Transcript
Catalog Number Notes
FEATURES & SPECIFICATIONS INTENDED USE — Ideal for use in food and beverage processing, cold storage, natatoriums and garden centers. Fiberglass enclosure protects fixture while remaining easy to service and clean. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses. CONSTRUCTION — One-piece 5VA rated fiberglass housing with continuous poured-in-place, closed-cell gasket. Tool-less ballast and wiring access. OPTICS — Injection-molded, impact-resistant clear acrylic diffuser with frosted ends and side lineal prisms is standard (.080" thick), securely tethered to fixture for ease of maintenance. UV stabilized polycarbonate diffuser option also is available (.080" thick). Acrylic frosted lens option available for reduced glare. Stainless steel latches (12) included. ELECTRICAL — Utilizes high-efficiency LEDs mounted to core circuit boards. 4100 Kelvin temperature standard with additional color temperatures also available including amber for coastal and livestock applications. High efficiency driver operates 100V through 277V, 50-60HZ. Integral surge protection tested in accordance with IEEE/ANSI C62.41.2 to Category C Low. Includes a temperature-sensing component that will limit the temperature of the LEDs in case of excessive ambient temperatures or mis-application. 0-10V driver standard. Bi-level control options available. Expected service life of 60,000 hours at 80% lumen maintenance (L80); predicted life of more than 100,000 hours. INSTALLATION — Fixture can be ceiling or suspend mounted. Surface conduit entry provisions with watertight plugs are standard. Stainless steel universal hanging clips included for suspension with aircraft cable (cable not included). Optional stainless steel V-hooks available for chain hanging (chain not included). LISTINGS — CSA Certified to UL and C-UL standards for ambient temperatures from -22°F (-29°C) to 104°F (40°C) depending on lumen package selected. Suitable for wet location. Covered Ceiling not required to maintain wet location listing or IP ratings. IP65, IP66 and IP67 rated and certified to meet NSF Splash Zone 2. NEMA 4X rated. 1500 PSI hose-down. DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified. WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application. Note: Specifications subject to change without notice. ORDERING INFORMATION
Type
High-Pressure Hose-Down
FHE LED FOOD PROCESSING
Specifications
6 (15.2)
Length: 52.0 (132.0) Width: 14-5/8 (37.1) Depth: 6 (15.2) Weight: 36 lbs. (12.7 kg)
14-5/8 (37.1)
All dimensions are inches (centimeters) unless otherwise specified.
Example: FHE LED 15L/57 FST
Lead times will vary depending on options selected. Consult with your sales representative.
FHE LED
/
Series
Lumens/Color temperature1
FHE LED 15" X 52"
5L 7L 9L 12L 15L
5000 lumens 7,000 lumens 9,000 lumens 12,000 lumens 15,000 lumens
(blank) 27 35 57 AMB
4100K, (65 CRI) 2700K, (85 CRI) 3500K, (85 CRI) 5700K, (70 CRI) Amber LEDs
Diffuser
Distribution
Voltage
(blank) Clear acrylic PCL Clear polycarbonate FST Frosted acrylic
(blank) General distribution SD Spread distribution2
(blank) HVOLT 120 277 347 480
MVOLT; 120-277V HVOLT; 347V-480V, 60HZ only 120V 277V 347V (60HZ only) 480V (60HZ only)
Options3 CS89 CS89L12 CS88 CS88L12 MHKB
Cord set - NEMA type STW 16/3, 6', 600V, white, no plug, wet location4 Cord set - NEMA type STW 16/3, 12', 600V, white, no plug, wet location4 Cord set - Brad Harrison 3P male straight 600V molded plug, 6' type STOOW yellow PVC cord, 16/34 Cord set - Brad Harrison 3P male straight 600V molded plug, 12' type STOOW yellow PVC cord, 16/34 Stainless steel V-hook and brackets
WLF WLFEND WLFEND2 L/SP DIM PMP
Wet location fitting (two pre-installed, 40" off centers) 5 Wet location fitting (one end) 5 Wet location fitting (both ends)5,6 Less surge protector Pre-wired for 0-10V low-voltage dimming (100-10%)4 Pendant monopoint7
Accessories: Order as separate catalog number. FHEMHKB FHEEMK FHERMK MHCH36 LCF
Stainless steel V-hook and brackets End mount suspension bracket11 Rigid mounting bracket 3' Double chain12 Light/Glare control film
MHHK120 MHHK120SS FHEACT120 FHEACT240 RK1 T10DRV
10' single leg aircraft cable13 10' single leg aircraft cable, stainless steel13 10' Y-toggle aircraft cable 20' Y-toggle aircraft cable Torx® T10 screwdriver for TRS option
MSI__ Wet location 360° motion sensor pre-wired for ON/OFF operation4,8,9 TRS Tamper-resistant Torx® T10 screws10 DLC DesignLights Consortium® qualified product
Notes 1 The CCT value provided is of lamp source and actual CCT will vary upon levels. 2 Only available with 41K. Not available on 5L. 3 For additional options consult factory. 4 Cordsets, MSI_, and DIM options are not available on the same fixture. Combination of two only (ex. cordset and DIM, cordset and MSI_, etc.). 5 Fixture will no longer be NEMA 4X rated. 6 Not available with cord, sensor or photocell options. 7 Housing pre-drilled with WLF in center; additional support cables required
8 For mounting up to 8', specify MSI8; for mounting up to 20', specify MSI20; for mounting up to 40', specify MSI40. 9 Must specify voltage. 10 Stainless steel Torx® T10 screws with center reject pin 11 Not available with HVOLT, 347, or 480. 12 For use with MHKB option. 13 For use with EMK option.
INDUSTRIAL FHE-LED
FHE LED High-Pressure Hose-Down, LED LED Specification Matrix* Lumens
Watts
Lumens per watt
mA
Number of boards
Maximum ambient temperature
Recommended light source comparison 2-lamp 32-watt T8
5,000
66
76
525
4
40°C
1-lamp 54-watt T5HO 100MH
7,000
86
81
350
8
40°C
9,000
118
76
525
8
40°C
12,000
152
79
350
12
25°C
3-lamp 32-watt T8, 2-lamp 54-watt T5HO 4-lamp 32-watt T8 150MH 3-lamp 54-watt T5HO 175MH 6-lamp 32-watt T8
15,000
215
74
525
12
4-lamp 54-watt T5HO
25°C
250MH *Values based on 41K LEDs and clear acrylic lens. Calculations are estimated results for general informational purposes only. Results may vary depending on the application.
DIMENSIONS
Inches (centimeters). Subject to change without notice.
6 (15.2) 52 (132.0) 14-5/8 (37.1)
MOUNTING ACCESSORIES
Cable
V-hook, cable
V-hook, chain
FHEEMK – End mount suspension bracket**
FHERMK – Rigid mounting bracket**
PMP – Pendant monopoint
WLF – Wet location fitting (two pre-installed, 40" off centers)
** Made from 304 stainless steel
PHOTOMETRICS See www.lithonia.com for photometry reports.
FHE-LED
INDUSTRIAL:
One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 Fax: 770-981-8191 www.lithonia.com
© 2012-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/29/14
FHE LED High-Pressure Hose-Down, LED LIGHTING FACTS
FHE-LED
INDUSTRIAL:
One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 Fax: 770-981-8191 www.lithonia.com
© 2012-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/29/14
