
160 *
53
51
76 7
52
80 *
32
Optional: Bump Trigger Assembly 501048
20 *
78
73
Magazine Assembly 500877
45
9*
160 *
62
9*
72
*Torque Values IN/LBS
ACCESSORIES Remote Fire Valve This valve via a positive air signal allows a machine mounted tool to be operated from an automatic air valve or foot pedal system.
Part No. 1X0713
Adjustable No-Mar Tip Kit Prevents you from marring wood surfaces. Kit includes an extra rubber tip. (Replacement Rubber Tip only - Part No. 501022)
Part No. 219228
Cap Hanger Bracket Attaches to the top of tool for storage or counter-balancing.
Part No. 1X0856
Tool Repair Kit Repairs cap air leaks, lack of power, skipping and/or sluggishness.
Part No. 219235
Trigger Valve Kit Repairs trigger valve air leaks.
Part No. 219224
Lubricants and Loctite Loctite 242 (Blue) Lubricating Oil 16 oz. Lubricating Oil with Antifreeze Chemplex 710 Lubricant 1 lb. Lubricant 5 gram tube
242 Removable
Part No. 093500 Part No. 403720 Part No. 219090 Part No. 403734 Part No. 219188
NSF
P/N: 24221
CAUTION: CAUTION: MAY MAY CAUSE CAUSE ALLERGIC ALLERGIC SKIN SKIN REACTION. EYE EYE IRRITANT. IRRITANT. REACTION. Read back back panel. panel. Read
NET NET .34 .34 FL. FL. OZ. OZ. (10 (10 ml) ml)
Degreaser Cleaner Ideal cleaner for all Paslode tools.
Part No. 219086
Large Nylon Tool Case
Part No. 219246
Safety Glasses Clear Tinted
Part No. 402510 Part No. 402512
SAFETY INSTRUCTIONS
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
WEAR EYE AND HEARING PROTECTION
60
0
120
60
120
0
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
Printed in U.S.A. © 2006, Illinois Tool Works, Inc.
P
An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills 60061-3105
403695-25 9/06
