Features

Transcript

I SERIES Point Source 800 IP8-1153/64 HIGH POWER 15-INCH THREE-WAY 60° x 40° INSTALLATION LOUDSPEAKER FEATURES • Matching ketone polymer MF and HF diaphragms provide uniform sound quality from 500Hz to 20 kHz • M200HP midrange compression driver for signature Community intelligibility and low distortion • FEA-optimized suspensions and neodymium motors with integral demodulation rings in LF and HF • Large rotatable waveguide, user selectable biamp or triamp operation • Innovative low profile modular bracket systems create elegant arrays with simplified installation 39.00" (991mm) TECHNICAL SPECIFICATIONS1 Operating Mode Biamp or Triamp with DSP Operating Environment Indoor Operating Range2 30 Hz to 18.5 kHz Nominal Beamwidth (H x V) 60° x  40°, rotatable waveguide Transducers APPLICATIONS MAIN PA (Small to Medium Size Venues) Houses of Worship · Auditoriums · Restaurants Meeting Rooms · Theaters · Corporate A/V Systems Continuous Power Handling3 @ Nominal Impedance Nominal Sensitivity4 DISTRIBUTED OR FILL (Larger Size Venues) Arenas · Stadiums · Night Clubs · Theaters Themed Entertainment · Larger Houses of Worship DESCRIPTION I SERIES Point Source 800 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of arrayable, rotatable coverage patterns and a comprehensive selection of modular bracket systems that accelerate system design and system commissioning. FEA-optimized linear suspensions, high-flux neodymium motors, and integral demodulation rings ensure precise transducer motion control and very low distortion at high SPL levels. The custom long-excursion LF driver delivers deep bass response and a balanced midrange in the most demanding applications. The matched diaphragms on the HF and MF compression drivers provide natural, transparent sound quality with unrivaled intelligibility and transient response accuracy that complements any source. The rotatable 18-inch (457mm) MF/HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. The acoustic 8th order MF/HF passive crossover produces a smooth, consistent vertical off-axis response free from the polar lobing and power response losses inherent in similar systems. User selectable biamp or triamp operating modes further expand performance capabilities. Nominal Maximum SPL 5 (Whole Space) Equalized Sensitivity6     Equalized Maximum SPL7 Recommended Amplifiers   LF – 1 x 15" (381mm) neodymium motor woofer, 3" (76mm) voice coil, demodulation ring MF - M200HP, 2” exit, ketone polymer diaphragm, compression driver HF – 1 x 1.4" (36mm) exit neodymium compression driver, 2.6" (66mm) voice coil, demodulation ring, ketone polymer diaphragm LF 69V 600W @ 8 ohms (2400W peak) MF 35V   150W @ 8 ohms (600W peak) HF 32V 125W @ 8 ohms (500W peak) MF/HF 47V 275W @ 8 ohms (1100W peak) @ 1W @ 2.83V LF 96 dB 96 dB MF 107 dB 107 dB HF 108 dB 108 dB MF/HF 107 dB 107 dB Peak Continuous LF 130 dB 124 dB MF 135 dB 129 dB HF 135 dB 129 dB MF/HF 137 dB 131 dB System @ 1W @ 2.83V 93 dB 93 dB System Peak Continuous 127 dB 121 dB LF 600W - 1200W @ 8 ohms, (69V - 98V) MF 150W - 300W @ 8 ohms, (35V - 49V) HF 125W - 250W @ 8 ohms (32V - 45V) MF/HF 275W - 550W @ 8 ohms, (47V - 66V) PHYSICAL Input Connection (2) Screw terminal blocks (6-position) Mounting Points (15) M10 threaded rigging points Environmental IPX4 per IEC 60529 , designed in accordance with MIL-STD-810G Dimensions/Weight/Finish Refer to the Technical Drawing OPTIONS Accessories (Refer to Accessory Guide for complete listing) Rigging kits include: BFR22: BalancePoint™ Fly Rails; IUB1153: U-Bracket; IVY1153: Vertical Yoke; IAF55: Isometric Array Frame; VAB-BFR38: Sub Above Vert Array; HAB3-BFR38: Sub/Dual 3-Way Horiz Array; HSB3/VSB3: Multiple Splay Brackets for Horiz/Vert Arrays with Sub Behind options; DFS: Downfill Splay Kit; DVS-BFR22: Dual Vert Splay Kit with BalancePoint™ Fly Rails; TPK: Tight Pack Kit Configure-to-Order (CTO) Custom color Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice. I SERIES Point Source 800 IP8-1153/64 HIGH POWER 15-INCH THREE-WAY 60° x 40° INSTALLATION LOUDSPEAKER AXIAL PROCESSED RESPONSE (dB)8 HORIZONTAL OFF-AXISOff-Axis RESPONSE (dB)10 Horizontal Frequency Response ALL (Axially Processed) (dB) 120 120 110 110 100 100 90 90 80 80 10 Half Space LF MF Series1 HF Amplitude (dB SPL) Passive 20 100 100 1000 1000 Frequency (Hz) 10000 10000 Amplitude (dB SPL) LF LF_NP 100 100 90 90 80 80 70 70 10 110 100 100 100 100 90 90 90 90 80 80 110 80 20 10 100 100 1000 1000 Frequency (Hz) Frequency (Hz) 10000 100 100 10 LF MF MF Mid-HF MF/HF 1 10 20 Half-space 20 10 1000 Frequency (Hz) Mag [dB] (10°) Mag [dB] (40°) Mag [dB] (30°) 0° 100 100 Half Space Mag [dB] (20°) HF HF 100 100 10000 10000 1000 1000 Frequency (Hz) Frequency (Hz) 10° 20° 30° 40° 10000 10000 1000 1000 Frequency (Hz) (down) (dB)10 VERTICAL OFF-AXIS Off-Axis DOWNVertical RESPONSE 10 1 Mag [dB] (10°) Mag40° [dB] (40°) 70 70 10000 IMPEDANCE (Ohms) Component Impedance LF 100 100 Mag [dB] (20°) BiHF‐MF_np 110 120 20 30° Space Mag [dB] (0°) (dB)10 VERTICALHalfOFF-AXIS UP RESPONSE 110 120 80 Impedance (Ohms) 110 (30°) 10° Mag [dB]20° Off-Axis Vertical (up) 9 AXIAL SENSITIVITY (dBAxial SPL) Unprocessed Sensitivity (dB SPL) Half Space Half Space MF/HF 110 Mag [dB] (0°) Mag [dB] (20°) 0° Half-space 1000 10000 110 110 100 100 90 90 80 80 70 70 10 10000 Half-space 20 0° 100 100 Frequency (Hz)ohms @ 1800 Hz, Min Impedance: (LF) 6.8 ohms @ 40Hz, (MF) 9.9 10° Mag [dB] (0°) Mag [dB] (30°) 20° 30° Mag [dB] (10°) Mag [dB] (40°) 40° 10000 10000 1000 1000 Frequency (Hz) (MF/HF) 6 ohms @ 5000 Hz, (HF) 8.1 ohms @ 3150 Hz 12 BEAMWIDTH (Degrees) Beamwidth (Degrees) DIRECTIVITY INDEX (dB)11 Directivity Index 40 40 30 30 100 20 20 10 10 0 0 10 Horizontal 360 20 100 100 1000 Frequency (Hz) 1000 10000 10000 BeamH Vertical BeamV 100 10 10 10 20 100 100 1000 Frequency (Hz) 1000 10000 10000 I SERIES Point Source 800 IP8-1153/64 HIGH POWER 15-INCH THREE-WAY 60° x 40° INSTALLATION LOUDSPEAKER HORIZONTAL POLAR DATA (30dB Scale, 6dB per major division) 90° left 135° -6 45° 0° front 180° back 90° left — 100 Hz — 125 Hz — 160 Hz — 200 Hz 135° 0° front 45° 0° front 180° back 135° 45° -90° right -45° 90° left — 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz 135° -6 45° — 10000 Hz — 12500 Hz — 16000 Hz 0° front 180° back -45° -135° — 630 Hz — 800 Hz — 1000 Hz — 1250 Hz 0° front -135° 0° front 180° back -45° -135° -6 45° -90° right 90° left — 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz -6 180° back -90° right 90° left -6 135° -45° -135° -90° right 135° 45° 180° back -45° -135° -6 90° left — 250 Hz — 315 Hz — 400 Hz — 500 Hz -45° -135° -90° right -90° right VERTICAL POLAR DATA (30dB Scale, 6dB per major division) 90° up 135° -6 45° 0° front 180° back 90° up — 100 Hz — 125 Hz — 160 Hz — 200 Hz 135° 0° front 45° 0° front 180° back -45° -135° -90° down 135° -6 45° -45° -90° down — 630 Hz — 800 Hz — 1000 Hz — 1250 Hz 0° front -45° -135° 90° up — 4000 Hz — 5000 Hz — 6300 Hz — 8000 Hz 0° front 180° back -135° 45° -90° down 90° up — 1600 Hz — 2000 Hz — 2500 Hz — 3150 Hz -6 180° back -90° down 90° left -6 135° -45° -135° -90° up 135° 45° 180° back -45° -135° -6 90° up — 250 Hz — 315 Hz — 400 Hz — 500 Hz 135° -6 45° — 10000 Hz — 12500 Hz — 16000 Hz 0° front 180° back -45° -135° -90° down A B C 30° 7 6 22.10" [561.3] 1. SYMBOL INDICATES COG. 2. SYMBOL INDICATES MOUNTING POINT, M10 THREADED HOLE. 3. DRAWING REPRESENTATIVE OF IP8-1153/64, IP8-1153/66, IP8-1153/94. 4. WEIGHT: LOUDSPEAKER ONLY: 104 LBS. (47.2KG) NOTES: FRONT GRILLE PARTIALLY SHOWN 39.00" [990.6] 19.75" [501.7] 6 5 TOP/BOTTOM 1.38" [35.0] 16.50" [419.1] 4.71" [119.6] INPUT 1.38" [35.0] REV 4 REVISIONS DESCRIPTION CL DATE BACK 9.30" [236.2] TSC 16.74" [425.2] 16.52" [419.7] CL 1.38" [35.0] 14.50" [368.3] NOT TO SCALE 16.52" [419.7] 4 19.65" [499.1] 7.06" [179.2] 36.24" [920.6] 1.38" [35.0] 15.30" [388.5] 26.30" [668.1] SIDES 5 1.38" [35.0] 3 DO NOT SCALE DRAWING THIRD ANGLE PROJECTION ALL DIMENSIONS IN in/mm U.O.S. TSC = THEORETICAL SHARP CORNER DIMENSIONS ACROSS CENTERLINES TO BE SYMMETRICAL METRIC: ±0.5mm TOLERANCES ON ALL DIMENSIONS UNLESS OTHERWISE NOTED TO BE: ANGLES: ±.5° DECIMALS: ±.03" 4.26" [108.1] 36.24" [920.6] 3 Enclosure / Finish Black (RAL#9004) or White (RAL#9003) low gloss, uniformly textured painted 15mm Baltic Birch plywood NONE IP8-1153-2D I SERIES IP8-1153 SHEET 0 1 OF 1 REV www.communitypro.com COMMUNITY PROFESSIONAL LOUDSPEAKERS 333 E FIFTH ST. CHESTER, PA 19013-4511 USA TEL: (610)876-3400 FAX: (610)874-0190 1 2 1 THIS DRAWING HAS BEEN FURNISHED BY COMMUNITY LIGHT & SOUND, INC. THE INFORMATION AND KNOW-HOW THEREON MAY NOT BE USED NOR THE DRAWING REPRODUCED WITHOUT THE WRITTEN PERMISSION OF COMMUNITY. ALL REPRODUCTIONS WHOLE OR IN PART, INCLUDING VENDOR'S SHOP DRAWINGS SHALL BEAR OR REFER TO THIS STAMP. SCALE DWG NO. DRAWING TITLE 2 Grille: Powder-coated perforated steel backed with color-matched acoustically transparent woven fabric. Black (RAL#9005) or White (RAL#9003) A B C D E IP8-1153/64 D E 7 Shipping Weight 124 lbs (56.2 kg) Unit Weight 105 lbs (47.6 kg) loudspeaker only HxWxD 39.00" x 22.10" x 26.30" (991 x 561 x 668 mm) TECHNICAL DRAWING / DIMENSIONS / FINISH I SERIES Point Source 800 HIGH POWER 15-INCH THREE-WAY 60° x 40° INSTALLATION LOUDSPEAKER I SERIES Point Source 800 IP8-1153/64 HIGH POWER 15-INCH THREE-WAY 60° x 40° INSTALLATION LOUDSPEAKER CONNECTION DIAGRAMS INPUT PANEL HF +/– HF/MF Amp Crossover HF/MF Input DSP MF +/– LF Amp LF Input LF Three-way biamp +/– HF Amp DSP HF HF Input MF +/– MF Amp MF Input LF +/– LF Amp LF Input Three-way triamp Three-way input panel NOTES 1. PERFORMANCE SPECIFICATIONS All measurements are taken indoor using a time-windowed and processed signal to eliminate room effects, approximating an anechoic environment, a distance of 6.0 m. All acoustic specifications are rounded to the nearest whole number. An external DSP with settings provided by Community Professional Loudspeakers is required to achieve the specified performance; further performance gains can be realized using Community’s dSPEC226 loudspeaker processor with FIR power response optimization. 2. OPERATING RANGE The frequency range in which the on-axis processed response remains within 10dB of the average SPL. 3. CONTINUOUS POWER HANDLING Maximum continuous input voltage (and the equivalent power rating, in watts, at the stated nominal impedance) that the system can withstand, without damage, for a period of 2 hours using an EIA-426-B defined spectrum; with recommended signal processing and protection filters. 4. NOMINAL SENSITIVITY Averaged SPL over the operating range with an input voltage that would produce 1 Watt at the nominal impedance and the averaged SPL over the operating range with a fixed input voltage of 2.83V, respectively; swept sine wave axial measurements with no external processing applied in whole space, except where indicated. Community Professional Loudspeakers 333 East Fifth Street, Chester, PA 19013-4511 USA Phone (610) 876-3400 • Fax (610) 874-0190 communitypro.com • [email protected] 5. NOMINAL MAXIMUM SPL Calculated based on nominal / peak power handling, respectively, and nominal sensitivity; exclusive of power compression. 6. EQUALIZED SENSITIVITY The respective SPL levels produced when an EIA-426-B signal is applied to the equalized loudspeaker system at a level which produces a total power of 1 Watt , in sum, to the loudspeaker subsections and also at a level which produces a total voltage, in sum, of 2.83V to the loudspeaker subsections, respectively; each referenced to a distance of 1 meter. 7. EQUALIZED MAXIMUM SPL The SPL produced when an EIA-426-B signal is applied to the equalized loudspeaker system, at a level which drives at least one subsection to its rated continuous input voltage limit, referenced to a distance of 1 meter. The peak SPL represents the 2:1 (6dB) crest factor of the EIA-426-B test signal. 8. AXIAL PROCESSED RESPONSE The on-axis variation in acoustic output level with frequency of the complete loudspeaker system with recommended signal processing applied. 1/6 octave Gaussian smoothing applied. 9. AXIAL SENSITIVITY The on-axis variation in acoustic output level with frequency for a 1 Watt swept sine wave, referenced to 1 meter with no signal processing. 1/6 octave Gaussian smoothing applied. 10. HORIZONTAL / VERTICAL OFF-AXIS RESPONSES The loudspeaker’s magnitude response at various angles off-axis, with recommended signal processing applied in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied. 11. DIRECTIVITY INDEX The ratio of the on-axis SPL squared to the mean squared SPL at the same distance for all points within the measurement sphere for each given frequency; expressed in dB. 1/6 octave Gaussian smoothing applied. 12. BEAMWIDTH The angle between the -6dB points in the polar response of the loudspeaker when driven in the operating mode which utilizes the largest number of individually amplified pass bands. 1/6 octave Gaussian smoothing applied. Data presented on this spec sheet represents a selection of the basic performance specifications for the model. These specifications are intended to allow the user to perform a fair, straightforward evaluation and comparison with other loudspeaker spec sheets. For a detailed analysis of this loudspeaker’s performance, please download the GLL file and/or the CLF file from our website: communitypro.com CAUTION: Installation of loudspeakers should only be performed by trained and qualified personnel. It is strongly recommended that a licensed and certified professional structural engineer approve the mounting design. IP8-1153/64 [17FEB2015]