Farm Equipment - Loyal Roth Manufacturing

Transcript

1 INFO YOU REQUESTED! Roth Mfg. Co. P.O. Box 40 Loyal, WI 54446 LOYAL FARM EQUIPMENT PRODUCT INDEX Click or tap on page numbers for product information. —B— Barn fans................................................. 28 – 33 Barn limers and parts.............................. 63 Belt lacing, conveyor............................... 44 Belting, conveyor..................................... 44 Brisket Board........................................... 6 —C— Calf hutch, poly ....................................... 14 – 27 Calf pen, poly.......................................... 7 – 13 Carts, feed............................................... 58, 59 Cart replacement parts............................ 59 Chain, elevator........................................ 34 – 43 Clean-chute funnel.................................. 46 Clean-chute tube..................................... 46 Conveyors (see elevators) Cow mattress, top wear cover................. 6 Cow mat.................................................. 1 – 5 —E— Elevators, bale......................................... 64 – 71 Elevators, double-chain........................... 34, 35 Elevators, single-chain............................ 36 – 43 Elevator accessories, single chain  Covers................................................. 40  Declines............................................... 40  Diverters............................................... 41  Downspouts......................................... 41   Electric motors and pulleys.................. 40  Extensions........................................... 41  Hoppers   Clean-chute cover............................ 41   Straight............................................. 41  Transports............................................ 40 Elevator replacement chain   Detachable....................................... 42, 43   Pintle................................................ 42, 43 —F— Fans ........................................................ 28 – 33 Feed carts................................................ 58 – 59 Feed-cart parts........................................ 59 Footbath.................................................. 60 —G— Grate, barn gutter.................................... 61 Grate scraper.......................................... 61 —H— Harrow, tine ............................................ 74, 75 —L— Limers, barn............................................ 63 Liners   Barn-cleaner chute.............................. 53, 54  Conveyor............................................. 52, 54   Dump truck.......................................... 52, 54  Gutter................................................... 53, 54  Manger................................................. 50, 54   Manure spreader................................. 52, 54   Silo chute............................................. 47 — M —  Manger liner............................................ 50 Manure spreader, compact ..................... 72, 73 Mat, cow.................................................. 1 – 5 Mat, vulcanized....................................... 2, 3 Mattress top wear cover.......................... 6 Motors, electric........................................ 40 —P— Parlor fan................................................. 33 Poly liner.................................................. 47 – 54 —S— Scraper, barn........................................... 62 Silage carts.............................................. 58, 59 Silo-chute liner......................................... 47 Silo clean-chute funnel............................ 46 Silo clean-chute tube............................... 46 Silo hopper.............................................. 45 —T— Trailer, Dump........................................... 76 —V— Vinyl-door strips....................................... 55 – 57 —W— Wall fans.................................................. 28 – 33 Call: 1-800-472-2341 Fax: 1-800-677-2341 www.loyal-roth.com E-mail:  [email protected] Specifications, prices and terms subject to change without notice. Roth Mfg. Co., Inc. is not responsible for printing errors. Copyright ©2015 by Roth Mfg. Co., Inc. All rights reserved. This catalog or parts thereof (including charts, tables and illustrations), may not be reproduced in any form without the prior written permission of the copyright owners. 030115 LOYAL Return to Index 1 1-5/16" Vulcanized Mat™ Advanced Rubber Chemistry Remains Softer... Lasts Longer 1-3/4" Rubber Pad w/Foam Insert Foam Insert Sealed From Moisture 175 lbs of Durable Softness 3/4" - 100% Rubber Mat 106 lbs. of Cushion Comfort Affordably Priced Tough top wear cover (polymer coated) Cozy Cow® Top Wear Cover For Use Over Rubber Filled Mattresses Call: 1-800-472-2341 Fax: 1-800-677-2341 www.loyal-roth.com E-mail:  [email protected] Return to Index 2 1-5/16" Vulcanized Mat™ Advanced Rubber Chemistry Remains Softer ... Lasts Longer Over Ten Years of Successful Use! Feels like I’m floating on air! Call for FREE SAMPLE 16 rubb 9 lbs. o f er c ush ion 5-Year manufacturer’s prorated replacement warranty (if properly anchored – see next page) WHAT IS VULCANIZATION? “Vulcanization” is a special chemical process invented by Charles Goodyear. It stabilizes the elastic properties of rubber, effectively making the mat into a “single, huge molecule.” Vulcanized rubber has a stable shape which cannot be reversed. It can take repeated loads and return to its original shape. Most other mats use a “bound rubber” process, which combines recycled tire rubber with various adhesives ... under pressure. Variations in the adhesive formula can dramatically affect a mat’s ability to resist long-term exposure from load pressure, moisture and chemicals. ADVANTAGES OF VULCANIZATION? Vulcanization = “single-molecule type construction.” Vulcanized mats retain their “elastic memory.” While all mats will stretch under load pressure, vulcanized mats will spring back to their original shape. Even after years of use, their softness and shape will remain the same. Single-molecule type construction = “single piece of rubber.” Vulcanized mats feature excellent flexibility, and can be handled and stacked without damage. They won’t crumble nor deteriorate from daily exposure to load pressure, moisture, chemicals, sun, or hot/cold extremes (see longer warranty above). Elastic memory = “self healing.” Sharp cuts will bounce back, becoming almost invisible. If an oversize hole is drilled for installation, the surrounding vulcanized rubber will grip the fastener, creating a seal. Nonabsorbent = no place for germs, moisture or dirt to hide. Vulcanized mats clean more thoroughly ... due to the non-porous surface. DISADVANTAGES OF VULCANIZATION? “Vulcanization” is more expensive than a “bound-rubber” process. However, vulcanized mats will remain softer, are self-healing, and are more durable. Return to Index 1-5/16" Vulcanized Mat™ 3 More Cow Comfort — Less Maintenance ➞ Nonabsorbent — easier to clean ➞ 1-5/16" Extra-thick ... for better cushioning ... much more insulation than traditional cow mats. Special air-channel design gives added softness ... quick drainage — 1-5/16" cushion comfort — features excellent protection against abrasion and udder injuries — plus surer footing — Special anti-slip surface design — provides non-porous surface — superior traction — Air-channel design on underside of mat reduces bacteria-forming moisture buildup from condensation — Cows will spend more time lying on vulcanized mat ... and eating ... for increased milk production — Saves 80% or more bedding — Easy to install — anchor on front end only — requires three TAP8100 and three F803575. Measure 3-3/4" from top and sides of mat — use 1/4" masonry bit and drill holes through mat into cement. Center third anchor between two corner anchors above (mat can be cut to size with a reciprocating portable saw, i.e., Sawzall ®). Note: No space required between mats ... you can butt them up against each other. Item No. Approx. Ship Weight VM15164865 1-5/16" Vulcanized Mat™ — 48" x 65" .................................... VM15164872 1-5/16" Vulcanized Mat™ — 48" x 72" ....................................  QUANTITY DISCOUNT      50 or more Mats 152 lbs. 169 lbs. $139.00 147.00 4.45 lbs. 1.6 lbs. 64.00 20.00 TAP8100B Anchors — 1/4" x 3" Flat Head Countersinking   Split Steel Drive ...................................................... box/100  F803575B Washers — 5/16" x 1-1/4" Stainless Fender ............. box/100  Selling Price Return to Index 1-3/4" RUBBER PAD with FOAM INSERT 4 175 lbs. of Cushion Comfort Humane Supreme Comfort Pad Two, solid-rubber pads heat-molded together; with a soft, foam insert sandwiched in between. 3-piece construction provides maximum, long-term softness and durability. Foam insert is completely sealed from moisture. Insert extends out to 4" from sides and rear, and 6" from front. Pads are absolutely non-absorbent. Will not harbor nor grow bacteria. Virtually maintenance free. SUPREME COMFORT PAD TM 5-YEAR LIMITED WARRANTY Years from Purchase 1 to 3 3 to 4 4 to 5 Cost of Replacement Comfort Pad TM Full Replacement at no Cost Replacement at 50% of Original Cost Replacement at 75% of Original Cost This warranty applies to materials only and does not include delivery nor labor. • Softer, thicker, & heavier ... more economical than most other mats • 1-3/4" thick — considerably heavier than most other mats — best insulation over cold concrete • Heavy mat clings to concrete — edges will not curl • Textured, non-skid, non-porous surface ... surer footing. Not slippery, even when wet • Cushion comfort provides cow knee, hock and udder protection — increases milk, fat and meat production — reduces veterinarian bills. Farmers have often found mats to be the solution to cow foot problems, after unsuccessfully trying foot baths and other remedies • Ideal for show cattle and old cows — many farmers find their old cows will milk longer and get up easier on mats • Easier to clean — no ribs to collect manure — reduces bacteria growth • Saves 80% or more on bedding — reduces time and effort spent producing, storing and spreading bedding — cow mats will quickly pay for themselves • Easy to install — only 2-anchors required (2" from top and 4" from sides). Brisket-board compatible.   Allow 1/2" spacing between mats for summer expansion.    Note: Mats can be trimmed up to 2" on each side, front and rear. Aprox. Selling Item No. Description Ship Weight Price MAA7600-475715 MAA7700-475655  QUANTITY DISCOUNT  1-3/4" Supreme Comfort PadTM – 47-1/2" X 71-1/2".......... 175 lbs. 1-3/4" Supreme Comfort PadTM – 47-1/2" X 65-1/2".......... 160 lbs. Custom sizing - factory can cut above mats down to desired size      50 or more mats $150.00 150.00 TAP8100B Anchors — 1/4" x 3" Flat Head Countersinking Split Steel Drive....................................................... box/100 F803575B Washers — 5/16" x 1-1/4" Stainless Fender............. box/100 4.45 lbs. 1.6 lbs. 64.00 20.00 Return to Index 5 3/4"-100% RUBBER MAT 106 lbs. of Cushion Comfort HUMANE COW MATS Humane mats are manufactured in Wisconsin from recycled tire material. Humane removes all objectionable material including wire and fibers. Ground rubber is combined with specially formulated adhesive and vulcanized at high pressure for rugged dependability. No filler materials are added. Mats are absolutely nonabsorbent and will not harbor or promote growth of bacteria. Humane mats are virtually maintenance free. 12-YEAR LIMITED WARRANTY Humane cow mats are covered under a 12-year limited warranty. These mats are unconditionally guaranteed by the manufacturer for three (3) years. Should a mat fail within this period, the manufacturer will replace it free of charge. For failure during the balance of warranty period, the manufacturer provides a prorated guarantee, based on prices current at time of replacement. This warranty applies to materials only and does not include delivery or labor. • Humane 100% Rubber Cow Mats are thicker, heavier, better designed and more economical than most other mats • 3/4" thick — considerably heavier than most other mats — best insulation over cold concrete • Flat on both sides — heavy mat clings to concrete — edges do not curl up • Textured, non-skid, non-porous surface ... surer footing than smooth-surface mats. Not slippery, even when wet • Greater resiliency than more expensive hard mats • Cushion comfort provides cow knee, hock and udder protection — increases milk, fat and meat production — reduces veterinarian bills. Farmers have often found mats to be the solution to cow foot problems, after unsuccessfully trying foot baths and other remedies • Ideal for show cattle and old cows — many farmers find their old cows will milk longer and get up easier on mats • Easier to clean — no ribs to collect manure — reduces bacteria growth • Saves 80% or more on bedding — reduces time and effort spent producing, storing and spreading bedding — cow mats will quickly pay for themselves • Easy to install — for new free and tie stall barns, mats can be cemented in place. For existing barns, mats can be anchored on top of cement. Mats can be cut to size Selling Item No. Price MAA8200 3/4" Rubber Mat (approximately 48" x 72")...................... 106 lbs.  $50.00 TAP8204B Nail Anchor - 1/4" x 2" (nylon body, zinc-plated nail)....... box/100  25.00 QUANTITY DISCOUNT 25 or more Mats Installation Instructions Nylon anchor Gutter (Side view) ANCHORING MATS TO EXISTING CONCRETE — For existing barns, anchor mats on top of concrete (make sure platform is clean and smooth). Position bottom end of mat close to gutter edge for extra protection of cow’s udders. Lag mat across front end using 3-mat anchors (so mat can be picked up for cleaning, if ever required). Measure 4" from top and side of mat and mark off holes. Use 1/4" masonry bit and drill holes through mat into cement. Drill holes 1/4" deeper than anchor, since dust tends to go back into holes. Insert nylon anchor body in hole and tap gently until head of anchor body is set tightly against mat (dip anchor body in liquid soap first to make job easier). With several sharp hammer blows, drive nail into nylon anchor body to expand. CEMENTING MATS IN NEW CONCRETE — For new free and tie stall barns, mats can be cemented into new concrete. Slope platform 3" to 5". Position bottom end of mat close to gutter edge for extra protection of cow’s udders. Provide a 4" border along top end of mat and 8" between mats. The bond between mat and fresh concrete may soon break, but concrete border surrounding each mat will hold it in place. Pour platform to elevation 3/4" below final height and level. Allow one hour for initial set, then install mats. Do not push mat into concrete as this will result in a much harder surface. Pour border around mat and trowel flush with mat surface. Lag mat across bottom end using 3-mat anchors (refer to anchoring instructions in preceding paragraph). CUTTING MATS FOR A CUSTOM FIT — Mats can be cut with a sharp linoleum knife. Dip knife often into cold (not hot) water for extra lubrication. If you have to notch out for posts, make cuts as close as possible to diameter of pipe. Some installers use a maul and a short length of pipe with a sharpened end to punch out holes for posts. For faster cutting, use a reciprocating portable saw, i.e., Sawzall.® Return to Index COZY COW® Top Wear Cover 6 For Use Over Rubber Filled Mattresses ✦ Heavy-duty ✦ Nonwoven (high-strength) ✦ Water-repellent — polymer coated (consistent thickness). UV stabilized to resist sunlight — more UV blocking pigment used (provides greater protection in free-stall applications) Item No. Description Tough top wear cover (polymer coated) Unit of Measure Approx. Selling Ship Wt. Price COZY COW® — Continuous Non-Woven Top Cover   CM-CP7080__ Polymer-Coated Continuous Non-Woven Top Cover –   heavy-duty x 80" L (roll = approx. 328')............................................................ per ft 1.8 lbs. $  18.50   CUT-CM Custom Cutting Charge (one-cut per order — no charge).......... each 28.00 COZY COW® — Pocket Top Cover (use for tie-stalls or stanchions)   CM-PP7054 Pocket Non-Woven Top Cover –   heavy-duty x 54" wide with 10" pocket .................................... each 11 lbs. 71.00 COZY COW® — Hardware   PH-CM2 Poly, Fabric Holddown — 1/4” x 2” x 12’ (flat, white) .................. each 2.5 lbs. 9.95   TAP8204B * Anchors — 1/4" x 2" nylon body – zinc plated nail........... box of 100   TAP9204B ** Anchors — 1/4" x 3" nylon body – zinc plated nail........... box of 100 1.2 lbs. 1.7 lbs. 25.00 35.00   TAP6999B * Anchors — 1/4" x 1-1/2" steel perma-grip anchor............ box of 100   TAP5999B * Anchors — 1/4" x 2" steel perma-grip anchor.................. box of 100   F324030B *** Sheet-Metal Screws —   size 14 x 1-1/4" x 1-1/4", stainless................................ box of 100 * =  to anchor fabric holddowns to concrete floor ** =  to anchor frame boards to concrete floor *** =  to secure fabric holddowns to frame boards 1.2 lbs. 2.0 lbs. 39.95 42.95 1.6 lbs. 30.00 Poly Brisket Board      The perfect accessory      for your cow’s stall ✦ Smooth, rounded surface — protects dew claws — permits natural leg extension 1/4" thick super-tough poly ✦ Won’t splinter like wood ✦ Less expensive than poured cement brisket boards ✦ Special joint design — extruded tongue provides solid support... allows ends to butt together vs. overlap, for a tighter fit 5-1/2" 5-1/4" 8´ ✦ Simple to install... with 13-anchors on each side (use TAP6999B Steel Perma-Grip Anchors — 1/4 x 1-1/2") Item No. Description   BB-8 3-1/2" 1" Unit of Measure Poly, Brisket Board, .......................................................................... each 1/8"-1/4" Thick x 5-1/2"H x 9-3/4"W x 8'L (black) 7-3/4" Approx. Ship Wt. Selling Price 14 lbs. 38.00 Return to Index #1 in Calf Comfort LOYAL 7 The Leader In Calf-Raising Systems Poly-Back Pen Wire-Back Pen EXL Calf Hutch Group Hutch Rolling Group-Feeding Pen SL Calf Hutch Standard Transition-Pen EXL Transition-Pen Call: 1-800-472-2341 • E-mail: [email protected] • www.loyal-roth.com Return to Index 8 Poly Calf-Pen Systems 3-Systems to Choose From 10-Year Manufacturer’s Limited Warranty System 1 Pen with Poly-Back Panel 8 QT. 8 QT. Lock vents in closed position (if pens installed back to back) (back view) Barn Wall System 2 Pen with Back Wall-Mount Channels Back Wall-Mount Channel (No. AG1-3013A) System 3 Pen with Wire-Back Panel (back view) Return to Index POLY CALF-PEN SYSTEMS 9 Free-Standing... No Posts to Anchor Knockdown Completely... For Skid-Steer Cleaning • Unique, interlocking, tongue-in-grove design • Interlock side-to-side and back-to-back • Assemble a system to fit your exact needs • Easy to set-up, clean & store... by one person • Free-standing & wallmount models  More Features  Patent Pending Built-in calf dividers isolate calves ... reduce spread of disease (included with each side panel) Built-in pail divider - helps keep feed dry, water clean Larger, 8-qt., white pails (included)... outside access for faster feeding Special, knock-down design... no floor anchors to buy/install Quickly remove pens... for faster cleaning with skid steer Special, honey-comb design — for better, calf monitoring... improved air flow 10-Year Manufacturer’s Limited Warranty Lock vents in closed position (if pens installed back to back) (rear view) Hinged-door — ­ adjusts up & down 5"... allows calf to easily feed from pails... as calf and bedding pack grow Calf-proof latch — door opens for quick access... easier cleaning Pails firmly supported by molded-in holders... plus removable rings (included) NEW... Stronger, steel-reinforced door frame, unlike others that sag •3" thick, high-impact, virgin-poly panels... roto-molded as one, solid part for greater strength... no thermo-formed, black seam lines which may split or crack • Ribbed construction adds even more strength • Smooth surface will not harbor nor promote bacterial growth • Easier to sanitize... impervious to acids • Pewter color hides dirt... 100% opaque Most advanced ventilation system on the market • Oversize, adjustable, rear vents • Full front-to-back air flow Indoor pens can utilize wasted space in corners & alleys ... or line up pens side-to-side & back-to-back, to raise more calves in less space — with less walking Return to Index Poly Calf-Pen Systems 10 Simpler, Drop-In, Assembly Design... Lowest Parts-Per-Pen on Market Faster, Easier Set-Up and Knock Down Front-Panel slips into side-panel... Only two, short, 6" pins per pen Adjusts up & down 5". Allows calf to easily feed from pails as calf & bedding pack grow Height-Adjustment Holes 2) Insert pin 1) Slip front panel-post into side panel 3) Temporary, pin storage Share a Side Door (open position) Return to Index Poly Calf-Pen Systems 11 Poly-Back System Side-Panel slips onto poly back-panel... no pins nor tools required Side-panel Back-panel Side Connected to Back Share a Back Share Backs and Sides Wire-Back System Wire-Back slips onto side-panel... no pins nor tools required Return to Index Poly Calf-Pen Systems 12 Buy Panels to Fit Your Space Share Side and Back Panels House Calves Up to 8-10 Weeks Old Dimensions (approx) 3" Pail 54.5" 48" Pail 51.125" 47.75" (No. AG1-3004 & AG1-3004WB) 59.75" (No. AG1-3005 & AG1-3005WB) 71.75" (No. AG1-3006 & AG1-3006WB) 83.75" (No. AG1-3007 & AG1-3007WB) Note: All panels 43" high 3" (top view) 61.75" 73.75" 85.75" 97.75" 65" 77" 89" 101" 45" 3" 3" (No. AG1-3004 & AG1-3004WB) (No. AG1-3005 & AG1-3005WB) (No. AG1-3006 & AG1-3006WB) (No. AG1-3007 & AG1-3007WB) (No. AG1-3004) (No. AG1-3005) (No. AG1-3006) (No. AG1-3007) Bottle & Nipple – 2 or 3-quart (No. DSA2) (No. DSA3) Bottle Holder (No. AG1-3012) Rotate tabs for quick release Item No. Description Accessories AG1-3012 DSA2 DSA3 AG1-3025 AG1-3020 AG-1049N Head Lock (No. AG1-3020) Unit of Measure Bottle Holder (holds 2-qt. or 3-qt. bottles)........................ each Bottle with Nipple, 2-qt..................................................... each Bottle with Nipple, 3-qt..................................................... each Hay Feeder....................................................................... each Head Lock........................................................................ each Replacement Pail, 8-qt., white, 10.25" top outside dia..... each Hay Feeder (No. AG1-3025) Approx. Wt. Selling Price 1 lb. $14.50 1 lb. 8.00 1 lb. 9.00 7 lbs. 39.35 5 lbs. 31.95 2 lbs. 11.50 Return to Index Poly Calf-Pen Systems Front panel (No. AG1-3003A) Back wall-mount channel (No. AG1-3013A) Item No. Description Back panel Side panel (No. AG1-3002A) (No. AG1-3004, AG1-3005, AG1-3006 AG1-3007, AG1-3004WB, AG1-3005WB, AG1-3006WB & AG1-3007WB) Wire-back panel (No. AG1-3048WB) Bedding stopper (No. AG1-3013) COMPETITIVE PRICING! Unit of Measure AG1-3003A Front Panel, 48" Overall Length x 43" H.......................... each   (includes 2-8 qt. pails; 2-pail holders; and hardware) 13 Wire-back panel illustrated with optional Bedding stopper Approx. Wt. Selling Price 32 lbs. $147.00 Poly-Back & Wall-Mount Systems   Side Panel (includes a built-in calf divider and required hardware) AG1-3004    61" L x 43" H Side (fits poly-back & wall mount)....... each 25 lbs. AG1-3005    73" L x 43" H Side (fits poly-back & wall mount)....... each 32 lbs. AG1-3006    85" L x 43" H Side (fits poly-back & wall mount)....... each 39 lbs. AG1-3007    97" L x 43" H Side (fits poly-back & wall mount)....... each 46 lbs. 128.00 138.00 145.00 162.00 AG1-3002A   Poly-Back Panel, 48" Overall Length x 43" H .............. each   (includes 2-rotary vents and required hardware)    Note: If pens installed back-to-back, also order    accessories item no. AG1-3002A-HDWE below. AG1-3002A-HDWE   Hardware Bag (for back-to-back installations only -.............   not required for single-row installations). Order 1 per    each back panel. AG1-3013A   Back Wall-Mount Channel, Galvanized, 32" L.............. each   (order if back panel not used) 20 lbs. 89.00 1 lb. 7.20 9 lbs. 21.60 Wire-Back System   Side Panel (includes a built-in calf divider and required hardware) AG1-3004WB    61" L x 43" H Side (fits wire back)............................ each 25 lbs. AG1-3005WB    73" L x 43" H Side (fits wire back) ........................... each 32 lbs. AG1-3006WB    85" L x 43" H Side (fits wire back) ........................... each 39 lbs. AG1-3007WB    97" L x 43" H Side (fits wire back)............................ each 46 lbs. AG1-3048WB 10 lbs.   Wire-Back Panel, 48" L x 43" H.................................... each AG-3013 2 lbs.   Bedding Stopper (for wire back)................................... each  QUANTITY DISCOUNT  15 to 44 Pens 45 or more Pens 132.00 143.00 150.00 166.00 31.40 22.30 Return to Index 14 Poly Deluxe EXL Hutch™ Wider — Longer — Taller — Heavier! For Healthier, Faster Growing, More Comfortable Calves Special Vent System #1 in Calf Comfort Advanced Design Snow-white-poly reflects sun’s heat. Completely opaque – stops sun’s heat & UV rays from entering the hutch. Brighter interior. 10-Year Manufacturer’s Limited Warranty What Makes the Deluxe EXL Hutch™ Better? ◆ Roomiest interior of any single-calf hutch on the market (overall dimensions: 62"W x 98"L x 55"H): — More distance between calf and heat-drawing walls ... helps maintain the critical “comfort zone” (50 to 55°F) immediately surrounding calf — Better protection from wind, rain and snow ... rear of hutch stays warmer on cold days — Usable for longer growth periods (extra-tall 36" high entry door) — Wider hutch provides extra stability SPECIFICATIONS ◆ Heaviest, single-calf hutch you can buy (approx. 138 lbs.): — Resists movement from wind gusts or larger calves Material: Thicker-walled, virgin poly (no need for steel-frame — No hard-to-clean steel-tube frame around bottom around bottom) required (avoids problems of manure hang-up or Overall size: 62"W x 98"L x 55"H frame damage from skid steer) Weight (approx): 138 lbs ◆ Longer, ten-year manufacturer’s limited warranty ◆ More “standard” features... including left or right-side feed doors; inside manger with built-in, double-pail holder and splash guard; two 8-qt. pails; two built-in bottle holders; top vent; 2-rear vents; and new, industry-exclusive, 3–In–One, swing-up, vented-rear feed & bed door Don’t make the mistake of buying a smaller, lightweight hutch, with fewer features; when you can have a Poly Deluxe EXL Hutch™ for about the same investment! ◆ Return to Index NEW... Industry-exclusive, 3–In–One, Swing-up, Rear Door. Vent... Bed... Feed... all from one door at rear of hutch. 15 • Door swings out of way (can be left open) • Sliding-grill-vent... adjust from fully-closed to wide-open • Easier access... with ATV or truck • Feed calves faster • No handles... snaps shut Most advanced ventilation system on the market • Full front-to-back air flow for maximum cooling relief • Oversize vent openings • Smooth-surface walls, plus wider ribs with gradually rounded corners, eliminate dead spots • Reduces pneumonia and vet bills (Rear-view) Open NEW... Bottom Vents (Rear-view) Closed NEW... Bottom Vents NEW... superior ventilation design... for maximum air-flow Top-vent EXPOSED VIEW Top-vent OPENS AND CLOSES Rear sliding-grill-vent Rear sliding-grill-vent OPEN POSITION CLOSED POSITION OPTIMAL INSIDE TEMPERATURE & LIGHTING T EA H ◆ Snow-white-poly reflects sun’s heat. Completely opaque – stops sun’s heat & UV rays from entering the hutch. Brighter interior... calves eat more... and grow faster. ◆ Avoids heat buildup and the big temperature swings common in translucent units — UV blocking pigment eliminates the greenhouse effect ◆ Maintains optimal natural temperature... plus a lighter, healthier interior ◆ Doesn’t need to be located in the shade SUN HT G LI VIRTUALLY INDESTRUCTIBLE ◆ High-impact, UV stabilized, high-density, virgin poly ◆ Solid, 1-piece, molded design (using state-of-the-art technology) — easier to sanitize, stack and transport ◆ Ribbed construction, plus arched roof, adds even more rigidity... better wind resistance ◆ Impervious to manure acids and disinfectants ◆ Excellent resistance to cracking, punctures & warping... no rough edges ◆ Extremely tough — resists damage from sun, heat & frost (won’t freeze to ground) ◆ Outperforms and outlasts wood and fiberglass hutches — lowest true cost Return to Index 16 EASY TO STACK MORE HYGIENIC — EASIER TO SANITIZE ◆ Nonabsorbent — won’t harbor nor promote bacterial growth (unlike wood)... reduces diarrhea ◆ Seamless — no cracks for wastes to settle in nor weather to creep through ◆ Easier to sanitize — dirt quickly washes off ◆ Easily stacked on sides or ends for compact storage ◆ Maximum stack quantity = 10 units (remove all parts, except top vent, prior to stacking) CHOICE OF LEFT OR RIGHT FEED DOOR Left Feed Door ◆ Group hutches side-by-side for faster feeding ◆ Alternate right-or-left-side doors to reduce walking between hutches by 50% ◆ Side door is larger for easier access — wind won’t blow open-door closed ◆ Sturdier, non-binding hinge pin — solid aluminum (3/8" dia. x 26-1/2"L) POLY MANGER WITH “WHITE” PAILS ◆ Pail stopper - keeps pails in ◆ Manger bolts to right or left inside wall (under feed door) ◆ Designed with built-in, double-pail holder ◆ Two 8-qt., rugged poly pails included ◆ White vs. black pails offered — calf starter usage will begin in 1-2 days vs. 4 days for black pails ◆ Inside manger location protects feed... allows calves to continue eating, regardless of outside weather ◆ Manger positioned to keep sleeping area clean and dry Splash Guard molded into manger — helps keep feed dry, water clean Right Feed Door TWO BUILT-IN BOTTLE HOLDERS ◆ Front and rear bottle holder ◆ Included at no extra cost ◆ Located for easy access ◆ Predrilled 1-5/16" hole (for nipple to slide through), in holder opposite feed manger... to help keep feed dry Return to Index 17 ACCESSORIES NECK STRAP with CHAIN, 72.5" TETHER PIPE & ROOF EYE-BOLTS ◆ Preferred vs. fence: Chain — Easier access for cleaning — Avoids snow drifts created by fences — More contact with calves... easier to train show animals and heifers — Lower cost... faster to set up, move & store ◆ Sturdy chain (4'L with 3/16" thick links) glides along length of galvanized pipe (1-1/4" dia. x 14 ga.). Pipe is mounted under center ridge of roof, using a 3/8" x 2-1/2" eyebolt (furnished), on each end. Eye-bolts can also be used for lifting hutch.  ◆ Chain movement is usually restricted to inside of hutch the first day (to allow calf to adapt to restraint system), or when weather is cold. Insert clevis pin (furnished), through a hole in pipe at center of hutch. Simply remove pin and reinsert in pipe hole nearest door, to allow calf to walk outside. BOTTLE HAY FEEDER with DOOR STORM DOOR  2 or 3-quart, poly bottle with soft rubber nipple BEDDING DOOR  ◆ For very cold/windy climates ◆ Sturdy, poly construction ◆ Quickly installed or removed Sturdy, poly construction. Bolts to inside side wall of hutch toward rear — includes side door & latch, plus 3/8" dia. solid aluminum hinge pin (access opening will need to be cut in side wall) FENCE ATTACHMENT HARDWARE HANGING FENCE FEEDER Extra, side door for adding bedding. Usually installed toward rear of hutch. Includes side door & latch, plus 3/8" dia. solid aluminum hinge pin (access opening will need to be cut in side wall) Includes two rods (1/2" galv. tube) plus four eyebolts (3/8" x 2-1/2" and 1-1/2") with nuts and washers ◆ Adjustable, poly-gate controls feed-flow rate ◆ Holds 3-day supply of calf feed ◆ Hinged cover ◆ Poly construction (No. AGRI-1132) Note: ‘Right’ & ‘Left’ identification based on standing at front of hutch, looking toward rear. Model No. Approx. Item Weight EXL__ Poly Deluxe EXL Hutch with inside manger with built-in double-pail holder & splash guard, two 8-qt. white pails, vented-rear feed & bed door, 2-rear vents, top vent, and side feed door (specify location - right or left) . 138 lbs.  QUANTITY DISCOUNT  10 to 49 Hutches 50 or more Hutches H-A1 Neck Strap, Chain, 72.5" Tether Pipe & Eye-Bolts ..................................... 8 lbs. DSA2 Bottle with Nipple, 2-qt.  .............................................................................. 1 lb. DSA3 Bottle with Nipple, 3-qt.  .............................................................................. 1 lb. DLA4 Hay Feeder with Side Door ......................................................................... 7 lbs. DLA5 Bedding Side Door ...................................................................................... 3 lbs. H-A4 Fence Attachment Hardware ...................................................................... 3 lbs. H-A7 Storm Door.................................................................................................. 6 lbs. H-A9 Front Enclosure with PVC tubes and bungie straps.................................... 6 lbs. AGRI-1132 Hanging Fence Feeder................................................................................ 2 lbs. AG-1049N Replacement Pail, 8-qt., white, 11" top outside dia. (fits current model)..... 2 lbs. Pail, 6.5-qt., white, 9.25" top outside dia. (replaces prior-model 6.5 qt. pail)... 2 lbs. AG-1019 Selling Price $385.00 29.60 8.00 9.00 36.85 29.05 15.50 29.00 25.15 64.00 11.50 9.95 Return to Index 18 POLY DELUXE SL HUTCH™ Advanced Design — More Standard Features CHOICE OF RIGHT OR LEFT FEED DOOR Snow-white-poly reflects sun’s heat. Completely opaque – stops sun’s heat & UV rays from entering the hutch. Brighter interior. “Stay-Open Door" –    locks into place   when opened Optional Bottle Holder – bolts to right or left side wall (Rear-view) Open NEW... Bottom Vents 10-Year manufacturer’s limited warranty 35" High Entry Door – offset to protect calf & manger (can be cut full size for warmer climates) Standard–Size Model THE ONLY MANGER WITH SPLASH GUARD • Pail stopper - keeps pails in • Splash guard helps keep feed dry... water clean • Manger bolts to inside wall, directly under feed door (for side or rear feeding) • Designed with built-in-pail holder (two, large pails included) EXCLUSIVE, 3–IN–ONE, SWING-UP, REAR DOOR. VENT... BED... FEED • Easier access... with ATV or truck • Feed calves faster • Door swings out of way (can be left open) • No handles... snaps shut • Contains sliding vent NEW... superior ventilation design... for maximum air-flow Top-vent EXPOSED VIEW Top-vent OPENS AND CLOSES MORE STANDARD FEATURES • Double-pail manger with splash guard • Two, 8-qt. pails • Feed door - specify right or left • Roof vent (oversize) • Rear vent (oversize) • Two, rear vents • One, swing-up, vented-rear feed & bed door Rear sliding-grill-vent OPEN POSITION Rear sliding-grill-vent CLOSED POSITION SPECIFICATIONS Material: Thicker-walled, virgin poly (no need for steel-frame around bottom) Overall size: 47.5"W x 84.5"L x 53.5"H Weight (approx): 90 lbs Return to Index 19 ACCESSORIES NECK STRAP with CHAIN, 58" TETHER PIPE & ROOF EYE-BOLTS ◆ Preferred vs. fence: Chain — Easier access for cleaning — Avoids snow drifts created by fences — More contact with calves... easier to train show animals and heifers — Lower cost... faster to set up, move & store ◆ Sturdy chain (4'L with 3/16" thick links) glides along length of galvanized pipe (1-1/4" dia. x 14 ga.). Pipe is mounted under center ridge of roof, using a 3/8" x 2-1/2" eyebolt (furnished), on each end. Eye-bolts can also be used for lifting hutch. ◆ Chain movement is usually restricted to inside of hutch the first day (to allow calf to adapt to restraint system), or when weather is cold. Insert clevis pin (furnished), through a hole in pipe at center of hutch. Simply remove pin and reinsert in pipe hole nearest door, to allow calf to walk outside. BOTTLE BOTTLE HOLDER HAY FEEDER with DOOR  2 or 3-quart, poly bottle with soft rubber nipple BEDDING DOOR FRONT ENCLOSURE ◆ Keeps calves in hutch ◆ Permits front feeding ◆ Includes: 2-PVC tubes (1-1/4" OD dia.) 2-bungie straps Sturdy, poly construction. Bolts to inside side wall of hutch toward rear — includes side door & latch, plus 3/8" dia. solid aluminum hinge pin (access opening will need to be cut in side wall) FENCE ATTACHMENT HARDWARE Extra, side door for adding bedding. Usually installed toward rear of hutch. Includes side door & latch, plus 3/8" dia. solid aluminum hinge pin (access opening will need to be cut in side wall) STORM DOOR ◆ ◆ ◆ ◆ ◆ For very cold/windy climates Protects calves Eliminates shoveling snow out of hutch Sturdy, poly construction Quickly installed or removed Includes two rods (1/2" galv. tube) plus four eyebolts (3/8" x 2-1/2" and 1-1/2") with nuts and washers Note: ‘Right’ & ‘Left’ identification based on standing at front of hutch, looking toward rear. Model No. Approx. Item Weight SL__ Poly Deluxe SL Hutch with inside manger with built-in double-pail holder & splash guard, two 8-qt. white pails, vented-rear feed & bed door, 2-rear vents, top vent, and side feed door (specify location - right or left) .  QUANTITY DISCOUNT 10 to 49 Hutches 50 or more Hutches DSA1 Neck Strap, Chain, 58" Tether Pipe & Eye-Bolts ........................................ DSA2 Bottle with Nipple, 2-qt.  .............................................................................. DSA3 Bottle with Nipple, 3-qt.  .............................................................................. AG-2002 Bottle Holder............................................................................................... DSA4 Hay Feeder with Side Door ........................................................................ DSA5 Bedding Side Door ..................................................................................... H-A4 Fence Attachment Hardware ...................................................................... DSA6 Front Enclosure with PVC tubes & bungie straps....................................... DSA7 Storm Door.................................................................................................. AG-1049N Replacement Pail, 8-qt., white, 11" top outside dia. (fits current model)..... AG-1019 Pail, 6.5-qt., white, 9.25" top outside dia. (replaces prior model 6.5-qt. pail). Selling Price 90 lbs. $309.00 8 lbs. 1 lb. 1 lb. 1 lb. 7 lbs. 3 lbs. 3 lbs. 5 lbs. 6 lbs. 2 lbs. 2 lbs. 29.60 8.00 9.00 15.00 38.85 29.05 15.50 24.80 29.00 11.50 9.95 Return to Index 20 POLY GROUP HUTCH™ Longer, Taller, Heavier! Holds 4 to 6 Weaned Calves. Group Hutches™ avoid the setbacks in weight and health that often occur from direct transfer to a large herd Snow-white-poly reflects sun’s heat. Completely opaque – stops sun’s heat & UV rays from entering the hutch. Brighter interior. (Front-view) 10-year manufacturer’s limited warranty NEW Superior ventilation design ... larger front vent and rear, rotary-top-vent; plus exclusive, sliding-grill-vents in rear doors for maximum ventilation Largest, one-piece-molded group hutch you can buy ... Size: 106"W x 89"L x 79"H Weight: 250 lbs. Entire group hutch and poly-skid-frame molded together in one piece ... no rivets to break loose nor pull apart Easier access to food and water... for less stress ... faster growth Thick walled ... not thin nor flimsy like some other brands Opaque, virgin poly with UV blocker prevents major temperature swings (Rear-view) NEW ... industry-exclusive, swing-up, bedding doors ... for easier bedding thru rear of group hutch Return to Index POLY GROUP HUTCH ™ 21 NEW ... industry-exclusive, swing-up, bedding doors ... for easier bedding thru rear of group hutch Easy-open doors are geared together ... lift one door and the second opens automatically Rear, rotary-top-vent Rugged gear design NEW ... superior ventilation design ... larger front vent and rear, rotary-top-vent; plus exclusive, sliding-grill-vents in rear doors for maximum ventilation (Rear-view) (Patent Pending) Transitional housing – after isolation but before transfer to a larger group Steel pen shown for illustrative purposes only ... not included with group hutch (Front-view) Return to Index 22 HOW GROUP HUTCHES™ WORK ◆ Group Hutches™ serve as a transitional “half-way house” ... after living in a single-calf hutch ... but before adjusting to a large group ◆ Weaned calves transferred from isolation to a Group Hutch™ can gradually adjust to similar-sized calves (and will actually bond for protection) ... before transfer to a large group ◆ Calves can be moved earlier from isolation to a Group Hutch,™ due to less competition for food ... and less social stress ... than found in a large herd ◆ Group Hutches™ avoid the setback in weight and health that often occurs from direct transfer to a large herd ... by delaying the added competition for food ... the increased nose-to-nose contact ... and the higher social stress ◆ Group Hutches™ provide the highest daily weight gain when its most important ... during a calf’s early months ◆ Each calf’s health can be monitored more easily in a Group Hutch™ vs. a large group WHEN TO TRANSFER CALVES TO A GROUP HUTCH™ ◆ Transfer calves as soon as weaned ◆ Wean based on grain intake vs. age (less than 45 days on average) ◆ Wean calves as soon as they are consuming 2.1 lbs. of grain per day for three days ◆ Transfer similar-sized calves to the same Group Hutch™ ... to minimize social stress and reduce competition for food GROUP HUTCHES™ CAN REDUCE INVESTMENT PER CALF BY UP TO 50% ◆ Fewer single-calf hutches are required, as calves can be transferred earlier to Group Hutches™ — so emptied single-calf hutches are available sooner ◆ The investment in a Group Hutch™ is spread out over groups of calves vs. single calves ◆ Feeding and cleaning time per calf is less with a Group Hutch™ vs. with single-calf hutches ◆ Faster weight gains and fewer health problems are found with Group Hutches™ vs. direct transfer from isolation to larger groups Return to Index 23 GROUP HUTCH™ OPERATION TIPS ◆ Position front of hutch toward warmer, southerly winds ◆ Locate hutches on either: — gravel or sand base with good drainage — pasture with good drainage ◆ Locate water and feed a minimum of 24' straight out from front of hutch ◆ Allow approximately 50 square feet of pen space per calf when computing length of pen ◆ Use 16' cattle panels as needed for the computed length of pen ◆ Place similar-sized calves in each group hutch ... for maximum weight gain ◆ Feed calves twice per day — changing from grain to forage ◆ Calves can remain in Group Hutch™ up to 500 lbs. (approximately 5 to 6 months old) ◆ Sanitize hutch after each group of calves has been transferred. Remove bedding and manure, and rotate hutch to new location (rotate back to original location for next group) ◆ Vinyl-strip door material is available from us for very cold/windy climates — see our Loyal Catalog GROUP HUTCH™ USES ARE UNLIMITED ◆ Group housing for goats, llamas, mini-horses, hogs, sheep, chickens, ostriches, etc. ◆ Feed storage — dry, cool, and portable ◆ Utility shed — equipment, tools, lawn/garden supplies, etc. ◆ Ice-fishing shanty (vinyl strip door material available) — see our Loyal Catalog Transitional housing – after isolation but before transfer to a larger group Steel pen shown for illustrative purposes only ... not included with group hutch (Front-view) Return to Index 24 24 Better Engineering — Stronger Construction More for your dollar — compare & save! Poly Group Hutch Other Brands More space ... higher ceiling clearance. 79" height allows freer movement of animals ... less stress – usable for longer growth periods Less space ... lower ceiling clearance. 72" height restricts movement of animals ... more stress – not usable for long growth periods Thicker walled ... extra strong for longer life. Approx. 250 lbs of plastic. Thinner walled ... thin and flimsy ... shorter life. Approx. 120 lbs of plastic. Superior, one-piece, poly-skid-frame ... thick plastic ... will not absorb water nor rot Soft-wood, skid frame ... absorbs water ... rots over time Heavy, one-piece design ... entire group hutch and poly-skid-frame molded together in one piece ... no rivets to break loose nor pull apart Lighter, multiple-part design ... many pieces rivited and screwed together Snow-white-poly reflects sun’s heat. Completely opaque – stops sun’s heat & UV rays from entering the hutch. Brighter interior ... calves eat more ... and grow faster. Dark, gloomy interior ... reflects heat and light ... calves eat less ... and grow slower Standard, adjustable, rear, rotary-top-vent ... for full front-to-back circulation Optional (you pay extra) rear vents NEW ... industry-exclusive, swing-up, bedding doors ... for easier bedding thru rear of group hutch Not available NEW ... superior ventilation design ... larger front vent and rear, rotary-top-vent; plus exclusive, sliding-grill-vents in rear doors, for maximum ventilation Minimum standard ventilation ... no sliding-grill-vents TM Number-one choice for large group calf housing (Front-view) (Rear-view) Opening the bedding doors Return to Index POLY GROUP HUTCH ™ 25 More for your dollar — compare & save! Longer, Taller, Heavier! Holds 4 to 6 Weaned Calves Largest, one-piece-molded group hutch you can buy ... Overall size: 106"W x 89"L x 79"H Heavy, one-piece design ... entire group hutch and poly-skid-frame molded together in one piece ... no rivets to break loose nor pull apart (Front-view) More space ... higher ceiling clearance. 79" height allows freer movement of animals ... less stress – usable for longer growth periods Steel pen shown for illustrative purposes only ... not included with group hutch Thicker walled ... extra strong for longer life. Approx. 250 lbs of plastic Superior, one-piece, poly-skid-frame ... thick plastic ... will not absorb water nor rot NEW ... industry-exclusive, swing-up, bedding doors ... for easier bedding thru rear of group hutch NEW ... superior ventilation design ... larger front vent and rear, rotary-top-vent; plus exclusive, sliding-grill-vents in rear doors for maximum ventilation Easier access to food and water ... for less stress, faster growth Opaque, virgin poly with UV blocker prevents major temperature swings (Rear-view) 10-year manufacturer’s limited warranty Number-one choice for transitional housing — after isolation but before transfer to a larger group Item No. Item Description GROUP-1PC Unit of Measure Hutch, Poly Group.................................................................. ea. Approx. Item Wt. Selling Price 250 lbs. $775.00 Return to Index Rolling, Group-Feeding Pen 26 Pen Rolls Ahead or Back for Easy Cleaning Aluminum Pen Construction... 3-Sealed, Plastic, Feed Troughs Simple, Pin-Together Corners... Fast, Easy, Set-Up and Knock Down For Calves Between 2 and 10 Weeks Old Lift Kit Rolling Group Feeding Pen 108" Wide x 96" Long Includes 3 Sealed Plastic Feed Troughs (No. AG-4036) Group Hutch milk feeder plastic feed trough Roller & Track Pen system does not include group hutch, lift kit or milk feeder Roll back & lift Rolls ahead or back Group-Hutch Lift Kit For use with skid fork or bale spear Top swivels left or right for easy entry (No. AG-4034) Swivel Top Item No. Description AG-4036 AG-4034 GROUP-1PC Unit of Measure Rolling, Group-Feeding Pen, 108" W x 96" L................... each (does not include group hutch, lift kit or milk feeder) Lift Kit (for group hutch).................................................... each Hutch, Poly Group............................................................ each Approx. Wt. Selling Price 145 lbs. $1219.00 5 lbs. 250 lbs. 56.00 775.00 Return to Index Transition-Pen System 27 Simple, Pin-Together Corners... Fast, Easy, Set-Up and Knock Down Aluminum Pen Construction... Sealed, Plastic, Feed Trough Wean Calves up to 20 Weeks Old... 2-Systems to Choose From ➀ System Standard Pen System 108" Wide x 192" Long Side Water Hole (No. AG-1033F) Lift Kit Group Hutch Pen system does not include group hutch, lift kit or water bucket ➁ Lift Kit System EXL Pen System 138" Wide x 192" Long Front Water Hole (No. AG-1034F) Group Hutch Pen system does not include group hutch, lift kit or water bucket Item No. Description AG-1033F AG-1034F AG-4034 GROUP-1PC Unit of Measure Pen System, 108" W x 192" L.......................................... each (does not include group hutch, lift kit, or water bucket) Pen System, 138" W x 192" L.......................................... each (does not include group hutch, lift kit, or water bucket) Lift Kit (for group hutch).................................................... each Hutch, Poly Group............................................................ each Approx. Wt. Selling Price 200 lbs. $1344.00 225 lbs. 1438.00 5 lbs. 250 lbs. 56.00 775.00 Return to Index LOYAL FANS — Wind 28 Tunnel Design Tips Average 36´W x 8´H barn requires about 3–4 fans. Large exhaust duct (see specs below) Fresh air inlets (use windows and doors — close ceiling inlets, hayholes, gutters & sidewall fans in summer to prevent “shortcircuiting” the end-to-end air flow). Loyal Exhaust Fans FAN CFM NEEDED Height For 2-1/2 MPH air flow = height x barn width x 220 For Barn width 3 MPH air flow = height x barn width x 264 Note: Total fan CFM should provide at least 450 CFM for each large-size holstein cow in hot weather. An air speed of 3 MPH helps evaporate water off cow. • The beauty of tunnel ventilation is that ALL of the fresh air which is pulled into the back end of the barn is drawn through the barn as a block of air (ceiling to floor and sidewall to sidewall), flowing over, under and around cows. The result is more complete air movement without “dead air” spots. All the air sucked into the tunnel (barn) is pulled through it (just like sucking through a straw!) Inside temperature is kept at or slightly below outside temperature. Many farmers claim it’s the next best thing to air conditioning! • 2-1/2 – 3 MPH summer air flow cools cows so they will eat and milk more. It cools down the barn faster in the evening and carries away heat, humid air, flies, dust, disease organisms and ammonia odor. Air flow dries feed alleys and reduces feed spoilage, keeping cows cleaner and extending equipment life. • Keep windows and doors closed — open only at the end of barn opposite fans. Barn must be “tight” to pull air through entire length. • Haymow installation illustrated — fans draw up more of warmer ceiling air, fans quieter, further from humans and animals, first floor windows can be kept for light, and fans remain easier to close off in winter. However, first floor installation eliminates need for hayholes and plywood air duct (preventing loss of mow space), but requires OSHA fan guards and possibly cattle-grate guards to protect fans (available from factory). • Fan(s) can also be mounted along sidewalls, close to end, if end wall space is limited. L-shaped barns should have all fans in one end and inlets at the extreme opposite end, not at the juncture of the two wings. T-shaped barns will need more total fan capacity to avoid different air velocities in the different wings. • Position fans to utilize prevailing wind if possible. However, consider fan exhaust odors if a house is nearby. The breeze from air being discharged into barn yard will reduce fly control costs. • If using thermostats, locate halfway down the barn. (Some farmers line them up with related fans for “more accurate temperature control.”) Set about 3º to 5º apart, starting at about 45°. Thermostat and on/off switch can be wired to a small pilot-light box, which lights up when related fan in haymow is operating. LARGE EXHAUST DUCT SPECS • Air pulled up through “hayhole type” opening (use inlet formula below to size opening). Duct height = top of fan. • Use 1/2" to 5/8" plywood with 2x4 framing. Caulk joints. If hay bales are to be stacked on top of exhaust duct, use thicker plywood and heavier post and beam construction. • Insulated plywood door (1-1/2" foam board) — hinged and opened with rope and pulley — closed in winter. Duct can have separate door to run just one fan (smallest) in winter. INLETS NEEDED • Summer inlet square feet needed (doors and windows) = Total fan CFM 400 or 500 or 600  (number to use varies between “experts”) • Hayhole-type exhaust opening in mow floor requires same square footage as above formula (adjust upward to allow for width of joists). • Undersized inlets will starve fans and reduce air flow by as much as 20% or more. • Increasing inlet openings will reduce static pressure and increase air flow. An inexpensive wind meter aids in adjusting window and door openings, to obtain correct air flow speed. A chemical smoke gun can also be used to locate dead spots (or shake and squeeze a bottle of talcum powder to check micro-currents). Smoke from a cigarette or other heat source may not accurately show air flow patterns because warm smoke tends to rise vs. follow air stream. • When temperature is below 60º, adjust inlets so outside air does not flow directly over cows. Use many smaller inlets vs. 1 or 2 large inlets. Close inlets in cooler areas of barn to slow air flow and open more inlets in warmer areas as required to speed air flow. • If you run one fan in winter, reduce inlet openings to slow air flow (slotted inlets, mounted toward or in ceiling, are often used). In coldest weather, you only need 32 CFM per 1,300 lb. cow (65 CFM for mild winter conditions and 130 CFM for spring and fall). Use timer and run fan only at intervals. Monitor cows to avoid freezeburn. ©2011 by Roth Mfg. Co., Inc. All rights reserved. Return to Index THE COLD FACTS vs. HOT AIR! 29 • Loyal’s special computer-designed, 4-wing blade provides quieter, higher air flow — with less amp draw to lower operating costs. • Extra-high efficiency, state-of-the-art motors. • Industrial-type, cast-iron greasable bearings — no stamped housings with rubber-ring inserts to wear out. • Linked shutter panels — no flapping. • Exclusive EZ-swivel shutter fasteners — for quick, tight mounting. • Heavier-gauge construction — for smoother, quieter operation (33% heavier-gauge housing than competitors’ cloned cone models). • Lock-nuts vs. metal screws keep fan tight and solid. • Loyal fan housings are factory assembled — we test-run every unit for 1/2 hour before shipping. REMEMBER — the higher the efficiency (CFM/watt), the lower your monthly electric bill. The higher the air volume (CFM), the fewer fans you’ll need to buy. Don’t make the mistake of buying an inefficient, low-volume fan when you can have a top-rated Loyal Fan for less money! COMPARING APPLES TO ORANGES? Don’t get fooled — some desperate fan manufacturers are advertising their fan CFM/watt and CFM, but are not disclosing that those performance numbers are at non-real-world .00" S.P. vs. .05" S.P. (as listed on electric company fan rebate lists). Some are advertising “highest CFM/watt,” but are not disclosing that it’s for low vs. high speed and for .00" S.P. vs. .05" S.P. Some are also comparing the price and performance of their fans WITHOUT a shutter to ours WITH a shutter. Demand straight talk! Return to Index 30 WHY THIS IS THE BEST FAN-DRIVE-SYSTEM! LOYAL WALL FANS (48" & 36") INDUSTRIAL-QUALITY CONSTRUCTION Designed for Extended Use (Not a light, noisy 3-wing fan!) • Unmatched rigidity — in/out, up/down, and side to side • High-strength, 1-1/2" square tubing — thicker-walled 11 ga. 70% more rigid than comparable formed-angle, channel or round-tube mounts • Sturdy, 4-wing blade eliminates “helicopter” sound produced by 3-wing blades. Less noise = less animal stress. • Thicker, reinforced, all-welded fan-blade hub (not ‘stamped’ steel) • Tube-mount set back 6" from blade ... to maximize quietness • Thicker 12 ga. oversize motor/bearing plate ... with formed-angle lip for added strength ... heaviest on market. Welded (not bolted) to tube mount. • Deep-drawn, 14 ga. venturi — for better air flow • Tube mount is bolted to venturi with eight-3/8" bolts (grade 5) and nylon-insert lock nuts STRONGER SQUARE-TUBE MOUNT (All-Welded) Less Vibration — Longer Bearing, Shaft & Belt Life Whisper-Smooth Operation • Matched ‘Browning’ cast-iron pulleys • Heaviest fan on market — 48" cone fan weighs 355 lbs. POWER TWIST™ LINK BELT • High-strength, low-stretch, longer life ... simply remove the links to adjust tension (no wrenches required). • Eliminates the need for hinged, motor mount and spring-loaded belt tensioner ... avoids stretched belts from motor-bouncing ... causing motor-mount hinges and spring tensioners to wear out ... which causes even greater motor bouncing and shortened belt, bearing and shaft life. • Elimination of hinged, motor-mount and spring tensioner also provides better pulley alignment ... longer belt life. Return to Index TUNNEL VENTILATION — LOYAL CONE FANS 31 Ranked Higher in Efficiency by the University of Illinois! Higher, Quieter Air Flow Lower Priced 33% heavier-gauge housing than competitors’ clone models Aerodynamically Engineered! Oversized intake opening — increases air flow capacity Specially-engineered cone — reduces back pressure and boosts air performance LOY CONAL FAN E Aluminum shutters — micro balanced to reduce air drag Blade computer matched to motor to tweak-out maximum efficiency Exclusive EZ-swivel shutter fasteners — for quick, tight mounting Pulley-diameter/belt-style combination computer optimized to maximize air flow without overloading motor Housing extends straight-out, thru wall, for tighter wall seal Extra-deep orifice accelerates air-flow Housing slopes down, beyond wall, for less air resistance, and to protect components from weather, plus aid in runoff REMEMBER — the higher the efficiency (CFM/watt), the lower your monthly electric bill. The higher the air volume (CFM), the fewer fans you’ll need to buy. Don’t make the mistake of buying an inefficient, low-volume fan when you can have a top-rated Loyal Fan for less money! LOYAL CONE FANS (qualify for Electric Co. rebates) (A) Blade Aluminum Rough Opening At .00" S. P. with At .05" S. P. with Approx. Item Shutter Required Motor Shutter & Guard (B) Shutter & Guard (B) Selling Shipping Wings Size H  x  W HP Price Weight No. Size Speed CFM/watt CFM CFM/watt CFM   SW24-B3 24" 3 30" See chart below 1/3 1 14.8 6,100 13.3 5,700 $  535.00 140 lbs.  WF36-8 36" 5 42" See chart below 1 1 N/A 12,200 N/A 11,400 950.00 315 lbs.  WF36-8-2S 36" 5 42" See chart below 1 2 N/A 12,200 N/A 11,400 995.00 315 lbs.  WF48-6-4 48" 4 54" See chart below 1 1 24.6 22,500 21.7 21,100 1,050.00 405 lbs.  WF48-2A-4 48" 4 54" See chart below 1 2 25.2 21,400 22.2 20,000 1,095.00 405 lbs. (A) Some electric companies may offer rebates. Check with your local electric company. (B) Tested by the University of Illinois — BESS Lab. OSHA GUARDS               If wall fan is within 7' of floor or working level, or within reach of people, order OSHA-compliant intake guards. OSHA guards are constructed of 1 x 2" mesh (includes mounting hardware). Item Selling OG54 56" OSHA Guard 36.00 No. Description Used On Price _____________________________________ _____________________________________ OG42 44" OSHA Guard 36" Cone Fan $31.00 48" Cone Fan CATTLE GUARDS Grate-type intake cattle guards (constructed of 1/2" rounds), available for 36" and 48" fans. Includes built-in OSHA guard. Use when fans installed on first floor near animals. Item Selling _____________________________________ No. Description Used On Price _____________________________________ CG42 42" Cattle Guard 36" Cone Fan $167.00 CG54 54" Cattle Guard 48" Cone Fan 232.00 Item No. 4E636 4E665 Description 1-Speed Thermostat (3ºF differential) 2-Speed Thermostat (3ºF differential) Rough Opening Required Wall 48" Fan 36" Fan 24" Fan Thickness H W H W H W 3-1/2" 55-1/2" 55" 43-1/2" 43" 31-1/2" 31" 4-1/2" 56" 55" 44" 43" 32" 31" 7-1/2" 56-1/2" 55" 44-1/2" 43" 32-1/2" 31" 9-1/2" 57" 55" 45" 43" 33" 31" 11-1/2" 57-1/2" 55" 45-1/2" 43" 33-1/2" 31" 15" 58-1/2" 55" 46-1/2" 43" 34-1/2" 31" Over 15"– add 1" to height for every 4" increase in wall thickness THREE-PHASE MOTORS For three-phase motor on 48" one-speed fans, call factory for price. Three-phase 2-speed motors are not available. Note: Use of three-phase motors with thermostats will require purchase of an adaptor—check with your electrician. THERMOSTATS Moisture-Proof Enclosure? Yes Yes Amps 16/8 12/10 Volts 120/240 120/240 Selling Price $42.00 99.00 Return to Index TUNNEL VENTILATION — LOYAL BOX FANS 32 Economical Ventilation Blade computer matched to motor to tweak-out maximum efficiency Aluminum shutters — panels linked to prevent flapping LOYAL BOX FAN Pulley-diameter/belt-style combination computer optimized to maximize air flow without overloading motor 1" x 2" zinc-plated, wire-mesh discharge guard LOYAL BOX FANS (qualify for Electric Co. rebates) (A) Blade Aluminum Opening At .00" S. P. with At .05" S. P. with Approx. Motor Shutter & Guard (B) Shutter & Guard (B) Selling Shipping Required Item Shutter Wings Size H  x  W HP Price Weight No. Size Speed CFM/watt CFM CFM/watt CFM  BW48-6A-4 48" 4 48" 54-3/4" x 54-3/4" 1 1 21.5 19,700 19.5 18,600 $1,000.00 310 lbs.  BW48-2B-4 48" 4 48" 54-3/4" x 54-3/4" 1 2 21.6 18,800 19.6 17,600 1,045.00 310 lbs. (A) Some electric companies may offer rebates. Check with your local electric company. (B) Tested by the University of Illinois — BESS Lab. OSHA GUARDS If wall fan is within 7´ of floor or working level, or within reach of people, order OSHA-compliant intake guards. OSHA guards are constructed of 1 x 2" mesh (includes mounting hardware). THREE-PHASE MOTORS Item Selling _____________________________________ No. Description Used On Price For three-phase motor on 48” one-speed fans, call factory for price. OG48 50" OSHA Guard 48" Box Fan $34.00 Three-phase two-speed motors are not available. CATTLE GUARDS Grate-type intake cattle guards (constructed of 1/2" rounds), available for 48" fans. Includes built-in OSHA guard. Use when fans installed on first floor near animals. Note: Use of three-phase motors with thermostats will require purchase of an adaptor — check with your electrician. Item Selling ____________________________________ No. Description Used On Price CG48 48" Cattle Guard Item No. 4E636 4E665 48" Box Fan $209.00 Description 1-Speed Thermostat (3ºF differential) 2-Speed Thermostat (3ºF differential) THERMOSTATS Moisture-Proof Enclosure? Yes Yes Amps 16/8 12/10 Volts 120/240 120/240 Selling Price $42.00 99.00 NEED  HELP? Whether you have specific questions ... or would merely like more information, we welcome your inquiries! Call: 1-800-472-2341 Fax: 1-800-677-2341 www.loyal-roth.com E-mail:  [email protected] Return to Index LOYAL MILKING PARLOR FANS 33 Blows Clean Outside Air Into Parlor and Out the Holding-Area Doors. Specially Designed for Quieter Parlor Operation A LOYAL PARLOR FAN Air Blows Into Parlor C B 36" and 48" available with one- or two-speed motors PVC shutters with aluminum frames for quiet operation Typical parlor uses 3-fans (see illustration below) Pressurizes parlor with clean outside air Control with one-speed switch, two-speed switch, or thermostat Thicker 12 ga., oversize motor/bearing plate HOLDING AREA More rigid — less vibration Cow Pit Cow Platform Platform Air Air Air Flow Flow Flow Exit Lane Exit Lane • • • • • Stronger square tube mount NOT FOR WINTER USE. Fans must be closed off or covered during belowfreezing weather. Outside winds may push shutter open and allow belowfreezing air into parlor, resulting in freezeups. FAN FAN FAN Item No.   BW36-B1-PFA   BW36-2B-PFA   BW48-6A-5-PFA   BW48-2B-5-PFA Blade Size Wings 36" 5 36" 5 48" 5 48" 5 LOYAL MILKING PARLOR FANS Dimensions Approx. HP Speed Selling Price Shipping Wt. A B C 42-1/2" 33-1/4" 42-1/2" 1 1 $1,025.00  300 lbs. 42-1/2" 33-1/4" 42-1/2" 1 2 1,070.00 300 lbs. 54-1/2" 33-1/4" 54-1/2" 1 1 1,125.00 325 lbs. 54-1/2" 33-1/4" 54-1/2" 1 2 1,170.00 325 lbs. Parlor Fan cannot be installed within 7´ of floor. It must be installed above 7´ and out of reach of people. Return to Index 34 DETACHABLE DOUBLE-CHAIN LOYAL 18" POLY ELEVATOR Poly-Clad,® marine-plywood ... Resists feed acids for longer life More rigid than wood or solid-poly board ... Quieter, higher-volume operation Safety shields removed for display purposes only Poly-Clad® on underside also — to prevent rotting from floor moisture DIMENSIONS: •  Overall width: 19-1/2" •  Trough width: 18" FEATURES: •  Hi-density poly “skins" are pressure-bonded over both sides of marine plywood (special 7-ply); for a stronger, longer-lasting elevator •  Won’t sag, unlike solid-poly board •  More rigid than wood board or solid-poly board; won’t warp •  #62 detachable chain •  Poly flites — 1-1/2"H x 1/2" thick for higher volume •  Cast-iron sprockets — 10-tooth •  Greasable bearings •  Adjustable, slip clutch •  Simple to install — measure on site — cut length, angles & drop-out for custom fit •  Bottom-delivery conveyor chain rides on special poly rails — no pan for chain to drag on, nor freeze down to •  Separate UHMW-Poly roller-chain adjustment doesn’t affect trough-chain take-up •  Overall depth: 9-1/4" •  Trough depth: 8-1/4" •  Lengths up to 80'  Decline Options: HIGHER VOLUME! •  Inclines Safety shields removed for display purposes only •  Declines •  Hoppers Incline  •  Covers WHY POLY-CLAD® CONSTRUCTION IS BETTER! Poly-Clad specially-engineered marine plywood combines poly’s resistance to feed acids with plywoods rigidity. Won’t sag (unlike solid-poly), nor rot/warp (unlike wood board). Poly-Clad® marine plywood has been successfully used by major manure-spreader and chopper-box manufacturers for years. It won’t rot, rust, warp, or need refinishing. It’s totally resistant to most chemicals. Poly-Clad® 3/4" plywood is specially engineered to meet the strict performance criteria of the marine industry (US Product Standard PS I-83). It is carefully manufactured from 100%, 7-ply Douglas fir (dried to 8% or less) and marine glue, for maximum strength and flatness. A .030" white, high-density, UV-stabilized, poly facing and a .015" poly backing are then pressure bonded, using an exterior glue, to provide a 100% moisture barrier. Poly-Clad® facing/backing won’t ever need painting. Poly-Clad® acts as a protective wear surface against abrasion and reduces shear forces transmitted into the plywood ... resulting in a stronger, quieter-running elevator. ® Return to Index 35 DETACHABLE DOUBLE-CHAIN LOYAL 18" POLY ELEVATOR PRICE LIST   STARTER UNIT — must be ordered Selling Item No. Description Price D___ Starter Unit (includes drive and idler hardware — factory installed,        plus V-belt; does not include any sections/footage)......................... $852.00 (ORDER MOTOR, PULLEY & HOPPER SEPARATELY — SEE BELOW)   SECTIONS — order as needed   Recommended Maximum Length - 80' D___ Elevator Section (includes #62 detachable chain with poly flites, and poly guide rails for conveyor chain). Specify if drive, middle, or idler — and length — up to 10'.  ........................................................................... per foot 68.30   ACCESSORIES DA100-10 Cover (10' sections) .................................................................................... each DA200 Hopper (12"H x 24"L x 32"L) ................................................................................. DA300 Incline — factory installed on elevator sections above.......................................... DA300K Incline Kit — includes hardware and angles for on-site installation...................... DA400 Decline — factory installed on elevator sections above......................................... DA400K Decline Kit — includes hardware and angles for on-site installation..................... DA500 Drop Out (18"W x 24"L) — factory installed on elevator sections above .............. DA500K Drop Out Kit (18"W x 24"L) — includes hardware for on-site installation.............. DA600 Two-way Discharge — factory installed................................................................ DDC62__ Replacement Double Chain — #62 with poly flites (1-1/2"H x 1/2"T x 14-1/2"W) .................................................................... per foot TDA850-1 Additional Baffle – factory installed ................................... per foot of conveyor 113.00 153.00 236.00 161.00 244.00 111.00 119.00 89.00 199.00 16.70 7.40   TAPERBOARD FEEDERS TF___ Drive Unit and Idler (does not include any footage )............................................ TF__B Bottom Taperboard Feeder Section (includes chain) ............................ per foot TFA8001__ Solid Top with sides for Bottom Taperboard Sections ........................ per foot SELECTING THE RIGHT SIZE MOTOR MOTOR PULLEYS Elevator Length Motor HP ___________________________________________ 1' to 24' 1 ___________________________________________ 24' to 50' 1-1/2 ___________________________________________ 50' to 80' (A) 2 ___________________________________________ (A) Recommended Maximum Length • Cast-iron... single-groove • Precision machined for perfect balance • Solid construction on fixed bore with hollow-head set screw and standard keyway Item No. Type O.D. Bore +  AK28X5/8 BK32X1-1/8 A A/B 2.8" Selling Price 5/8" $11.00 2.6"/3.0" 1-1/8" 29.90 + Generally recommended for elevators • Heavy-duty, Farm Rated, single-phase • TEFC (Totally Enclosed Fan Cooled) • Capacitor-start... rotation easily reversed • 1-year limited motor warranty • Motor cord & switch not included (purchase from your electrician) ELECTRIC MOTORS 852.00 74.00 21.00 • Manual reset for thermal protection • Prelubricated, double-shielded ball bearings • Both windings and grease effective at temperatures down to minus 40°F • Motors supplied with slinger on shaft and gasketed conduit box Approx. Item Frame Approx. F.L. Shipping Selling No. HP RPM Shaft Dia. Size Amps Voltage Weight Price __________________________________________________________________________________ MT104 1 1725 5/8" 56 14.0/7.0 115/230 34 lbs. $245.00 __________________________________________________________________________________ MT105 1-1/2 1725 5/8" 56 H 17.4/8.7 115/230 46 lbs. 297.00 __________________________________________________________________________________ MT106 2 1740 1-1/8" 182 T 20.0/10.0 115/230 88 lbs. 485.00 * __________________________________________________________________________________ MT107 3 1740 1-1/8" 184 T 14.5 230 90 lbs. 582.00 *Heavier 182 frame (rather than lighter 145 frame) recommended for our elevators—provides better starting performance/longer life. Electric motor must be totally enclosed, fan cooled and have a manual reset overload protector. Motor starting, stopping and motor reset controls must be located so that the operator has view of the entire operation. Wiring should be done by a certified electrician in accordance with local and national codes. Covers (see above) are required on all lower sections of elevator located within 7' of floor or working level or within reach of people. Failure to heed could result in personal injury or death. Return to Index 36 LOYAL GALVANIZED SILAGE & MATERIAL ELEVATORS (SINGLE CHAIN) 7," 9," 11" and 13" width elevators ering tion e n i g c er en constru t t e d • B onger ore tion ty shieldsrrpeomseosveonly m r t , r a Safe play pu • S oothe is oper for d e l m b S a • d pen ce de der choi ies r • Wi accesso of wer cost • Lo Heavy-duty full-width cross shaft, and chain final-reduction drive standard on all elevators Flights are closer spaced and have wider steel backs than many other brands for faster feed delivery and minimum rideup Heavier-gauge pan than most other brands Conveyor chain take-up E-Z Open Cleanout Hole with Swinging Door provides quick access to boot EXCLUSIVE Boot Guard with Agitator • Heavy-service, belt-type guard attached to sturdy hinge on boot • Guard rests on flights — movement of flights provides agitating action — keeps material or silage out of boot and moving up the elevator Boot has been moved closer to chain flights for improved cleanout Two — not just one — greaseable, bronze pillowblock bearings on each idler, drive and cross shaft for longer sprocket, shaft and bearing life • Loyal elevators are preferred for their rugged but simple construction — they provide economical and smoother, more trouble-free operation for years and years of hard use • Designed for efficient, low cost handling of silage, haylage, wet corn, cob corn, small grains and coarse ground feeds, meals, manure, canning waste, sawdust shavings and other materials • Includes three-sided sliding incline hopper, top-slung sliding motor mount and required belts (Farm-Rated T.E.F.C. motors optional) • Set up and ready to go (just mount motor and install safety shields). We test run before shipping. • Special design enables us to provide any length up to 12' in ONE PIECE — eliminates time consuming bolting by customer. Can be easily lengthened at a later date • Simple but sturdy angle iron connecting joint used for longer lengths — strongest structural design available — easy to connect — joints bolt to each other quickly. Connecting joints can be factory installed any point along elevator. • Heavier-gauge, rust-resistant galvanized steel construction resists forage acids for longer life • High-grade, corded-rubber ‘plow contour’ flights are reinforced with rugged steel brackets — flights are closer spaced for faster, higher-capacity feed delivery with minimum rideup • Sturdy, detachable or pintle conveyor chain is tempered hard for longer wear • Conveyor-chain take-up (bolt type) located at discharge end. Fast and simple to adjust — up to 2" adjustment — few turns of two nuts are all that is required. Doesn’t affect roller-chain drive adjustment • Enclosed lower trough for clean chain return and extra strength • Heavy cast-iron, drive and idler shaft, conveyor-chain sprockets — sprocket design helps prevent material buildup between chain and sprocket • Bronze, pillow-block bearings with grease fittings — resist forage acids for longer life. Two bearings — not just one — on each idler, drive and cross shaft to reduce wear on sprockets, shafts and bearings • Sliding motor mount may be set at any point along top elevator flange • Heavy-gauge steel fixed boot — equipped with water drain holes to help prevent freeze-up in cold weather • Replacement pan or trough easily slips over existing pan or outside bottom trough, without having to replace sides of trough (pop rivet or tack weld to existing pan or trough) • Wider choice of accessories to custom-make a one-man feeding system. Available with transports, motors, declines, covers, special hoppers, hoods, downspouts and diverters Electric motor must be totally enclosed, fan cooled and have a manual reset overload protector. Motor starting, stopping and motor reset controls must be located so that the operator has view of the entire operation. Wiring should be done by a certified electrician in accordance with local and national codes. Covers (see above) are required on all lower sections of elevator located within 7' of floor or working level or within reach of people. Failure to heed could result in personal injury or death. Return to Index 37 SELECTING THE RIGHT WIDTH ELEVATOR To operate your conveying system at maximum efficiency, your material handling requirements must be properly matched with the optimum elevator width. We offer a complete selection of elevator widths ... 7," 9," 11" and 13" ... to meet different material handling requirements. Silages and haylages: 7" WIDTH — will usually handle silo unloaders up to 5 HP 9" WIDTH — will handle most sizes of silo unloaders 11" and 13" WIDTH — use where two large silo unloaders are discharging into elevator at once. Manure: We recommend a 9," 11" or 13" elevator Small grains and coarse ground feeds: 7," 9," 11" or 13" elevators will handle well. Do not position elevator at an angle greater than 45° Saw mill sawdust shavings: We recommend a 9," 11" or 13" elevator Canning waste: Use a 9," 11" or 13" elevator Whole ear corn: A 7," 9," 11" or 13" elevator can be used. RECOMMENDED MAXIMUM LENGTH Wet shell corn (whole or ground) and ground ear corn: A 9," 11" or 13" elevator can be used. A 7" elevator is not recommended Elevator Width Maximum Length   7" 24'  9" 42' 11" 60' 13" 60' Meals: We recommend an 11" or 13" elevators. Do not overload, especially for soybean meal SELECTING THE RIGHT SIZE MOTOR SELECTING THE RIGHT LENGTH ELEVATOR (for light materials) Elevator Length 7" Width 9" Width 11" Width 13" Width 6' to 10' 1/2 HP 3/4 HP 3/4 HP 3/4 to 1 HP 10' to 24' 3/4 HP 1 HP 1 HP 1 to 1-1/2 HP 24' to 36' *  1 to 1-1/2 HP 1-1/2 HP 1-1/2 to 2 HP 36' to 50' *  1 to 1-1/2 HP * 1-1/2 HP 1-1/2 to 2 HP 50' to 60' *  * 2 HP 2 to 3 HP INCLINE CHART Scale: 1 square = 1 foot * Refer to “Recommended Maximum Length" table at right. SELECTING THE RIGHT SIZE MOTOR PULLEY Use a 2.8" O.D. Type A cast-iron or steel pulley 0' 5' 10' 15' 20' 25' 30' 35' 40' Horizontal Length SPECIFICATIONS ELEVATOR LENGTH TROUGH CROSS SECTION INCLINE HOPPER A B Effective Length Overall Length Overall length = Effective length plus: 8" — for 7" width 9" — for 9," 11" and 13" widths C Dimensions Elevator Width A B C D E  7" Width   7" 11" 13" 2" 5"  9" Width   9" 13" 15" 2" 6" 11" Width 11" 13" 17" 2" 6" 13" Width 13" 13" 19" 2" 6" Dimensions Elevator Width A B C  7" Width 26" 13" 35"  9" Width 28" 13" 35" 11" Width 30" 13" 35" 13" Width 32" 13" 35" CONNECTING JOINTS • Furnished on elevator lengths over 14' (for ease of delivery). Factory installed at any point along elevator — specify location (usually at midpoint for easiest handling). Also furnished on shorter length elevators, at no charge, if requested. • Joints constructed of sturdier angle iron — prevents bowing, twisting and bending — eliminates stretching. Stronger than flat connector plates. • Simple to connect — joints bolt to each other quickly. Return to Index 38 LOYAL GALVANIZED SILAGE & MATERIAL ELEVATORS Heavy-Duty Full-Width Cross-Shaft No. 40 Roller-Chain Final Reduction Drive Includes incline hopper, motor mount, and required belts. Set up and ready to go — just mount motor (not included) and install shields. Connecting joints furnished on lengths over 12' — factory installed at any point along elevator. Specify location (usually mid-point for ease of handling). Also furnished on shorter length elevators at no charge, if requested. Standard poly wear liner protects pan — super-slick, self-lubricating liner prevents freezedown ... reduces chain stretching ... increases chain life, cuts noise levels and lowers energy consumption by up to 30%. DETACHABLE SINGLE-CHAIN 7" WIDTH GALVANIZED ELEVATOR (includes heavy-duty, full-width cross shaft and a two, not one-bearing, idler shaft) Gauge of With 1/4" Galvanized Steel Steel Poly Wear Liner Item Effective Detachable Selling No. Length Pan Trough Chain No. Wt. Price L76DP   6' 14 ga. 18 ga. No. 55 124 lbs. $  892.00 L78DP   8' 14 ga. 18 ga. No. 55 146 lbs. 985.00 L710DP 10' 14 ga. 18 ga. No. 55 167 lbs. 1042.00 L712DP 12' 14 ga. 18 ga. No. 55 188 lbs. 1129.00 L714DP 14' 14 ga. 18 ga. No. 55 210 lbs. 1194.00 L716DP 16' 14 ga. 18 ga. No. 55 231 lbs. 1274.00 L718DP 18' 14 ga. 18 ga. No. 55 253 lbs. 1354.00 L720DP 20' 14 ga. 18 ga. No. 55 274 lbs. 1444.00 L722DP 22' 14 ga. 18 ga. No. 55 295 lbs. 1514.00 L724DP 24' 14 ga. 18 ga. No. 55 317 lbs. 1640.00 Recommended Maximum Length: 7" Width — 24' PINTLE SINGLE-CHAIN 9" WIDTH GALVANIZED ELEVATOR (includes heavy-duty, full-width cross shaft and a two, not one-bearing, idler shaft) Gauge of With 1/4" Galvanized Steel Poly Wear Liner Item Effective Pintle Selling No. Length Pan Trough Chain No. Wt. Price L96PP   6' 14 ga. 16 ga. No. 662 140 lbs. $  946.00 L98PP   8' 14 ga. 16 ga. No. 662 170 lbs. 1077.00 L910PP 10' 14 ga. 16 ga. No. 662 200 lbs. 1120.00 L912PP 12' 14 ga. 16 ga. No. 662 230 lbs. 1249.00 L914PP 14' 14 ga. 16 ga. No. 662 260 lbs. 1320.00 L916PP 16' 14 ga. 16 ga. No. 662 289 lbs. 1446.00 L918PP 18' 14 ga. 16 ga. No. 662 319 lbs. 1494.00 L920PP 20' 14 ga. 16 ga. No. 662 349 lbs. 1630.00 L922PP 22' 14 ga. 16 ga. No. 662 379 lbs. 1695.00 L924PP 24' 14 ga. 16 ga. No. 662 409 lbs. 1818.00 L926PP 26' 14 ga. 16 ga. No. 662 438 lbs. 1873.00 L928PP 28' 14 ga. 16 ga. No. 662 468 lbs. 2005.00 L930PP 30' 14 ga. 16 ga. No. 662 498 lbs. 2074.00 L932PP 32' 14 ga. 16 ga. No. 662 528 lbs. 2193.00 Over 32' – per foot 14 ga. 16 ga. No. 662 14.9 lbs. 50.00 Recommended Maximum Length: 9" Width — 42' Return to Index LOYAL GALVANIZED SILAGE & MATERIAL ELEVATORS 39 Heavy-Duty #667H Pintle Chain with 14" Flight Spacing Rugged, 1-1/4" Diameter Shafts — No. 40 Roller-Chain Final Reduction Drive DON’T BE FOOLED! Important information when buying chain: We’ve seen chain with a very-low tensile strength being marketed. The tensile strength on 667H chain we had tested was only 5,500# versus 9,500# on the chain that we sell. Avoid the “horror-stories" of premature chain-failure and accelerated, sprocket wear from low-tensile chain. We offer high-tensile chain ... and at a lower price! PINTLE SINGLE-CHAIN 11" WIDTH GALVANIZED ELEVATOR (includes heavy-duty, full-width cross shaft and a two, not one-bearing idler shaft) Gauge of With 1/4" Galvanized Steel Poly Wear Liner Item Effective Pintle Selling No. Length Pan Trough Chain No. Wt. Price L116PP   6' 14 ga. 16 ga. No. 667H 162 lbs. $1284.00 L118PP   8' 14 ga. 16 ga. No. 667H 196 lbs. 1352.00 L1110PP 10' 14 ga. 16 ga. No. 667H 230 lbs. 1422.00 L1112PP 12' 14 ga. 16 ga. No. 667H 264 lbs. 1521.00 L1114PP 14' 14 ga. 16 ga. No. 667H 298 lbs. 1648.00 L1116PP 16' 14 ga. 16 ga. No. 667H 333 lbs. 1767.00 L1118PP 18' 14 ga. 16 ga. No. 667H 367 lbs. 1904.00 L1120PP 20' 14 ga. 16 ga. No. 667H 401 lbs. 2048.00 L1122PP 22' 14 ga. 16 ga. No. 667H 435 lbs. 2201.00 L1124PP 24' 14 ga. 16 ga. No. 667H 469 lbs. 2319.00 L1126PP 26' 14 ga. 16 ga. No. 667H 504 lbs. 2471.00 L1128PP 28' 14 ga. 16 ga. No. 667H 538 lbs. 2670.00 L1130PP 30' 14 ga. 16 ga. No. 667H 572 lbs. 2711.00 L1132PP 32' 14 ga. 16 ga. No. 667H 606 lbs. 2920.00 Over 32' – per foot 14 ga. 16 ga. No. 667H 17.1 lbs. 56.00 Recommended Maximum Length: 11" Width — 60' PINTLE SINGLE-CHAIN 13" WIDTH GALVANIZED ELEVATOR (includes heavy-duty, full-width cross shaft and a two, not one-bearing idler shaft) Gauge of With 1/4" Galvanized Steel Poly Wear Liner Item Effective Pintle Selling No. Length Pan Trough Chain No. Wt. Price L136PP   6' 14 ga. 16 ga. No. 667H 181 lbs. $1405.00 L138PP   8' 14 ga. 16 ga. No. 667H 219 lbs. 1475.00 L1310PP 10' 14 ga. 16 ga. No. 667H 258 lbs. 1558.00 L1312PP 12' 14 ga. 16 ga. No. 667H 297 lbs. 1667.00 L1314PP 14' 14 ga. 16 ga. No. 667H 335 lbs. 1804.00 L1316PP 16' 14 ga. 16 ga. No. 667H 374 lbs. 1938.00 L1318PP 18' 14 ga. 16 ga. No. 667H 412 lbs. 2091.00 L1320PP 20' 14 ga. 16 ga. No. 667H 451 lbs. 2244.00 L1322PP 22' 14 ga. 16 ga. No. 667H 490 lbs. 2416.00 L1324PP 24' 14 ga. 16 ga. No. 667H 528 lbs. 2546.00 L1326PP 26' 14 ga. 16 ga. No. 667H 567 lbs. 2712.00 L1328PP 28' 14 ga. 16 ga. No. 667H 605 lbs. 2926.00 L1330PP 30' 14 ga. 16 ga. No. 667H 644 lbs. 2975.00 L1332PP 32' 14 ga. 16 ga. No. 667H 683 lbs. 3205.00 Over 32' – per foot 14 ga. 16 ga. No. 667H 19.3 lbs. 63.00 Recommended Maximum Length: 13" Width — 60' Return to Index 40 LOYAL ELEVATOR ACCESSORIES • Heavy-duty, Farm Rated, single phase TEFC (Totally Enclosed Fan Cooled) • Capacitor-start... Rotation easily reversed • Manual reset for thermal protection • Prelubricated, double-shielded ball bearings • Both windings and grease effective at temperatures down to minus 40° F • Motors supplied with slinger on shaft and gasketed conduit box • 1-year limited motor warranty • Motor cord & switch not included (purchase from your electrician) ELECTRIC MOTORS Item Frame Approx. F.L. Approx. Selling 90 lbs. 582.00 No. HP RPM Shaft Dia. Size Amps Voltage Shipping Weight Price __________________________________________________________________________________ MT102 1/2 1725 5/8" 56 7.4/3.7 115/230 25 lbs. $183.00 ___________________________________________________________________________________ MT103 3/4 1725 5/8" 56 10.6/5.3 115/230 29 lbs. 220.00 _________________________________________________________________________________ MT104 1 1725 5/8" 56 14.0/7.0 115/230 34 lbs. 245.00 _________________________________________________________________________________ MT105 1-1/2 1725 5/8" 56 H 17.4/8.7 115/230 46 lbs. 297.00 _________________________________________________________________________________ MT106 2 1740 1-1/8" 182 T 20.0/10.0 115/230 88 lbs. 485.00 * _________________________________________________________________________________ MT107 3 1740 1-1/8" 184 T 14.5 230 *Heavier 182 frame (rather than lighter 145 frame) recommended for our elevators—provides better starting performance/longer life. Electric motor must be totally enclosed, fan cooled and have a manual reset overload protector. Motor starting, stopping and motor reset controls must be located so that the operator has view of the entire operation. Wiring should be done by a certified electrician in accordance with local and national codes. MOTOR PULLEYS COVERS • Cast-iron... single-groove • Precision machined for perfect balance • Solid construction on fixed bore with hollow-head set screw and standard keyway Covers are required on all lower sections of elevator located less than 7 feet above the floor level. Failure to install could result in personal injury or death. • Ideal for shielding materials from rain and snow • Prevents wind from blowing light material out of trough • Covers snap on easily — can be quickly removed for operator inspection   NOTE: When ordering — reduce length by 2' to allow for hopper    Covers available in the following lengths only: Item No. Item No. Type O.D. Bore +  AK28X5/8 BK32X1-1/8 A A/B 2.8" Selling Price 5/8" $11.00 2.6"/3.0" 1-1/8" 29.90 + Generally recommended for elevators Selling Price EC72-M EC74 EC78 EC92-M EC94 EC98 EC112-M EC114 EC118 EC132-M EC134 EC138 DECLINE 2' Cover–for under motor (7" elev.)....................... $15.00 4' Cover (7" elev.)................................................. 30.00 8' Cover (7" elev.)................................................. 60.00 2' Cover–for under motor (9" elev.)....................... 16.80 4' Cover (9" elev.)................................................. 33.60 8' Cover (9" elev.)................................................. 67.20 2' Cover–for under motor (11" elev.)..................... 19.30 4' Cover (11" elev.)............................................... 38.60 8' Cover (11" elev.)............................................... 77.20 2' Cover–for under motor (13" elev.)..................... 20.60 4' Cover (13" elev.)............................................... 41.20 8' Cover (13" elev.)............................................... 82.40 • Easily adjusts up to 40° angle • Permits custom installations under or over obstacles • Decline sections can be factory installed at any point along elevator • 4' decline furnished with sturdier, angle-iron connecting joints • Self-lubricating poly wear liner at hinge — for quieter, longer-life operation DE94PP 4' Decline (for 9" width elevator) .................... $479.50 DE114PP 4' Decline (for 11" width elevator) .................. 515.45 DE134PP 4' Decline (for 13" width elevator) .................. 573.95 NOTE: Declines furnished with chain and with poly liner for pan. TRANSPORTS Move your elevator with ease to exactly where you want it. Transport can be quickly raised from towing position. Sturdy, easy-to-operate hand winch features automatic brake system for positive load control. Slow-speed model max speed – 20 MPH. Slow-speed models have ag-type 15" – 4-bolt wheels with regreasable, tapered roller bearings (rubber tires not included). When ordered with an elevator, the transport includes a boot hitch and extra-long 100" Type A belt for cross shaft to motor (since motor mount is generally moved far enough back toward boot end of elevator for 100" belt–provides better balancing of elevator on transport), plus 2-piece drive shield. Boot hitch, belt and shield can be ordered separately (if needed for previously purchased Loyal Elevator). Do not mount a longer  length elevator than   recommended below.     Failure to heed could     result in personal      injury or death. (No. EC3 Transport illustrated) Item No. Type of Transport Wheels ET2__ ET2__ ET3__ ET3__ ET3SS__ ET3SS__ Offroad Offroad Offroad Offroad Slow speed Slow speed Axle Width* For Elevator Sizes Elevator Widths Elevator Lengths Selling Price 400 x 800 wheelbarrow   64" 7" & 9" 10' through 16' $ 865.60 400 x 800 wheelbarrow   64" 11" & 13" 10' through 16' 885.80 400 x 800 wheelbarrow   64" 7" & 9" 18' through 26' 986.70 400 x 800 wheelbarrow   64" 11" 18' through 24' 1006.90 15" rim (less rubber)   63" 7" & 9" 18' through 26' 1119.90 15" rim (less rubber)   63" 11" 18' through 24' 1160.20 *Offroad models = outside of tire to outside of tire. Slow-speed models = center of tire to center of tire (outside width will vary depending on tire width) NOTE: Specify Loyal Elevator width and length when ordering. If Loyal Elevator was previously purchased, provide factory with serial number. Loyal transports will not be sold for use with other brand elevators. Return to Index 41 CLEAN-CHUTE COVER WITH STACK Stack Stack Stack Selling Item No. Dia. Height Angle Price CH-COV1110STR 11" 10" Straight $118.45 CH-COV111615D 11" 16" 15 Degree 118.45 CH-COV1316STR 13" 16" Straight 118.45 CH-COV131615D 13" 16" 15 Degree 118.45 Note: Any cover above will fit all straight hopper sizes CLEAN CHUTE K COVER W/STAC DOWNSPOUTS • Use when silage is fed directly from silo clean-chute tube — prevents silage spillover and reduces wind losses NOTE: Requires straight hopper - order separately below STRAIGHT HOPPER • Use when elevator is being fed from two locations ... or when clean-chute cover above HOPPER STRAIGHT is ordered • 4-sided hopper easily snaps on at any point along elevator • Illustrated with 1 flow-thru end. Order with 2 flow-thru ends if hopper installed at location following 1st intake hopper. Item No. * Description Selling Price DS724 DOWNSPOUT (for 7" width elevators) — 24" length .......... $155.40   13757   Extension­—12" length .......................................... 54.40   13759   Extension­—24" Length ......................................... 77.75 DS924 DOWNSPOUT (for 9" width elevators) — 24" length ........... 161.25   13756   Extension­—12" Length ......................................... 56.40   13721   Extension­—24" Length ......................................... 80.60 DS1124 DOWNSPOUT (for 11" width elevators) — 24" length ......... 183.65   13758   Extension­—12" Length ......................................... 64.20   13760   Extension­—24" Length ......................................... 91.90 DS1324 DOWNSPOUT (for 13" width elevators) — 24" length ......... 199.85   13761   Extension­—12" Length ......................................... 70.00   13762   Extension­—24" Length ......................................... 99.90 DIVERTERS • Use when dual direction discharge of feed flow is required • Permits feed to be diverted to a feed cart, second conveyor, alternate feeder or elsewhere • Cable pull permits control from remote location • Diverter quickly attaches to discharge end of elevator • Optional cover for shielding materials from rain and snow NOTE: Use on horizontal conveyors only Selling Price SH7 Straight Hopper (for 7" width elevator) ....................... $100.95 SH9 Straight Hopper (for 9" width elevator) ....................... 115.45 SH11 Straight Hopper (for 11" width elevator) ..................... 129.85 SH13 Straight Hopper (for 13" or 16" width elevator) .......... 137.45 *Item No. is for hopper with 1 flow-thru end. Add “F” to end of Item No.,   if ordered with 2 flow-thru ends (same price) NOTE: If straight hopper is desired, RATHER than sliding incline hopper furnished with elevator — please state on order. • 4-sided downspout controls discharge flow of material • Directs material to where you want it • Reduces wind losses • Attaches directly to discharge end of elevator A price allowance will be granted for cost of sliding incline hopper (see Elevator Parts Price List). STRAIGHT HOPPER SPECIFICATIONS Hopper 7" Width 9" Width 11" Width 13" or 16" Width   Width (top) 24" 24" 24" 24"   Width (bottom) 12-1/2" 14-1/2" 16" 18"   Length 31-1/2" 31-1/2" 31-1/2" 31-1/2"   Height (less stack) 8-3/4" 8-3/4" 8-3/4" 8-3/4" Item No. DV9RL DV11RL DV13RL DV9FB DV11FB DV13FB DVC Selling Price Diverter–right/left (for 9" W elev.)..................... $324.75 Diverter–right/left (for 11” W elev.)................... $324.75 Diverter–right/left (for 13” W elev.)................... $324.75 Diverter–front/back (for 9” W elev.).................. $324.75 Diverter–front/back (for 11” W elev.)................ $324.75 Diverter–front/back (for 13” W elev.)................ $324.75 Cover for Diverter............................................. 37.75 EXTENSIONS • Replace a section... or extend the length of your existing elevator. • Extensions attach to boot end of existing elevator — requires removal of boot and idler shaft and their reattachment to bottom end of extension. • Extension can be welded or bolted to existing elevator. If you choose to bolt on extension — order optional, angle-iron connecting joint below (one connecting joint is welded on extension — one sent along to be welded or bolted to existing elevator). NOTE: When ordering, specify if conveyor chain take-up on existing elevator is on discharge or boot end. Chain, poly wear liner and connecting joint are not included. Order separately if needed. See SPECIFICATION AND ITEM NO. GUIDE below. Selling Price EN__ EN__ EN__ EN__ EN__ J__ Add fabrication charge (Item No. FAB-SE DRIVE) for drive-extensions......................................... each Add fabrication charge (Item No. FAB-SE IDLER) for idler-extensions.......................................... each Extension for 7" width elevator (does not include chain, poly wear liner or connecting joint)......... per foot Extension for 9" width elevator (does not include chain, poly wear liner or connecting joint)......... per foot Extension for 11" width elevator (does not include chain, poly wear liner or connecting joint)....... per foot Extension for 13" width elevator (does not include chain, poly wear liner or connecting joint)....... per foot Extension for 16" width elevator (does not include chain, poly wear liner or connecting joint)....... per foot Connecting joint (specify elevator width)........................................................................................ each $62.00 35.00 32.00 34.00 40.00 46.00 59.95 32.80 SPECIFICATION & ITEM NO. GUIDE FOR CHAIN, POLY LINER & CONNECTING JOINT Chain, poly wear liner & connecting joint are not included with extension. Order separately if needed. See Product Index page (Elevator Replacement Chain and Poly Liner) for additional specifications and price list. Elevator Flight Chain Poly Liner Connecting Joint Width Width Type Item. No. Thickness x Width Item No. Width Item No. ________________________________________________________________________________________________ ________________________________________________________________________________________________ 7" 6-1/2" Detach. DC5565 1/4 x 6-7/8" PL14678 7" J7 ________________________________________________________________________________________________ 9" 8-1/2" Detach. DC6285 1/4 x 8-7/8" PL14878 9" J9 ________________________________________________________________________________________________ 9" 8-1/2" Pintle PC66285 1/4 x 8-7/8" PL14878 9" J9 11" 10" Detach. DC6210 1/4 x 10-7/8" PL141078 11" J11 ________________________________________________________________________________________________ 11" 10" Pintle PC667H10 1/4 x 10-7/8" PL141078 11" J11 ________________________________________________________________________________________________ ________________________________________________________________________________________________ 13" 12" Detach. DISCONTINUED 1/4 x 12-7/8" PL141278 13" J13 ________________________________________________________________________________________________ 13" 12" Pintle PC667H12 1/4 x 12-7/8" PL141278 13" J13 16" 15-1/2" Detach. DISCONTINUED 1/4 x 15-7/8" PL141578 16" J16 ________________________________________________________________________________________________ 16" 15-1/2" Pintle PC667H155 1/4 x 15-7/8" PL141578 16" J16 Return to Index 42 CONVEYOR CHAIN Heavier-gauge steel backing Closer spacing between flights PINTLE CHAIN (with flights) Spacing Flight Flight Back Item Chain Between Unit of Selling No. No. W H T Type W H Ga Flights Measure Price PC66285__ 662 8-1/2" 2-1/2" 1/2" Rubber 5-1/8" 2-1/4" 11 13-1/2" FT $13.80 PC667H10__ 667H 10" 2-1/2" 1/2" Rubber 8-1/4" 2-1/4" 12 13-1/4" FT 12.90 PC667H1058__ 667H 10-5/8" 2-1/2" 1/2" Rubber 8-1/4" 2-1/4" 11 13" FT 12.90 PC667H11__ 667H 11" 2-1/2" 1/2" Rubber 8-1/4" 2-1/4" 10 13-1/2" FT 13.40 PC667H1158__ 667H 11-5/8" 2-1/2" 1/2" Rubber 8-1/4" 2-1/4" 10 13-1/2" FT 13.60 PC667H12__ 667H 12" 2-1/2" 1/2" Rubber 8-1/4" 2-1/4" 12 13-1/4" FT 13.70 PC667H155__ 667H 15-1/2" 3-1/2" 3/8" UHMW Poly 12" 2-3/4" 10 8-3/4" FT 26.20  QUANTITY DISCOUNT   300' or more (mix or match) 10' rolls in stock — for shorter rolls add $12 net per short roll and order Repair-Pin & Clip below (Item No. E667HPC)           Repair Pin & Clip included with 10' rolls. Pintle Chain Coupler (#E662 and #667H) Tear-drop pin Detachable Chain Coupler (#55 and #62) Pin Coupler Clip Repair pin Clip Coupler REPLACEMENT COUPLERS Clip Unit of Measure Item No. Flight Width E55C E62C E662C E662PC E667C E667HPC Chain Coupler (with pin & clip) ............................... EA Chain Coupler (with pin & clip) ............................... EA Chain Coupler (with pins & clips) ............................ EA Repair-Pin & Clip .................................................... EA Chain Coupler (with pins & clips) ............................ EA Repair-Pin & Clip .................................................... EA #55 #62 #662 #662 #667H #667H Heavier-gauge steel backing Selling Price $6.30 8.70 8.40 4.90 9.20 5.50 Closer spacing between flights STEEL DETACHABLE (with flights) Spacing Flight Flight Back Item Chain    Between Unit of Selling No. No. W H T Type W H GA Flights Measure Price DC5565__ 55 6-1/2" 2-1/2" 1/2" Rubber 3-5/16" 1" 11 12-1/2" FT $ 9.50 DC628__ 62 8" 2-1/2" 1/2" Rubber 5-1/8" 1-3/4" 10 12-5/8" FT 11.80 DC6285__ 62 8-1/2" 2-1/2" 1/2" Rubber 5-5/16" 1-5/8" 10 12-1/2" FT 13.10 DC629__ 62 9" 2-1/2" 1/2" Rubber 5-5/16" 1-5/8" 10 12-1/2" FT 13.30 DC6210__ 62 10" 2-1/2" 1/2" Rubber 5-1/4" 1-3/4" 11 12-1/2" FT 14.30  QUANTITY DISCOUNT   300' or more (mix or match) 10' rolls in stock (except DC5565 - 16' rolls stocked) — for shorter rolls add $8 net per short roll Return to Index DETACHABLE DOUBLE-CHAIN (with plastic flights) • For Double-Chain Conveyors • Fits Loyal & Kelly 43 C A Width Overall Spacing Between Outside Between Item Chain Chains Width Flights No. No. A B C W   DDC__ #62 14-1/2" 17-3/4" 11" B FLIGHT Selling H T TYPE U/M Price 14-3/8" 1-1/2" 1/2" Poly FT $16.70   20' rolls in stock — for shorter rolls add $10 per short roll DETACHABLE CHAIN (less flights) 10-Foot Rolls Detachable Length Links Wt. Average Minimal Overall Chain Of In Per Ultimate Tensile Pitch Width Thickness Selling Item No. No. Roll 10 ft. Roll 10 ft. Roll Strength Strength P M T Price ________________________________________________________________________________________________   DC3210 32 10 ft 104 32 lbs. 1650 lbs. 1320 lbs. 1.157 15/16 0.09 $34.10 ________________________________________________________________________________________________   DC5510 55 10 ft 74 62 lbs. 2800 lbs. 2240 lbs. 1.630 1-9/32 0.125 42.70 ________________________________________________________________________________________________   DC6210 62 10 ft 73 90 lbs. 4200 lbs. 3520 lbs. 1.654 1-9/16 0.148 60.00 ________________________________________________________________________________________________   DC67H10 67H 10 ft 52 137 lbs. 5500 lbs. 4400 lbs. 2.313 1-7/8 0.185 81.70 PINTLE CHAIN (less flights) 10-Foot Rolls B Pintle Length Links Wt. Minimum Average Overall Inside Pin Chain Of In Per Tensile Pitch Width Width Dia. Height Thickness Selling ________________________________________________________________________________________________ Item No. No. Roll 10 ft. Roll 10 ft. Roll Strength P B C D H T Price   PC66210 662 10 ft 72 10.5 lbs. 8,500 lbs. 1.664 1-5/8 29/32 0.281 0.720 0.125 $104.20 ________________________________________________________________________________________________   PC667H10 667H 10 ft 52 11.7 lbs. 9,500 lbs. 2.313 1-47/64 1 0.312 0.875 0.125 94.60 DETACHABLE BALE ELEVATOR CHAIN (fully assembled – ready to go) HC55­__ HC62__ HB4-55 HB4-62 No. 55 Steel Detachable Chain with Raised Links (every 24")................ Per Foot* No. 62 Steel Detachable Chain with Raised Links (every 24")................ Per Foot** No. 55 Raised Link Only................................................................................ Each No. 62 Raised Link Only................................................................................ Each *Available in 8', 12', 16', or 24' lengths   **Available in 12' and 24' lengths .7 lbs. 1.0 lbs. .2 lbs. .3 lbs. $6.59 8.54 3.49 5.05 Return to Index 44 CONVEYOR BELTING BELT TOP SURFACES SMOOTH-TOP CRESCENT-TOP PVG BELTING (EXTRA-COLD-TEMPERATURE – 40°) Greater chemical & cracking resistance than PVC Item No. Weight per Running Foot Selling Price QUANTITY DISCOUNT 600' or more of any one size and type CUTTING CHARGE (applied to all orders under 600') ........................................................... $35.00 All belt orders must be emailed or faxed. Specify belt width, length, and type (Crescent or Smooth) to insure accuracy. Belt orders are non-cancelable after we cut to length. BTSMPVG12012__ 12" BTSMPVG12014__ 14" BTSMPVG12016__ 16" BTSMPVG12018__ 18" BTSMPVG12020__ 20" PVG 120 Smooth Conveyor Belting ...........................   .84 lbs. PVG 120 Smooth Conveyor Belting............................    .98 lbs. PVG 120 Smooth Conveyor Belting............................ 1.12 lbs. PVG 120 Smooth Conveyor Belting............................ 1.26 lbs. PVG 120 Smooth Conveyor Belting............................ 1.40 lbs. $ 5.40 6.30 6.95 7.55 8.40 BTCRPVG12012__ 12" BTCRPVG12014__ 14" BTCRPVG12016__ 16" BTCRPVG12018__ 18" BTCRPVG12020__ 20" PVG 120 Crescent Conveyor Belting.......................... 1.08 lbs. PVG 120 Crescent Conveyor Belting.......................... 1.26 lbs. PVG 120 Crescent Conveyor Belting.......................... 1.44 lbs. PVG 120 Crescent Conveyor Belting.......................... 1.62 lbs. PVG 120 Crescent Conveyor Belting.......................... 1.80 lbs. $  6.75 7.80 8.95 10.05 11.15 BELT LACING & TOOLS The Installation Tool (RSC187-6) holds fasteners securely on the belt and in proper INSTALLATION TOOL alignment while guiding staples as they are (RSC187-6) driven. It also provides an anvil surface for initial Illustrated clinching of the staples. Designed for new-style (RS) Ready-Set™ Fastener Hinges — staples have been preinserted in hinge top plate. You can easily convert your traditional C187 Tool by ordering No. ST5-5 Blocks below (see page bottom). INSTALLED LACING Illustrated Selling Item No. Price RE-RSTK4-6 RS300 RSC187-6 RS125SJ12NCS RS125SJ14NCS RS125SJ16NCS RS125SJ18NCS RS125SJ20NCS RS125SJ24NCS NCS1-X 125-RET-50 ST5-5 Rent — Belt-lacing installation-tool-kit (RSTK4-6) — no charge for in-transit days, Sundays, or holidays ............ per day $  25.00 Belt installation illustrated instruction sheet....................................... no charge Tool for #62, #125 & #187 — 6" spliced in one move........................... 426.35 #125 Alligator Fastener Kit* — stainless 12"..................... (4 per box) 157.10 #125 Alligator Fastener Kit* — stainless 14"..................... (4 per box) 191.75 #125 Alligator Fastener Kit* — stainless 16"..................... (4 per box) 222.35 #125 Alligator Fastener Kit* — stainless 18"..................... (4 per box) 249.90 #125 Alligator Fastener Kit* — stainless 20"..................... (4 per box) 265.20 #125 Alligator Fastener Kit* — stainless 24"..................... (4 per box) 332.25 Extra Hinge Pins #125 — stainless (nylon covered)...................... 10' 67.30 Extra Retaining Washer for #125 hinge pin.................... (50 per box) 12.25 Block, RSC187 Lace Tool Ready Set™ Staple Guide — 2"W..... each 27.55 *Includes hinge plates with pre-inserted staples, hinge pins, and washers. NOTE:.Use #125 staples for 100 to 150 P.W.I. (rated strength per inch of width) belt. Return to Index 45 POLY SILO HOPPER SWIVEL HOPPER PUTS MATERIAL WHERE YOU WANT IT — SAVES FEED AND CLEANUP TIME Super-tough, low-cost poly won’t rust or crack — even at extreme temperatures! Directs silage and haylage into conveyor, cart or mixer. Prevents feed losses. Ends problems from flying material. Eliminates feed hang-up on bottom silo rungs and rings, and on electrical equipment. Keeps feed room clean.   The Poly Silo Hopper helps prevent silo chute updrafts of warm, moist, bacterial-laden air from livestock and of feed-dust (which hangs up in silo chute and in the silo, including the unloader). Also helps prevent entry of rodents and insects. Simply pull out like a drawer for easy access into silo chute. Takes only seconds to remove and replace — no attachment to silo chute needed. The bottom 10-1/2" hopper hole can be enlarged to 12" by sawing off hopper bottom. 12" poly extension pipe is also available in 30" slip together lengths.   Deep throat design handles high moisture corn and even haylage with no plugging. Slick, smooth surface for fast discharge. Other fiberglass brands may have a rough, textured, inside surface which slows discharge and can cause plugging. High-strength polyethylene is lightweight and much more durable than steel or fiberglass — used for years in heavy duty applications. Thick walled hopper is extra tough — immune to silage acids — resists heat, cold, sunlight and warpage. 5" Anchor Bolts (furnished) Two rugged steel guide legs provide solid support for hopper. Lag legs to concrete with one piece masonry anchor bolts (3/8"D x 1-7/8"L) equipped with expandable sleeves (furnished). Use masonry bit same diameter as anchors and drill holes 1/4" deeper than anchors. Insert anchors and tap until heads are flush with guide legs. Tighten heads 3 to 4 full turns or until resistance is felt. Or use J-bolts with nuts. Hook J-bolts around silo rings and bolt to guide legs. Leg hole spacing can be varied somewhat to fit different width silo rings by pushing on guide legs. UPS SHIPPABLE Trim with saw to fit snug against silo wall and chute. (Top view) Large – 30" I.D. PSH-S PSH-M PSH-L PSH-1A PSH-18 Optional EXTRA-LONG GUIDE LEGS — use only where bottom of silo chute is high above ground and poly silo hopper can’t be reached. Allows you to climb up to silo hopper, push it away from chute and out over extra-long legs, so chute can be entered. When exiting chute, hopper can be quickly pushed back over chute.   Optional extra-long guide legs must be installed at a level higher than top of operator’s head. Failure to heed may result in eye or head injury. Large – 42" I.D. Medium – 35" I.D. Small – 31" I.D. Medium – 30" I.D. Item No. Exclusive 3-piece design. Connecting ring holds bottom to top — provides for 220° rotation of hopper bottom. Bottom can be quickly swiveled to right or left using two steel handles attached to hopper bottom. Small – 30" I.D. Optional 30"L extension pipe SM MED LG 25-1/2" 28" 32" NOTE: Saw at line to enlarge hole to 12". Standard 10-1/2" hole If necessary, cut out for rub on rib stave chute. Three sizes available to fit most silo chutes: Small, Medium or Large (installation instructions furnished) Approx. Selling Shipping Wt. Price Small Silo Hopper ......................................................................................................... 26 lbs.* $278.00 Medium Silo Hopper...................................................................................................... 28 lbs.* 278.00 Large Silo Hopper ......................................................................................................... 31 lbs.* 299.00 QUANTITY DISCOUNT 2 or more Hoppers Poly Extension Pipe — 12" diameter ....................................................... 30" length    6 lbs.* 32.50 Extra-Long Guide Legs (if purchased with hopper — replaces standard legs)..... pair  14 lbs.*** 102.00 NOTE: Component parts also sold separately — call for pricing. * Shipped as two “oversize” packages ** Shipped as “oversize” package Return to Index 46 POLY CLEAN-CHUTE FUNNEL LOW-COST WAY TO KEEP SILO CHUTE CLEAN! IMPROVED TWIST & LOCK COLLAR • Simple to install in doorway (with clean-chute tube all the way to bottom of silo chute) • Super-tough poly funnel won’t rust or crack — even at extreme temperatures. UV stabilized to resist sunlight • More durable than fiberglass • Smooth and slick — won’t plug • Flange can be easily cut with any wood-type saw to fit your silo door Corner can be easily notched for silo unloader 10" O.D. New twist ’n lock collar — Clean-chute tube secured with stainless clamp — Simply twist and lock collar to funnel — No need to remove tube from collar when changing silo doors UPS SHIPPABLE Item No. PCF Approx. Ship Wt. Poly Clean-Chute Funnel with top and bottom collars with stainless clamps (less clean-chute tube)................................. 15 lbs.* *Shipped as “oversize” package Selling Price New bottom collar with stainless clamp holds tube in place $151.00 CLEAN-CHUTE TUBE Thicker 8 mil. (heavier than lighter 6 mil.), for better rip resistance ... longer life. Fits up to 13" discharge tube. UPS SHIPPABLE    HEAVY-DUTY 8 MIL Approx. Item No. Ship Wt. CC8M17500 Clean-Chute Tube (17" x 500' roll – clear color. Fits up to 11" discharge tube) ............................. per roll  CC8M19500 Clean-Chute Tube (19" x 500' roll – clear color. Fits up to 12" discharge tube) ............................. per roll  CC8M21475 Clean-Chute Tube (21" x 475' roll – clear color. Fits up to 13" discharge tube) ............................. per roll  QUANTITY DISCOUNT 2 to 4 rolls (mix or match) 5 or more (mix or match) Selling Price 57 lbs. $153.00 64 lbs. 165.00 64 lbs. 177.00 Return to Index 47 POLY SILO CHUTE LINER EXTENDS LIFE OF RUSTED-OUT SILO CHUTES Super-Tough, Low-Cost Poly Won’t Rust or Crack — Even at Extreme Temperatures! ROLL • An economical and easy way to repair rusted out silo chutes • Simply unroll and pull up silo for seamless one-piece, economical installation • High-strength polyethylene (pronounced poly-ethel-lean) is lightweight and much more durable than steel or fiberglass • Superior performance has been proven — used for years in heavy-duty industrial applications (meets FDA Regulation 121.2501) • Long-life, high-density poly is non-porous — resists moisture, silage acids, feed additives and other chemicals • Poly liner is extremely tough — resists heat, cold, and warpage. UV stabilized to help withstand sunlight (through holes in old chute) • Slick, smooth surface provides fast feed discharge — prevents feed hangup — silage won’t cling to finish • White poly liner will function for chute skylights ... by cutting 12" square holes in steel chute every 6' EASY TO INSTALL 1) Use a chalkline and strike a center line from the top to the bottom of the chute. 2) Mark the center on both the top and bottom end of each liner. 3) Beginning at the bottom of chute, install first liner. Line up center markings on liner with chalkline on chute. 4) Secure liner to chute using standard 3/4" length self-drilling and tapping, hex-head screws — insert through liner into chute using a screw gun (liner can also be pop-riveted to silo chute). 5) Install screws about every 8" to 10" along both sides of liner. 6) Install remaining liners, lapping joints 1" in direction of feed flow (to prevent feed hangup). 7) Cut top piece of liner, if required, using any standard power or hand saw. UPS SHIPPABLE Item No. Thickness Width Length PCL164848 Poly Silo Chute Liner F752030B Hex-Head Self-Drilling & Tapping Screw Unit of Measure Approx. Ship Wt. Selling Price 1/16" 4' 48' Roll (#10 x 3/4"L) ............................. Box/50 70 lbs. 1 lb. $226.00 13.00 Return to Index 48 LOYAL POLY LINER SMOOTHER & HARDER THAN ORDINARY PLASTIC LINERS Super Slick — Wears Like Mild Steel — Won’t Corrode or Crack ROLL SHEET MANY USES • • • • • • • Mangers Feed bunks Conveyors Auger troughs Gutters Barn-cleaner chute Manure spreaders • • • • • • • Milkhouse & parlor walls Horse box stalls Feed bins & carts Gravity-flow boxes Feeder wagons Dump trucks Snow plows BENEFITS ◆ Makes old mangers, walls and equipment better than new ◆ Extends life of any new surface — protects from chemicals, moisture and wear ◆ Will not harbor bacteria — keeps feed fresher longer. Cows lick smooth surface clean ◆ Glassy-surface prevents freezedown — no material to chip away — reduces chain stretching ... increases chain life ◆ Prevents materials from sticking to rusting metal ◆ Self lubricating — cuts energy consumption by up to 30% ◆ Dampens noise levels — you will notice the difference ◆ Easy to install — cut and drill like wood — use nail-anchors, elevator bolts, sheet-metal or wood screws, or pop rivets to attach to most surfaces ◆ UV stabilized to resist sunlight ◆ Proven performance — used in industry for years ◆ Long life — 20 year accelerated testing showed no noticeable change in physical composition or color Return to Index GENERAL INSTALLATION TIPS 49 (Also refer to specific applications on following pages for additional tips) THICKNESS — 1/8", 3/16" or 1/4"? Depends on the underlying surface condition and whether it’s flat or round ... plus your budget. 1/4" is stiffer and lays flatter — for a “more-level" appearance. 1/8" is more likely to eventually take the shape of any underlying holes and protruding rocks. However, if you fill in the manger holes and rough spots with lime, sand or ready-to-mix concrete, 1/8" will lay almost as level as 1/4", and will probably last as long as you are farming. 1/8" is more pliable, and is easier to install over curved surfaces, such as round/curved mangers and auger trough. However, 1/4" can be made more flexible by “conditioning” it in a very-warm room (such as a heated milkhouse) or in direct sunlight. Unroll liner for quicker heat absorption. After liner has “relaxed,” simply step on it to press liner into your curved/round manger or auger trough. 1/4" is recommended on conveyor and barn-cleaner chain applications up to 30" wide. Because 1/4" will lay flatter, it is less prone to hump and become worn or torn by chain riding over it. 1/8" or 3/16" is recommended in manure-spreader and other chain applications over 30" wide. LENGTH — Rolls vs. sheets are ordered by over 97% of our manger-liner customers ... because rolls are quicker and easier to install. Also, rolls are seamless for easier sweeping (no cracks for moisture or feed to spoil in). Rolls recommended for conveyors up to 13" wide. Install as two pieces if conveyor is longer than 50.' Use 20' pieces for conveyors over 13" wide. WIDTH — Because poly is very slippery (especially when wet), allow space for walkway beside manger liner. 30" provides easier cleanup of feed pushed out toward walkway, plus more floor protection from feed acids. 24" is popular if aisle space is limited, and also with budget buyers. Holddowns will reduce spillage into feed alley by up to 90%. Width of liner should be narrower than conveyor or gutter. The extra side clearance will allow poly to expand lengthwise when warm, without binding against side-walls and humping. Order liner 1/8" narrower up to 13" wide, and 1/4" narrower over 13" wide. If necessary, liner width can be quickly narrowed for your special application, using a table saw. EXPANSION/CONTRACTION—Poly liner will expand as temperature increases and contract as temperature decreases. Do not install poly on a cold day. “Condition” poly and building or equipment at 45° or above (the hotter the better), for 24 hours prior to installation, to minimize expansion. A heated milkhouse or direct sunlight works good (elevate liner off cold floor/ground and unroll for quicker heat absorption). Allow 1/16" of expansion/ contraction per foot (both lengthwise and widthwise — for variations from “average" temperature). If installed when temperatures are below the “annual average,” allow for more expansion than contraction. When temperatures are above the “annual average,” allow for more contraction than expansion. Holes in poly should be drilled up to 1/8" oversize depending on installation temperature. Manger-liner is not lagged down, but is free to expand without pushing against nail anchors and humping (see “POLY HOLDDOWNS” for more information). Conveyor, gutter, and barn cleaner chute liner is fastened only at the intake end of each section of liner, and the sections are overlapped 2" — lag front edge of each bottom section only. For other applications where the liner is fastened at several locations (vs. just at intake end of each section), drill oversize or slotted fastener holes. Do not butt sections of liner tightly together. Instead, provide expansion joint of 1/16" per foot (silicone caulk to prevent moisture and material from seeping under) — on wider joints, some installers will use “shiplap" design. Toll-free: 1-800-472-2341 • Toll-free fax: 1-800-677-2341 • www.loyal-roth.com Return to Index 50 MANGER LINER FLAT MANGERS ROUND MANGERS Recessed holddown Flat holddown Recessed holddown Liner Nylon nail anchors Liner BOX MANGERS CURVED MANGERS Recessed holddown Flat holddowns Flat holddown NOTE: Above installations illustrated with holddowns. However, some budget buyers simply unroll liner over limed manger floor, allowing curved, outside surface of roll to face up toward ceiling. They report that after several days, the weight of the feed sitting on top of the curved-liner surface, plus the pressure of the cows pushing down on liner as they eat, plus the suction created between the limed floor and the underside of the liner, will level liner so its flat. They also note that the edges of the liner bite into the cement, preventing feed from creeping under the liner. BENEFITS • Many farmers claim poly manger liner saves a minimum of 1 lb. of feed per cow per day. If you’re throwing feed away, you need a liner — it can pay for itself in as little as 6 months • Unlike cement; smooth, hard surface won’t absorb moisture or feed  —  helps eliminate bacteria buildup (which causes feed souring, mold and musty odors). Even if water bowls overflow, feed will stay fresher longer. Unlike porous cement, glasslike liner surface doesn’t contain a “starter bed" of bacteria. Helps eliminate fly breeding/feeding • Cows eat and milk more, since feed stays fresher — and because smooth poly doesn’t hurt cows tongues like rough cement and protruding rocks • High-density poly won’t pit and wear like cement — enables cows to lick the feeding surface clean (increases grain consumption of cows that wouldn’t lick feed out of rough, rocky cement) — protects cement floors • Prevents loss of expensive protein, mineral and vitamin additives, which imbed and sour in cement pores and cracks • Cuts cleaning time — ends scraping — sweeps easily with a light pushbroom. Because feed doesn’t sour, cows clean up their feed and a heavy scraper is not needed • Low-cost way to make old mangers better than new • Much less expensive and easier to install than ceramic tile or epoxy resurfacers • Liner can be driven over with cart without cracking INSTALLATION (if holddowns not used, refer to “NOTE” below drawings above) 1. “Condition” poly at 45° or above (the hotter the better), for 24 hours prior to installation, to minimize future expansion. A heated milkhouse or direct sunlight works good. Elevate liner off cold floor/ground and unroll for quicker heat absorption. Weight-down liner to prevent it from rolling back up. Allowing the liner time to “relax” vs. wrestling with a “springy” roll, will save you installation time. 2. Predrill poly holddowns (3/8" holes at 12" intervals, starting 1" from end) 3. Thoroughly clean old feed, dirt and moisture from manger to prevent musty odors 4. If 1/8" liner is used, fill in manger holes and rough spots with ready-to-mix concrete, sand, or lime, to provide flat, underlying support. Many farmers will fill in holes, even if 1/4" liner is used, to prevent water from ponding under liner and possibly creating musty odors, or if liner is to be driven over. Some farmers drill 3/8" to 3/4" holes in low-lying portions of manger floor and under water bowls, straight down to gravel base, to permit drainage (refill holes with sand to aid drainage). 5. Unroll liner and turn over so inside of roll faces up toward ceiling. Position liner in manger so joints, if any, are away from drinking cups and are between cows (you don’t want cows to lick over joints). 6. On flat mangers, mount flat holddown flush over liner as illustrated above and lag holddown to curb, using an 1/4" dia. x 2"L nylon nail anchors (1-1/2"L if cement is sound). See “NYLON NAIL ANCHOR” instructions on next page. Also lag where cement is uneven for a tight fit. Butt ends of holddowns together (because of smaller temperature variations in barn), to prevent feed from accumulating in cracks. Mount recessed holddown over liner. Reposition liner under curb and feed-alley holddowns to allow for expansion/contraction (see “EXPANSION/CONTRACTION” instructions on prior page). Lag same as curb holddown. Return to Index 51 POLY HOLDDOWNS 5/8" 2-3/8" 2" 5/8" 5/8" 3/4" RECESSED HOLDDOWN For mangers — feed-alley side. Keeps feed in manger — reduces spillage into feed-alley by up to 90%. Also used as END HOLDDOWN (at ends of mangers to prevent feed and juices from getting under liner. Can be shaped same as joint holddown.) 3/4" 2-3/8" JOINT HOLDDOWN (Use at joints, if any. Can be shaped to fit round gutter by softening in pail of hot water for 1/2 hour.) FLAT HOLDDOWN (for mangers) If you choose to anchor liner, poly holddowns are recommended for securing liner in mangers and feed bunks, rather than lagging liner directly to floor with nylon nail anchors (especially when 1/8" liner is installed). Holddowns are lagged about every 1' and where cement is uneven, for a tight fit. The liner is not lagged and is free to expand, without pushing on nail anchors and humping. There are no nail anchor heads protruding from liner to interfere with cleaning. Holddowns require fewer nail anchors, cutting installation costs. Holddowns prevent feed from entering and building up underneath liner. Should water pond under liner and possibly create musty odors, the liner can be removed for drying manger, simply by pulling liner out from underneath Unit of Approx. Selling Item No. Type Length Color Measure Ship Wt. Price the holddowns. PH-F10W Flat 10’ white each 4 lbs. $25.00 Holddowns are high-density, long-life polyethylene. Unlike wood, they won’t absorb mois- PH-R1810W Recess – 1/8" 10’ white each 4 lbs. 25.00 ture or feed (which causes bacteria buildup, PH-R1410W Recess – 1/4" 10’ white each 4 lbs. 25.00 PH-J1810W Joint – 1/8" 10’ white each 4 lbs. 31.75 resulting in feed souring and musty odors). PH-J1410W Joint – 1/4" 10’ white each 4 lbs. 31.75 FASTENERS NYLON ANCHOR with zinc-plated, steel nail (generally used with manger liner) Use masonry bit same diameter as anchor (with a hammer drill — available at most rental shops), and drill holes into cement (holes in poly only should be drilled 1/8" oversize). Drill holes 1/4" deeper than anchor, since dust tends to go back into holes. Insert nylon anchor body in hole and tap gently until head of anchor body is set tightly against polyethylene (dip anchor body in liquid soap first to make job easier). With several sharp hammer blows, drive nail into nylon anchor body to expand. The slotted nail head provides for removal of threaded nail and anchor. Item No. Description TAP8204B TAP7204B 1/4" x 2" Nylon Anchor (with zinc-plated steel nail) ..................................... box/100 $25.00 1/4" x 1-1/2" Nylon Anchor (with zinc-plated steel nail) ............................... box/100 23.80 CONVEYOR FASTENER KIT Item No. E709 Selling Price Selling Price Conveyor Liner Fastener Kit (four-countersinking, flathead bolts and locknuts) ........ $9.00 Return to Index 52 CONVEYOR LINER • Super-slick, self-lubricating liner prevents freezedown • Prevents moisture from penetrating surface — reduces chain stretching — increases chain life. • Lowers energy consumption by up to 30% • Makes old conveyors better than new — extends life of new conveyors • Caution: Existing conveyor must be structurally sound to provide adequate underlying support for liner • NOTE: To select width and length, see “GENERAL INSTALLATION TIPS.” INSTALLATION INSTRUCTIONS POLY LINER 2" 1" M 1" AX 1/4" No tch Bevel 3/4" for idle 1" rs pro cke t ELEVATOR PAN Bend pan-lip down to allow for extra height of liner POLY LINER 1. Read “GENERAL INSTALLATION TIPS.” 2. Cut pan liner to length of pan, less 1/16" per foot (up to 2" max), to allow for expansion. 3. Notch liner for idler and drive sprockets. 4. Drill liner and pan on intake end only, per above drawing. 5. Fasten liner to pan (at intake end only), using four-countersinking, flathead bolts and locknuts — order Kit No. E709. 6. Bevel front-edge of liner back 3/4", using a hand grinder or file, so flights don’t catch on liner. 7. Bend (hammer) down intake end of pan as required to allow flight clearance for additional height of liner. IMPORTANT: Check entire length of elevator for adequate side clearance between liner and both sidewalls (1/16" on each side up to 13" wide, 1/8" on each side if over 13" wide). Grind or block-plane if needed, so liner can expand lengthwise without binding and humping. MANURE-SPREADER LINER • Ends freezedown — prevents apron stretching and breaking • No more chipping away of frozen manure • Covers holes in floor • Extends life of your spreader • Use 3/16" on bottom (1/8" on sides if also done) • Easy to install: — Bevel front-edge of liner back 3/4" — Use elevator bolts and fasten every 2" along front-edge only of liner (1" in from front edge) DUMP-TRUCK LINER POLY LINER POLY LINER for non-abrasive applications • Super-slick surface speeds unloading ... decreases driver downtime • Eliminates material hangup — ends shoveling • Allows lower-angle dumping — better weight distribution — reduces chance of tipping • Avoids need for “truck-bumping” or “clutch-popping” • Extends truck-bed life • Use 3/16" • Easy to install — use elevator bolts and fasten every 2" along front-edge only of liner (1" in from front edge) Return to Index 53 GUTTER LINER • Reduces chain stretching, increases chain life, lowers energy consumption up to 30% • Dampens noise — slick surface prevents sticking and absorbs sound • Saves costly gutter-bottom rebuilding if liner installed when chain replaced • 1/4" thickness required. Line gutter bottom only Poly  Liner • 90° corner liner available for 16" or 18" gutter • Some budget buyers use 6-7/8" in 16" gutters or 8-7/8" in 18" gutters vs. full width — they position liner under the chain and part of the flight, with good results • Overlap sections 2", but lag the front end of each bottom section only. Install 1/4" dia. x 1-1/2"L steel drive anchors with counter-sinking flat heads (1-piece expansion bolts). Locate fasteners every 2" along front end, staggering fasteners 1" and 1-1/2" from front edge (for better gripping should cement condition vary). • CAUTION: Run new barn cleaner chain one week before installling poly, or check each flight and grind off rough edges BARN-CLEANER CHUTE LINER • Prevents freezedown — reduces chain stretching — increases chain life. No frozen flights to free-up in winter. • Lowers energy consumption by up to 30% ... dampens noise levels • Makes old chutes better than new — extends life of new chutes • 1/4" thickness required — line bottom • CAUTION: Existing chute must be structurally sound to provide adequate underlying support for liner • Bevel front-edge back 3/4" and lag like “GUTTER LINER” — see above Poly Liner   FEED-BUNK LINER Recessed holddown Joint holddown Liner 2-piece liner installation Extend liner 1-1/2' to 2' into barn to prevent chain-flights from freezing-down in opening NOTE: Installations illustrated with holddowns. However, some budget buyers simply unroll liner over limed feed-bunk floor, allowing curved, outside surface of roll to face up toward ceiling. They report that after several days, the weight of the feed sitting on top of the curved liner surface, plus the pressure of the cows pushing down on the liner as they eat, plus the suction created between the limed floor and the underside of the liner, will level liner so it’s flat. They also note that the edges of the liner bite into the cement, preventing feed from creeping under the liner (on flat installations). Recessed holddown Liner 1-piece liner installation • Protects feeding surface ... eliminates need to chip out and replace cement at regular intervals • Cows will eat more, especially in summer (pitted feed-bunks promote mold and a buildup of spoiled feed) • Makes old feed-bunks better than new — extends life of new bunks • White color — stays about 10° cooler than black outside...cooler on cows tongues • 1/8" or 1/4" can be used (1/4" is stiffer and lays flatter, but is more difficult to bend). If 1/8" is used, fill in feed-bunk holes and rough spots with lime, sand or ready-to-mix concrete, to provide flat underlying support • If poly holddowns used, install like manger liner. First, install joint holddown (if required), then liner, then recessed holddown (see “manger-liner installation” instructions. Because of wider outside temperature changes, however, do not butt ends of poly holddowns together — allow for expansion.) Return to Index 54 POLY PRICE LIST — STOCK SIZES Item No. Stock Width MANGER LINER Stock Length Color Unit of Measure Approx. Ship Wt. Selling Price roll roll sheet roll roll 62 lbs. 124 lbs. 16 lbs. 78 lbs. 155 lbs. $ 280.15 560.30 71.40 363.70 727.40 roll roll roll roll 120 lbs. 240 lbs. 150 lbs. 300 lbs. 547.50 1095.00 609.95 1219.90 70 lbs. 90 lbs. 110 lbs. 129 lbs. $354.90 401.30 570.60 633.10 1/8" PL182450W 24" 50' PL1824100W 24" 100' PL183010W 30" 10' PL183050W 30" 50' PL1830100W 30" 100' white white white white white 1/4" PL142450W 24" 50' PL1424100W 24" 100' PL143050W 30" 50' PL1430100W 30" 100' white white white white CONVEYOR LINER 1/4" PL14678100W 6-7/8" 100' PL14878100W 8-7/8" 100' PL141078100W 10-7/8" 100' PL141278100W 12-7/8" 100' white white white white roll roll roll roll GUTTER AND CHUTE LINER 1/4" PL14153450W 15-3/4" 50' white roll PL141534100W 15-3/4" 100' white roll PL14173450W 17-3/4" 50' white roll PL141734100W 17-3/4" 100' white roll PL90CNR14B 90°     CORNER black each   (for 16" to 18" gutter — trim to fit) 83 lbs. 166 lbs. 89 lbs. 178 lbs. 10 lbs.* $408.45 816.90 462.30 924.60 68.25 FEED-BUNK, MANURE-SPREADER, DUMP-TRUCK & WALL LINER 1/8" PL183650W 36" 50' PL1836100W 36" 100' PL184810W 48" 10' PL184850W 48" 50' PL1848100W 48" 100' white white white white white roll roll sheet roll roll 93 lbs. 186 lbs. 25 lbs. 124 lbs. 248 lbs. $  393.30 786.60 93.80 455.40 910.80 roll roll sheet roll roll 180 lbs. 360 lbs. 48 lbs. 240 lbs. 480 lbs. 687.25 1374.50 167.00 834.90 1669.80 roll 455 lbs. 2166.25 1/4" PL143650W 36" 50' PL1436100W 36" 100' PL144810W 48" 10' PL144850W 48" 50' PL1448100W 48" 100' white white white white white PL3660100W 60" 100' white 3/16" * If shipped by UPS, they invoice as a 70 lb. package plus an out-of-box charge Nonstock Lengths: Conveyor Liner – add $17 NET per cut (or ‘special order’ below) NOTE: Nonstock Widths: Special Orders: 60" Liner - add $20 NET per cut (or ‘special order’ below) Other Liner – cutting not available. Order next larger stock length (or ‘special order’ below) Order next larger stock width & quickly narrow, using table saw Add $25 NET plus incoming freight (allow 10–12 weeks). 50% deposit required. Return to Index 55 VINYL-STRIP DOORS Keeps Heat Inside — Keeps Out Weather, Dust and Flies See Through ... Walk Through ... Drive Through Livestock can go outside to exercise, and then return without drafts from open doors The smoothly-beveled edges will not cut or scratch anything coming in contact with them. Won’t snag, either. • Overlapping, flexible vinyl strips part easily — but just enough to let people, animals, and equipment through — then close automatically • Clear vinyl — for safer, 2-way visibility • Light filters in easily — brightens building interior • Use on any size opening ... from your dog house or milk-room door ... to your feed room, barn or machine shed doors (as high as 14' and up to any width) • Excellent low-temperature flexibility • UV stabilized to prevent yellowing and cracking • Low cost ... quick and simple to install • Low maintenance ... clean occasionally (individual strips can be quickly and inexpensively replaced if ever damaged) • Thicker, heavy-duty vinyl — resists bruising — retains it’s shape • Some budget buyers install vinyl strips to avoid the cost of a permanent door THE “SECRET" OF HOW IT WORKS! Every-other strip is reversed when installed. The strips’ concave-convex curvature will form a good, energysaving thermal seal, but spread apart easily for passage. OVERLAP METHODS PARTIAL OVERLAP    How to select the correct-width strip   and the overlap method FULL OVERLAP NOTE: Narrower, thinner strips with less overlap are easier for people and animals to pass through. Wider, thicker strips with more overlap provide greater resistance in larger openings, and against wind and severe wear. Application: For openings to 8' in height:............................................................................. —  people, animals and push-type carts.......................................................... —  vehicles and power feed carts, or if temperature difference   between adjacent areas............................................................................. —  winds or constant equipment traffic............................................................ For openings from 8' to 14' in height: —  interior applications.................................................................................... —  temperature difference between adjacent areas........................................ —  winds or constant equipment traffic............................................................ Thickness Width Overlap   .080"   8" 1/2   .080" .120"   8" 2/3 12" Full .120" .120" .120" 12" 1/2 12" 2/3 12" Full Return to Index VINYL-STRIP DOORS 56 MOUNTING TIPS • Reverse every-other vinyl strip • Sandwich vinyl strips between two-1x3, 1x4 or 1x6 mount-boards; and bolt, screw, or nail mount-boards together (3" hole spacing, starting 1" from end) • Assembled mount is then attached to interior wall, with bottom of mount located 3" above door molding (use 1/2" dia. fasteners spaced every 12", starting 2" from end) NOTE: Attachment to wall vs. door molding provides better thermal seal at top of door, and reduces risk of tearing strips off mount, or hitting mount. Allow minimum of 18" between objects going through door and bottom of mount — this may require locating bottom of mount further above door molding than the recommended 3" UPS SHIPPABLE   How to FIGURE THE LINEAR FEET OF STRIP REQUIRED TO COVER AN OPENING (A) Overall width = opening width plus 6" on each side for better thermo seal (B) Overall height = floor to top of mount (see “MOUNTING TIPS — Note" above). Strips should not touch floor ... so strips hang straight for good thermal seal ... and to prevent strips from freezing to debris on floor. Strip Overlap Width Method Overall Overlap No. of Overall Width (A) – Conversion Strips Height (B) – x Factor = Required x Ft. = Ft. Total Linear Ft.  8" 1/2 ______________ x 2.25 = ______________ x ______________ = ______________  8" 2/3 ______________ x 2.50 = ______________ x ______________ = ______________ 12" 1/2 ______________ x 1.50 = ______________ x ______________ = ______________ 12" 2/3 ______________ x 1.67 = ______________ x ______________ = ______________ 12" Full ______________ x 2.00 = ______________ x ______________ = ______________ Item No. Description VS8- VS12- Vinyl-Strip –   8" width x  .080" [300' rolls in stock (C)] ...... per linear ft. Vinyl-Strip – 12" width x  .120" [200' rolls in stock (C)] ... per linear ft. (C) Add $10.00 NET per nonstock length (D) Add 4 lbs. for shipping box Approx. Selling Weight Price .30 lbs.(D) $ .99 .69 lbs.(D) 2.40 Return to Index VINYL-STRIP DOORS 57 QUICK-QUOTE CHART VINYL STRIP — .080" THICK x 8" WIDE Vinyl Total Door Size Strip Linear Selling W x H Overlap Ft. Price 3' x 6' 1/2 54 $  53.46 4' x 6' 1/2 72 71.28 5' x 6' 1/2 84 83.16 6' x 6' 1/2 96 95.04 VINYL STRIP — .080" THICK x 8" WIDE 3' x 7' 1/2 63 62.37 4' x 7' 1/2 84 83.16 5' x 7' 1/2 98 97.02 6' x 7' 1/2 112 110.88 VINYL STRIP — .080" THICK x 8" WIDE 4' x 8' 1/2 96 95.04 5' x 8' 1/2 112 110.88 6' x 8' 1/2 128 126.72 8' x 8' 1/2 168 166.32 10' x 8' 1/2 200 198.00 12' x 8' 1/2 240 237.60 14' x 8' 1/2 272 269.28 VINYL STRIP — .080" THICK x 8" WIDE 3' x 6' 2/3 60 59.40 4' x 6' 2/3 78 77.22 5' x 6' 2/3 90 89.10 6' x 6' 2/3 108 106.92 VINYL STRIP — .080" THICK x 8" WIDE 3' x 7' 2/3 70 69.30 4' x 7' 2/3 91 90.09 5' x 7' 2/3 105 103.95 6' x 7' 2/3 126 124.74 VINYL STRIP — .080" THICK x 8" WIDE 4' x 8' 2/3 104 102.96 5' x 8' 2/3 120 118.80 6' x 8' 2/3 144 142.56 8' x 8' 2/3 184 182.16 10' x 8' 2/3 224 221.76 12' x 8' 2/3 264 261.36 14' x 8' 2/3 304 300.96 VINYL STRIP — .120" THICK x 12" WIDE 6' x 10' 1/2 110 264.00 8' x 10' 1/2 140 336.00 10' x 10' 1/2 170 408.00 12' x 10' 1/2 200 480.00 14' x 10' 1/2 230 552.00 16' x 10' 1/2 260 624.00 18' x 10' 1/2 290 696.00 20' x 10' 1/2 320 768.00 22' x 10' 1/2 350 840.00 26' x 10' 1/2 410 984.00 Add $10 NET per nonstock length. VINYL STRIP — .120" THICK x 12" WIDE Vinyl Total Door Size Strip Linear Selling W x H Overlap Ft. Price 4' x 12' 1/2 96 $  230.40 6' x 12' 1/2 132 316.80 8' x 12' 1/2 168 403.20 10' x 12' 1/2 204 489.60 12' x 12' 1/2 240 576.00 14' x 12' 1/2 276 662.40 16' x 12' 1/2 312 748.80 18' x 12' 1/2 348 835.20 20' x 12' 1/2 384 921.60 22' x 12' 1/2 420 1,008.00 24' x 12' 1/2 456 1,094.40 26' x 12' 1/2 492 1,180.80 VINYL STRIP — .120" THICK x 12" WIDE 4' x 14' 1/2 112 268.80 6' x 14' 1/2 154 369.60 8' x 14' 1/2 196 470.40 10' x 14' 1/2 238 571.20 12' x 14' 1/2 280 672.00 14' x 14' 1/2 322 772.80 16' x 14' 1/2 364 873.60 18' x 14' 1/2 406 974.40 20' x 14' 1/2 448 1,075.20 22' x 14' 1/2 490 1,176.00 24' x 14' 1/2 532 1,276.80 26' x 14' 1/2 574 1,377.60 VINYL STRIP — .120" THICK x 12" WIDE 4' x 10' 2/3 90 216.00 6' x 10' 2/3 120 288.00 8' x 10' 2/3 160 384.00 10' x 10' 2/3 190 456.00 12' x 10' 2/3 220 528.00 14' x 10' 2/3 260 624.00 16' x 10' 2/3 290 696.00 18' x 10' 2/3 320 768.00 20' x 10' 2/3 360 864.00 22' x 10' 2/3 390 936.00 24' x 10' 2/3 420 1,008.00 26' x 10' 2/3 460 1,104.00 VINYL STRIP — .120" THICK x 12" WIDE 4' x 12' 2/3 108 259.20 6' x 12' 2/3 144 345.60 8' x 12' 2/3 192 460.80 10' x 12' 2/3 228 547.20 12' x 12' 2/3 264 633.60 14' x 12' 2/3 312 748.80 16' x 12' 2/3 348 835.20 18' x 12' 2/3 384 921.60 20' x 12' 2/3 432 1,036.80 22' x 12' 2/3 468 1,123.20 24' x 12' 2/3 504 1,209.60 26' x 12' 2/3 552 1,324.80 VINYL STRIP — .120" THICK x 12" WIDE Vinyl Total Door Size Strip Linear Selling W x H Overlap Ft. Price 4' x 14' 2/3 126 $  302.40 6' x 14' 2/3 168 403.20 8' x 14' 2/3 224 537.60 10' x 14' 2/3 266 638.40 12' x 14' 2/3 308 739.20 14' x 14' 2/3 364 873.60 16' x 14' 2/3 406 974.40 18' x 14' 2/3 448 1,075.20 20' x 14' 2/3 504 1,209.60 22' x 14' 2/3 546 1,310.40 24' x 14' 2/3 588 1,411.20 26' x 14' 2/3 644 1,545.60 VINYL STRIP — .120" THICK x 12" WIDE 4' x 10' Full 100 240.00 6' x 10' Full 140 336.00 8' x 10' Full 180 432.00 10' x 10' Full 220 528.00 12' x 10' Full 260 624.00 14' x 10' Full 300 720.00 16' x 10' Full 340 816.00 18' x 10' Full 380 912.00 20' x 10' Full 420 1,008.00 22' x 10' Full 460 1,104.00 24' x 10' Full 500 1,200.00 26' x 10' Full 540 1,296.00 VINYL STRIP — .120" THICK x 12" WIDE 4' x 12' Full 120 288.00 6' x 12' Full 168 403.20 8' x 12' Full 216 518.40 10' x 12' Full 264 633.60 12' x 12' Full 312 748.80 14' x 12' Full 360 864.00 16' x 12' Full 408 979.20 18' x 12' Full 456 1,094.40 20' x 12' Full 504 1,209.60 22' x 12' Full 552 1,324.80 24' x 12' Full 600 1,440.00 26' x 12' Full 648 1,555.20 VINYL STRIP — .120" THICK x 12" WIDE 4' x 14' Full 140 336.00 6' x 14' Full 196 470.40 8' x 14' Full 252 604.80 10' x 14' Full 308 739.20 12' x 14' Full 364 873.60 14' x 14' Full 420 1,008.00 16' x 14' Full 476 1,142.40 18' x 14' Full 532 1,276.80 20' x 14' Full 588 1,411.20 22' x 14' Full 644 1,545.60 24' x 14' Full 700 1,680.00 26' x 14' Full 756 1,814.40 Return to Index 58 LOYAL POLY-TUF® FEED CARTS SUPER-TOUGH, LOW-COST POLYETHYLENE CART WON’T ROT, PIT, RUST, DENT, PUNCTURE OR CRACK — EVEN AT EXTREME TEMPERATURES! 11 Bushel 20 Bushel 26 Bushel 14 Bushel 7 Bushel NOTE: Bushel capacity rating of Loyal carts is based on a level load. Many other brands require a heaping load to obtain their rated capacity. • High-strength polyethylene (pronounced poly-ethel-lean) is lightweight and much more durable than plywood, steel or fiberglass • Superior performance has been proven — used for years in heavy-duty industrial applications (meets FDA Regulation 121.2501) • Long-life, high-density, food-grade polyethylene is non-porous — resists moisture, silage acids, feed additives and other chemicals • Extremely tough — resists heat, cold, sunlight and warpage. Excellent stress cracking and puncture resistance — even at extreme temperatures • Thick-walled, seamless one piece hopper is extra strong and leakproof — no corners or seams for feed or bacteria to harbor within • Ribbed construction adds even more strength and rigidity to sides • Easier to sanitize — slick, smooth surface both inside and out, wipes or washes clean in minutes • Special rounded bottom design for faster unloading and dumping. No sharp corners or seams to catch forks, shovels or scoops • Rugged, all-welded, bolt-on, steel frame for solid support. Powder coated for corrosion resistance. • Wheel brackets attach to frame, not to hopper, to prevent stress on and breakage of hopper • Rust-resistant, stainless steel truss head bolts and fender washers are used for attaching hopper to frame • Roll smoother on big semi-pneumatic or air tires with grease fittings. Heavy-duty roller bearings, not lighter ball bearings, used on all air-tire carts • Carts quickly turn in a stationary circle on large, rugged swivels with grease fittings • Quieter operation — rounded polyethylene edges prevent damage to your doors, stalls and walls — reduce noise • 7 and 11 bushel capacity carts are ideal for narrow alleys or sharp turns where larger carts are unusable (With semi-pneumatic tires) Maximum Item Bushel Number Capacity* P7-4W   7 Bu. P11-4W 11 Bu. UNASSEMBLED Overall No. of Size Wheels Swivel Tire(s) / Rear Tires / L x W x H ** Bearing Bearing 40 x 22 x 35" 4 8" x 2.50 B.B.   8" x 2.50 B.B. 44 x 27 x 35" 4 8" x 2.50 B.B.   8" x 2.50 B.B. Approx. Shipping Weight 65 lbs. 70 lbs. Selling Price $320.00 347.00 (With air tires — 2-ply tube, recommended for rough, uneven floors and for heavy loads) P7A-4W   7 Bu. 400 lbs. 40 x 22 x 35" 4  8" x 2.50 R.B. 10" x 3.50 R.B. P11A-4W 11 Bu. 600 lbs. 44 x 27 x 35" 4 10" x 3.50 R.B. 10" x 3.50 R.B. P14A-4W 14 Bu. 800 lbs. 44 x 32 x 36" 4 10" x 3.50 R.B. 10" x 3.50 R.B. P14A-4W-N 14 Bu. 800 lbs. 65 x 27 x 41" 4 10" x 3.50 R.B. 10" x 3.50 R.B. P20A-4W 20 Bu. 1000 lbs.  65 x 32 x 41" 4 10" x 3.50 R.B. 10" x 3.50 R.B. P26A-4W 26 Bu. 1200 lbs.  72 x 35 x 41" 4 10" x 3.50 R.B. 10" x 3.50 R.B. 70 lbs. 77 lbs. 87 lbs. 99 lbs. 104 lbs. 119 lbs. $398.00 439.00 510.00 510.00 530.00 590.00 Maximum Load Rating* 400 lbs. 600 lbs. * Do not exceed the lower of maximum bushel capacity or load rating (cart’s bushel capacity will decrease as pounds per bushel of material being conveyed increases.) Operator should never load cart with more weight than can be safely handled. ** Four-wheeled carts are required for use over rough, uneven floors and for greater stability in moving heavier loads. Return to Index 59 LOYAL POLY-TUF® 24" WHEEL CARTS Super-tough, thick polyethylene liner won’t rust or crack — even at extreme temperatures • • • • • Rolls easier than a smaller wheel over hay, uneven floors, through mud and snow — especially with heavy loads Ideal for women — much easier to push Big, heavy duty air tires (tube-type) Rugged 24" x 2-1/8" greaseable wheels ... four times stronger than bicycle wheels Thicker 3/8" dia., solid, welded spokes ... won’t rust off or bend from animal contact, unlike lighter, wire spokes. Powder coated for corrosion resistance. • Larger 1" dia., solid, cold-drawn axles ( With air swivel tire — 2-ply with tube) Maximum Maximum Item Bushel Load Number Capacity* Rating* PHW7A-3W   7 Bu. 400 lbs. PHW11A-3W 11 Bu. 500 lbs. PHW14A-3W 14 Bu. 600 lbs. PHW14A-4W-N 14 Bu. 600 lbs. PHW20A-4W 20 Bu. 800 lbs. PHW26A-4W 26 Bu. 800 lbs. Overall No. of Size Wheels Swivel Tire(s) / L x W x H ** Bearing 40 x 27 x 36" 3 10" x 3.50 R.B. 44 x 32 x 36" 3 10" x 3.50 R.B. 44 x 39 x 36" 3 10" x 3.50 R.B. 65 x 32 x 41" 4 10" x 3.50 R.B. 65 x 36 x 41" 4 10" x 3.50 R.B. 72 x 39 x 41" 4 10" x 3.50 R.B. Approx. Shipping Weight 69 lbs. 76 lbs. 81 lbs. 104 lbs. 111 lbs. 125 lbs. Selling Price $413.00 440.00 520.00 580.00 605.00 640.00 * Do not exceed the lower of maximum bushel capacity or load rating (cart’s bushel capacity will decrease as pounds per bushel of material being conveyed increases.) Operator should never load cart with more weight than can be safely handled. ** Four-wheeled carts are required for use over rough, uneven floors and for greater stability in moving heavier loads. LOYAL CART REPLACEMENT PARTS Item No. Wheel Size HEAVY WH115 -PLAS CTR  8" x 2.50 WH121 8" x 2.50 WH137 10" x 2.75 WH140 10" x 3.50 WH145 10" x 3.50 W110 10" x 3.50 W210 10" x 3.50 WH160 24" x 2.125 W170 24" x 2.125 W270 24" x 2.125 W375 24" x 2.125 WH180 400 x 800 WH220 WH250 WH270 W620 W640 W660 UNASSEMBLED DUTY WHEELS Approx. Shipping Selling Weight Price 5/8" Semi-pneumatic w/ball bearing & polypropylene rim (hub width = 2-1/2")............ 4 lbs. $27.15 5/8" Heavy duty air wheel w/tube and roller bearing (hub width = 3-1/4").... complete 4 lbs. 48.70 5/8" Semi-pneumatic w/ball bearing & polypropylene rim (hub width = 3-1/4")............ 7 lbs. 37.00 5/8" Heavy duty air wheel w/tube & roller bearing (hub width = 3-1/4")........ complete  5 lbs. 48.70 5/8" Heavy duty air wheel w/tube & roller bearing (hub width = 4-1/2")........ complete  5 lbs. 48.70 Air tire only.......................................................................................................................... 3 lbs. 27.00 Air tube only........................................................................................................................ 1 lbs. 14.00 1" Welded spoke air wheel w/tube and grease zerk (hub width = 4").......... complete  10 lbs. 105.00 Air tire only.......................................................................................................................... 2 lbs. 18.00 Air tube only........................................................................................................................ 1 lbs. 13.05 1" Air wheel rim only........................................................................................................... 7 lbs. 80.00 1" Wheelbarrow wheel, heavy duty air w/tube & low-speed roller bearing... complete  6 lbs. 37.75 SWIVELS AND CASTERS Swivel and 8" x 2.50 ball bearing, semi-pneumatic wheel (hub width = 2-1/2").............. complete 9 lbs. $61.65 Swivel and 10" x 2.75 ball bearing, semi-pneumatic wheel (hub width = 3-1/4")............ complete 12 lbs. 71.60 Swivel and heavy duty 10" x 3.50" air wheel (hub width = 4-1/2").................................... complete 9 lbs. 83.55 Swivel with bolts – fits wheel no. WH115-PLAS CTR (hub width = 2-1/2")....................................... 4 lbs. 35.30 Swivel with bolts – fits wheel nos. WH137, WH121 & WH140 (hub width = 3-1/4").......................... 5 lbs. 37.10 Swivel with bolts – fits wheel no. WH145 (hub width = 4-1/2")........................................................... 5 lbs. 37.10 REPLACEMENT LINERS FOR LOYAL POLY-TUF CARTS RLP7   7 bu. Poly-Tuf replacement liner (41" L x 16" BW x 21-3/4" TW x 23-1/2" H) .................................. 23 lbs. $183.55 RLP11 11 bu. Poly-Tuf replacement liner (44-3/4" L x 21-1/2" BW x 28-1/2" TW x 23-3/4" H) ....................... 28 lbs. 193.05 RLP14 14 bu. Poly-Tuf replacement liner (44-3/4" L x 27" BW x 33-1/2" TW x 23-3/4" H).............................. 35 lbs. 245.15 RLP14-N 14 bu. Poly-Tuf replacement liner (63-1/2" L x 21-1/2" BW x 28" TW x 28-1/2" H) ............................. 41 lbs. 249.25 RLP20 18 or 20 bu. Poly-Tuf replacement liner (65-1/4" L x 24" BW x 33-3/4" TW x 28" H) .......................... 46 lbs. 259.55 RLP26 26 bu. Poly-Tuf replacement liner (73" L x 27-1/4" BW x 35" TW x 28-1/4" H) .................................... 57 lbs. 342.55 Adaptor kit – allows you to place Poly-Tuf replacement liner on your existing galvanized or fiberglass ‘Loyal Dorchester’ cart. To convert, saw off vertical angle iron frame on ‘Loyal Dorchester’ cart and bolt or weld adaptor base to bottom frame of existing cart RLPA714     For 7, 11 & 14 bu. (except 14 bu. narrow) Poly-Tuf replacement liners................... 7 lbs. 16.95 RLPA20     For 20 bu. and 14 bu. narrow Poly-Tuf replacement liners....................................... 10 lbs. 16.95 RLPA26     For 26 bu. Poly-Tuf replacement liners....................................................................... 11 lbs. 16.95 Return to Index LOYAL POLY FOOTBATHS 60 Helps Prevent Hoof-Rot and Heel-Erosion — Reduces Lameness w Ne ger Lar allon G 95- Size pre Help ven s wa t ha rts iry No wood frame needed — self-supporting. Cross-rib, safety-grip bottom opens hooves wider ... for better penetration ... faster healing • • • Quick and easy way to clean and disinfect cattle’s feet Washing action of footbath removes damaging material from feet — helps prevent buildup of dirt and manure between cleats, where harmful bacteria tends to harbor Disinfectant solution (copper sulfate mixed with water), kills or inhibits bacterial infections such as hairy-warts, foot-rot and heel erosion — penetrates up between toes and cracks (where bacteria inflames the soft skin) ... then penetrates under the horn lining and inner surfaces of each cleat • Disinfectant solution hardens the horn and toughens the skin in vital areas between cleats of the hoof. This drying effect on hoof and skin makes cattle’s feet more resistant to bacterial infection • High-density, black, all poly — won’t rust, rot, puncture or crack, even at extreme temperatures • Thick-walled, seamless, one-piece units are extra-strong and leak proof Item No. Description Floor Ribs - Height FB3278 32" x 78" x 6" Poly Footbath (self-supporting) ......... 1/2" FB5484 54" x 84" x 6" Poly Footbath (self-supporting) ......... 1"   QUANTITY DISCOUNT   2 or more Footbaths NOTE: Approx. Gallons 40 gal.  95 gal.  Approx. Shipping Weight Selling Price 46 lbs. 65 lbs. $195.70 282.00 Use of two footbaths is recommended by most vets, the first for a water rinse and the second for disinfectant solution. The separate water rinse keeps disinfectant solution cleaner, longer. TIPS ON HOW TO USE YOUR FOOTBATH Footbathing after milking is preferred, since chemicals tracked inside will corrode metals. Locate footbath by exit door of stall barn, or in exit lane of milking parlor, so cows walk through it twice a day. Cows should leave footbath onto a dry, firm surface. Walking cows over a thin bed of lime after the footbath is also very beneficial. The lime acts as a backup to the footbath in keeping the skin over the heel areas hard and dry, and provides good footing. TIP: If your cows initially try to walk around or jump over footbath, fill it with hay. Gradually remove the hay over the next several days, until your cows are used to walking through the footbath. Position so cows can not walk around it – close doors as needed. Fill footbath with a 2-1/2% to 5% copper sulfate solution. Do not use concentrations greater than 5%, as they can harm skin on a cow’s feet or may splash up on a cow’s teats. Once existing foot problems have been reduced, cut solution percentage to 3% or 2-1/2%. The footbath solution should be 3-1/2" to 6" deep. It should be emptied and cleaned thoroughly once a week, more often if it becomes diluted with waste (the strength of the solution will decrease during use, but copper sulfate is not quickly inactivated by manure. The appearance of the solution does not necessarily reflect its effectiveness). Most vets claim that the emptied solution should not cause contamination problems if it is added to barn manure waste. Regular use of a footbath as a preventative treatment is very important. Use of a footbath only after the outbreak of clinical disease is not generally effective. Most vets recommend using footbath with disinfectant solution two times a day for at least two days per week. During the remainder of each week, they recommend filling footbath daily with clean water so cows can walk through it at each milking. Return to Index 61 LOYAL GUTTER GRATES Grate rod spacing — 2" center to center 5/8" grate rod Cross rod spacing — 16" center to center 3/4" grate rod 1/4" x 1-3/4" side angle (Top view) Keep Your Cows and Bedding Clean! • Keeps cows out of gutter and their tails drier, protects legs and udders • Saves on bedding — keeps bedding out of slurry • Provides for more sanitary milking • Ideal for problem and freshening cows. 4' grates can be moved around barn to where needed • Rugged but simple construction — quality crafted by our skilled MIG welders for years of dependable, hard use • Rigid 5/8" structural steel grate rods — round grate rods used (not angle-iron) for better manure drop-through and for longer life • Sturdy 3/4" cross rods — spaced at 16" intervals to prevent grates from bowing. Some so-called “bargain grates” have fewer cross rods • Side angles are thicker for longer life ... wider to adjust to differences in your gutter width (short side angles allow liquids to drain into gutter) • Built on jigs — grate rods are consistently spaced. Permits our scraper to work smoothly and rapidly (Some so-called “bargain grates” may actually cost you more in the long run because of extra cleaning time.) • Our grate rod spacing preferred for cows. Some so-called “bargain grates” have fewer rods. This can significantly increase chance of a valuable cow catching its hoof between rods and injuring hoof and leg. Our spacing still permits most manure to pass through (straw must be chopped short to go through grates) • 5/8" grate rods provide less danger of cows’ hooves slipping through rods, than do 3/4" rods with identical 1-3/8" spacing between rods. 5/8" rods easier on cows’ hooves than 3/4" rods, because 5/8" rods have less radius and rod centers are closer (2" vs. 2-1/8") • Grates made with 1/8" to 1/4" side clearance • Unpainted steel finish Flat grate For Gutter Type Width 16" Flat 16" 2" Raise 16" 3" Raise 18" Flat 18" 2" Raise 18" 3" Raise No. of Grate Rods 7 8 8 8 9 9 Per 4' Grate (4-cross rods) Item Approx. Selling No. Weight Price GG164F 45 lbs. $  88.00 GG164R2 50 lbs. 101.50 GG164R3 51 lbs. 95.50 GG184F 52 lbs. 92.00 GG184R2 56 lbs. 106.00 GG184R3 57 lbs. 100.00 (Gutter should be 8" or more deep) (Side view) Raised grate LOYAL GRATE SCRAPER Clean Grates Faster and Easier! (Side view) • Specially designed to effectively clean our grates (which are constructed on jigs so rods are consistently spaced) • Works best when grates are cleaned frequently • Rake-type unit takes off dry buildup • Notched heavy-gauge steel bottom slips over grate rods • Sturdy steel handle for easy pushing ... rubber grip handle • Available for different width grates Item Selling No. Description Price GS__ Loyal Grate Scraper (specify number of grate rods and width of Loyal grate when ordering) For 2" center-to-center spacing only ........................... $40.00 Return to Index POLY SCRAPERS 62 UHMW-POLY BARN SCRAPERS Extra-Wide to Save Time! UHMW-Poly Outwears Steel Weighs Less – Pushes Easier POLY STALL SCRAPER Works Better Than a Pitchfork! Repositions Bedding ... Cleans Stalls. Soft-plastic grip • Cleans under and behind cows ... turns over bedding • Protects kicking cows against injury from pitchfork Sturdy, brite-plated steel handle (1-1/4" dia. x 18 ga.) Same tough UHMW as used on plow moldboards Reversible blade   (approx.   1/4" thick) 1/8" galvanized braces provide rigid 3-point support. Keeps blade aligned with handle for closer     scraping ... makes       blade firmer Thicker, lacquered wood handle (1-1/4" dia. x 60" L) Wears sharp 24" WIDTH • • • • • • • • • Special deep-ribbed blade securely holds handle ... provides rigid brace ... prevents blade from tilting 30 or 48" WIDTH High-strength poly is lighter and more durable than steel Poly’s superior performance has been proven — used for years 10" width (approx. 3/16" thick) in heavy-duty industrial applications Life-long poly is non-porous — resists moisture, manure acids, feed additives and other chemicals Extremely tough — resists heat, cold, sunlight and warpage. Excellent stress cracking and puncture resistance — even at extreme temperatures Slick, smooth surface helps prevent the dry-manure hangup common with steel blades ... and the timeconsuming chiseling to remove it Poly is quieter — no steel-clatter noise to disturb cows Poly has more flex than steel — less likely to catch on protruding stones and jolt operator Oversize, lightweight 8" x 30" blade is a real work-saver for cleaning floors and walkways Ideal for snow ... slickery, non-porous surface helps prevent snow from sticking to blade ... rolls right off! UPS SHIPPABLE Approx. Shipping Item No. Description Weight Selling Price S10 Poly Stall Scraper – 10" width............................................................... S24 24" Poly Barn Scraper ..................................................................... S30 30" Poly Barn Scraper ..................................................................... S48 48" Poly Barn Scraper ..................................................................... 3 lbs. 6 lbs. 7 lbs. 8 lbs. $24.40 42.45 49.90 66.95 Replacement 10" Poly Blade (less hardware) ...................................... Replacement 24" Poly Blade (less hardware) ...................................... Replacement 30" Poly Blade (less hardware) ...................................... Replacement 48" Poly Blade (less hardware) ...................................... Replacement Handle (less hardware) – fits 10" scraper ........................ Replacement Handle (less hardware) – fits 24" , 30" or 48" scraper .... Hardware Kit (fasteners and braces) – fits 24" , 30" or 48" scraper ...... 1 lb. 2 lbs. 3 lbs. 4 lbs. 2 lbs. 2 lbs. 2 lbs. 13.60 22.90 26.50 45.95 14.30 16.55 9.60 SP10A SP24A SP30A SP48A SP10B SP24B SP24C Return to Index 63 LOYAL BARN LIMER n to ier r-actio s a E eve ols te l contr a r e p o andle -gate h side Takes Only Half the Lime and a Tenth the Time! • 65 lb. capacity hopper — will lime average 120' barn • One trip up-and-down 8' walkway will completely cover it • Large, rugged cast-iron drive sprockets — no plastic sprockets to strip or corrode • Large 10" spreading disc spreads evenly — prevents excessive dusting • Ends sweeping after liming • Slide-gate control on hopper easily adjusts to regulate rate of flow • Heavy-gauge steel hopper — tapered for full feedout • Heavy-steel rotating agitator — no wire nor plastic agitators to twist, bend or break • Heavy-gauge square-tube handle. 70% more flexural strength than comparable round tube. Hopper reinforced with thick plate across full width of hopper where handle attaches • Rolls smoothly on two 8" x 1.75 semi-pneumatic tires • Easy to push — equipped with E-Z grip handle • Grease-zerk fittings on spreader shaft and on drive axle for longer life • Bright-red enamel finish — powder coated for corrosion resistance PROVEN OVER 59 YEARS TO BE THE BEST! UPS SHIPPABLE Item No. Description BL65 Loyal No. 65 Barn Limer .................................................................... REPLACEMENT PARTS AND ACCESSORIES WH110 One loose wheel (8" x 1.75 semi-pneumatic) ..................................... BLP5 One drive wheel (8" x 1.75 semi-pneumatic)   with drive axle ................................................................................. BLP20 Large cast-sprocket for drive axle ................................................... BLP25 Small cast-sprocket for spreader shaft ........................................... BLP45 Agitator, standard length.................................................................... Approx. Shipping Selling Weight Price 37 lbs. $239.00 3 lbs. 15.75 4 lbs. 3 lbs. 1 lb. 1 lb. 26.25 19.95 14.70 10.50 Return to Index 64 HAYRITE BALE HANDLING SYSTEMS • Better engineering • Stronger construction • Smoother, more dependable operation • Wider choice of accessories • Lower cost Exclusive return-chain guide design Heavier, more dependable returnchain guides. Specially-engineered and field proven to eliminate mechanical headaches common with return guides on other brand elevators — prevents sagging, catching, twisting and stretching — increases chain life. Special conveyor-chain track — stronger connecting joints Conveyor-chain track has exclusive double-formed-bend design for extra rigidity. Prevents the sagging and bending common with other singleformed-bend tracks. Heavier, angle-iron connecting joints (1-1/4" x 1-1/4") and hardened bolts prevent stretching — joints are quicker and easier to connect. Strongest structural design available.  GOT A QUESTION?  Our skilled staff has the proven know-how acquired from thousands of barn installations. We can draw on our many years of experience to answer your technical questions. We’ll help you select the most effective — most economical bale handling system. Return to Index HAYRITE BALE HANDLING SYSTEMS 65 Foot for Foot, Pound for Pound ... More Strength, More Quality, More Value for Your Dollar! Begin with the basic elevator ... and custom make a bale handling system to fit your specific needs ... all at a surprisingly low cost! Bolts up to Miller, Smalley & Snowco Brands Basic elevator includes a drive unit, plus an end section with sprocket and chain tightener. Basic elevator can be easily lengthened by adding inter-changeable long and short center extensions. A complete line of accessories are available to make storing bales a smooth, quick and simple one-man operation. COMPONENT LENGTHS Model Basic Extensions Description Unit Safety shields removed for display purposes only Extra Heavy-Duty 18' 12' or 6' Standard 16'  8' or 4' (Extra Heavy-Duty model illustrated) (Standard model illustrated) Order motor and motor pulley separately Model Description Extra Standard Heavy Duty Hayrite Gives You Stronger Construction — Better Engineering! • High-strength 1" square tubing — 70% more flexural strength than comparable round tubing • Heavier design — use as inclined conveyor, mow conveyor or both ✔ ✔ ✔ ✔ • Thick-walled 18 ga. steel construction • Thicker-walled 15 ga. steel construction ✔ • ‘Bridge truss’ side reinforcements along full length of elevator prevent sagging, bowing, twisting and bending. Inclined elevators are self supporting up to 54' ✔ • Higher side rails allow bales to sit down deep in elevator (preventing irregular shaped bales from tumbling out) ✔ • Extra heavy-duty No. 62 conveyor chain equipped with raised links every 24" for more positive movement ✔ ✔ • Heavy-duty No. 55 conveyor chain with raised links every 24" for more positive movement ✔ • Bronze pillow-block bearings on drive unit — self-aligning with grease zerks ✔ ✔ • Full 1" solid head and jack shafts ✔ ✔ • Permanently-lubricated, sealed ball-bearing idler sprockets ✔ • Greaseable, bronze-bushing idler sprockets ✔ • Stronger No. 40 roller-chain final drive ✔ ✔ • All electrically wire-welded construction; welds go all the way around seams for added strength ✔ ✔ • Sturdy, universal motor mount for electric motors is adjustable for leveling, belt take-up and “stop and go” operation. Mount is quickly detachable for inside storage of motor (drive belt included) ✔ ✔ • Powder-coated bright-red finish... for longer life ✔ ✔ Return to Index 66 OPERATING HEIGHTS & GENERAL DIMENSIONS Safety cable removed for display purposes only TOWING ANGLE 30° ANGLE 35° ANGLE 40° ANGLE 45° ANGLE TRANSPORT AXLE WIDTH (From center of tire to center of tire — outside width will vary depending on tire width) Return to Index We   in ig h t a   & cludi t Hitc Ba ng M h, le C o t hu or te Le g Ele   Tr vator a ns E p o n d to rt M ou nt Wh   El eel to eva to r En d ver han a to Ele v ran c Cle a Fre e rO e e ran c Cle a Ea ve l to Wh ee Re ac h Wa ll He ig ha r ge Dis c Ele v a to rL eng th ht g 67 A B C D E F G H I J K TOWING ANGLE — Model HST-10T  Transport 20'  7' 7" 18' 11"  6' 10"  0' 10" 6' 3"  1' 5" 12' 1" 2' 7" 9' 0" 161 lbs. 24'  9' 1" 22'   8" 10'   7"  4'   7" 6' 3"  5' 4" 12' 1" 2' 7" 9' 0" 124 lbs. 28' 10' 4" 26'   6" 14'   5"  8'   5" 6' 3"  9' 5" 12' 1" 2' 7" 9' 0"   81 lbs. 30' 10' 5" 28'   6" 15'   6"  9'   4" 6' 3" 10' 7" 13' 0" 3' 6" 9' 0"   70 lbs. 32' 10' 4" 30'   7" 16' 11" 10'   9" 6' 1" 11' 9" 13' 9" 4' 3" 9' 0"   71 lbs. TOWING ANGLE — Model HST-20T  Transport 36' 10'   3" 34' 11" 16'   6"  2'   7" 8'   1"  4' 10" 18' 5" 2' 7" 15' 0" 140 lbs. 40' 10' 10" 38' 10" 19'   8"  6'   3" 8'   1"  8'   3" 19' 2" 3' 4" 15' 0" 116 lbs. 42' 11'   3" 40'   9" 21'   4"  8' 11" 7' 11"  9'   9" 19' 5" 3' 7" 15' 0"   97 lbs. 44' 11'   2" 42' 10" 22'   5"  9' 10" 7'   8" 11'   0" 20' 6" 4' 8" 15' 0"   98 lbs. 48' 11'   2" 47'   1" 24' 11" 12'   1" 6' 10" 13'   0" 22' 3" 6' 5" 15' 0"   85 lbs. TOWING ANGLE — Model HST-40T  Transport 54' 11' 1" 53' 2" 26' 2"  8' 2" 7' 11"  9' 0" 27' 0" 6' 0" 20' 0" 135 lbs. 60' 11' 7" 59' 1" 31' 1" 13' 1" 8'   1" 14' 3" 28' 0" 7' 0" 20' 0"   81 lbs.   30° ANGLE — Model HST-10T  Transport 20' 10' 0" 17' 4"  5'   5"  2'   2" 8'   9"  2'   6" 11' 11" 2' 7" 9' 0" 184 lbs. 24' 12' 0" 20' 9"  8' 11"  5'   8" 8'   9"  6'   6" 11' 11" 2' 7" 9' 0" 158 lbs. 28' 14' 0" 24' 3" 12'   4"  9'   2" 8'   9" 10'   6" 11' 11" 2' 7" 9' 0" 120 lbs. 30' 15' 0" 26' 0" 13'   4" 10'   6" 8' 11" 12'   1" 12'   8" 3' 6" 9' 0" 115 lbs. 32' 16' 0" 27' 9" 14'   5" 11' 11" 9'   1" 13' 10" 13'   3" 4' 3" 9' 0" 112 lbs.   30° ANGLE — Model HST-20T  Transport 36' 18' 0" 31' 2" 13'   0"  6' 7" 14' 3"  7'   7" 18'   2" 2' 7" 15' 0" 205 lbs. 40' 20' 0" 34' 8" 15' 10"  9' 8" 14' 5" 11'   2" 18'   9" 3' 4" 15' 0" 178 lbs. 42' 21' 0" 36' 4" 17'   4" 11' 4" 14' 6" 13'   1" 19'   0" 3' 7" 15' 0" 170 lbs. 44' 22' 0" 38' 1" 18'   3" 12' 8" 14' 8" 14'   7" 19' 11" 4' 8" 15' 0" 167 lbs. 48' 24' 0" 41' 7" 20'   3" 15' 6" 15' 1" 17' 10" 21'   4" 6' 5" 15' 0" 160 lbs.   30° ANGLE — Model HST-40T  Transport 54' 27' 0" 46' 9" 20' 7" 12' 11" 19' 7" 14' 11" 26' 2" 6' 0" 20' 0" 225 lbs. 60' 30' 0" 52' 0" 25' 0" 17' 10" 19' 8" 20'   8" 27' 0" 7' 0" 20' 0" 190 lbs.   35° ANGLE — Model HST-10T  Transport 20' 11' 6" 16'   5"  4'   7"  3'   0" 9' 5"  3' 7" 11' 9" 2' 7" 9' 0" 199 lbs. 24' 13' 9" 19'   8"  7' 11"  6'   3" 9' 5"  7' 7" 11' 9" 2' 7" 9' 0" 180 lbs. 28' 16' 1" 22' 11" 11'   2"  9'   6" 9' 5" 11' 7" 11' 9" 2' 7" 9' 0" 141 lbs. 30' 17' 3" 24'   7" 12'   1" 10' 11" 9' 7" 13' 4" 12' 6" 3' 6" 9' 0" 137 lbs. 32' 18' 4" 26'   3" 13'   2" 12'   5" 9' 8" 15' 2" 13' 0" 4' 3" 9' 0" 132 lbs.   35° ANGLE — Model HST-20T  Transport 36' 20'   8" 29' 6" 11' 6"  7' 7" 15'   4"  9'   3" 18'   0" 2' 7" 15' 0" 240 lbs. 40' 22' 11" 32' 9" 14' 2" 10' 8" 15'   6" 13'   0" 18'   7" 3' 4" 15' 0" 215 lbs. 42' 24'   1" 34' 5" 15' 7" 12' 3" 15'   6" 14' 11" 18' 10" 3' 7" 15' 0" 208 lbs. 44' 25'   3" 36' 0" 16' 5" 13' 7" 15'   9" 16'   7" 19'   8" 4' 8" 15' 0" 200 lbs. 48' 27'   6" 39' 4" 18' 4" 16' 7" 15' 11" 20'   3" 20' 11" 6' 5" 15' 0" 188 lbs.   35° ANGLE — Model HST-40T  Transport 54' 31' 0" 44' 3" 18' 4" 14' 6" 20'   9" 17' 9" 25' 10" 6' 0" 20' 0" 272 lbs. 60' 34' 5" 49' 2" 22' 7" 19' 4" 20' 11" 23' 7" 26'   7" 7' 0" 20' 0" 230 lbs.   40° ANGLE — Model HST-10T  Transport 20' 12' 10" 15' 4"  3'   8"  3'   8"  9'   9"  4' 10" 11' 8" 2' 7" 9' 0" 216 lbs. 24' 15'   5" 18' 5"  6'   9"  6'   9"  9'   9"  8' 10" 11' 8" 2' 7" 9' 0" 200 lbs. 28' 18'   0" 21' 5"  9' 10"  9' 10"  9'   9" 12' 10" 11' 8" 2' 7" 9' 0" 162 lbs. 30' 19'   3" 23' 0" 10'   9" 11'   3"  9' 10" 14'   9" 12' 3" 3' 6" 9' 0" 160 lbs. 32' 20'   7" 24' 6" 11'   9" 13'   0" 10'   9" 16' 11" 12' 9" 4' 3" 9' 0" 154 lbs.   40° ANGLE — Model HST-20T  Transport 36' 23'   2" 27' 7"  9' 8"  8'   6" 16' 0" 11'   1" 17' 11" 2' 7" 15' 0" 261 lbs. 40' 25'   9" 30' 8" 12' 3" 11'   6" 16' 1" 15'   0" 18'   5" 3' 4" 15' 0" 248 lbs. 42' 27'   0" 32' 2" 13' 7" 13'   0" 16' 1" 17'   0" 18'   7" 3' 7" 15' 0" 240 lbs. 44' 28'   3" 33' 9" 14' 4" 14'   6" 16' 2" 18' 11" 19'   4" 4' 8" 15' 0" 235 lbs. 48' 30' 10" 36' 9" 16' 3" 17' 11" 17' 3" 23'   4" 20'   6" 6' 5" 15' 0" 226 lbs.   40° ANGLE — Model HST-40T  Transport 54' 34' 9" 41' 4" 15' 10" 16' 0" 21' 4" 20' 10" 25' 6" 6' 0" 20' 0" 312 lbs. 60' 38' 7" 46' 0" 19' 10" 20' 7" 21' 4" 26' 10" 26' 2" 7' 0" 20' 0" 270 lbs.   45° ANGLE — Model HST-10T  Transport 20' 14'   2" 14'   2"  2' 8"  4' 6" 11' 5"  6' 5" 11' 5" 2' 7" 9' 0" 239 lbs. 24' 17'   0" 17'   0"  5' 6"  7' 4" 11' 5" 10' 5" 11' 5" 2' 7" 9' 0" 228 lbs. 28' 19' 10" 19' 10"  8' 4" 10' 2" 11' 5" 14' 5" 11' 5" 2' 7" 9' 0" 197 lbs. 30' 21'   3" 21'   3"  9' 2" 11' 7" 12' 0" 16' 4" 12' 0" 3' 6" 9' 0" 181 lbs. 32' 22'   8" 22'   8" 10' 2" 13' 2" 12' 6" 18' 8" 12' 6" 4' 3" 9' 0" 173 lbs.   45° ANGLE — Model HST-20T  Transport 36' 25'   6" 25'   6"  7'   9"  9'   7" 17' 9" 13' 7" 17' 9" 2' 7" 15' 0" 300 lbs. 40' 28'   3" 28'   3" 10'   1" 12'   5" 18' 3" 17' 7" 18' 3" 3' 4" 15' 0" 287 lbs. 42' 29'   8" 29'   8" 11'   4" 13' 10" 18' 5" 19' 7" 18' 5" 3' 7" 15' 0" 280 lbs. 44' 31'   1" 31'   1" 12'   1" 15'   5" 19' 1" 21' 9" 19' 1" 4' 8" 15' 0" 277 lbs. 48' 33' 11" 33' 11" 13' 11" 18'   6" 20' 1" 26' 2" 20' 1" 6' 5" 15' 0" 270 lbs.   45° ANGLE — Model HST-40T  Transport 54' 38' 2" 38' 2" 13' 1" 17' 5" 25' 1" 25' 7" 25' 1" 6' 0" 20' 0" 352 lbs. 60' 42' 5" 42' 5" 16' 9" 21' 9" 25' 8" 30' 9" 25' 8" 7' 0" 20' 0" 323 lbs. Return to Index 68 HAYRITE BALE HANDLING SYSTEMS Hayrite’s stronger construction and superior engineering gives you smoother, more efficient, trouble-free operation ... all at a lower initial investment! Easier to handle, interchangeable sections and a fuller line of accessories make it simple to tailor-make a versatile, yet inexpensive bale handling system. You can elevate bales from your wagon or truck up into your barn — convey and stack bales in the mow — and load or unload your truck. For further savings, you can even use your existing general-purpose elevator with a Hayrite mow conveyor to convey and store bales in the mow. You won’t find a better value than Hayrite for fast, easy, dependable, one-man bale handling. SPECIFICATIONS   ELEVATOR LENGTH GUIDE A B    MAXIMUM ANGLE VARIOUS BALE LENGTHS D   C  Bale Maximum Length Angle Model Dimensions Description A B C D Extra Heavy-Duty 21-1/4" 23-3/4" 5-7/16" 12" Standard 21" 23-1/2" 3" 9-1/2" 20" 30º 24" 35º 30" 40º 36" 45º Horsepower Requirements Bales should be “pulled toward” electric-motor drive end. However, if elevator is mounted on a transport, drive end must remain on ground and “push bales”. Horizontal Conveyor Incline Elevator 1/2 HP 16' –   28' 1/2 HP 16' – 24' 3/4 HP 30' –   44' 3/4 HP 28' – 40' 1 HP 48' –   60' 1 HP 42' – 44' 1-1/2 HP 64' –   90' 1-1/2 HP 48' – 60' 96' – 120' 2 HP Use 2.8" O.D. Type A motor pulley on horizontal conveyor and incline elevator. Use a farm-rated, totally enclosed, fan-cooled motor (with a manual-reset overload protector), rated between 1725 to 1800 RPM. NOTE: The above chart is only a guide –– the size, shape and weight of your bales; angle of elevator; and desired speed may affect your installation. Remember, bales are more effectively pulled than pushed. Less horsepower is required when pulled! H GT EN RL O AT EV EL REACH Elevator Elevator Length Reach Elevation Length E L E V A T I O N Reach Elevation 35° Angle 30° Angle 16' 13' 9"  8' 0" 16' 13' 0"  9' 0" 18' 15' 6"  9' 0" 18' 14' 9" 10' 3" 20' 17' 3" 10' 0" 20' 16' 6" 11' 6" 24' 20' 9" 12' 0" 24' 19' 9" 13' 9" 28' 24' 3" 14' 0" 28' 23' 0" 16' 0" 30' 26' 0" 15' 0" 30' 24' 6" 17' 3" 32' 27' 9" 16' 0" 32' 26' 3" 18' 3" 36' 31' 3" 18' 0" 36' 29' 6" 20' 9" 40' 34' 9" 20' 0" 40' 32' 9" 23' 0" 42' 36' 3" 21' 0" 42' 34' 6" 24' 0" 44' 38' 0" 22' 0" 44' 36' 0" 25' 3" 48' 41' 6" 24' 0" 48' 39' 3" 27' 6" 52' 45' 0" 26' 0" 52' 42' 6" 29' 9" 54' 46' 9" 27' 0" 54' 44' 3" 31' 0" 56' 48' 6" 28' 0" 56' 45' 9" 32' 0" 60' 52' 0" 30' 0" 60' 49' 3" 34' 6" 40° Angle 45° Angle 16' 12' 3" 10' 3" 16' 11' 3" 11' 3" 18' 13' 9" 11' 6" 18' 12' 9" 12' 9" 20' 15' 3" 12' 9" 20' 14' 3" 14' 3 “ 24' 18' 6" 15' 6" 24' 17' 0" 17' 0" 28' 21' 6" 18' 0" 28' 19' 9" 19' 9" 30' 23' 0" 19' 3" 30' 21' 3" 21' 3" 32' 24' 6" 20' 6" 32' 22' 9" 22' 9" 36' 27' 6" 23' 3" 36' 25' 6" 25' 6" 40' 30' 9" 25' 9" 40' 28' 3" 28' 3" 42' 32' 3" 27' 0" 42' 29' 9" 29' 9" 44' 33' 9" 28' 3" 44' 31' 0" 31' 0" 48' 36' 9" 30' 9" 48' 34' 0" 34' 0" 52' 39' 9" 33' 6" 52' 36' 9" 36' 9" 54' 41' 3" 34' 9" 54' 38' 3" 38' 3" 56' 43' 0" 36' 0" 56' 39' 6" 39' 6" 60' 46' 0" 38' 6" 60' 42' 6" 42' 6" Return to Index 69 HAYRITE Select from a wider choice of accessories for faster, easier and more efficient one-man bale handling Above drawing illustrates incline elevator assembled Connector plates: Connects incline elevator to to horizontal conveyor, using Bale Guides (model horizontal mow conveyor. Prevents bales from turning and tumbling out when transferring.           Bale chute          (grate-type,          6´ length) Hinges to elevator — tips back against wagon or truck for easy unloading. Long tapered design automatically lines up each bale to prevent them from tipping or turning while being conveyed up elevator. Grate-type construction permits loose material to fall through for smoother operation. HST-7A), Connector Plates (model HST-17A or 18A) and Bale Arrangers (model HST-16A).            Bale guides          Keeps bale twine from catching and breaking when bales are discharging from a steeply inclined elevator. Prevents bales from tipping and turning and then tumbling out when transferring from an inclined elevator to mow conveyor. Pair of sturdy steel tubes clamp onto sides of inclined elevator on top end. Transports Engineered for better balance and greater strength — now you can move your elevator with ease to exactly where you want it. Rugged, oversize 2" x 3" x 1/8" steel tubing transports are extra heavy for more strength. Wheels are set far apart for increased stability. Equipped with 15" four-bolt ag-type wheel rims (less rubber tires) mounted on regreaseable, tapered roller bearings (max. speed – 20 mph). Transport can be quickly raised from towing position up to 45º. Sturdy, easy-to-operate hand winch features double-disc, automatic brake system for positive load control. Winch is zinc plated to resist rust. Bale rails Rails increase height of elevator sides to prevent irregular shaped bales from tumbling out. Rigid 12´ long steel rails clamp onto sides of inclined elevator. Mow hangers Bale kickoff Sturdy, tapered design provides for fast, smooth, accurate unloading to either right or left from any point along conveyor. Pull control rope (rope not included), from mow floor to change direction of unloading or to slide kickoff to any position along full length of conveyor. Bales cannot be conveyed over kickoff and onward toward end of conveyor. bales into horizontal conveyor. Made of heavy galvanized steel. (No. HST-40T Transport illustrated) Bale chute (pan-type; 4´ length) Hinges to elevator — rests on its own stand or tips back against wagon or truck for easy unloading. Made of heavy, galvanized steel. Short tapered design automatically lines up each bale to prevent them from tipping or turning while being conveyed up elevator. Bale arrangers: Directs irregular shaped Makes it simple and easy to install conveyor from haytrack, rafters, or roof. Sturdy tubular steel hangers are extra wide to prevent bales from snagging. Recommended at ends and every 12´ of conveyor length for proper support. Transport hitch Specially-designed, extra-long pole to prevent elevator from binding against tractor or truck bumper during short turns — pole unpins for easy removal. Pin can be removed from rigid clevis to permit swiveling — prevents tractor or truck hitch pin from binding when elevator is raised. On the web at: www.loyal-roth.com Return to Index HAYRITE BALE HANDLING SYSTEMS 70 STANDARD ELEVATOR (with No. 55 steel detachable chain) Item No. COMPLETE ELEVATOR UNITS (Basic unit consists of 8´ drive & 8´ idler section) HEC-16M HEC-20M HEC-24M HEC-28M HEC-32M HEC-36M HEC-40M HEC-44M HEC-48M HEC-52M HEC-56M HEC-60M HEC-64M HEC-68M HEC-72M HEC-76M HEC-80M HEC-84M HEC-88M Selling Price    Approx. Weight Per Foot Total 16' Elevator - electric motor and motor pulley not included......................... 153 lbs. 20' Elevator - electric motor and motor pulley not included......................... 181 lbs. 24' Elevator - electric motor and motor pulley not included......................... 206 lbs. 28' Elevator - electric motor and motor pulley not included......................... 234 lbs. 32' Elevator - electric motor and motor pulley not included......................... 259 lbs. 36' Elevator - electric motor and motor pulley not included......................... 287 lbs. 40' Elevator - electric motor and motor pulley not included......................... 312 lbs. 44' Elevator - electric motor and motor pulley not included......................... 340 lbs. 48' Elevator - electric motor and motor pulley not included......................... 365 lbs. 52' Elevator - electric motor and motor pulley not included......................... 393 lbs. 56' Elevator - electric motor and motor pulley not included......................... 418 lbs. 60' Elevator - electric motor and motor pulley not included......................... 446 lbs. 64' Elevator - electric motor and motor pulley not included......................... 471 lbs. 68' Elevator - electric motor and motor pulley not included......................... 499 lbs. 72' Elevator - electric motor and motor pulley not included......................... 524 lbs. 76' Elevator - electric motor and motor pulley not included......................... 552 lbs. 80' Elevator - electric motor and motor pulley not included......................... 577 lbs. 84' Elevator - electric motor and motor pulley not included......................... 605 lbs. 88' Elevator - electric motor and motor pulley not included......................... 630 lbs. $62.13 59.65 54.79 54.07 51.16 50.97 48.95 49.02 47.48 47.65 46.45 46.67 45.66 45.90 45.04 45.29 44.56 44.81 44.16 $ 994.00 1193.00 1315.00 1514.00 1637.00 1835.00 1958.00 2157.00 2279.00 2478.00 2601.00 2800.00 2922.00 3121.00 3243.00 3442.00 3565.00 3764.00 3886.00 8' Elevator or Conveyor Extension Section Complete with Chain....... 53 lbs. $40.13 4' Elevator or Conveyor Extension Section Complete with Chain....... 28 lbs. 49.75 8' Elevator or Conveyor Idler Section Complete with Chain................ 56 lbs. 8' Drive Unit - electric motor and motor pulley not included................ 97 lbs. $ 321.00 199.00 414.00 580.00 INDIVIDUAL SECTIONS HEC-8E HEC-4E HEC-8I HEC-8M                    With 15" — 4-bolt wheel rims ... RUBBER TIRES NOT INCLUDED. TRANSPORTS                    HITCH NOT INCLUDED — See ACCESSORIES below. CAUTION: Do not mount a longer or shorter length elevator than recommended below on transport. Failure to heed may result in personal injury or death. HST-10T HST-20T Medium Duty Bale Elevator Transport - 18' total length (Fits only HEC elevators 20' through 32' in length). HITCH NOT INCLUDED — See ACCESSORIES below 303 lbs. $1523.00 Heavy Duty Bale Elevator Transport - 30' total length (Fits only HEC elevators 36' in length). Over 36', use EHD-model elevators HITCH NOT INCLUDED — See ACCESSORIES below........................................ 419 lbs. 1943.00 Approx. Selling Weight Price ACCESSORIES (Automatic Kick-Off [model HST-1A] and Bale Chutes [models HST-5A and HST-12A] are interchangeable with Miller, Smalley and Snowco Brands) Transport Hitch (for ‘Standard’ HEC model elevators) ............................................. 24 lbs. $119.00 Automatic Bale Kick-off (for ‘Standard’ HEC model elevators) — less ropes ......... 46 lbs. 368.00 Bale Chute (grate-type... 6' length for HEC and EHD elevators) .............................. 46 lbs. 221.00 Bale Chute (pan-type with stand... 4' length for HEC and EHD elevators) ............... 46 lbs. 206.00 Mow Hanger Chain Kit (with 24" long chain and hardware) .................................... 9 lbs. 60.00 Bale Side Rails (For 12' Extension... increases height approx. 3-1/2") ..... Per Pair 12 lbs. 119.00 Bale Guides (increases height approx. 4") ................................................ Per Pair 6 lbs. 64.00 Bale Arrangers (for HEC and EHD elevators) ........................................... Per Pair 27 lbs. 125.00 Connector Plates (for ‘Standard’ HEC model elevators) ........................... Per Pair 9 lbs. 73.00 Drive Kit, 1/2 HP (for HEC-16M thru 24M. Includes motor w/pulley & 7" cord w/plug-115V) 26 lbs. 302.00 Drive Kit, 3/4 HP (for HEC-16M thru 40M. Includes motor w/pulley & 7" cord w/plug-115V) 29 lbs. 338.00 HST-10A HST-1A HST-5A HST-12A HST-2A HST-6A HST-7A HST-16A HST-17A HST-50A HST-51A ELECTRIC MOTORS • • • • • • • MOTOR PULLEYS Heavy-duty, Farm Rated, single phase TEFC (Totally Enclosed Fan Cooled)... 1-year limited warranty Capacitor-start... Manual reset for thermal protection Double-shielded ball bearings... Rotation easily reversed Both windings and grease effective down to minus 40° F Motors supplied with slinger on shaft and gasketed conduit box Motor cord & switch not included (purchase from electrician) Approx. Item Shaft Frame Approx. F.L. Shipping No. HP RPM Dia. Size Amps Voltage Weight Selling  Price   __________________________________________________   MT102 1/2 1725 5/8" 56 7.4/3.7 115/230 25 lbs. $183.00 __________________________________________________   MT103 3/4 1725 5/8" 56 10.6/5.3 115/230 29 lbs. 220.00 __________________________________________________   MT104 1 1725 5/8" 56 14.0/7.0 115/230 34 lbs. 245.00 __________________________________________________   MT105 1-1/2 1725 5/8" 56 H 17.4/8.7 115/230 46 lbs. 297.00 __________________________________________________ *   MT106 2 1740 1-1/8" 182 T 20.0/10.0 115/230 88 lbs. 485.00 • Cast-iron... single-groove • Precision machined for perfect balance • Solid construction on fixed bore with hollow-head set screw and standard keyway Item No. Type O.D. Bore +  AK28X5/8 BK32X1-1/8 A A/B 2.8" Selling Price 5/8" $11.00 2.6"/3.0" 1-1/8" 29.90 + Generally recommended for elevators REPLACEMENT CHAIN (fully assembled — see following page) * Heavier 182 frame (rather than lighter 145 frame) recommended for our elevators – provides better starting performance/longer life. Electric motor must be totally enclosed, fan cooled and have a manual reset overload protector. Motor starting, stopping and motor reset controls must be located so that the operator has view of the entire operation. Wiring should be done by a certified electrician in accordance with local and national codes. Return to Index HAYRITE BALE HANDLING SYSTEMS EXTRA HEAVY DUTY ELEVATOR 71 (with No. 62 steel detachable chain) Selling Price    Approx. Item No. COMPLETE ELEVATOR UNITS (Basic unit consists of 6´ drive & 12´ idler section) Weight Per Foot Total EHD-18M   18' Elevator - electric motor and motor pulley not included............. 241 lbs. $78.11 EHD-24M   24' Elevator - electric motor and motor pulley not included............. 307 lbs. 72.58 EHD-30M   30' Elevator - electric motor and motor pulley not included............. 366 lbs. 66.70 EHD-36M   36' Elevator - electric motor and motor pulley not included............. 432 lbs. 64.92 EHD-42M   42' Elevator - electric motor and motor pulley not included............. 491 lbs. 61.83 EHD-48M   48' Elevator - electric motor and motor pulley not included............. 557 lbs. 61.08 EHD-54M   54' Elevator - electric motor and motor pulley not included............. 616 lbs. 59.11 EHD-60M   60' Elevator - electric motor and motor pulley not included............. 682 lbs. 58.80 EHD-66M   66' Elevator - electric motor and motor pulley not included............. 741 lbs. 57.38 EHD-72M   72' Elevator - electric motor and motor pulley not included............. 807 lbs. 57.26 EHD-78M   78' Elevator - electric motor and motor pulley not included............. 866 lbs. 56.19 EHD-84M   84' Elevator - electric motor and motor pulley not included............. 932 lbs. 56.17 EHD-90M   90' Elevator - electric motor and motor pulley not included............. 991 lbs. 55.31 EHD-96M   96' Elevator - electric motor and motor pulley not included............. 1057 lbs. 55.35 EHD-102M 102' Elevator - electric motor and motor pulley not included............ 1116 lbs. 54.64 EHD-108M 108' Elevator - electric motor and motor pulley not included............ 1182 lbs. 54.71 EHD-114M 114' Elevator - electric motor and motor pulley not included............ 1241 lbs. 54.11 EHD-120M 120' Elevator - electric motor and motor pulley not included............ 1307 lbs. 54.20 $ 1406.00 1742.00 2001.00 2337.00 2597.00 2932.00 3192.00 3528.00 3787.00 4123.00 4383.00 4718.00 4978.00 5314.00 5573.00 5909.00 6169.00 6504.00 INDIVIDUAL SECTIONS EHD-12E 12' Elevator or Conveyor Extension Section Complete with Chain... 125 lbs. $49.58 EHD-6E   6' Elevator or Conveyor Extension Section Complete with Chain... 66 lbs. 56.00 EHD-12I 12' Elevator or Conveyor Idler Section Complete with Chain............ 130 lbs. EHD-6M   6' Drive Unit - electric motor and motor pulley not included............ 111 lbs. $ 595.00 336.00 706.00 700.00                    With 15" – 4-bolt wheel rims ... RUBBER TIRES NOT INCLUDED. TRANSPORTS                    HITCH NOT INCLUDED — See ACCESSORIES below CAUTION: Do not mount a longer or shorter length elevator than recommended below on transport. Failure to heed may result in personal injury or death. HST-10T HST-20T HST-40T Medium Duty Bale Elevator Transport - 18' total length (Fits only EHD elevators 24' through 30' in length). HITCH NOT INCLUDED — See ACCESSORIES below Heavy Duty Bale Elevator Transport - 30' total length (Fits only EHD elevators 36' through 48' in length). HITCH NOT INCLUDED — See ACCESSORIES below Extra Heavy Duty Bale Elevator Transport - 40' total length (Fits only EHD elevators 54' through 60' in length). HITCH NOT INCLUDED — See ACCESSORIES below Approx. Selling Weight Price ACCESSORIES 303 lbs. $1523.00 419 lbs. 1943.00 510 lbs. 2356.00 (. Automatic Kick-Off [Model HST-1A] and Bale Chutes [Models HST-5A and .HST-12A] are interchangeable with Miller, Smalley and Snowco Brands) HST-15A HST-13A HST-5A HST-12A HST-2A HST-6A HST-7A HST-16A HST-18A HST-50A HST-51A Transport Hitch (for ‘Extra Heavy Duty’ EHD model elevators) ................................ Automatic Bale Kick-off (for ‘Extra Heavy Duty’ EHD model elevators) — less ropes .... Bale Chute (grate-type... 6' length for HEC and EHD elevators) ............................... Bale Chute (pan-type with stand... 4' length for HEC and EHD elevators) ................ Mow Hanger Chain Kit (with 24" long chain and hardware) ..................................... Bale Side Rails (For 12' Extension... increases height approx. 3-1/2") ....... Per Pair Bale Guides (increases height approx. 4") .................................................. Per Pair Bale Arrangers (for HEC and EHD elevators) ............................................. Per Pair Connector Plates (for ‘Extra Heavy Duty’ EHD model elevators) ............... Per Pair Drive Kit, 1/2 HP (for EHD-18M thru 24M. Includes motor w/pulley & 7" cord w/plug-115V) Drive Kit, 3/4 HP (for EHD-18M thru 36M. Includes motor w/pulley & 7" cord w/plug-115V) Electric Motors and Pulleys also available — see prior page. 24 lbs. 46 lbs. 46 lbs. 46 lbs. 9 lbs. 12 lbs. 6 lbs. 27 lbs. 9 lbs. 26 lbs. 29 lbs. $ 119.00 368.00 221.00 206.00 60.00 119.00 64.00 125.00 73.00 302.00 338.00 HC55­__ No. 55 Steel Detachable Chain with Raised Links (every 24") ........... Per Foot*   .7 lbs. HC62__ No. 62 Steel Detachable Chain with Raised Links (every 24") ........... Per Foot** 1.0 lbs. HB4-55 No. 55 Raised Link Only................................................................................. Each .2 lbs. HB4-62 No. 62 Raised Link Only................................................................................. Each .3 lbs.   *Available in 8´, 12´, 16´, or 24´ lengths   **Available in 12´ and 24´ lengths $6.59 8.54 3.49 5.05 REPLACEMENT CHAIN                         (fully assembled — ready to go) Got a Question? Our skilled staff has the proven know-how acquired from thousands of barn installations. We can draw on our many years of experience to answer your technical questions. We’ll help you select the most effective — most economical bale handling system. Return to Index 72 LOYAL MS 23B COMPACT MANURE SPREADER Ideal for Small Horse Stables ... Hobby Farms Tows Behind an ATV or Lawn Tractor 28.6 cu. ft. capacity Pull 46-1/2" wide spreader right to stall ... cut cleaning time by 50%. Drive to nearby field or pasture ... spreading takes about a minute. No more wheelbarrow ... manure piles ... disposal costs! • Ground-driven (no PTO) — any 10 HP garden tractor can pull • No belts to slip — apron chain is ratchet-driven by one wheel ... beater is chain-driven by opposite wheel • ‘Bear-claw’ beaters quickly shred and spread all types of manure (including that mixed with straw or hay), plus shavings, grass clippings and compost • Simple to operate — up-front controls for apron-chain and beater • Fully assembled — ready to go • Well balanced ... for moving by hand • Ideal for 1–6 stalls • Not a toy! Ruggedly constructed. Performs just like the big, expensive spreaders Several leading horse magazines have given compact manure spreaders rave reviews ... for making manure disposal faster and easier ... while providing excellent value. Return to Index 73 Better engineering — stronger construction  Specifications Loyal Loyal Heaped capacity: ➞ ➞ ➞ ➞ Tires 22.7" O.D., high-flotation, ground-gripping Greasable idler sprockets – Reduces wear; increases life Smaller 1-1/4" square-tube axle Lighter axle (23 lbs) – Weaker, flexing axle increases stress on spreader box Smaller spreader box mounts – Small spreader box mounts concentrate weight in a narrow area, increasing pressure on box Narrower apron-chain-flight return guides Non-greasable idler sprockets – Increases wear; reduces life ➞ Hubs 5-bolt Lighter 1-1/4" flat-bar, rear box frame Weaker, straight-pole hitch design Lighter 1-1/4" square tube pole – Directs 100% of the pulling force to the one weakest point on the axle (middle) ... results in a less sturdy, flexing axle – Straight-pole concentrates weight in a narrow area – Concentrated weight increases pressure on spreader box ➞ Cross members (14 ga galv) 2 Heavier 1-1/2" angle-iron, rear box frame Stronger, A-frame hitch design Beaters Heavier 1-1/2" square-tube pole (bear-claw design) 12-paddles – Directs 100% of the pulling force toward the two strongest points Beater shaft 3/4" diameter on the axle (outer ends) ... no axle flexing Beater drive #40 roller chain – Distributes box weight over wider Bearings Greasable, bronze, area self-aligning, pillow-block – Wider distribution of weight relieves pressure on spreader box Apron chain No. 55 Larger 1-1/2" square-tube axle Apron chain flights 10 Heavier axle (48 lbs) – Angle-iron reinforced, non-flexing axle Apron drive Ratchet reduces stress on spreader box Wider spreader box mounts Axle spindle 1" diameter – Oversize spreader box mounts distribute weight over wider Axle bearings Timken, taper-roller area, relieving pressure on bearings spreader box Wheels 12" x 4 x 5 Wider apron-chain-flight return guides ➞ ➞ ➞ ➞ Other Brands 23 bu Galvanized spreader box Painted spreader box (28.62 cu.ft.) Powder-coated paint finish No powder-coated paint finish ... (on other parts) ... for longer life shorter life Box dimensions: – Length 70-1/4" Thicker apron-chain flights — 10 ga Thinner apron-chain flights — 14 ga – Width (with flare) 36-1/2" – Width (less flare) 27-1/2" Heavier spreader weight — 385 lbs Lighter spreader weight — 325 lbs – Height 16-1/2" Larger heaped capacity — 23 bu Smaller heaped capacity — 21 bu – Ground Clearance 9" (per ASAE computation) (per ASAE computation) Flared sides ... wider, 36-1/2" box Non-flared sides ... General dimensions: narrower 27-1/2" box – Overall length 101" – Overall width 46-1/2" – More difficult to load – Overall height 40"   – Easier to load – Less capacity – Overall height (to box top) 32-1/4"   – Greater capacity – Less spillage ... cleaner – More spillage .. messier Box 14 ga galvanized steel ➞ More for your dollar — compare & save! Tongue 1-1/2" square tubing Horsepower required 10+ hp Approx. ship weight 455 lbs PRICE LIST MS23B $2295.00 Longer 20" controls ... with rubber grips – More leverage — easier to change “On” and “Off” settings for apron-chain and beater   Narrow 1/4" non-lined   sprocket-arm pivot    – More side to side movement —    results in sprocket misalignment    after extended use     Non-adjustable sprockets      – Difficult to service ➞ ITEM SELLING NO. PRICE ➞     Wider 3" bronze-lined    sprocket-arm pivot      – Prevents side to side          movement — for better         sprocket alignment ... even         after extended use        Adjustable sprockets        – Easier to service ➞ 1/2" dia. (not included) ➞ Hitch Pin Shorter 12" controls ... no rubber grips – Less leverage — difficult to change “On” and “Off” settings for apron-chain and beater Return to Index 74 LOYAL MULTI-USE HARROW Ideal for Horse Owners ... Hobby Farms Tows Behind an ATV or Lawn Tractor Better Engineered Heavier Construction s art ase P No , Gre t! us Oil to r Adj o More Economical Handiest Implement You’ll Ever Own! Pull forward, with tines pointed slightly back Pull backwards, with tines Turn over pointed further back Rake & smooth in 1-pass. Sections work independently Use alone ... or behind farm implements for one-pass coverage — pull with your ATV, lawn tractor, tractor or pickup (only requires 1 HP per foot of width for the mini-harrow ... 2 HP per foot for other models). • Scatter manure droppings • Break up and level heavy soil • Aerate and dethatch pastures, lawns • Prepare nicer seed beds • Loosen and smooth paths and driveways • Work in fertilizer and seeds • Fluff, dry and level tracks, ball diamonds, etc. • Incorporate herbicides • Minimum till — stalks, crusts and ridges • Gentle “first” cultivation The Secret Is In The Tine!  Pull backwards Pull forward  for deep penetration for light penetration — Special design prevents tines from spreading apart in center ... heavy residue is quickly surfaced without clogging or bunching — Unique construction allows tines to follow every contour of your ground ... for maximum coverage ➯ — Stronger 1/2" dia. tines (5" L) are cold-formed from high-carbon steel ... to eliminate breakage h ➯ Light penetration position h Deep penetration position — More tines — 98 per 4´ width — offset to avoid ridges Return to Index RENEWS SOIL ... NATURALLY! 75 Raking action removes dead residue ... providing better air, water and nitrogen penetration to roots ... recycles rich, organic materials evenly back into soil ... for vigorous, full growth. ALL SEASON TOOL SPRING — stand matted grass up to stimulate rapid green-up, pull leaves out of low spots, loosen thatch buildup, aerate lawns before feed and seed (then harrow afterwards to speed fertilizer penetration and increase seed germination), prep seed beds (then work in and cover fertilizer and seed). SUMMER — break up soil crusts on new seed beds without damaging young plants, rake pastures regularly to scatter manure droppings and stimulate grass growth, lift up crabgrass runners and heads so mower can cut; rake and smooth dirt paths, gravel driveways and athletic fields. FALL — shred dry leaves, aerate and dethatch lawns, minimum till. WINTER — fluff/smooth snow on trails, break up ice crust. 50% FASTER — MORE EFFICIENT Cover more acres per hour — “multi-position” tines permit higher operating speeds (up to 8 mph vs. 4 mph) ... without skipping, jumping or skimming surfaces ... unlike “fixed position” tines. COMBINE SECTIONS FOR DESIRED WIDTH & LENGTH • Harrow consists of sections for easy handling and storage (simple hooks attach sections — cannot become unlinked while in use): – Combine 4´, 6´ and 10´ wide sections to obtain overall width – Combine 4´ long sections to obtain overall length • Includes heavy-duty steel drawbar ... with 5/16" chain with ring-type hitch • Compact storage — roll up sections or hang on wall OPTIONAL 3-POINT LIFT (fits category 1 three-point hitches) • Enables harrow to be quickly and easily moved to and from fields • Allows operator to back up with harrow • Easy to attach and store • Includes tubular-steel frame, chrome-plated chain lengths and required hardware (shipped unassembled) COMPARE AND SAVE! LENGTH (Drawbar to rear) LOYAL BRAND MODEL WIDTH LOYAL X WEIGHT H4X4   4' Multi-Use harrow 4' n/a   89 lbs. H4X6   4' Mini harrow 6' 5' 6" 115 lbs. H6X4   6' Small harrow 4' n/a 138 lbs. H4X8   4' Harrow 8' (B) 7' 6" 146 lbs. H6X8   6' Harrow 8' (B) 7' 6" 229 lbs. H8X8   8' Harrow (A) 8' (B) 7' 6" 280 lbs. H10X8 10' Harrow 8' (B) 7' 6" 390 lbs. H12X8 12' Harrow (A) 8' (B) 7' 6" 462 lbs. H14X8 14' Harrow (A) 8' (B) 7' 6" 520 lbs. HL4   4' – 3-Point Lift n/a n/a 117 lbs. HL6   6' – 3-Point Lift n/a n/a 128 lbs. HL8   8' – 3-Point Lift n/a n/a 140 lbs. HL10 10' – 3-Point Lift n/a n/a 154 lbs. HL12 12' – 3-Point Lift n/a n/a 193 lbs. HL14 14' – 3-Point Lift n/a n/a 210 lbs. (A) Combine 4, 6 and 10´ sections to obtain overall width. (B) Combine 4´ long sections to obtain overall length. SELLING PRICE $  289.00 357.00 368.00 415.00 578.00 650.00 1012.00 1181.00 1364.00 573.00 592.00 618.00 635.00 745.00 815.00 Return to Index 76 LOYAL POLY DUMP-TRAILER Ideal for Homeowners, Farmers, Landscapers Tows Behind an ATV, Lawn or Utility Tractor rugged construction • Thick-wall poly (black) – excellent cracking and puncture resistance • Poly is ribbed for extra rigidity • Solid-aluminum rails (2"W x 1-1/2"H molded into poly) ... for super-strong bed • Sturdy, power-coated, steel frame • 18" x 9.5" wide, knobby-floation-tires roll easy ... help protect lawns • 4-bolt wheel hubs with greasable, tapered-roller-bearings ... for heavier loads • 1-1/4" solid-steel axle • 2" ball coupler • Heavy-duty hauling – 20 cu. ft/1500 lb load capacity • Bed: 46"W x 65"L x 14"H • Overall: 46"W x 90"L x 31"H • Ground cleareance: 13.5" • Quick-release tipper-latch ... plus slick, smooth, poly surface ... for easy dumping • Molded-in fenders help protect driver from flying debris • Fold-away hitch for compact storage • 3-year limited warranty (bed only) Haul firewood plus hunting, farm & landscaping supplies UNASSEMBLED Item No. Description DT1500BL Approx. Selling Ship Weight Price ATV Poly Dump-Trailer – 20 cu. ft/1500 lb load capacity ......... 150 lbs. $ 550.00