Features Operation Instructions (li

Transcript

RM-17 UNIVERSAL BATTERY CHARGER Thank you for purchasing the most innovative Universal Charger in the prevailing market. FEATURES • Compact and lightweight design makes it ideal for travel • Compatible with most 1.2V, 3.6-3.7V, 7.2-7.4V digital camera, camcorder & mobile phone Li-ion battery packs, or Ni-MH/Ni-Cad AA/AAA (RO-6/RO-3) batteries • LCD display indicates charging mode and status • Charges up to 4 Ni-MH/Ni-Cad AA/AAA (R0-6 / R0-3) • Charges USB powered devices via USB port (image 5) • Charger automatically identifies the correct voltage and polarity of the battery • Automatic shut off • Car charger cord included OPERATION INSTRUCTIONS (Li-ion Battery Packs) 1. Plug the external adaptor in AC wall outlet after connecting to charger 2. Place Li-ion battery pack on the base (image 1) 3. Move the contact needles (located underneath the charger) up and/or down to align with the “+” and “-” contacts on the battery (image 2). The charger will automatically detect “+” and “-” (polarity). 4. After adjusting to be correct position, vertically straighten battery (image 3) 5. LCD bar will flash during charging 6. LCD display will show full segment when fully charged 7. Unplug the adaptor after charging OPERATION INSTRUCTIONS (AA/AAA Ni-MH/Ni-Cad Batteries) 1. Plug the external adaptor in AC wall outlet after connecting to charger 2. Place Ni-MH/Ni-Cad AA/AAA on the base in correct position (image 4) 4. LCD bar will flash during charging 5. LCD display will show full segment when fully charged 6. Unplug the adaptor after charging 7. The length of each AA/AAA should be the same if charging 4 batteries together IMPORTANT SAFETY INSTRUCTIONS 1. Before using this charger, read the instructions carefully 2. This charger is intended for use with Li-ion and Ni-MH/Ni-Cad rechargeable batteries only. Attempting to charge any other types of batteries will cause personal injury and damage to the charger 3. Do not expose the charger or adapters to rain or moisture. Designed and intended for indoor use only 4. Always unplug the charger when not in use 5. Do not operate the charger if it has been subject to shock or damage. If subjected to shock or damage have it serviced by a qualified service technician 6. Do not disassemble the charger. Incorrect reassembly may result in a risk of electrical shock or fire 7. Unplug the charger from an outlet before attempting maintenance or cleaning 8. Li-ion battery packs and Ni-MH/Ni-Cad can’t be charged together 9. Store the charger in a cool and dry place when not in use. Keep away from children and infirm persons TROUBLE SHOOTING - LCD DISPLAY 1. EP: No battery on the charger 2. CH: Charging mode 3. FU: Full charge 4. EE: ERROR (False or Defective Battery) 5. For charging 7.2V/7.4V battery pack, display would show two charging bars (image 6) SPECIFICATIONS - Input: DC 12V 1000mA - Output Current: Max 1000mA - Dimension: 140(l) X 72(w) X 25(h) mm The manufacturer does not accept responsibility for any personal loss and/or injury if the defect was caused by misuse or mishandling by the user. image 1. image 4. contact needles image 2. image 3. image 5. image 6.