Transcript
iDS6W
www.iS5com.com
Intelligent 4 Port RS-232/422/485 to 2 Port Ethernet IEEE 802.11 b/g Wireless Device Server
Features ââ
WLAN interface supports up to 54Mbps link speed
ââ
Modes of Operation: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
ââ
Redundant multiple host devices: host devices: Virtual COM, TCP Server, TCP Client mode, IP ranges: UDP
ââ
NAT Pass-Through: Manageable through NAT router
ââ
High Security Capability: • SSL data encryption • Secured management by HTTPS and SSH • IP Access: IP White List • Wireless: WEP/WPA/WPA2/802.1X/TKIP
ââ
Internet Communication: PPPoE authentication
ââ
Update DNS Hostname: DDNS
ââ
Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
ââ
Supports Daisy Chain
ââ
Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
ââ
iDS Manager software supports centralized management and configurable by Web-based, Windows NT/2000/XP/2003/VISTA/7
iS5com.com
Tel: +905-670-0004 Fax: +289-401-5206 Email:
[email protected]
#3-7490 Pacific Circle, Mississauga, Ontario, L5T 2A3 All specifications are subject to change without notice.
IS5 REV.06102016
Page—1
Introduction The iDS6W is an intelligent secure 4-port RS-232/422/485 to 802.11b/g WLAN, with speeds up to 54Mbps, and a 2 port Ethernet LAN device server. It supports the standard features, such as a TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the iDS Manager software utility allows the configuration of multiple devices and mappings of Virtual Com. The NAT Router Pass-Through features, DDNS, and PPPoE, making it convenient for administrators to configure the device servers remotely through the NAT router from different IP domains or via the Internet. The iDS6W can simultaneously transfer data to 5 redundant host PC’s to avoid Ethernet connectivity breakdown or any host PC failures. The iDS6W supports security features such as HTTPS, SSH, SSL encryption, and 802.1X to assuring secure data transmission. The iDS6W provides dual redundant power inputs; 10-48VDC, 36-72VDC, or a universal 88-370VDC/85264VAC with a single 10-48VDC backup for continuous operation, and a wide operating temperature, -40°C to +85°C, in an IP-40 housing. The iDS6W is the best suited where the high demand for secure serial to WLAN critical data communication is required in the harshest of environments.
Specifications Model Number iDS6W Physical Ports 10/100Base-T(X) RJ45 Ports Auto MDI/MDIX
2
RS-232/RS-422/RS-485 Serial Ports in DB9
4
WLAN Feature Operating Mode
RS-232 / RS-422 / 4(2)-Wire RS-485 - Can be configured by the Windows configuration utility
Antenna and Connector
2dBi antenna on reversed SMA connector
Radio Frequency Type
DSSS, OFDM
Modulation
IEEE802.11b : CCK, DQPSK, DBPSK IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band
America/FCC : 2.412~2.462 GHz (11 channels) Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
Transmission Rate
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power
IEEE802.11b/g : 18dBm
Receiver Sensitivity
-81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps, PER< 10%
Encryption Security
WEP : (64-bit ,128-bit key supported) WPA /WPA2 : IEEE802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) TKIP encryption 802.1x Authentication supported
Serial Ports Operation Mode
RS-232 / RS-422 / 4(2)-Wire RS-485 - Can be configured by the Windows configuration utility
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
All specifications are subject to change without notice |
IS5 REV.06102016
www.iS5com.com | Page—2
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
Network Features Network Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
Power Input Power
Dual DC Inputs 10-48VDC, Single Input 36-72VDC with Single 10-48VDC Backup, or Single Input universal supply 288-370VDC or 85-264VAC with a Single 10-48VDC Backup
Power Consumption (Typ.)
6.5 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristics Enclosure
IP-40 Galvanized Steel
Dimension (W x D x H)
101.8 (W) x 116.2 (D) x 154.1 (H) mm (4.01 x 4.57 x 6.07 inches)
Weight (g)
~2500 g
Environmental Storage Temperature
-40°C to +85°C (-40°F to +185°F)
Operating Temperature
-40°C to +85°C (-40°F to +185°F) No Fans
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty Warranty
5 Years
All specifications are subject to change without notice |
IS5 REV.06102016
www.iS5com.com | Page—3
Dimensions All Dimensions are in Inches
Ordering Information Base
Power Supply
Mount
Ethernet Port 1
Ethernet Port 2
Serial Port 3-6
iDS6W
LV
D
1RJ45
1RJ45
4DB09
iDS6W
|
|
|
|
|
Core assembly and packaging
LV
|
|
|
|
Dual Input (10-48VDC)
MV
|
|
|
|
Single Input (36-72VDC) with Single 10-48VDC Backup
HV
|
|
|
|
Single Input 88-370VDC or 85-264VAC with Single 10-48VDC Backup
D
|
|
|
DIN Rail Mounting
P
|
|
|
Panel Mounting
N
|
|
|
No Mounting Hardware
1RJ45
1RJ45
|
1 X 10/100Base-T(X) RJ45
4DB09
4 X RS232/422/485 DB9
Example Order Code: Description:
Description
iDS6W-LV-D-1RJ45-1RJ45-4DB09-C1-F3.07 6 Port Device Server, (Power Supply) Dual Input (10-48VDC), DIN Rail Mounting, 1 x 10/100Base-T(X) RJ45 Port, 1 x 10/100Base-T(X) RJ45 Port, 4 x RS232/422/485 DB9 Serial Ports, Conformal Coating, Firmware version 3.07 C1 – Add for conformal coating FW – Leave blank for latest firmware
All specifications are subject to change without notice |
IS5 REV.06102016
www.iS5com.com | Page—4
