Transcript
FEU3NS-1E
www.inateck.c o m
FEU3NS-1E Portable Enclosure Instruction Manual Screw less and tool free design, precise and high quality crafting, unique ergonomic appearance and structure, light and convenient to carry Supports all standard 2.5“ SATA hard drives with a height of up to 9.5 mm Standard USB3.0-A interfaces on both ends of the cable, easy and fast data access and transfer, practical data storage medium for 2.5” HDD/SSD, energy supply via USB root cable connection LED for fast and informative information about operation status, supports Plug & Play, no computer restart necessary Compatible operating system environments: Windows XP/Vista/7/8, MacOS 9.0 and higher
Packing list: FEU3NS-1E Enclosure x1 USB3.0 data cable x1 Instruction manual x1
I.
FEU3NS-1E Introduction
Featuring advantages like small weight, slim form and high portability, 2.5” drives always were received in a positive way by computer enthusiasts. Portable drive enclosures in this way became the most important choice for users regarding solutions for storage mediums. The stability of a storage medium directly influences the safety and life span of data and drives. To accommodate these factors, Inateck developed and introduced a new enclosure named FEU3NS-1E , supporting 2.5” HDD/SSD with a height of up to 9.5 mm in a USB3.0 environment. The casing is casted using highly robust and stable ABS plastics, featuring a precise and high class workmanship. It is the ideal solution when quick and convenient swapping of 2.5” drives without the utilisation of tools is wanted. The installation and swapping of many drives was never any easier, the expansion of data storage capacity never any more convenient.
-2-
Scheme image of the enclosure :
ww
w.in a
teck
.de
LED indicator for power and transfer status
OF
F ON
USB3.0 interface
Power switch
ww
w.ina
teck.d
e
OF
F ON
-3-
Technical data
II.
Product name
Portable 2.5” HDD/SSD Enclosure
Product type
Inateck FEU3NS-1E
Weight
75g
Colour
Black
Supported drives
2.5” SATA I/II/III HDD/ SSD
Interface
USB3.0
Maximum height of drives
Height of up to 9.5mm supported
Hot Plug, Plug & Play
Supported
Licences
CE, FCC
Measurements
137mm length x 85mm width x 17mm height
Operation environment
Storage: -40 to 70 °C; Operation: 5 to 55 °C
Supported operating systems
Windows2000/XP/Vista/7/8; Mac 9.0 or above
III.
Hard drive installation steps a.
Please move the cover into the arrow direction indicated below. When being clear of the clamps, please lift the cover to remove it. Pu s h
Lift
-4-
b.
Please follow the arrow directions below while inserting the 2.5” hard drive. Then, move the drive forward in the indicated direction to establish a connection to the SATA interface of the enclosure.
Put Down
c.
Pu
sh
Please realign and lower the cover oriented on the position of the clip slots, move it forward in the indicated direction to close the enclosure. The installation is now completed.
Put Down
-5-
Pu
sh
d.
IV.
Now the USB data cable may be connected, one USB-A plug shall be plugged into the device, the other into a free USB interface of the PC. If the operating system has found the new storage medium, a Plug & Play symbol will show up in the status bar. In the data storage manager, too, the drive shall show up a operative.
Instruction for the removal of drives
Please note: Before the removal of the data storage device, please stop all data access and transfer to the device, so that the storage can be normally removed. Forced removal may lead to damage or loss of crucial data. To prevent any data loss, please strictly follow the steps for removal below! a. Removal from Windows systems: Right click on the hardware or USB device removal symbol in the status bar, click on the periphery to be removed. When the system notification reading “the device can now be safely removed.” shows up, you can remove the data storage.
-6-
Another way to remove the data storage is through the device manager (“Computer” -> “Device Manager” -> “Drives” -> Click on “Remove” for the drive to be removed, so that the drive can be detached safely.
b.
Removal from Macintosh systems: Please choose the symbol for “Portable drives / devices”, choose the menu function “Remove” from the drop down menu by right clicking onto the symbol. You may also drag the “Portable device” to the rubbish bin. Now, the device can be safely removed.
-7-
V.
Attention Package contains an extra foam sticker for 7 mm thickness hard drives, You should attach the sticker to the original one inside the lid before you insert the hard drive.
Foam
Extra Foam
Align and attach it onto the top of the original sticky pad inside the lid.
Stick
-8-
