Transcript
Opterna Opterna R
R
Fiber Optic Breakout Cable OSP Solutions
Introduction Opterna fiber optic breakout cables are rugged, high performance optical communication cables suitable for inside plant installations. Fiber optic breakout cable contains multiple individual fibers each with its own aramid strength member and jacket which makes the cable more reliable and rugged for critical applications. Breakout Cable is designed for routing cables to different locations and direct termination of fibers in the field. The cable is also suitable for pre-terminated cable assemblies.
ONFR (rated), OFNP (Plenum rated) or LSZH rated
Features:
2.0mm Sub-Unit Optical Fiber 0.9mm buffered Fiber
• Short and moderate distance links within a building, where multiple termination points are needed
Aramid Yarns Sub-unit Jacket Central atrength Member Ripcord PVC Outer jacket
• OFNR (riser rated), OFNP (plenum rated) or LSZH (low smoke zero halogen rated) • Direct Termination on 2.0 mm Sub-Units • RoHS (Restriction of the use of Certain Hazardous Substances Directive) complied
Americas: (703) 653-1130
[email protected]
Europe: +44(0)2031 301 716
[email protected]
Middle East: +971 4 299 7676
[email protected]
Asia Pacific: +91(0) 484 2104 779
[email protected]
Visit: Opterna.com DSFC1rev1
1/3
Opterna Opterna R
R
Fiber Optic Breakout Cable OSP Solutions Applications: • Backbone & Computer Room Cabling • CCTV, Factory automation, Utility segments • Pre-terminated cable ass
Specifications: • ISO/IEC 11801 • Telcordia GR-409-CORE • ANSI/ ICEA S-83-596
Options:
• Fiber - Single mode, 50, 62.5μm multi mode available • Higher fiber counts available upon request • Other Sub-Unit Diameters Available (1.8mm, 2.4 mm, 2.9mm etc.) • Buffered fiber : Natural (white) • For Sub-unit & Outer Jacket color - Single Mode 9/125 : Yellow - 62.5/125 OM1 1Gbe : Orange - 50/125 OM2 1Gbe : Orange - 50/125 OM3 10Gbe : Aqua - 50/125 OM4 10Gbe : Heather Violet
Subunit Identifications:
The identification code & number is printed on the sub-unit jacket every 10 cm (eg. 62.5MM#1, 62.5MM#2)
Americas: (703) 653-1130
[email protected]
Europe: +44(0)2031 301 716
[email protected]
Middle East: +971 4 299 7676
[email protected]
Asia Pacific: +91(0) 484 2104 779
[email protected]
Visit: Opterna.com DSFC1rev1
2/3
Opterna Opterna R
R
Fiber Optic Breakout Cable OSP Solutions Transmission Performance: Optical Fiber
62.5/125 μm OM1 (850/1300)
50/125 μm OM2 (850/1300)
50/125 μm OM3 (850/1300)
50/125 μm OM4 (850/1300)
9/125 μm OS2 (1310/1550)
3.5/1.0
3.0/1.0
3.0/1.0
3.0/1.0
0.40/0.30
200/500
500/500
1500/500
3500/500
-
10Gbps
-
-
300
550
-
1Gbps
275/550
550/550
-
-
-
Attenuation (dB/km) Typical values Minimum Bandwidth (MHz •km) Ethernet Link Distance (m)
Mechanical Characteristics: Storage Temperature : -20 to + 70 / Operating Temperature : -10 to +60 °C Fiber Count
Nominal Diameter
Nominal Weight
Maximum Tensile Load
Crush Load
[mm]
[kg/km]
[N]
[N]
[N/cm]
2
7.5
50
660
300
4
7.7
55
660
6
8
65
8
9.5
12
10.5
Short Term Long Term Short Term Long Term
Minimum Bend Radius Loaded
Installed
[N/cm]
[mm]
[mm]
35
13
150
75
300
35
13
154
77
660
300
35
13
160
80
85
660
300
35
13
190
95
95
1320
660
35
13
210
105
Ordering Info:
FC-XXX-BTC-NA-YYY-LZ-ZZ FC-XXX-BTC-NA-YYY-NR-ZZ FC-XXX-BTC-NA-YYY-NP-ZZ XXX : OS1, OS2, 7A1, 7A2, 7B2, 7B3, 655, OM1, OM2, OM3, OM4 YYY : Number of Cores ZZ : YL, OR, AQ, HV
Copyright 2014, Opterna International Corp. All rights reserved. The information contained herein is subject to change without notice. The Opterna name and logo are registered trademarks of Opterna Technology Limited.
Americas: (703) 653-1130
[email protected]
Europe: +44(0)2031 301 716
[email protected]
Middle East: +971 4 299 7676
[email protected]
Asia Pacific: +91(0) 484 2104 779
[email protected]
Visit: Opterna.com DSFC1rev1
3/3
