Transcript
1/7
FAP43T-W
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
FAP Strategy III Series Ceiling Loudspeaker
FAP43T-W
Features • 70.7V/100V and 8Ω Operation • Patented Safety First Mounting System Enables Installation without Drill or Screwdriver • Improved Waveguide Provides up to 110° Dispersion • Ported Enclosure Provides Enhanced Low-Frequency Response • 4-Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring and Is Convenient for Daisy Chaining Additional Strategy Series Full Range Loudspeakers or Subwoofers
• Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Include Transformer Bypass Setting for 8Ω Direct Coupled Operation • Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring/V-Rail Tile Bridge (Included) • Safety Listed to UL1480 and UL2043
General Description
Applications
The FAP43T-W’s 110° dispersion angle can reduce the number of loudspeakers necessary to achieve coverage in distributed systems with low ceilings. The loudspeaker component matches the performance of the legendary Atlas Sound FA134 driver. High quality construction 4.5" coaxial cone type driver includes a 1" voice coil and high efficiency composite cone with polymer coated cloth surround. The 20mm coaxially mounted silk dome tweeter. A high sensitivity of 90dB average means less power may be required to achieve the desired SPL.
Atlas Sound’s FAP43T-W combines superior coaxial loudspeaker performance with even dispersion and easy installation. A low profile enclosure and wide coverage make the FAP43T-W a perfect choice for low ceilings.
This loudspeaker is factory assembled in an optimally tuned and ported deep drawn enclosure and includes a specially designed 32-watt low saturation 70.7V / 100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the loudspeaker from the ceiling. This switch also includes a transformer bypass setting for 8Ω direct coupled operation.
The FAP43T-W will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system. The FAP43T-W is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.
Three years of development has produced the most innovative, easily installed, and safety-secure ceiling loudspeakers in the professional audio market. Patented Safety First Mounting System protects from over-torquing the mounting doglegs during installation and potentially cracking or breaking the mounting system. The results are NO install tools required, NO over-torqued doglegs, NO rusted screws and QUICK installation.
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasIED.com
2/7
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
System Type
Two Way, Full Range, Coaxial Ceiling Loudspeaker
Operation Mode
Non-Powered Passive
Operating Range (-10dB)
50Hz
Frequency Response (+/- 5dB)
60Hz - 20kHz (±5 dB)
Vertical Coverage
110º 800Hz - 4kHz
Horizontal Coverage
110º 800Hz - 4kHz
Max Input Ratings (8Ω)
50W Continuous, 100W Program 20 Volts RMS, 40 Volts Momentary Peak
Transformer Taps - 70V
32W, 16W, 8W, 4W and Low Impedance (8Ω)
Transformer Taps - 100V
32W, 16W, 8W
Directivity Factor (Q)
9.57 @ 2kHz
Directivity Factor (DI)
9.81 @ 2kHz
Input Sensitivity at 1W/1m
90dB
Max SPL at 1 m (Passive)
107 dB Continuous / 113 dB Peak
Recommended Signal Processing
80Hz HPF
Recommended Power Amplification
120W at 8Ω
Transducers LF Transducer Qty and Size
1 x 4.5"
LF Voice Coil Size
1"
MF Transducer Qty and Size
N/A
MF Voice Coil Size
N/A
HF Transducer Qty and Size
1 x 20mm Treated Silk Dome Tweeter
Maximum Output
107 dB Continuous / 113 dB Peak
Nominal Impedance
8Ω
Minimum Impedance
7.0Ω @ 280Hz
Crossover Frequency
3kHz
Driver Protection
N/A
Enclosure Color
White (RAL 9016)
Enclosure Material
Powder Painted CRS
Grille Material
Powder Coated CRS, White Finish (RAL9016), Paintable
Baffle Material
UL94V-0 PC
Mount Material
Zinc Plated CRS
Input Connection
4-Position PHX Type Connector
Controls
Front-Face Power Taps / Low Impedance Selector Switch
Mounting/Rigging Provisions
Patented Safety First Mounting System
Safety Features
1 Safety Hang Point
Safety Agency Ratings
UL Listed to Comply with UL1480, UL2043 and CSA60065. Suitable for Use in Air Handling Spaces per NFPA 70 and NFPA 90.
Ingress Protection
IP-21
Environmental Testing
Humidity: MIL-STD-810G / High and Low Temperature: -20° and 70° C
Cutout Diameter
8.19" (208 mm)
Logo
White Removable
Product Dimensions (HxWxD)
9.57" (243 mm) x 9.57" (243 mm) x 7.27" (184.7 mm)
Shipping Dimensions (HxWxD)
13.7" (348 mm) x 28" (711 mm) x 7.27" (184.7 mm)
Net Weight - lbs
Unit w/ C-Ring = 6.23 lbs (2.85 kg)
Shipping Weight - lbs
22.83 lbs (10.36 kg) Shipped in Pairs
2V-rails = 2.1 lbs (.95 kg)
Warranty Coverage Warranty Period
5 Years
NOTES: 1. Sensitivity: Half space, 1 meter, 2.83 volts RMS. 2. Power: All power figures are calculated using the rated nominal impedance. 3. Frequency response and sensitivity are half-space measurements.
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasIED.com
3/7
0
0
90 250 Hz 90 250 Hz
250 Hz 100
0
0
90 -24 -18 0 -12 -6 0 -24 -18 -12 -6 0 -24 -18 -12 -6 0
-90
90
-90
90 500 Hz
0 -90
-90
-90
0
90 500 Hz
0
-90 90 1000 Hz
500 Hz
0
1000 Hz
0
0
0
0
90
-90
0 -90 90 2000 Hz
0
0
90
0 -90 90 1000 Hz
0
0
90
0
-90
0
90
-90
0
0
-90 90 4000 Hz
-90 90 2000 Hz
0
2000 Hz 9063 Samples
0
0
0
-90 90 8000 Hz
0
-90 90 4000 Hz
0
-90 90 8000 Hz
0
4000 Hz
0
8000 Hz
0
Frequency Response
-90
-90
95 9063 Samples
90 100 85 95
9063 Samples
75 85 95 70 80 90 65 75 85 60 70 80
10000
20000 20000 20000
10000 10000
7000 7000 7000
5000 5000 5000
4000 4000 4000
Frequency (Hz) Octave Smoothing = 50.0% 8192 Samples, Frequency Res = 5.0 Hz
50 45
8192 Samples, Frequency Res = 5.0 Hz
Impedance vs. Frequency Response
50 40 45 35
8192 Samples, Frequency Res = 5.0 Hz
50 40 30 35 45 25 30 40 20 35 25 15 30 20 10
20000 20000 20000
10000 10000
10000
7000 7000 7000
5000 5000 5000
4000 4000 4000
3000 3000 3000
2000 2000
1000
2000
700
1000
700
500 500
Frequency (Hz)
1000
700
500
400 400 400
300
200
100
70
50
40
Frequency (Hz) 30
20
0
300
5
200
100
70
50
40
Frequency (Hz) 30
20
10 0
300
5 15
200
100
70
50
40
10 20 0
30
15 25 5 20
dB (Pascals) dB (Pascals) dB (Pascals)
3000
2000
1000
700
500
400
300
200
100
70
50
40
20
10
30
Frequency (Hz) Octave Smoothing = 50.0%
50
3000
2000
1000
700
500
400
300
200
55
100
70
50
40
20
10
30
Frequency (Hz) Octave Smoothing = 50.0%
50 60
3000
2000
1000
700
500
400
300
200
55 65
100
70
50
40
20
50 60 70
30
55 65 75 10
dB (Pascals) dB (Pascals) dB (Pascals)
80 90 100
6 dB down
360 315
6 dB down
270 360 225 315
6 dB down
180 270 360
20000
AtlasIED.com
10000
7000
5000
4000
3000
TELEPHONE: (800) 876-3333 FAX (800) 765-3435 2000
1000
700
500
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. Frequency (Hz)
400
45 135
300
90 180 270 45 135 225 0 90 180
200
135 225 315
100
amwidthBeamwidth (degrees) Beamwidth (degrees) (degrees)
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
0
0
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. Frequency (Hz)
TELEPHONE: (800) 876-3333 FAX (800) 765-3435
FAP43T PLR SAM2 072215 1W 2M
25 5
10
5 20000
10000
7000
5000
5000
7000
10000
20000
5000
7000
10000
20000
7000
7000
20000
20000
10000
5000
5000
10000
4000
2000
4000
5
3000
10
3000
2000
1000
700
500
400
300
200
100
70
50
40
30
20
dB (Pascals) 5 25
20000
10000
7000
5000
Frequency (Hz)
4000
45
4000
Frequency (Hz)
4000
90 3000
Frequency (Hz)
1000
700
500
400
300
200
100
70
Beamwidth vs. Frequency Response
4000
135
3000
360 135
3000
180
2000
Frequency (Hz) 6 dB down
2000
360
3000
1000
700
500
400
300
Frequency (Hz)
2000
30 10 1000
700
500
400
300
50
40
30
20
15
2000
15
1000
30
1000
700
500
400
20
700
500
15
400
20 0
300
0
300
180 200
100
225 0
200
100
Beamwidth (degrees) Beamwidth (degrees)
0
200
100
Directivity Index
0 20
200
100
Directivity Index
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
10 30
4/7
315
270
225
6 dB down
315 90
270 45
FAP43T PLR SAM2 072215 1W 2M
25
Directivity Index/Q vs. Frequency 50 40 30 20
10 7
50 40 30 20
10 7
5 4 3
2
1
AtlasIED.com
Q
5 4 3
2
1
Q
5/7
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
Dimensional Drawings 9.57 9.57 243.0 243.0 9.57 243.0
7.27 6.63 7.27 184.6 6.63 168.5 184.6 7.27 184.6 168.5 6.63 168.5
.55 .55 14.0 .55 14.0 14.0
7.99 7.99 203.0 203.0 7.99 203.0
7.78 7.78 197.5 197.5 7.78 197.5
22.00 558.70 20.93 531.50 2.38 60.50 26.09 662.58
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasIED.com
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
6/7
Included Accessories 9.59 243.5
8.03 204.0
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. 2.99 76.0
8.19 208.0 13.61 345.6
.28 7.1
Quick Release Tool
Grill Puller
TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasIED.com
7/7
©2015 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS005230 RevB 3/16
Architect and Engineer Specifications The loudspeaker system shall be Atlas Sound FAP43T-W. System shall include a high performance 4.5" coaxial loudspeaker, ported bass reflex enclosure and press-fit grille for conventional ceiling installation. Frequency response for the system shall be 60Hz – 20kHz. Sensitivity shall be 90dB average. Loudspeaker shall be comprised of a 4.5" coaxial cone type driver. Cone shall be constructed of composite cone with polymer coated cloth surround. The 20mm tweeter shall be a silk dome. Magnet shall be a minimum of 10oz (264g) and the voice coil diameter shall be 1" (25mm). Transformer shall be a 70.7V / 100V type with 2, 4, 8, 16, and 32 watt primary taps (@70.7V) with a front mounted tap selector switch to include transformer bypass setting for 8Ω direct coupled operation. Enclosure shall be a deep drawn steel enclosure design. Internal volume shall be 195.75 in3. To facilitate connection in conduit systems, enclosure shall be equipped with an access panel covering a recessed terminal cup. This cover shall provide a top access compression fitting / strain relief to facilitate flexible conduit up to 22mm outside diameter or 1" (25mm inside diameter) conduit when the compression fitting is removed.
Seismic support eye shall be provided on top of enclosure for additional suspension point when used in drop tile ceilings. Construction of enclosure shall be a minimum of 18-gauge deep drawn painted metal. Loudspeaker shall include Safety First Mounting System to eliminate the potential for steel screws to rust and break causing the dogleg to fail, resulting in the loudspeaker falling out of the ceiling. The system shall include a support backing plate to reinforce the ceiling material and tile support rails for use on either 2' x 4' (609mm x 1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This assembly can all be installed from beneath the ceiling tile. Overall front face diameter shall not exceed 9.57" (243mm) ; overall depth from the bottom of the ceiling shall not exceed 7.27" (184.66mm). Grilles shall be press-fit, manufactured from 24-gauge perforated steel mesh and finished in white epoxy. Round grill shall be 7.78" (197.6mm) diameter. Loudspeaker shall be safety listed to both UL1480 and UL2043 standards. The loudspeaker shall be the Atlas Sound FAP43T-W.
External wiring shall be accomplished via a removable lockable wiring connector with screw-down terminals to provide both secure wire termination and pre-wiring capability before loudspeaker installation. The 4 pole locking connector shall facilitate in/out connections and shall be located in the recessed area behind the conduit access panel.
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasIED.com
