Transcript
Functional Devices, Inc.
•
p: 800.888.5538
•
f: 765.883.7505
•
www.functionaldevices.com/lighting-controls
•
[email protected]
Fan & Light Controller • Description Most ceiling fans are installed at locations where only lights existed before. Consequently, there is only one wall switch and one 120 Vac line available to power your fan and light. (In some cases, there are three-way switches which have the same problem.) To turn your fan and light on independently, you have to use those cumbersome pull chains or add another wall switch and run a new wire between the switch and the fan. The Fan Light Controller gives you independent control of the fan switch in a simple “off” and “on” 3-stage sequence. The Fan Light Controller is easily installed in the decorative ceiling canopy of the fan.
• Features • Easy installation • Control fan and light independently from one wall switch • Eliminates use of pull chains • Installs easily in canopy of ceiling fan • Requires no extra wiring between switch and ceiling fan and light • Cannot be lost like a remote control unit • 120 Vac Black
White
White
}
Incoming 120 Vac controlled by wall switch
White/Black Wire to light (usually blue)
White/Red
1
White wire
FL101
Black
Wire to fan (usually black)
• Made in USA
Make no connections to green wire or to metal enclosure.
Fan and light
OFF / ON Sequence • Switch ON gives Lights Only
Anchor in Ceiling
2 FL101
3
Wires Screw
• Switch OFF, then ON gives Fan and Lights • Switch OFF, then ON gives Fan Only
Motor Body which rotates
Ceiling Canopy
Hanger Bracket Ball & Socket
FL101 Ceiling Canopy
Functional Devices, Inc. • p: 800.888.5538 • f: 765.883.7505 • www.functionaldevices.com/lighting-controls •
[email protected]
FL101
Ceiling Fan / Light Controller
Independent Control for Ceiling Fan & Light from One Existing Wall Switch
2.90˝
3.35˝
Depth = 1.00˝
1.75˝
FL101
Black
120 Vac
White
Neutral
Wht/Blk Wht/Red
FA N Made in USA Meets “Buy American” of ARRA 2009
L I G HT
Specifications Input Power: 120 Vac, 60 Hz, 3 W Contact Ratings: 360 W Light; 2 FLA, 12 LRA, 120 Vac Fan, 3 Amp Electronic Ballast Operating Temperature: 32 to 140° F Storage Temperature: -40 to 185° F Humidity Range: 5 to 95% (noncondensing)
Dimensions: Weight: Wire Length: Approvals:
3.75˝ x 1.75˝ x 1.00˝ .20 lbs. 6.50˝ UL Listed, C-UL, CSA Approved, CE
Most ceiling fans are installed at locations where only lights existed before. Consequently, there is only one wall switch and one 120 Vac line available to power your fan and light. (In some cases, there are threeway switches which have the same problem.) To turn your fan and light on independently, you have to use cumbersome pull chains or add another wall switch and run a new wire between the switch and the fan. The Fan Light Controller gives you independent control of the fan switch in a simple “off” and “on” 3-stage sequence. The Fan Light Controller is easily installed in the decorative ceiling canopy of the fan. • Requires no extra wiring between switch and ceiling fan and light • Cannot be lost like a remote control unit • 120 Vac • Made in USA
FL101
• Switch ON gives Lights Only
• Switch OFF, then ON again gives Fan Only
Black
White
White
}
Incoming 120 Vac controlled by wall switch
White/Black White/Red Wire to light (usually blue)
• Switch OFF, then ON again gives Fan and Lights
Black
1
White wire
OFF / ON Sequence
Wire to fan (usually black)
• Easy installation • Control fan and light independently from one wall switch • Eliminates use of pull chains • Installs easily in canopy of ceiling fan
Make no connections to green wire or to metal enclosure.
Fan and light Anchor in Ceiling
2 FL101
3
Wires Screw
Motor Body which rotates
Ceiling Canopy
Hanger Bracket Ball & Socket
FL101 Ceiling Canopy
