Preview only show first 10 pages with watermark. For full document please download

Features

   EMBED


Share

Transcript

4-port 10/100 Mb switch Effective September 2006 New Information Data Communication and Telecommunication Surge Suppression Product Focus Features • State-of-the-art, avalanche diode and thyristor technology • Easy to install, compact, in-line installation • Manufactured in the USA and tested to meet or exceed UL 497 specifications • Protects data and telecommunication lines for virtually any type of network or system including Ethernet, ArcNet, Token Ring, RS232, RS422, Satellite, CATV, CCTV, DDS, T1 AND ISDN applications • Provides affordable, yet superior, equipment protection • Improved reliability and maximized system up-time • Limited lifetime warranty and five year replacement warranty Eaton’s line of data and telecommunication surge suppression products are available for nearly any configuration and offer complete protection for computers and small to large networks, communications devices, phone systems, printers, fax machines and much more. Unwavering protection for sensitive equipment against the threats of damaging surges Wherever uptime is essential, Eaton delivers a comprehensive, single-source power management solution to ensure maximum reliability through the life of your vital applications. Our unique surge protection systems represent a fundamental component of the complete facility solution. Designed to safeguard against harmful and potentially disastrous surges and spikes, our data communication and telecommunication surge suppression solutions protect your equipment from the damage frequently caused by lightning strikes, brownouts, electrical load switching, faulty wiring, downed power lines and more. This unique line was developed to protect against the harmful surges that threaten your telecommunication and data communication circuits providing a complete and reliable surge protection solution. PCCP Series Safeguard sensitive data networks against lightning-induced surges, AC power interference, electrostatic discharge and ground loop energies. PDDP Series Ensure the reliable operation of hubs, bridges, routers, switches and other networked equipment. Specifically designed to provide added security to electronic devices with a remarkably low tolerance for voltage rises or ground loop energies. PMTJ Series Guarantee the reliable operation of devices in a wide variety of environments, and guard sensitive data networks against lightning-induced surges, AC power interference, electrostatic discharge, and ground loop energies. PPCH Series Designed for high-speed data, voice and multimedia applications in structured cabling environments for medium to large-size businesses today, these units incorporate the latest in communication protection technology for mission-critical installations. PRAK Series Whether for a single network concentrator, or an entire relay rack of voltage-sensitive equipment, PRAK Series protectors are one of the most cost-effective and versatile devices of their kind. PSIP Series Ensure the reliable operation of parallel and serial devices such as printers and external modems, point-of-sale terminals, mainframes, dumb terminals, and most other devices using Subminiature D connectors, which are sensitive to destructive transient energies. PTSP Series Guard sensitive data networks against lightning induced surges, AC power interference, electrostatic discharge, and ground loop energies to ensure the reliable operation of networked equipment connected to most communication interfaces. Specifications SERIES PART NUMBER APPLICATION CONNECTOR PRODUCT PHOTO PCCP The PCCP Series of data communication line surge protectors will ensure the reliable operation of coaxial or twinaxial based networked equipment running IBM 3270, AS400, Ethernet, ArcNet, Satellite/Cable/Closed Circuit TV and most other wideband, communication interfaces. PCCP-2DA (EN) Ethernet 10BASE 2 (ThinNet) Coaxial50 Volts PCCP-2DT (EN) Ethernet 10BASE 2 (ThinNet) “T” Tap Coaxial PCCP-2DA-N (EN) M/F Ethernet 10BASE 5 (ThickNet) Coaxial (also avail. F/F) PCCP-CCTV Closed Circuit TV Coaxial PCCP-CMS-M/F Cable TV / Satellite TV Coaxial (also avail. F/F) PCCP-2BM-M/F * AS400/3X Twinaxial Coaxial (also avail. F/F) PDDP The PDDP Series of data communication line protectors will ensure the reliable operation of hubs, bridges, routers, switches and other networked equipment running 10BASE T & 100 BASE T Ethernet, RS422, RS423, RS232, ArcNet, Token Ring, Analog Dial Up, CSU/DSU, DDS, ISDN, T1 and most other communication environments. PDDP-H4-* RJ11 & RJ45 - 4 Ports PDDP-H8-* RJ11 & RJ45 - 8 Ports PDDP-H12-* RJ11 & RJ45 - 12 Ports PDDP-25-* RJ21 25 Pairs (also avail 50 Pairs) PMTJ The PMTJ Series of data communication line protectors for RJ45 and RJ11 interfaces will ensure the reliable operation of Local and Wide Area Networks. We offer protection for LAN interface technologies such as Ethernet 10BASE T & 100BASE T, CAT6/5e/5 Ethernet, 10/100/1000 Base T ,CDDI, 100VG-AnyLan and ATM155. For WAN and Telco applications we offer protection for environments including ISDN, T1, FT1, DDS, analog dial up modems, faxes and more. PMTJ-02*/RJ11 RJ11 (2 Wire) PMTJ-04*/RJ11 RJ11 (4 Wire) PMTJ-06*/RJ11 RJ11 (6 Wire) PMTJ-04*/RJ45 RJ45 (4 Wire) PMTJ-08*/RJ45 RJ45 (8 Wire) PPCH The Category 5 PCH Series 24-Port Protected Patch Panel helps ensure the reliable operation of networked equipment using 100BASE T, ATM155, CDDI and other 100Mhz applications where system availability is absolutely critical. PPCH12-C6 Rackmount - 100BASE T, ATM155, CDDI& 100mHz CAT6/5e/5 110/RJ45 - 12 Ports Rackmount - 100BASE T, ATM155, CDDI& 100mHz 110/RJ45 - 24 Ports PPCH24-C6 PPCH48-C6 Rackmount - 100BASE T, ATM155, CDDI& 100mHz 110/RJ45 - 48 Ports PRAK The PRAK Series of Rackmount and Wall Mount Standoff protectors will ensure the reliable operation of networked equipment connected to 10BASE T & 100BASE T Ethernet, ATM155, CDDI, 100VG-AnyLan, RS422, RS232, Token Ring, Lease Line, ISDN, T1, DDS, Dial-Up and most other communication interfaces. PRAK16-* Rackmount RJ11 & RJ45 - 16 Port PRAK16-*/SO Rackmount RJ11 & RJ45 - 16 Port w/so PRAK32-*/SO Rackmount RJ11 & RJ45 - 32 Port w/so PSIP The PSIP Series of Subminiature D Interface Protectors will ensure the reliable operation of parallel and serial devices such as printers and external modems, point-of-sale terminals, mainframes, dumb terminals and most other devices using subminiature D or Centronics connectors, which are sensitive to destructive transient energies. Standard applications include Ethernet, Token Ring, RS232, RS422 and LAN/WAN interfaces. Special applications can be accommodated through our Custom Products Group. PDB9-RS232 RS232 (also available for RS422 & Token Ring) DB9 PDB15-RS232 RS232 (also available for RS422 & Ethernet AUI) DB15 PDB25-RS232 RS232 (also available for RS422 & Parallel) DB25 (RS232 also available in 4 & 8 wire) PTSP The PTSP Series of Terminal Strip Protectors will ensure the reliable operation of networked equipment connected to Token Ring, RS422, RS232, Short Haul Modems, Muxes, DDS, Analog Dial Up, ISDN, T1 and most other communication interfaces. PTSP-2B-* Hard wire (2 Wire) Also available in 4,6,8, 10 and 32 Wire Additional Products The USB Protector has been designed to address the protection needs of Universal Serial Bus ports. The compact, easy-to-install product design offers “plug and play” capability while advanced, silicon avalanche diode technology provides protection from surge energies, electrostatic discharge and noise components. These fully shielded, high-speed, high energy, self-resetting devices offer mission-critical reliability in the protection of workstations, printers, scanners, digital telco equipment, and a host of other peripherals using either type “A” or type “B” connectivity. The PCMCIA and CATV products incorporate a ground pin for convenient use on AC outlets instead of the traditional green ground wire on other lines. PUSB-A Universal Serial Bus Type “A” PUSB-B Universal Serial Bus Type “B” PCATV Cable TV Coaxial using AC outlet ground PPCMCIA Laptop Modem Protector RJ11 using AC outlet ground * Protectors are available for RS232, RS422, RS423, RS485, RS530, Ethernet, ArcNet, Token Ring, Analog and Digital Telco and most other applications UNITED STATES 8609 Six Forks Road Raleigh, NC 27615 U.S.A. Toll Free: 1.800.356.5794 or 919.872.3020 www.powerware.com Canada Ontario: 416.798.0112 Toll free: 1.800.461.9166 LATIN AMERICA Argentina: 54.11.4343.6323 Brazil: 55.11.3616.8500 México: 52.55.5488.5252 Europe/Middle East/Africa Denmark: 45.3686.7910 Finland: 358.94.52.661 France: 33.1.6012.7400 Germany: 49.7841.666.0 Italy: 39.02.66.04.05.40 Norway: 47.23.03.65.50 Sweden: 46.8.598.940.00 United Kingdom: 44.1753.608.700 Asia Pacific Australia/NZ: 61.2.9693.9366 China: 86.21.6361.5599 HK/Korea/Taiwan: 852.2745.6682 India: 91.11.2649.9414 to 18 Singapore/SEA: 65.6825.1688 Powerware is a trademark of Eaton Corporation. All other trademarks are property of their respective owners. © 2006 Eaton Corporation All Rights Reserved Printed in USA TVSS11FXA December 2006