Transcript
Fast Ethernet Fiber Converter 10/100Base Description ALANTEK series auto-negotiation Fast Ethernet Fiber Converter can achieve the conversion between 10/100BASE-TX and 100BASE-FX, extending the transmission distance of legal 10M Ethernet or 100M Fast Ethernet up to 120km. It support a wide variety of networks providing a reliable and cost-effective fiber optic connectivity solution for Enterprise networks. The modular design and flexible configuration enable scalable fiber network implementation. It can be used as a standalone module or with a 14-slot rack mount chassis. The 6 LED indicators on the front panel allow user to monitor the status and activity of the Converter.
Application Suitable for conversion between 10/100Base-T Ethernet to 100Base-FX Fiber application.
Features • Singlemode or Multimode with ST, SC, FC or LC connectors • Support MDI/MDI-X auto crossover. Ethernet port auto-detect and adjust to Straight-through or Cross-over cable connection. Eliminate the need for specific cable. • Support half or full duplex mode communication with auto-negotiation function. • Support 14-slot 19” 2U rack mount chassis. • External Power Supply. • Conform to FCC and CE safety standards.
ALANTEK® COMMUNICATIONS USA 2009. This information provides a general description of product and shall not form part of any contract. Improvement or changes may be made to the product without advanced notification.
Specification Standard
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3x Flow Control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1550nm
Ethernet Port Fiber Port
One RJ45 Connector, UTP/FTP. Duplex ST, SC, FC or LC
Transmission Distance
Cat5E or Cat6: 100m Dual-fiber Singlemode: 2/25/40/60/80/100/120km
Conversion Mode
Medium conversion, Store and Forward
MAC Add. Table
1K
Buffer Space Flow Control
100K Full Duplex: IEEE802.3x Flow Control Half Duplex: Back Pressure
Bit Error Rate
< 1/1000000000
MTBF
100,000 hours
Power
External: 5V DC, 1A, 5W
Temperature
Operating: 0°C ~ +50°C Storage: -20°C ~ +70°C
Humidity
5% ~ 90%
Emission
FCC Class B, CE Class B, VCCI Class B
Dimension
70 x 95 x 26mm (External Power Supply)
Connector
Fiber Type
Fiber Model
Wavelength
TX Power dBm
RX Sensitivity dBm
Distance km
3MC-FDS2EX-TU02
SC
Single Mode
Dual Fiber
1310
-8 ~ -3
≤ -19
2
3MC-FDS2EX-TU20
SC
Single Mode
Dual Fiber
1310
-15 ~ -3
≤ -32
20
3MC-FDS2EX-TU40
SC
Single Mode
Dual Fiber
1310
-8 ~ -3
≤ -34
40
3MC-FDS2EX-TU60
SC
Single Mode
Dual Fiber
1310
-5 ~ 0
≤ -34
60
3MC-FDS2EX-TU80
SC
Single Mode
Dual Fiber
1550
-5 ~ 0
≤ -34
80
3MC-FDS2EX-TUM1
SC
Single Mode
Dual Fiber
1550
-2 ~ 5
≤ -36
100
3MC-FDS2EX-TUMA
SC
Single Mode
Dual Fiber
1550
-2 ~ 5
≤ -36
120
Part Number
3MC-RK14DP-WU00
14-slot 2U Fiber Converter Rack with dual power, 100V-275V AC. (Plug and Play)
• Substitute 2 : 7 for LC connector, 1 for ST connector, 3 for FC connector. • Substitute U : E = Europe Style DC Power Adaptor, U = U.S. Style DC Power Adaptor. • Optional : Link Fault Pass-through (LFP)
ALANTEK® COMMUNICATIONS USA 2009. This information provides a general description of product and shall not form part of any contract. Improvement or changes may be made to the product without advanced notification.
Application
Fiber Converter Panel Identification for front panel of the transceiver is shown below: • TX - transmitting terminal • RX - receiving terminal • PWR - Power Indicator Light “ON” means normal operation of DC 5V power supply adaptor. • 100 - Indicator Light “ON” means the rate of the electric port is 100 Mbps, while “OFF” means the rate is 10 Mbps. • LINK/ACT (FX) “ON” means connectivity of the optical channel “FLASH” means data transfer in the channel “OFF” means non-connectivity of the optical channel. • LINK/ACT (TX) “ON” means connectivity of the electric circuit “FLASH” means data transfer in the circuit “OFF” means non-connectivity of the electric circuit. • SD - Indicator Light “ON” means input of optical signal “OFF” means non input. • FDX/COL: “ON” means full duplex electric port “OFF” means half-duplex electric port. • RJ-45 Jack - RJ-45 twisted pair port
ALANTEK® COMMUNICATIONS USA 2009. This information provides a general description of product and shall not form part of any contract. Improvement or changes may be made to the product without advanced notification.
Rear Panel There is only a DC 5V external power port on the rear panel:
Mounting Dimensions
ALANTEK® COMMUNICATIONS USA 2009. This information provides a general description of product and shall not form part of any contract. Improvement or changes may be made to the product without advanced notification.
