Federal Signal Pdf Index

Transcript

245_266_62362_FedSig.qxd 1/27/08 11:21 AM Page 252 FEDERAL SIGNAL CORPORATION AudioMaster ® Light Duty Two-Way Intercom Model 310LD-MV Federal Signal’s AudioMaster® light-duty industrial intercom provides reliable two-way communications and superior sound quality. A LIGHT-DUTY TWO-WAY INTERCOM WITH SUPERIOR SOUND QUALITY • Multi-voltage design accepts 24VDC, 120VAC and 240VAC • Balanced line output • Gain control • Remote device activation • TYPE 1, IP10 enclosure • UL Listed and CSA Certified The AudioMaster 310LD-MV's standard features include internal volume control, balanced line output, Type 1 wall mount housing, integrated call/listen/talk switch, remote device activation, and the ability to power another intercom at 24VDC. 310LD-MV operates from -31°F to 150°F (-35°C to 66°C) for indoor applications. An integrated remote device activation feature allows you to activate an auxiliary signal such as a horn or light. The AudioMaster 310LD-MV requires 24VDC, 120VAC or 240VAC to power each unit. The intercom is easy to operate. Press the switch down to talk and release to listen. The AudioMaster Model 310LD-MV is UL Listed and CSA Certified. The Model 310LD-MV is deal for office environments and other dry, non-hazardous locations or anywhere reliable twoway communication is important for a safe efficient operation. Model Voltage Operating Current Standby Current Frequency Response (-6dB) Input Impedance 310LD-MV 24VDC 120mA 60mA 150Hz-12KHz 3400 ohms 120VAC 50/60Hz 80mA 60mA 150Hz-12KHz 3400 ohms 240VAC 50/60Hz 40mA 30mA 150Hz-12KHz 3400 ohms 5 yyr WA RRANT Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:21 AM Page 253 LIGHT DUTY TWO-WAY INTERCOM (310LD-MV) 6.88"/174.8 mm 3.02"/ 76.7 mm 8"/203.2 mm AudioMaster® CALL LISTEN TALK FEDERAL SIGNAL CORPORATION UNIVERSITY PARK, IL USA WARNING: DISCONNECT POWER BEFORE REMOVING COVER S P E C I F I C AT I O N S Speaker Rating: Operating Temperature: Net. Weight: Shipping Weight: Height: Width: Depth: HOW TO ORDER 2-watts -31°F to 150°F 3.2 lbs 3.9 lbs. 8.0" 6.88" 3.02" 2-watts -35°C to 66°C 1.45 kg 1.77 kg 203.2 mm 174.8 mm 76.7 mm • Specify model number • Please refer to Model Number Index 310LD-MV beginning on page 381 R E P L A C E M E N T PA RT S Description Part Number PC Board Assembly Resistor, 1K, 1W Fuses — F1, 250V Switch 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 K2001290B K101216A K144A125A K122283A Fax: 708.534.4852 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:19 AM Page 246 FEDERAL SIGNAL CORPORATION AudioMaster ® Two-Way Intercom Model 310-MV TWO-WAY INTERCOM WITH SUPERIOR SOUND QUALITY • Multi-voltage design accepts 24VDC and 120VAC/240VAC • Heavy-duty industrial intercom for indoor or outdoor applications • Balanced line output • Type 4X, IP56 enclosure • UL Listed, CSA Certified and Marine Listed Federal Signal’s AudioMaster® 310-MV is an industrial intercom that provides reliable two-way communications and superior sound quality. This unit has a rugged Type 4X housing and is UL Listed and CSA Certified. The AudioMaster 310-MV's standard features include volume control, call button, balanced line output, dust- and water-tight housing, listen/talk switch, remote device activation and the ability to power another intercom at 24VDC. This heavy duty intercom will operate from -31°F to 150°F (-35°C to 66°C) in both indoor and outdoor applications. Remote device activation allows you to activate an auxiliary signal such as a horn or light. The AudioMaster 310-MV requires 24VDC, 120VAC or 240VAC to power each unit. The intercom is easy to operate. Press the switch down to talk and release to listen. The 310-MV is ideal for use at oil refineries, petrochemical plants, offshore platforms, pulp and paper mills, water treatment facilities, airports, shipyards or anywhere reliable two-way communication is important for safe and efficient operation. Model Voltage Operating Current Standby Current Frequency Response (-6dB) Input Impedance 310-MV 24VDC 260mA 62mA 150Hz-12KHz 3400 ohms 120VAC 50/60Hz 163mA 70mA 150Hz-12KHz 3400 ohms 240VAC 50/60Hz 82mA 35mA 150Hz-12KHz 3400 ohms 5 yyr WA RRANT Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/1/08 3:25 PM Page 247 TWO-WAY INDUSTRIAL INTERCOM (310-MV) Speaker/Microphone 9.88"/ 251 mm Volume Control TM r TE ste LIS Ma V dio 31 Au MODEL N 0-M E M LU VO ALL C 5"/ 127 mm G: Listen/Talk Switch N CO DIS K L TA N TIO RA . PO .A R OR U.S VE L C IL. CO , NA G IG ARK VIN P LS MO RA SITY E E D R ER FE IVE OR F N E U RB WE PO CT NE NIN R WA 6.5"/ 165.1 mm Call Button S P E C I F I C AT I O N S Speaker Rating: Operating Temperature: Net Weight: Shipping Weight: Height: Width Depth: HOW TO ORDER 30-watts -31°F to 150°F 9.9 lbs. 11.5 lbs. 9.88" 6.5" 5.0" 30-watts -35°C to 66°C 4.5 kg 5.2 kg 251.0 mm 165.1 mm 127.0 mm • Specify model number • Specify options: Slave Kit (K8502017A) • Please refer to Model Number Index 310-MV beginning on page 380 R E P L A C E M E N T PA RT S Description PC Board Assembly Connector, 10 pin Resistor, 1K, 1W Fuse 250V, 1/2 Amp Fuse 250V, 1 Amp Part Number K2001915B K140A326A-01 K101216A K148A155A K148A155A-01 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Part Number Kit, potentiometer Kit, toggle switch Kit, call button and boot Permanent Slave Kit Gasket, rubber Fax: 708.534.4852 K8590237A K8590298A K8590241A K8502017A K8590013B www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/12/08 1:45 AM Page 250 FEDERAL SIGNAL CORPORATION AudioMaster ® Two-way Intercom with Noise Canceling Microphone Model 310-MV-MNC Federal Signal’s AudioMaster® 310-MV-MNC is a two-way industrial intercom that provides reliable communications and superior sound quality. INTERCOM FOR HIGH AMBIENT NOISE ENVIRONMENTS The AudioMaster 310-MV-MNC's standard features include volume control, call button, balanced line output, listen/talk switch, remote device activation, and the ability to power another intercom at 24VDC. • Multi-voltage design accepts 24VDC, 120VAC and 240VAC • Heavy-duty industrial intercom • Noise canceling microphone • Balanced line output • Type 3R enclosure • UL Listed, CSA Certified and Marine Listed This heavy duty intercom will operate from -31°F to 150°F (-35°C to 66°C). The remote device activation feature allows you to activate an auxiliary signal such as a horn or light. The AudioMaster 310-MV-MNC requires 24VDC, 120VAC or 240VAC to power each unit. The intercom is easy to operate. Press the switch down to talk and release to listen. When the ambient noise level is too high for the standard 310-MV integrated microphone, the 310-MV-MNC noise canceling unit is used to improve transmission quality. The 310-MV-MNC is ideal for use at oil refineries, petrochemical plants, offshore platforms, pulp and paper mills, water treatment facilities, airports, shipyards or anywhere reliable two-way communication is important for safe, efficient operation. Model Voltage Operating Current Standby Current Frequency Input Response (-6dB) Impedance 310-MV-MNC 24VDC 260mA 62mA 150Hz-12KHz 3400 ohms 120VAC 50/60Hz 163mA 70mA 150Hz-12KHz 3400 ohms 240VAC 50/60Hz 82mA 35mA 150Hz-12KHz 3400 ohms 5 yyr WA RRANT Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/1/08 3:29 PM Page 251 TWO-WAY INDUSTRIAL INTERCOM (310-MV-MNC) Speaker 9.88" 251 mm TM r TEN ste LIS Ma0-012 C o i D d 31 V Au MODE:L12/24 LK S LT VO ME LU VO ALL C 5"/ 127 mm G: IN RN WA Listen/Talk Switch TA N TIO RA PO .A. R OR U.S VE L C IL. CO NA K, G VIN SIG PAR Y AL MO ER RSIT RE D E R FE IVE FO UN BE ER OW TP EC NN CO DIS Call Button Volume Control S P E C I F I C AT I O N S Speaker Rating: Operating Temperature: Net Weight: Shipping Weight: Height: Width Depth: HOW TO ORDER 30-watts -31°F to 150°F 10.1 lbs. 12.0 lbs. 9.88" 6.5" 5.0" 30-watts -35°C to 66°C 4.6 kg 5.4 kg 251.0 mm 165.1 mm 127.0 mm • Specify model number • Please refer to Model Number Index 310-MV-MNC beginning on page 380 R E P L A C E M E N T PA RT S Description PC Board Assembly Connector Fuse 250V, 1/2 Amp Fuse 250V. 1 Amp Microphone Part Number K2001915B K140A326A-01 K148A155A K148A155A-01 MNC-MC 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Part Number Kit, potentiometer Kit, toggle switch Kit, call button and boot Resistors, 1K, 1W Gasket, rubber Fax: 708.534.4852 K8590237A K8590298A K8590241A K101216A K8590013B www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:19 AM Page 248 FEDERAL SIGNAL CORPORATION AudioMaster ® Hazardous Location Two-way Intercom Model 310X-MV Federal Signal’s AudioMaster® 310X-MV is a two-way industrial intercom that provides reliable communications and superior sound quality. This unit has a rugged Type 4X housing and is rated for Class I, Division 2, Groups A, B, C, & D; Class II, Division 2, Groups F & G; and Class III. INTERCOM FOR HIGH AMBIENT NOISE ENVIRONMENTS • Multi-voltage design accepts 24VDC, 120VAC and 240VAC • Heavy-duty industrial intercom for indoor or outdoor applications • Balanced line output • Rated for Class I, Division 2 • Type 4X, IP65 enclosure • UL and cUL Listed, CSA Certified and Marine Listed The AudioMaster 310X-MV's standard features include volume control, call button, balanced line output, dust- and water-tight housing, listen/talk switch, remote device activation, and the ability to power another intercom at 24VDC. This heavy duty intercom will operate from -31°F to 150°F (-35°C to 66°C) for both indoor and outdoor applications. Remote device activation allows you to activate an auxiliary signal such as a horn or light. The AudioMaster 310X-MV requires 24VDC, 120VAC or 240VAC to power each unit. The intercom is easy to operate. Press the switch down to talk and release to listen. The AudioMaster is UL Listed and CSA Certified. The 310X-MV is ideal for use at oil refineries, petrochemical plants, offshore platforms, pulp and paper mills, water treatment facilities, airports, shipyards or anywhere reliable two-way communication is important for safe and efficient operation. Model Voltage Operating Current Standby Current Frequency Response (-6dB) Input Impedance 310X-MV 24VDC 260mA 62mA 150Hz-12KHz 3400 ohms 120VAC 50/60Hz 163mA 70mA 150Hz-12KHz 3400 ohms 240VAC 50/60Hz 82mA 35mA 150Hz-12KHz 3400 ohms 5 yyr WA RRANT Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/7/08 3:46 PM Page 249 TWO-WAY INDUSTRIAL INTERCOM (310X-MV) Speaker/Microphone 9.88"/ 251 mm Volume Control TM r TEN ste LIS Ma0-MV o i d 31 Au MODEL LK TA N TIO RA . PO .A R OR U.S VE . LC CO NA K, IL G VIN SIG PAR AL Y MO ER RSIT RE D E R FE IVE FO UN BE ER OW TP EC NN CO DIS G: IN N R WA Listen/Talk Switch ME LU VO ALL C 5"/ 127 mm 6.5"/ 165.1 mm Call Button S P E C I F I C AT I O N S Speaker Rating: Operating Temperature: Net Weight: Shipping Weight: Height: Width Depth: HOW TO ORDER 30-watts -31°F to 150°F 10.1 lbs. 12.0 lbs. 9.88" 6.5" 5.0" 30-watts -35°C to 66°C 4.6 kg 5.4 kg 251.0 mm 165.1 mm 127.0 mm • Specify model number • Please refer to Model Number Index 310X-MV beginning on page 380 R E P L A C E M E N T PA RT S Description PC Board Assembly Connector, 10 Pin Resistors, 1K, 1W Fuse 250V, 1/2 Amp Gasket, rubber Part Number K2001915B-02 K140A326A-01 K101216A K148A155A K8590013B 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Part Number Kit, potentiometer Kit, toggle switch Kit, call button and boot Fuse 250V, 1 Amp Fax: 708.534.4852 K8590237A K8590298A K8590241A K148A155A-01 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/12/08 12:28 AM Page 264 FEDERAL SIGNAL CORPORATION ECHO Digital Intercom System VOICE COMMUNICATION SYSTEM FOR IN-PLANT USE • Up to 9072 field stations • Addressable intercom control with auto conference • Public address, general alarm and intercom • PBX and radio interface • Ordinary location, hazardous area and weatherproof stations • Supervised fault diagnostics • Fiber optic ready • Field programmable • Pre-recorded messages • Alarm functions • Networkable and expandable • Windows® based software • Ambient noise monitoring / volume tracking ECHO digital intercom and communication systems provide addressable intercom, public address, general alarm, paging and telecommunication capabilities. A single ECHO system can provide the same level of safety, coverage and reliability normally achieved with multiple systems. ECHO interfaces simply with a variety of third-party equipment, including fire and gas detection systems, auxiliary security systems and signals, PA/GA systems, two-way radios and telephone PBX. ECHO accepts multiple input sources for tones, pre-recorded voice messages, and background music. ECHO enables you to integrate all of your critical life safety, evacuation and communication systems. Installation and commissioning is easy and cost effective. Off the shelf, two-conductor cable provides power, communication and control with a range of up to 2.4 miles (4km). Systems can be commissioned and customized quickly in the field or remotely with push button menu selections or a point-and-click software interface. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:29 AM Page 265 ECHO DIGITAL INTERCOM SYSTEM DIVISION 1 CENTRAL CONTROL DIVISION 2 CENTRAL ROOM OFFICE SECURITY • Private communication, conference calls and public address • Field programmable via Windows® interface software • System supervision and full fault diagnostics • • DSP technology provides crisp, clear communication and noise immunity Handset, gooseneck microphone, headset, hands-free and single button communication options • Fiber optic, PBX, two-way radio, radio pocket pager, public page and background music interfaces • ECHO cancellation, noise and feedback elimination for digital quality/high intelligibility audio • Industry standard low-cost wiring • 24VDC, 120-240VAC • Ambient noise monitoring automatically adjusts speaker volume to surpass ambient sound level • • Standard features include one-touch emergency paging, programmable station directory, speed dialing, caller ID and auto conference Hazardous-area, explosion-proof, panel mount, flush-mount, desktop, vandal-resistant and weatherproof stations How to Order Contact factory for complete system configuration and model selection 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Note: Power supplied to central cabinet and external powered loudspeakers and beacons only. Fax: 708.534.4852 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/12/08 12:50 PM Page 254 FEDERAL SIGNAL CORPORATION SelectFone ® Multi-Party Intercom and Paging System The SelectFone® Intercom and Paging System is designed for communication in industrial environments where high noise, corrosive atmospheres, hazardous areas, and extremes of temperature, dust, and humidity create hostile environments. • Available in 24VDC and 120VAC • Single- and five-channel models • Paging and intercom functions • Two-way, multi-party communication • Wall mount, desktop, and panel mount models • Indoor and outdoor, hazardous location models • UL and cUL Listed 5 yyr WA RRANT Y A SelectFone Intercom System allows operators to both broadcast instructions over the system speakers and hold conversations with two or more people. Five channel intercom systems allow five simultaneous conversations without cross-talk or interference. Each SelectFone station features an impact resistant, Cycolac™ handset with a noise canceling microphone and a push-to-page button, an "Off-Hook" indicator LED, and a channel selector switch (on fivechannel models). To broadcast a message over the system loudspeakers, the operator lifts the handset from the cradle, presses the push-to-page button located in the grip of the handset and speaks into the microphone. To initiate communication, the user lifts the handset, identifies an open channel, and pages. The user releases the button and is ready for a conversation. The recipient(s) finds a convenient intercom station, selects the channel, and joins the conversation by speaking into the handset. A SelectFone System consists of an unlimited number of SelectFone stations and loudspeakers. SelectFone stations are available in a variety of configurations to meet the facility-specific requirements. Indoor wall-mount stations, designed for use in hazardous locations, feature Type 12 enclosures and are suitable for Class I, Div. 2 applications. Outdoor wall-mount stations, designed for use in hazardous locations, are enclosed in Type 4X housings and are suitable for Class I, Div. 2 applications. Panel mount stations, designed for installation in a user-supplied panel, are suitable for indoor use. Desktop stations, suitable for office environments, feature an integrated speaker and useradjustable volume control. The paging amplifier and power supply of the Desktop and Panel mount stations are housed in a Subset that includes the cables and connectors required for installation within ten feet of the intercom. SelectFone Systems are easy to install, maintain, and expand. Installation is simplified by external mounting tabs, color-coded wiring, and easy-toaccess terminal blocks. Line balance adjustments are made quickly and easily via the Line Balance Unit that is required in each system. The Line Balance Unit properly loads the page line and all channel line circuits. Maintenance is made easy by the modular design of the power supply and the paging amplifier, which feature a plug-in design for quick and easy replacement. Any SelectFone system can be expanded infinitely as system requirements grow. SelectFone stations are compatible with other traditionally popular systems and can be used to expand existing systems or replace faulty units. All SelectFone stations are available in either 24VDC or 120VAC operating voltages. Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:22 AM Page 255 MULTI-PARTY INTERCOM/PAGING SYSTEM AM15 SF1015DT DESKTOP AM15 LINE BALANCE ASSEMBLY SF1015P PANEL MOUNT SF1235X WALL MOUNT OFF HOOK OFF HOOK VOLUME 1 2 3 4 5 PARTY LINE 1 2 3 4 OFF HOOK 5 PARTY LINE 1 2 3 4 5 SUBSET SUBSET PARTY LINE SUBSET SUBSET PAGE-one twisted pair PARTY-one twisted pair per channel POWER-one twisted triple Popular applications include power plants, metal processing plants, mining operations, paper mills, offshore platforms, water treatment plants, and manufacturing, packaging, and processing plants. In any environment where rugged communication systems are critical, the SelectFone System offers a highly reliable solution. Each station is designed to perform in hostile environments and no single point of failure will cause a system failure. INTERCOM MODELS: SF-1231X Single channel, wall mount intercom for indoor hazardous locations SF-1235X Five channel, wall mount intercom for indoor hazardous locations SF-1011DT Single channel, desktop intercom for indoor locations SF-1015DT Five channel, desktop intercom for indoor locations SF-1011P Single channel, panel mount intercom for indoor locations SF-1015P Five channel, panel mount intercom for indoor locations SF-1241X Single channel, wall mount intercom for indoor and outdoor hazardous locations SF-1245X Five channel, wall mount intercom for indoor and outdoor hazardous locations LINE BALANCE UNIT: SF-1000LB Line Balance Unit POPULAR LOUDSPEAKER MODELS: AM15 15-watt indoor/outdoor, reentrant speaker AM15XD1 15-watt explosion proof, reentrant speaker AM15XD2 15-watt hazardous location, reentrant speaker AM30 30-watt indoor/outdoor, reentrant speaker AM30XD1 30-watt explosion proof, reentrant speaker SYSTEM CABLE: AMC16-1K 16-conductor cable, 18 gauge, shielded for five-channel systems, 1000 feet AMC8-1K 8-conductor cable, 18 gauge, shielded for single-channel systems, 1000 feet AMC2-100 2-conductor cable, 18 gauge, shielded for speakers, 100 feet AMC2-50 2-conductor cable, 18 gauge, shielded for speakers, 50 feet 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Fax: 708.534.4852 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/12/08 1:52 AM Page 256 FEDERAL SIGNAL CORPORATION SelectFone ® Multi-Party Intercom and Paging System Models SF-1011DT and SF-1015DT FOR USE IN OFFICE ENVIRONMENTS Federal Signal’s SelectFone® Intercom and Paging stations, SF-1011DT and SF-1015DT, are deskset style stations, suitable for use in an office environment. The power supply and speaker amplifier are housed in a remote subset that is designed to be wall mounted in a convenient location within 10 ft. of the handset station. • Available in 24VDC and 120VAC • Single- and five-channel models This desktop intercom is available in a single channel (SF-1011DT) or a five channel (SF-1015DT) version and models are offered in both 24VDC and 120VAC. The SF-1011DT and SF-1015DT are rated for Class I, Division 2, Groups A, B, C, and D. • Paging and intercom functions POWER REQUIREMENTS • Integrated paging speaker & volume control • 2-way, multi-party communication • Handset with noise-canceling microphone and push-to-page button • Off-Hook LED indicator • Type 1 enclosure • UL and cUL Listed Voltage Operating Current 120VAC 24VDC 105-130VAC, 50/60Hz Stand by: 10.0VA Operating: 33.0VA 24VDC Stand by: 3.0 watts Operating: 28.0 watts PAGING AMPLIFIER Output Voltage Gain Frequency Response Distortion Input Impedance Output Impedance Control BTL, push-pull, Class B, 12.0 watts maximum into 8Ω or 16Ω load 31.0dB adjustable 250Hz-12kHz Less than 1.0% THD at 12.0 watts, 1000Hz 50K Ω nominal 8Ω or 16Ω Speaker Volume Adjustable HANDSET Microphone Receiver Cable Output Level Voltage Gain Frequency Response Distortion Control 10Ω noise canceling dynamic 170±30Ω high efficiency dynamic 6 conductor coil cord, 10.0-ft. extended 1.5Vrms nominal into 33Ω load 68.0dB adjustable 250-6500Hz ±1.5dB 1.0% THD max at 1000Hz Microphone gain, receiver volume adjustable DIMENSIONS Subset Deskset 5 WA yyr RRANT 9.5" H x 7.98" W x 4.36" D (222.3 mm H x 202.7 mm W x 110.7 mm D) 8.63" H x 7.63" W x 5.42" D (219.2 mm H x 193.8 mm W x 137.7 mm D) WEIGHT Shipping Weight 13.5 lbs. (6.1 kg) 15.0 lbs. (6.1 kg) Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/1/08 3:29 PM Page 257 MULTI-PARTY INTERCOM/PAGING SYSTEM (SF-1011DT/SF-1015DT*) Deskset 7.63" (193.8 mm) 5.42" (137.7 mm) 4.31" (109.5 mm) OFF HOOK VOLUME 8.00" (203.2 mm) 1 2 3 4 8.63" (219.2 mm) 5 PARTY LINE Subset 7.98" (202.7 mm) 4.36" (110.7 mm) 4.88" (124 mm) 4.03" (102.4 mm) SUBSET 8.75" (222.3 mm) 9.5" (222.3 mm ) *5 channel unit shown HOW TO ORDER • Specify model number and voltage • Line Balance Unit and Loudspeakers sold separately • Please refer to Model Number Index SF-1011DT/SF-1015DT beginning on page 380 R E P L A C E M E N T PA RT S Description Power Supply Module – 120VAC Speaker/Amplifier Module – 120VAC Handset Pre-amp PCBA Main PCBA – 120VAC Handset Dynamic Mic Microphone Cap, Black Cradle, Black Handset Assembly, Black Subset, 120VAC Model Number K2001883B K2001882C K2001881B-02 K2001884A K137147A K8592037A K8592029A K8592033A SF-Subset-120 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Model Number Power Supply Module – 24VDC Speaker/Amplifier Module – 24VDC Handset Receiver Element Main PCBA – 24VDC Receiver Cap, Black Push-to-Page Button Handset Assembly, Black, Desktop Subset, 24VDC Fax: 708.534.4852 K2001883B-01 K2001897B K8592034A K2001884A-01 K8592036A K8592038A K8592082A SF-Subset-024 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:26 AM Page 258 FEDERAL SIGNAL CORPORATION SelectFone ® Multi-Party Intercom and Paging System Models SF-1011P and SF-1015P DESIGNED FOR PANEL MOUNT/ DESK-EDGE INSTALLATIONS Federal Signal’s SelectFone® Intercom and Paging stations, SF-1011P and SF-1015P, are designed for installation in a usersupplied panel. The power supply and speaker amplifier are housed in a remote subset that is designed to be wall mounted in a convenient location within 10 ft. of the handset station. • Available in 24VDC and 120VAC This panel mount/desk-edge intercom is available in a single channel (SF-1011P) or a five channel (SF-1015P) version and both models are offered in 24VDC and 120VAC. These units are UL Recognized components. The SF-1011P and SF-1015P are rated for Class I, Division 2, Groups A, B, C, and D. • Single- and five-channel models POWER REQUIREMENTS • Paging and intercom functions • 2-way, multi-party communication • Handset with noise-canceling microphone and push-to-page button Voltage Operating Current 120VAC 24VDC 105-130VAC, 50/60Hz Stand by: 10VA Operating: 33VA 24VDC Stand by: 3-watts Operating: 28-watts REMOTE SPEAKER AMPLIFIER • Off-Hook LED indicator • Type 1 enclosure • UL and cUL Listed Output Voltage Gain Frequency Response Distortion Input Impedance Output Impedance Control BTL, push-pull, Class B, 12.0 watts maximum into 8Ω or 16Ω load 31.0dB, adjustable 250Hz-12kHz Less than 1.0% THD at 12.0 watts, 1000Hz 50kHz 8Ω or 16Ω Speaker Volume Adjustable HANDSET Microphone Receiver Cable Output Level Voltage Gain Frequency Response Distortion Control 10Ω noise canceling dynamic 170±30Ω high efficiency dynamic 6 conductor coil cord, 10.0-ft. extended 1.5Vrms nominal into 33Ω load 68.0dB adjustable 250-6500Hz ±1.5dB 1.0% THD max at 1000Hz Microphone gain, receiver volume adjustable DIMENSIONS Subset Intercom 5 WA yyr RRANT 9.5" H x 7.98" W x 4.36" D (222.3 mm H x 202.7 mm W x 110.7 mm D) 6.5" W x 6.0" D x 3.75" H (165.1 mm W x 152.4 mm D x 95.2 mm H) WEIGHT Shipping Weight 13.75 lbs (6.24 kg) 14.25 lbs. (6.46 kg) Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/1/08 3:31 PM Page 259 MULTI-PARTY INTERCOM/PAGING SYSTEM (SF-1011P/SF-1015P*) 6.5" ( 165.1 mm) 6" (152.4 mm) 6" (152.4 mm) OFF HOOK 1 2 3 4 3.75" (95.2 mm) 3.25" (82.6 mm) 5 PARTY LINE 9.57" (243.1 mm) 7.98" (202.7 mm) 4.36" (110.7 mm) 4.88" (124 mm) 4.03" (102.4 mm) SUBSET 8.75" (222.3 mm) 9.5" (222.3 mm ) HOW TO ORDER • Specify model number and voltage • Line Balance Unit and Loudspeakers sold separately • Please refer to Model Number Index SF-1011P/SF-1015P beginning on page 380 *5 channel unit shown R E P L A C E M E N T PA RT S Description Power Supply Module – 120VAC Speaker/Amplifier Module – 120VAC Handset Pre-amp PCBA Main PCBA – 120VAC Handset Dynamic Mic Microphone Cap, Black Cradle, Black Handset Assembly, Black Subset, 120VAC Model Number K2001883B K2001882C K2001881B-02 K2001884A K137147A K8592037A K8592029A K8592033A SF-Subset-120 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Model Number Power Supply Module – 24VDC Speaker/Amplifier Module – 24VDC Handset Receiver Element Main PCBA – 24VDC Receiver Cap, Black Push-to-Page Button Handset Assembly, Black, Desktop Subset, 24VDC Fax: 708.534.4852 K2001883B-01 K2001897B K8592034A K2001884A-01 K8592036A K8592038A K8592082A SF-Subset-024 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 1/27/08 11:27 AM Page 260 FEDERAL SIGNAL CORPORATION SelectFone ® Hazardous Location Multi-Party Intercom and Paging System Models SF-1231X and SF-1235X FOR USE IN HAZARDOUS LOCATIONS • Available in 24VDC and 120VAC • Single and five-channel models • Paging and intercom functions • 2-way, multi-party communication • Handset with noise-canceling microphone and push-to-page button • Off-Hook LED indicator • Type 12, IP50 enclosure • UL and cUL Listed Federal Signal’s SelectFone® Intercom and Paging stations, Models SF-1231X and SF-1235X, are designed for wall mounted installation indoors in hazardous locations. This intercom is available in single channel (SF-1231X) and five channel (SF-1235X) versions. The SF-1231X and SF-1235X are rated for Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F & G; and Class III environments. POWER REQUIREMENTS Voltage Operating Current 120VAC 24VDC 105-130VAC, 50/60Hz Stand by: 10.0VA Operating: 33.0VA 24VDC Stand by: 3-watts Operating: 28-watts REMOTE SPEAKER AMPLIFIER Output Voltage Gain Frequency Response Distortion Input Impedance Output Impedance Control BTL, Push-Pull, Class B, 12.0 watts maximum into 8Ω or 16Ω load 31.0dB adjustable 250Hz-12kHz Less than 1.0% THD at 12.0 watts, 1000Hz 50K Ω nominal 8Ω or 16Ω Speaker Volume Adjustable HANDSET Microphone Receiver Cable Output Level Voltage Gain Frequency Response Distortion Input Impedence Control 10Ω noise canceling dynamic 170±30Ω high efficiency dynamic 6 conductor coil cord, 10.0-ft. extended 1.5Vrms nominal into 33Ω load 68.0dB adjustable 250-6500Hz ±1.5dB 1.0% THD max at 1000Hz 100Ω Microphone gain, receiver volume adjustable DIMENSIONS Intercom 5 WA yyr RRANT Y 9.5" H x 7.98" W x 7.39" D (241.3 mm H x 202.7 mm W x 187.8 mm D) WEIGHT Shipping Weight 18.0 lbs (8.16 kg) 18.5 lbs. (8.39 kg) TEMPERATURE -58°F to 150°F (-50°C to 66°C) Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/1/08 3:32 PM Page 261 MULTI-PARTY INTERCOM/PAGING SYSTEM (SF-1231X/SF-1235X*) 7.39" (187.8 mm) 7.98" (202.7 mm) 6.77" (172 mm) 4.88" (124 mm) 4.03" (102.4 mm) OFF HOOK 1 2 3 4 9.91" (251.7 mm) 8.75" (222.3 mm) 9.5" (241.3 mm) 5 PARTY LINE *5 channel unit shown HOW TO ORDER • Specify model number and voltage • Line Balance Unit and Loudspeakers sold separately • Please refer to Model Number Index SF-1231X/SF-1235X beginning on page 380 R E P L A C E M E N T PA RT S Description Power Supply Module – 120VAC Speaker/Amplifier Module – 120VAC Handset Pre-amp PCBA Main PCBA – 120VAC Handset Dynamic Mic Microphone Cap, Black Cradle, Black Handset Assembly, Black Model Number K2001883B K2001882C K2001881B-02 K2001884A K137147A K8592037A K8592029A K8592033A 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Model Number Power Supply Module – 24VDC Speaker/Amplifier Module – 24VDC Handset Receiver Element Main PCBA – 24VDC Receiver Cap, Black Push-to-Page Button Handset Assembly, Black, Desktop Fax: 708.534.4852 K2001883B-01 K2001897B K8592034A K2001884A-01 K8592036A K8592038A K8592082A www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/12/08 12:19 AM Page 262 FEDERAL SIGNAL CORPORATION SelectFone ® Hazardous Location Multi-Party Intercom and Paging System Models SF-1241X and SF-1245X FOR USE IN INDOOR & OUTDOOR HAZARDOUS LOCATIONS Federal Signal’s SelectFone® Intercom and Paging stations, Models SF-1241X and SF-1245X, are designed for wall mounted installation indoors and outdoors in hazardous locations. This intercom is available in single channel units (SF-1241X, shown above) and five channel units (SF-1245X). Both models are available in 24VDC and 120VAC. These units are rated for Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F, G; and Class III environments. These models are UL and cUL Listed . • Available in 24VDC and 120VAC • Single and five-channel models • Paging and intercom functions • 2-way, multi-party communication • Off-Hook LED indicator Output • Type 4X, 12, and 13, IP66 enclosure • UL and cUL Listed Voltage Gain Frequency Response Distortion Input Impedance Output Impedance Control POWER REQUIREMENTS Voltage Operating Current 120VAC 24VDC 105-130VAC, 50/60Hz Stand by: 10VA Operating: 33VA 24VDC Stand by: 3-watts Operating: 28-watts REMOTE SPEAKER AMPLIFIER BTL, Push-Pull, Class B, 12.0 watts maximum into 8Ω or 16Ω load 31.0dB adjustable 250Hz-12kHz Less than 1.0% THD at 12.0 watts, 1000Hz 50K Ω nominal 8Ω or 16Ω Speaker Volume Adjustable HANDSET Microphone Receiver Cable Output Level Voltage Gain Frequency Response Distortion Input Impedance Control 10Ω noise canceling dynamic 170±30Ω high efficiency dynamic 6 conductor coil cord, 10.0-ft. extended 1.5Vrms nominal into 33Ω load 68.0dB adjustable 250-6500Hz ±1.5dB 1.0% THD max at 1000Hz 100Ω Microphone gain, receiver volume adjustable DIMENSIONS Intercom 5 WA yyr RRANT Y 16.0" H x 13.06" W x 8.5" D (406.4 mm H x 331.7 mm W x 215.9 mm D) WEIGHT Shipping Weight 20.0 lbs (9.07 kg) 21.0 lbs. (9.52 kg) TEMPERATURE -58°F to 150°F (-50°C to 66°C) Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 245_266_62362_FedSig.qxd 2/1/08 3:34 PM Page 263 MULTI-PARTY INTERCOM/PAGING SYSTEM (SF-1241X/SF-1245X) 14.83" (376.7 mm) 16" (406.4 mm) 9.93" (252.2 mm) 8.5" (215.9 mm) 13.06" (331.7 mm) NOTE: See SF-1231X & SF-1235X for paging system specifications. HOW TO ORDER • Specify model number and voltage • Line Balance Unit and Loudspeakers sold separately • Please refer to Model Number Index SF-1241X/SF-1245X beginning on page 380 R E P L A C E M E N T PA RT S Description Power Supply Module – 120VAC Speaker/Amplifier Module – 120VAC Handset Pre-amp PCBA Main PCBA – 120VAC Handset Dynamic Mic Microphone Cap, Black Cradle, Black Handset Assembly, Black Model Number K2001883B K2001882C K2001881B-02 K2001884A K137147A K8592037A K8592029A K8592033A 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Model Number Power Supply Module – 24VDC Speaker/Amplifier Module – 24VDC Handset Receiver Element Main PCBA – 24VDC Receiver Cap, Black Push-to-Page Button Handset Assembly, Black, Desktop Fax: 708.534.4852 K2001883B-01 K2001897B K8592034A K2001884A-01 K8592036A K8592038A K8592082A www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 305_318_62362_FedSig.qxd 2/12/08 12:05 PM Page 306 FEDERAL SIGNAL CORPORATION Station Level Paging Adapter Model 300PBX-SC LINKS TELEPHONE TO SELECTONE® OR PUBLIC ADDRESS SYSTEM • Paging by calling a dedicated extension • Powered by a phone line connection • Type 1 enclosure • FCC Approved The 300PBX-SC telephone system interface allows access from a PABX (Private Automatic Branch Exchange) to a SelecTone® system or centrally amplified paging system. A single standard RJ11 modular jack is the only input required. The 300PBX-SC is assigned a dedicated line in place of a telephone. By dialing the extension to which the 300PBX-SC is connected, direct paging access is made to the SelecTone command unit. When the connection is made, a tone is sounded both in the phone and the SelecTone® speaker amplifiers. The 300PBX-SC will automatically disconnect when the dial tone is heard or after the pre-determined time limit has expired. The Model 300PBX-SC includes both an audio output and a double-throw relay circuit to activate the music mute or other function during page. The audio output is a 600 ohm balanced line for direct connection to an audio amplifier. A high impedance output with level adjust is also provided. The controls can adjust the Alert Tone Level, Paging Access Time, Dial Tone Sensitivity and Dial Tone Trip Time. The cadmium-plated housing can be mounted to most surfaces by means of a #6 screw through the holes in the mounting flanges. Federal Signal’s 300PBX-SC Station Level Paging Adapter saves money by linking an existing phone system to a public address system or SelecTone system. 5 yyr WA RRANT Y Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com 305_318_62362_FedSig.qxd 1/28/08 1:15 AM Page 307 STATION LEVEL PAGE ADAPTER (300PBX-SC) AMR6 AMR6 AMR6 AMR6 AM25CK AM25CK 300PBX-SC 300PBX-SC POWER AUX IN (MIC) POWER 25VRMS AUDIO LINES 25VRMS AUDIO LINES AUX IN (MIC) PA CENTRAL CENTRAL PA AMPLIFIER 300GC POWER AMPLIFIER 300GC POWER POWER POWER AM25CK AM25CK 300CKS 300CKS TO ADDITIONAL SPEAKERS 300PBX-SC 300PBX-SC CASCADE IN AUX IN (MIC) 300GC 50GC POWER POWER MODEL 300MB 50GC-120 300GC MODEL 300SSC POWER POWER POWER 300CKS 300CKS POWER 300PBX-SC AM25CK TO ADDITIONAL SPEAKERS AM25CK 300PBX-SC AUX IN (MIC) CASCADE IN 50GC-120 300GC MODEL 300SSC 50GC 300GC POWER POWER POWER POWER MODEL 300MB * 300PBX is also compatible with Models 300VSC-1 and 300SCW-1 S P E C I F I C AT I O N S Input: Connector: Ringer Equivalence: Ring Detection: Loop Current: Alert Tone Frequency: Dial Tone Frequency: Page Access Time: Shipping Weight: Height: Width: Depth: RJ-11 or RJ-13 1.3 B 15.3 Hz to 68 Hz @ 40-150 V 90mA max 600Hz 350Hz 5 to 30 seconds 2.0 lbs. 0.9 kg 6.125" 15.6 cm 3.0" 7.6 cm 1.25" 3.2 cm 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Output: Connector: Impedance: Level: Relay Ratings: Controls: RCA Unbalanced Screw Terminals Hi-Z (22W min.) 600W -5.0 dB w/ internal termination -0.5 dB no termination SPDT, 1A contacts Output Levels, Alert Tone Level Dial Tone Sensitivity, Dial Tone, Trip Delay, Page Access Time HOW TO ORDER • Specify model number • Please refer to Model Number Index 300PBX-SC beginning on page 381 Fax: 708.534.4852 www.federalsignal-indust.com Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com