Transcript
Ver.1.1.0 (160520) Digital Matrix Switcher (Scan converter output board)
FDX-16
RoHS
The IDK FDX series represent a new level of matrix switching for AV systems. The FDX series combine the simplicity and reliability of a fixed I/O matrix switcher with the convenience and flexibility of a modular matrix switcher. The FDX accepts any combination of available HDMI / DVI, HDBaseT, or fiber optic extension input / output boards. Scan converter output boards are also available, and those scan converter output boards enable to switch video signals which have different resolutions and synchronization timing seamlessly. Input and output boards are available in 4-input, 4-output, providing various I/O size combinations with sizes from 4x4 to 64x64, depending on the FDX frame selected. The FDX series also supports HDCP, and it is ideal for a wide range of applications that require routing of high-resolution digital video signals. The FDX series also have RS-232 and LAN ports for external device control. ■Specification
Input
Video
Output
Video
Item HDMI / DVI HDBaseT Optical extension HDMI / DVI HDBaseT Optical extension Scan converter
Function Others
Instant Alert output Serial control port External control
LAN control port MAU-1616 (option)
Number / Signal Connector Number / Signal Connector Number / Signal Connector Number / Signal Connector
Power
Power consumption (*19)
Dimensions Others
Weight (*19)
Temperature Humidity
Description Up to 16 inputs - 4 inputs per board - Any combination of input boards can be install up to 4 boards and 16 inputs Up to 8 or 16 outputs - 4 outputs per board (without scaler) - 2 outputs per board (with scaler) - Any combination of output boards can be install up to 4 boards and 16 outputs Aspect Ratio Control, Seamless Switching (*16), Picture adjustment (brightness, contrast, display position, display size), Motion adaptive I/P conversion Audio breakaway enables independent audio and video switching - Audio unit MAU-1616 is required (optional) Startup memory Preset memory (32 settings and startup settings) Last memory Anti-Snow (*17) Connection Reset (*18) Front panel security lockout RS232C transmission (HDBaseT / Optical output slot boards) Customizable input / output numbers by 4 ports or 2 ports input / output slot boards Input, output, and CPU boards can be exchanged without taking off the unit from rack mount 1 port / Power unit monitoring, Fan unit monitoring 1 terminal block 2-pin 1 port / RS-232C 1 male 9-pin D-Sub 1 port / 10Base-T (Auto Negotiation), 100Base-TX (Auto Negotiation), Auto MDI/MDI-X 1 RJ-45 1 port 1 female 25-pin D-Sub 100 - 240 VAC ± 10%, 50 Hz / 60 Hz ± 3 Hz HDMI / DVI input / output Max. configuration: About 123 Watts HDBaseT input / output Max. configuration: About 212 Watts Fiber optic extension input / output Max. configuration: About 255 Watts HDMI / DVI input / scan converter output Max. configuration: About 118 Watts HDBaseT input / scan converter output Max. configuration: About 200 Watts Fiber optic extension input / scan converter output Max. configuration: About 216 Watts 16.93 (W) x 1.73 (H) x 13.88 (D)” (approx.) / 430 (W) x 132 (H) x 350 (D) mm (EIA rack 3U, not including projections) HDMI / DVI input / output Max. configuration: About 21.61 lbs. approx. / 9.8 kg HDBaseT input / output Max. configuration: About 24.03 lbs. approx. / 10.9 kg Fiber optic extension input / output Max. configuration: About 27.34 lbs. / 12.4 kg HDMI / DVI input / scan converter output Max. configuration: About 22.70 lbs. / 10.3 kg HDBaseT input / scan converter output Max. configuration: About 24.47 lbs. / 11.1 kg Fiber optic extension input / scan converter output Max. configuration: About 27.78 lbs. / 12.6 kg Operating: 32 °F to 104 °F / 0 °C to +40 °C Storage: -4 °F to +176 °F / -20 °C to +80 °C Operating/ Storage: 20 % to 90 % (Non Condensing)
■Input Board Specification HDMI / DVI input board Number / Signal Video
Connector Formats Others
Audio
Number / Signal
Connector Maximum distance
4 inputs / HDMI Deep Color (*1) / DVI 1.0 / HDCP 1.4 - TMDS single link - TMDS clock: 25 MHz to 225 MHz - Dot clock: 25 MHz to 165 MHz 4 female 29-pin DVI-I *Analog signals cannot input 480i / 480p / 576i / 576p / 720p / 1080i / 1080p VGA to QWXGA * WUXGA / QWXGA only support Reduced Blanking EDID emulation, Digital cable EQ 4 inputs / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 4 female 29-pin DVI-I From 33 ft. (approx.) /10 m up to 99 ft. (approx.) / 30 m (*2)
HDBaseT input board Number / Signal Video
Connector Formats
Audio
Others Number / Signal
4 inputs / HDBaseT / HDMI Deep Color (*1) / DVI 1.0 / HDCP 1.4 (*3) - TMDS single link - TMDS clock: 25 MHz to 225 MHz - Dot clock: 25 MHz to 165 MHz 4 RJ-45 (*4) 480i / 480p / 576i / 576p / 720p / 1080i / 1080p VGA to QWXGA * WUXGA / QWXGA only support Reduced Blanking EDID emulation 4 inputs / HDBaseT / Multi-channel linear PCM up to 8 channels
________________________________________________________________________________________________________________________________________________ ●All specifications and drawings are subject to change without notice. ●Please do not use the supplied AC adapter and power supply cable for other products. ●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●PJLink is a trademark in Japan, the United States, and other countries/regions. ●HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ●The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan ●All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
IDK Corporation FDX-16
Ver.1.1.0 (160520)
Connector Twisted pair cables Maximum distance
- Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 4 RJ-45 (*4) Cat6 UTP/STP straight cable, Cat5e UTP/STP straight cable (*5) Up to 330ft (approx.) / 100 m(*6)
Fiber optic extension input board (*7) Number / Signal Connector Video Formats Others Audio Fiber optic cable
Number / Signal Connector Suitable cable Polishing (*10)
Maximum distance (*11)
4 inputs / Optical signals for extension / HDMI (*8) / DVI 1.0 / HDCP 1.4 - TMDS single link - TMDS clock: 25 MHz to 225 MHz 4 SFP modules (2 LC connectors per SFP module) 480i / 480p / 576i / 576p / 720p / 1080i / 1080p VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) / WXGA (1366x768) /SXGA+ / WXGA+ / WXGA++ / UXGA/WSXGA+/WUXGA * WUXGA only supports DVI signal and Reduced Blanking EDID emulation 4 inputs / Optical signals for extension / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 4 SFP modules (2 LC connectors per SFP module) Duplex fiber cable, SFP module (2 LC connectors) (*9) SFP for Multimode: PC (recommended) SFP for Singlemode: UPC (recommended), SPC supported * APC is not supported Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km
■Output Board Specification HDMI / DVI output board Number / Signal Video
Connector Formats Others
Audio
Number / Signal
Connector Maximum distance
4 outputs / HDMI Deep Color (*1) / DVI 1.0 / HDCP 1.4 - TMDS single link - TMDS clock: 25 MHz to 225 MHz - Dot clock: 25 MHz to 165 MHz 4 female 29-pin DVI-I *Analog signals cannot input 480i / 480p / 576i / 576p / 720p / 1080i / 1080p VGA to QWXGA * WUXGA / QWXGA only support Reduced Blanking Digital cable EQ 4 outputs / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 4 female 29-pin DVI-I From 33 ft. (approx.) /10 m up to 131 ft. (approx.) / 40 m (*2)
HDBaseT output board Number / Signal Video Connector Formats
Audio
Number / Signal
Connector Twisted pair cables Maximum distance
4 outputs / HDBaseT / HDMI Deep Color (*1) / DVI 1.0 / HDCP 1.4 (*12) - TMDS single link - TMDS clock: 25 MHz to 225 MHz - Dot clock: 25 MHz to 165 MHz 4 RJ-45 (*4) 480i / 480p / 576i / 576p / 720p / 1080i / 1080p VGA to QWXGA * WUXGA / QWXGA only support Reduced Blanking 4 outputs / HDBaseT / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 4 RJ-45 (*4) Cat6 UTP/STP straight cable, Cat5e UTP/STP straight cable (*5) 330 ft. (approx.) / 100 m (*6)
Fiber optic extension output board (*7) Number / Signal Video
Connector Formats
Audio Fiber optic cable
Number / Signal Connector Suitable cable Polishing (*10)
Maximum distance (*11)
4 oututs / Optical signals for extension / HDMI (*8) / DVI 1.0 / HDCP 1.4 - TMDS single link - TMDS clock: 25 MHz to 225 MHz 4 SFP modules (2 LC connectors per SFP module) 480i / 480p / 576i / 576p / 720p / 1080i / 1080p VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) / WXGA (1366x768) /SXGA+ / WXGA+ / WXGA++ / UXGA/WSXGA+/WUXGA * WUXGA only supports DVI signal and Reduced Blanking 4 outputs / Optical signals for extension / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 4 SFP modules (2 LC connectors per SFP module) Duplex fiber cable, SFP module (2 LC connectors) (*9) SFP for Multimode: PC (recommended) SFP for Singlemode: UPC (recommended), SPC supported * APC is not supported Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km
HDMI / DVI scan converter output board Number / Signal Video
Connector Formats
2 outputs (*13) / HDMI Deep Color (*14) / DVI 1.0 / HDCP 1.4 - TMDS single link - TMDS clock: 25 MHz to 225 MHz 2 female 29-pin DVI-I *Analog signals cannot output 480i / 480p / 576i / 576p / 720p / 1080i / 1080p (*15) VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) /
________________________________________________________________________________________________________________________________________________ ●All specifications and drawings are subject to change without notice. ●Please do not use the supplied AC adapter and power supply cable for other products. ●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●PJLink is a trademark in Japan, the United States, and other countries/regions. ●HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ●The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan ●All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
IDK Corporation FDX-16
Ver.1.1.0 (160520)
Others Audio
Number / Signal
Connector Maximum distance (*11)
WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESA1080 / WUXGA / QWXGA * VESA1080 / WUXGA / QWXGA are output as Reduced Blanking Digital cable EQ 2 outputs / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 2 female 29-pin DVI-I From 33 ft. (approx.) /10 m up to 131 ft. (approx.) / 40 m (*2)
HDBaseT scan converter output board Number / Signal Video
Connector Formats
Audio
Number / Signal
Connector Twisted pair cables Maximum distance
2 outputs (*13) / HDBaseT / HDMI Deep Color (*14) / DVI 1.0 / HDCP 1.4 (*12) - TMDS single link - TMDS clock: 25 MHz to 225 MHz 2 RJ-45 (*4) 480i / 480p / 576i / 576p / 720p / 1080i / 1080p (*15) VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) / WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESA1080 / WUXGA / QWXGA * VESA1080 / WUXGA / QWXGA are output as Reduced Blanking 2 outputs / HDBaseT / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 2 RJ-45 (*4) Cat6 UTP/STP straight cable, Cat5e UTP/STP straight cable (*5) 330 ft. (approx.) / 100 m (*6)
Fiber optic extension output board (*7) Number / Signal Video
Connector Formats
Audio Fiber optic cable
Number / Signal Connector Suitable cable Polishing (*10)
Maximum distance (*11)
■SFP Specification Item Connector Wave length Maximum distance Max. input power Optical power level *1 *2
*3 *4 *5 *6 *7 *8 *9 *10 *11 *12 *13 *14 *15 *16 *17 *18 *19
Input Output
2 outputs (*13) / Optical signals for extension / HDMI (*8) / DVI 1.0 / HDCP 1.4 - TMDS single link - TMDS clock: 25 MHz to 225 MHz 2 SFP modules (2 LC connectors per SFP module) 480i / 480p / 576i / 576p / 720p / 1080i / 1080p (*15) VGA / SVGA / XGA / WXGA (1280x768) / WXGA (1280x800) / Quad-VGA / SXGA / WXGA (1360x768) / WXGA (1366x768) / SXGA+ / WXGA+ / WXGA++ / UXGA / WSXGA+ / VESA1080 / WUXGA * VESA1080 / WUXGA are output as Reduced Blanking 2 outputs / Optical signals for extension / Multi-channel linear PCM up to 8 channels - Sampling frequency: 32 kHz to 192 kHz - Sample size: 16 bit to 24 bit 2 SFP modules (2 LC connectors per SFP module) Duplex fiber cable, SFP module (2 LC connectors) (*9) SFP for Multimode: PC (recommended) SFP for Singlemode: UPC (recommended), SPC supported * APC is not supported Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km
Multimode fiber 2 LC connectors (Duplex) 850 nm (Oxide VCSEL Laser (*)) OM3: 985 ft. (approx.) / 300 m OM4: 3,280 ft. (approx.) / 1 km 0 dBm Over -13 dBm -9 dBm to -2.5 dBm
Singlemode fiber 1310 nm (Fabry-Perot laser (*)) OS1: 2.92 miles (approx.) / 4.7 km +0.5 dBm Over -18 dBm -8.4 dBm to -3 dBm
This product supports 36 bits/pixel Deep color (12 bit/component). It does not support x.v.Color, 3D, ARC, HEC, and CEC Transmission distance depends on connected equipment. The information above is maximum transmission distance when a cable made by IDK (AWG24) is used and signals (1080p 60 Hz 24bit/pixel (8bit/component)) are transmitted (both inputs and outputs of this product). When connected equipment is not matched to this product or other makers' cables are used, video signal can be unstable or video signals cannot be output, even though transmission distance is within the information above. It does not support DVI signals with HDCP. If you need to extend DVI signals with HDCP, please use The IDK HDC-TD100 as a transmitter. RJ-45 connector is only for extending video, audio, power for a receiver, control signals using a Cat5e/Cat6 twisted pair cable. IDK receivers are required. Please do not connect LAN devices to this connector. Wiring is straight T568A or T568B. If exceeding 50 m, it is recommended to use a Cat6 cable. If connected to a device whose status is significantly bad, video signal can be unstable or cannot be output. Check the operation beforehand or contact us. The IDK OPF-H1000-A must be connected for optical extension input and output cards. It does not support Deep Color, xvYCC, Lip Sync, 3D, ARC, HEC, and CEC Please refer to SFP Specification. It is possible to connect without using the recommended polishing method, but that may cause a change of extension distance ability due to an increase in return loss. Max. Extension distance is measured under following condition; using fiber of recommended polishing method, without connection at the transmission path and not exceeding the value of allowable bending radius. It does not support DVI signals with HDCP. If you need to extend DVI signals with HDCP, please use The IDK HDC-RD100 as a receiver. Scan converter output board uses 2 of 4 channels. Channel numbers are assigned to each connector consecutively. Channel number for unused channel is reserved but not be able to set. This product supports 30 bits/pixel Deep color (10 bit/component). It does not support x.v.Color, 3D, ARC, HEC, and CEC 1080p and 1080i are 50 Hz / 59.94 Hz. Seamless switching with a black frame. The Anti-Snow function can automatically recover from snow-noise that is a specific symptom of digital signals having HDCP. Mainly, this snow-noise occurs during system startup. Therefore, this function does not work in case of snow-noise has already occurred before input the signal to IDK switchers or bad quality signal transmission. The Connection Reset function can fix these problems without physical cable manipulations. This function can work only in this product's output port, which sometimes will not take effect if another device is between output of this product and display device. Please contact our Sales Division for power consumption information of each configuration.
________________________________________________________________________________________________________________________________________________ ●All specifications and drawings are subject to change without notice. ●Please do not use the supplied AC adapter and power supply cable for other products. ●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●PJLink is a trademark in Japan, the United States, and other countries/regions. ●HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ●The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan ●All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
IDK Corporation FDX-16
Ver.1.1.0 (160520) ■Front & Rear Panel
DIGITAL MATRIX SWITCHER
FDX-16 INPUT SELECT
IN
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
OFF
OUT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5
PRESET LOAD
6
SELECT MODE INPUT
INPUT
7 OUTPUT
8
OUTPUT SELECT
9
1
ALL
10
2
3
4
OUTPUT
SWITCHING MODE
5
6
7
8
V&A
11
VIDEO
AUDIO
MENU/SET
12
9
13 POWER
10
11
12
13
14
15
16
14 15 16 ESC
RS-232C
LAN
AC 100-240V 50/60Hz
BREAKER
OPTION
FG
ALARM
S/N
UPDATE
INPUT
1~4 A
A
B
C
D
A
B
C
D
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
A
B
C
D
A
B
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
D OUTPUT
1~4 A
D
INPUT
5~8 A
D OUTPUT
5~8 A
D
INPUT
9 ~ 12 A
D OUTPUT LINK
A
LINK
HDBaseT
B
LINK
HDBaseT
C
LINK
LINK
HDBaseT
D
A
HDBaseT
LINK
HDBaseT
B
LINK
HDBaseT
C
LINK
HDBaseT
D
9 ~ 12
HDBaseT
A
D
INPUT
13 ~ 16 A
D
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX OUTPUT
A
OPTICAL
B
OPTICAL
C
OPTICAL
D
OPTICAL
A
OPTICAL
B
OPTICAL
C
OPTICAL
D
OPTICAL
13 ~ 16 A
D
________________________________________________________________________________________________________________________________________________ ●All specifications and drawings are subject to change without notice. ●Please do not use the supplied AC adapter and power supply cable for other products. ●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●PJLink is a trademark in Japan, the United States, and other countries/regions. ●HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ●The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan ●All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
IDK Corporation FDX-16
Ver.1.1.0 (160520) Digital Matrix Switcher (Scan converter output board)
FDX-16 Diagram and Features
RoHS ■Diagram
FDX-16
Up to 16 inputs / 4 slot boards
Up to 16outputs / 4 slot boards Digital output slot board 4Outputs / 1 slot board Transmitter Output EQ
Digital Video / Audio HDMI DVI Up to 131 ft. (approx.) / 40 m
HDBaseT output slot board 4 Outputs / 1 slot board Transmitter Digital input slot board 4 Inputs / 1 slot board Input EQ Receiver
Digital Video / Audio HDMI DVI
Up to 330 ft. (approx.) / 100 m
Optical output slot board 4 Outputs / 1 slot board Transmitter
EDID emulation Up to 99 ft. (approx.) / 30 m
HDBaseT input slot board 4 Inputs / 1 slot board Receiver
Digital Video / Audio HDBaseT
Video Audio Matrix Switch
EDID emulation Up to 330 ft. (approx.) / 100 m
Digital video / Audio Optical fiber Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km
Digital scan converter output slot board 2 Outputs / 1 slot board Scan converter
16IN16OUT
Transmitter
Optical input slot board 4 Inputs / 1 slot board Receiver
Digital video / Audio Optical fiber
Digital Video / Audio HDBaseT
Digital Video / Audio HDMI DVI
Output EQ
Up to 131 ft. (approx.) / 40 m
HDBaseT scan converter output slot board
EDID emulation
2 Outputs / 1 slot board
Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km
Scan converter
Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km
Digital Video / Audio HDBaseT
Transmitter
Optical scan converter output slot board
Up to 330 ft. (approx.) / 100 m
2 Outputs / 1 slot board Scan converter Digital video / Audio Optical fiber
Transmitter
Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km
* Input slot board can expand in 4-input unit * Output slot board can expand in 4-input unit * Scan converter output slot board can expand in 4-input unit
Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km
■Ordering code
FDX-16 D4T4MM4SM4-D4T4MM4SM4 ①
②
③
④
⑤
⑥
⑦
⑧
D : Digital input / output slot board DS : Digital scan converter output slot board T : HDBaseT input / output slot board TS : HDBaseT scan converter output slot board MM : Multimode fiber optical input / output slot board MMS : Multimode fiber optical scan converter output slot board
① ② ③ ④
: The number : The number : The number : The number
of digital inputs of HDBaseT inputs of multimode optical inputs of singlemode optical inputs
⑤ ⑥ ⑦ ⑧
: The number : The number : The number : The number
of digital outputs of HDBaseT outputs of multimode optical outputs of singlemode optical outputs
SM : Singlemode fiber optical input / output slot board SMS : Singlemode fiber optical scan converter output slot board LS : Singlemode fiber (6.21 miles / 10 km) optical input / output slot board LSS : Singlemode fiber (6.21 miles / 10 km) optical scan converter output slot board Ex.) 12 inputs 16 outputs: 4 digital inputs / 4 HDBaseT inputs / 4 singlemode optical inputs 4 digital outputs / 4 digital scan converter outputs / 4 HDBaseT outputs / 4 single mode optical outputs
FDX-16 D4T4SM4-D4DS4T4SM4
________________________________________________________________________________________________________________________________________________ ●All specifications and drawings are subject to change without notice. ●Please do not use the supplied AC adapter and power supply cable for other products. ●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●PJLink is a trademark in Japan, the United States, and other countries/regions. ●HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ●The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan ●All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
IDK Corporation FDX-16
Ver.1.1.0 (160520) [Features] ■Video *1 *2 - Up to QWXGA (RB) or 1080p - 4 port slot board type input and output board - Built-in Digital Cable EQ Input: From 33 ft. / 10 m up to 99 ft. / 30 m (approx.) Output: From 33 ft. / 10 m up to 131 ft. / 40 m (approx.) - Extension distance using a Cat6 twisted pair cable (HDBaseT input and output board) Input: Up to 330 ft. / 100 m (approx.) Output: Up to 330 ft. / 100 m (approx.) - Extension distance using fiber optic (Fiber optic extension input and output board) Multimode fiber (OM3): Up to 985 ft. (approx.) / 300 m Multimode fiber (OM4): Up to 3,280 ft. (approx.) / 1 km Singlemode fiber (OS1): Up to 15,420 ft. (approx.) / 4.7 km (Optional: 6.21 miles / 10 km) - Anti-Snow - Customizable input / output numbers by 4 ports or 2 ports input / output slot boards - Unification of the output resolution (scan converter output slot board) ■ Control input - RS-232C, LAN ■ Others - Connection reset - Instant Alert Function for power supply and Fan units - Input, output, and CPU boards can be exchanged without taking off the unit from rack mount - EDID emulation - Audio breakaway enables independent audio and video switching - Preset memory, Last memory, and Startup memory - Front panel security lockout - RS-232C transmission (HDBaseT / Optical output slot boards) * 1. (RB) = Reduced Blanking * 2. Max. resolution for fiber optic extension input and output board are WUXGA (RB)
Video / Audio input Blank period will be happen when FDX switches input cannel. DVI Video / Audio output RS-232C
LAN
AC 100-240V 50/60Hz
BREAKER
OPTION
IN5
IN1
FG
ALARM
S/N
UPDATE
INPUT
1~4 A
A
B
C
D
A
B
C
D
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
D OUTPUT
Desktop PC
1~4 A
HDMI/DVI
D
INPUT
A
5~8 A
HDMI/ DVI
B
C
A
D
B
C
D
D
・・・・・・
OUTPUT
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
5~8
DVI-D(HDMI)
A
D
INPUT
9 ~ 12 A
D OUTPUT LINK
A
LINK
HDBaseT
B
LINK
HDBaseT
C
LINK
LINK
HDBaseT
D
A
HDBaseT
LINK
HDBaseT
B
LINK
HDBaseT
9 ~ 12
LINK
C
HDBaseT
D
HDBaseT
A
D
INPUT
13 ~ 16 A
D
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX OUTPUT
A
B
OPTICAL
C
OPTICAL
D
OPTICAL
A
OPTICAL
B
OPTICAL
C
OPTICAL
D
OPTICAL
13 ~ 16 OPTICAL
A
D
LDC monitor
FDX-16
Blu-ray Player
Video / Audio input
Blank period become shorten DVI
Video / Audio output RS-232C
LAN
AC 100-240V 50/60Hz
BREAKER
OPTION
IN1
IN5
FG
ALARM
S/N
UPDATE
INPUT
1~4 A
A
B
C
D
A
B
C
D
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
D OUTPUT
Desktop PC
1~4 A
D
HDMI/DVI
HDMI/DVI
INPUT
A
5~8 A
HDMI/ DVI
B
C
A
D
B
C
D
D OUTPUT
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
・・・・・・
5~8
DVI-D(HDMI)
A
D
INPUT
9 ~ 12 A
D OUTPUT LINK
A
LINK
HDBaseT
B
LINK
HDBaseT
C
LINK
LINK
HDBaseT
D
A
HDBaseT
LINK
HDBaseT
B
LINK
HDBaseT
LINK
C
HDBaseT
D
9 ~ 12
HDBaseT
A
D
INPUT
13 ~ 16 A
D
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX OUTPUT
A
B
OPTICAL
C
OPTICAL
D
OPTICAL
A
OPTICAL
B
OPTICAL
C
OPTICAL
D
OPTICAL
13 ~ 16
OPTICAL
A
D
Digital frame synchronizer LDC monitor FDX-16
Blu-ray Player
Blank period become shorten
Video / Audio input Video / Audio output
DVI RS-232C
LAN
IN5
IN1
AC 100-240V 50/60Hz
BREAKER
OPTION
FG
ALARM
S/N
UPDATE
INPUT
1~4 A
A
B
C
D
A
B
C
D
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
D OUTPUT
Desktop PC
1~4 A
D
HDMI/DVI
・・・・・・
INPUT
A
5~8 A
HDMI/ DVI
B
C
D
A
B
D OUTPUT
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
DVI-D(HDMI)
5~8
DVI-D(HDMI)
A
D
INPUT
9 ~ 12 A
D OUTPUT LINK
A
LINK
HDBaseT
B
LINK
HDBaseT
C
LINK
HDBaseT
D
LINK
HDBaseT
A
LINK
LINK
HDBaseT
B
HDBaseT
C
LINK
HDBaseT
D
9 ~ 12
HDBaseT
A
D
INPUT
13 ~ 16 A
D
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX
RX
TX OUTPUT
A
OPTICAL
B
OPTICAL
C
OPTICAL
D
OPTICAL
A
OPTICAL
B
OPTICAL
C
OPTICAL
D
OPTICAL
13 ~ 16 A
D
Digital frame synchronizer Blu-ray Player
LDC monitor
FDX-16
Built-in digital frame synchronizer
________________________________________________________________________________________________________________________________________________ ●All specifications and drawings are subject to change without notice. ●Please do not use the supplied AC adapter and power supply cable for other products. ●The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. ●PJLink is a trademark in Japan, the United States, and other countries/regions. ●HDBaseT™ and the HDBaseT Alliance Logo are trademarks of the HDBaseT Alliance. ●The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan ●All other company and product names mentioned in this document are either registered trademarks or trademarks of their respective owners. In this document, the “®” or “™” marks may not be specified.
IDK Corporation FDX-16