Transcript
Fiber Optic Networks communication
Data speed needed for several applications
I
Data speed needed for several applications II
Prediction of Communication Traffic 100K Relative value compared to as of 1995
10K
1,000 times in a next decade
1K 100
10 times in a last decade
10
Internet (around 100%/year)
Telephone 1 0.1 1995
2000
2005
Year
2010
2015
Throughput, Transmission Speed （bps）
Speed of LAN and Router 100T
CISCO CRS-1
10T M640+TXS Router
1T
CISCO12000
100G 10G
CISCO8600 CISCO7500
1G
100M 10M 1990
M160
100G-Ethernet
10G-Ethernet 1G-Ethernet
FDDI
100M-Ethernet
10M-Ethernet 1995
2000 Year
2005
2010
Overview of Network Development To Ubiquitous
Customization of services
Expansion of services Integration of facilities
NGN
Expansion of facilities
Mono-service
Multi-services
Reliability
Stability
1960
1980
Quality
Mobility
tal Digi
Analog
Ubiquitous media
Multi-media
2000
and s s b e d l a Heterogeneous e Bro Wir
2010
2020
Topologies
Ring (Token ring) Tree (Ethernet) Mesh (Broadcast-and-select)
Local area network (LAN) Wide area network (WAN) Metropolitan area network (MAN)
LAN: in a building and campus 70%
speed
N BASE-PHY
N : data rate [Mbps]
PHY: physical medium
100 Base Tx : ความเร็ว 100 Mbps บนสาย UTP 100 Base Fx : ความเร็ว 100 Mbps บนสาย Fiber 1000 Base T : ความเร็ว 1000 Mbps บนสาย UTP 1000 Base Sx : ความเร็ว 1000 Mbps บนสาย Fiber (Short Wave Length) 1000 Base Lx : ความเร็ว 1000 Mbps บนสาย Fiber (Long Wave Length)
Category = CAT มาตรฐานอุปกรณที่รองรับ Speed Category 1 = Analog Voice, Digital Voice Category 2 = Analog Voice, Digital Voice Category 3 = 10 Mbps Category 4 =
16 Mbps
Category 5 =
100 Base T
Category 5E =
1000 Base T
Category 6 = xxxxx Mbps
Usable Frequency Spectrum (Focusing on Light)
Wavelength Spectrum of Light and their Media and Applications
ATTENUATION VERSUS WAVELENGTH
6
FOR AN OPTICAL FIBER
LOSS (dB/km)
5 1ST WINDOW OH-
4 3 2
OHOH-
3 dB
1 0.8
0.9
1.0
1.1
1.2
WAVELENGTH
3RD WINDOW
2ND WINDOW
1.3
1.4
( um )
1.5
1.6
OPTICAL TRANSMISSION SYSTEM TX
Drive Circuit
Light Source
RX Opto detector
Drive Circuit
CORE Transmits the Light Signal Germanium Doped Silica Glass CLADDING Keeps Light Signal Within COATING Protects Optical Fiber From Abrasion and Externa
CORE CLADDING COATING
Multimode cable • 62.5/125 • 50/125 Singlemode cable • 9/125
Multi-mode 62.5 micrometer Core 125 micrometer Cladding 250 micrometer Coating 0.275 Numerical Aperture (NA)
Single-Mode 9 micrometer Core 125 micrometer Cladding 250 micrometer Coating 0.13 Numerical Aperture (NA)
OPTICAL FIBER Step index structure
• •
Core diameter : 5-62.5 8-50μmμm Cladding diameter : 125μm
• n1 > n2
OPTICAL FIBER
FABRICATION OF OPTICAL FIBERS ¾ Material: Silica = SiO2. ¾ Dopants for increasing or reducing the refractive index of SiO2. Core: increasing the refractive index by Ge, P, Al. Cladding: reducing the refractive index by B, F. Variation of Silica refractive index as a function of dopant concentration
PREPARING OF PREFORM Step I : Preform fabrication I Modified chemical vapor deposition: MCVD
PREPARING OF PREFORM Step I : Preform fabrication II Vapor-phase axial deposition: VAD
¾ Able to fabricate low loss preform (0.16 dB/km). ¾ Suitable for fiber used for long distance transmission.
Another Figure of VAD
Another Figure of VAD
PULLING Step II : Pulling preform
Control tension of pulling.
BECOMING FIBERS Pulling
Example of preform and fiber after being pulled
RAY PATHS IN OPTICAL FIBER
•
Entrance angle > maximum entrance angle Refracted ray
•
Entrance angle > maximum entrance angle Reflected ray
guided ray
MODE THEORY
•
Different entrance angle
Different propagating ray
Different “ MODES ” of propagation
MULTI-MODE FIBER
PROBLEM of MULTI-MODE FIBER
Problems •
Each mode has different propagation path Different arrival time
•
Zigzag-propagation
slow
•
Direct-propagation
fastest
Signal pulse broadening : Intermodal dispersion effect Not suitable for long-distance communication system
PROBLEM of MULTI-MODE FIBER Speed Mode# 1
Mode# 2
Mode# 3
Mode# 1 Mode# 2
Optical fiber
Mode# 3 Multi-mode fiber Mode X Mode# 1 Single-mode fiber
Arrival time Radiated
SINGLE-MODE FIBER (SMF)
Dimensions of Single-Mode and Multi-Mode Fibers
Optical Fiber Cables
Optical Fiber Cables (Contd.)
Optical Fiber Ribbon Cables
Submarine Fiber Cable Diameter is about 2 cm. Optical fiber Buffer Copper for power transmission to repeaters or amplifiers Cable strength supporter
Polyethylene for water resistance
Metal: against water pressure
Applications of Optical Fibers
Building Feeder Metropolitan short Metropolitan long Long distance Submarine
ITU Standards of Optical Fiber
LED
Laser
Siligon
Cable Standard Distances. Technology
Speed
Media
Distance
Connector
Ethernet 10 Base-T
10Mbps
UTP
100m.
RJ45
10 Base-2
10Mbps
Coaxial
185m.
BNC
100 Base-TX
100Mbps
UTP
100m.
RJ45
100 Base-FX
100Mbps
Multi-mode
2Km.
SC,ST
100 Base-FX
100Mbps
Single-mode
2-120Km.
SC,ST
1000 Base T
1000Mbps
UTP
100m
RJ45
1000 Base SX
1000Mbps
Multi-mode
220m/550m.
SC.ST
1000 Base LX
1000Mbps
Single-mode
80km
SC,ST
Fast Ethernet
Gigabit Ethernet
What is Media Converter ? RX TX
Media
• For example – Copper UTP, Co-Axial, Multi Cores – Fiber Optic Multi mode, Single mode
The Definition of Media Conversion
“To Convert data flow from one media type into another” • • •
Small device with two media-dependent interfaces and a power supply receive data signals from one media and convert them to another Remain ‘transparent’ - make one cable look like another without altering nature of network
For example - Copper to Fiber Optic - multi-mode to single mode
Why Use Media Converters?
• • • • • •
Extend network capabilities (Distance) Simplifies uses / upgrade network Installation and implementation is easy Security network Minimize high cost Future-proof
Fiber Optic Cable. • Advantages
• Disadvantages
- High bandwidth overlong distances
- Cable is more expensive
- Immune to EMI
- Termination is more
- Intrinsically secure - Does not attract lightning - Not susceptible to ground loops
expensive,difficult - Active network electronics is more expensive
Why Use Media Converters?
800
m.
Why Use Media Converters?
Why Use Media Converters?
Link Media Converter
Link Media Converter
Why LINK Media ? LINK your Best choice ! 1. High capabilities. 2. Savings Cost 3. Compatibility 4. Easy to Purchase 5. Warranty 6. Full Support. 7. Spare part support. 8. Easy in use
Sites Reference
Compatibility.
Warranty
2 year Warranty.
LINK Media Converter Support
- Test center for R&D. - Training with 3 seminars per month. “FREE OF CHARGE” - By telephone Calling. - Try for testing your system before purchase.
LINK Media Converter is easy Installation and Use • PNP
QUICK PRODUCT OVERVIEW
Unmanaged Ethernet
Fast Ethernet
ATM Converter Chassis Gigabit Industry
Ethernet
UT-0012 10Base-T to 10Base-2 Converter • • • • • • • •
Complies with 802.3 10Base-2/T standards MDI/MDI-X push button selection for RJ-45 port connection Extended distances up to 285m Operates in half duplex mode Compatible with other 10Base2/T devices Status LEDs for RCV, LNK, & Part to easily monitor network activities External power supply FCC Class A & CE approved
UT-0014 & UT-0016SM 10Base-T Fiber Converter • • • • • • •
Complies with IEEE 802.3 10Base-T/FL standard MDI/MDIX push button selection on RJ-45 port connection Extend fiber distances of up to 120km with single Mode fiber Compatible with other 10/100Base-TX Ethernet Device Status LED for activity & link to easily monitor network activity External power supply FCC Class A & CE approved
Fast Ethernet
UT-0114/0116/0110 Series 100Base-TX to 100Base-FX Converter • • • • • • •
Complies with IEEE 802.3 10Base-T/FL standard MDI/MDIX push button selection on RJ-45 port connection Extend fiber distances of up to 120km with single Mode fiber Compatible with other 10/100Base-TX Ethernet Device Status LEDs for activity & link to easily monitor network activity External power supply FCC Class A & CE approved
NEW
UT0216 MINI Enhanced 10/100Base-TX to 100Base-FX Media Converter
• • • • • • •
Ideal for Telco and Cable Network application Extends distances ranging from 2Km (multi-mode fiber) to 60Km (single mode fiber) N-Way Auto-negotiation support on RJ-45 port DIP switch manual setting on 10 or 100 and half or full duplex in case of auto-negotiation failure Store and forward at full wire speed Manual setting on speed and duplex for compatibility with non auto-negotiation devices FCC Class A & CE approved
UT-0214E/0216E/0210 Series Enhanced 10/100Base-TX to 100Base-FX Media Converter • • • • • • • • • • • •
Ideal for Telco and Cable Network application Extends distances ranging from 2Km (multimode fiber) to 60Km (single mode fiber) N-Way Auto-negotiation support on RJ-45 port DIP switch manual setting on 10 or 100 and half or full duplex in case of autonegotiation failure Store and forward at full wire speed Manual setting on speed and duplex for compatibility with non auto-negotiation devices Link Fault Signaling (LFS) LED illuminates to indicate link down Device DIP switches allow multiple configuration options LFS function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback test for first time installation and trouble-shooting Available with external and internal power supply (AC 90~240V & DC –48V) FCC Class A & CE approved
UT-0214E/ 0216E/ 0210 Enhanced 10/100 to 100FX Converter • •
• OFF/ FULL/ 100
•
ON/ HALF/10
•
DIP SWITCH SETTING 1- auto-negotiation(Default ON) 2- RJ-45 Duplex(H/F) 3- RJ-45 Speed(10/100) 4- Fiber Duplex(H/F) 5- LFS 6- Local Loopback(LLB) 7- Remote Loopback(RLB)
• •
Auto MDI Manual setting on speed and duplex for compatibility with non auto-negotiation devices Link Fault Signaling LED illuminates to indicate link down Link Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback test for first time installation and trouble-shooting Available with external & internal power supply(AC 90-240V & DC-48V) Ideal for Telco and Cable Network application
KEY FEATURES OF CONVERTERS
Enhanced
Link Fault Signal
Switch 24P 10/100 L2 / L3 Switch
•
Switch 24P 10/100 L2 / L3
Senses a breakdown anywhere along path, sends signal to switch, automatic switch to redundant link ( when switch support spanning tree function)
UT-0246/ 0266 Series 100Base-FX Multi-mode to Single Mode Converter
• • • • • • • • •
Complies with IEEE 802.3u 100Base-FX standard Compatible with all other 100Base-FX devices Extended distances up to 120km (long haul single mode) Available with SC and ST connectors Data and Clock Recovery Status LEDs for easy monitoring of network status External and power supply Chassis compliant (internal power supply) FCC Class A & CE approved
ATM
UT-0546 & UT-0566 ATM-155 Multi-mode to Single Mode Converter
• • • • • • • •
Complies with ATM SONET OC3/STM-1 Compatible with all other ATM devices Extends distances of up to 120km (single to single mode) Available with SC and ST connectors in various combinations Status LEDs for Link (LNK) to easily monitor network configuration External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
UT-0666 ATM-622 Multi-mode to Single Mode Converter • • • • • • • •
Complies with ATM SONET OC12/STM-4 Compatible with all other ATM devices Extends distances of up to 40km (single to single mode) Available with SC connectors only LEDs for link (LNK) and power (PWR) External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
Gigabit
UT-1016 Gigabit 1000Base-T to SX/LX Converter • • • • • • • • • •
Complies with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-SX/LX standard Auto MDI/MDI-X support on RJ-45 port Auto polarity correction on RJ-45 port Low power consumption Extends distances up to 220m for multi-mode SX (80km with long haul single mode) under full duplex mode Compatible with other Gigabit 1000Base-T/SX/LX devices Status LEDs for easy monitoring of device status External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
UT-1066 Series Gigabit Multi-mode SX to Single Mode LX Converter • • • • • • • •
Complies with IEEE 802.3z. Extended distances up to 80km (single to single mode) Compatible with all other Gigabit devices Available with SC and WDM Simplex SC single fiber connectors LEDs for link (LNK) and power (PWR) External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
NEW
GBIC AND MINI GBIC
Cost Costis ishigher higher!!
May Maynot nothave haveenough enoughfiber fiberports! ports!
UT-0214
Simply Simplyadd addaaMedia MediaConverter! Converter!
NEW
GBIC Series • • • • • • •
Complies with Gigabit interface converter IEEE 802.3z SCA 2 Duplex SC 3.3V (SM) 3.3/5V (MM) Hot Pluggable
Rack-mount Chassis Solutions
UT-3004 AND UT-3001 19” 4-slot Rack-mount Chassis • • • • • • • •
Accommodates four media converters Supports 10/100/1000Base-TX/FX, ATM-155/622 and serial converters 19" rack-mountable or standalone implementation Suitable for all size of networks in all locations Provides internal AC and DC switching power supply Available in AC 90-240V with AC Socket or DC -48V with terminal block Made from high quality durable steel Provides two mini cooling fans
UT-3012 19” Rack-mount 12-slot Media Converter Chassis
• • • • • • • • •
Accommodates up to 12 media converters operating under different protocols Supports two load sharing, hot swappable power supplies ON/OFF trigger guard protection on power switch Three serviceable high volume cooling fans LED status panel with fan and slot and power LEDs Supports slot power isolation Supports 10/100/1000Base-TX/FX, ATM155/622 and serial converters Prevents network downtime and protects your converter investments Available in AC 90-240V with AC Socket or DC -48V with terminal block
UT-3018 19” Rack-mount 18-slot Card-based Media Converter Chassis • • • • • • • • •
• •
SNMP-ready Redundant power supply (RPS) unit 3 high volume cooling fans Optional DC -48V Power Supply Supports up to 18 Line-card media converters allowing direct plug-into chassis Hot swappable media converter Two (2) load sharing, hot swappable power supplies LED status panel for fan, power, and slot Supports mix and match among 10/100/1000- base, copper, fiber, single/multi-mode, WDM products with ST, SC, MT-RJ, VF-45, or LC connector Available with AC and DC power Ideal for mission critical networks such as Enterprises, Banks, Military, etc.
Industry Ethernet Solutions
Old-fashioned Plant
Total Solution for Industrial Ethernet The Market Trend of IE Strategy
Trend World’s network and information technology today… • •
To use Ethernet as the major communications interface in many industrial communications and automation applications. Traditional field buses go to support Ethernet
– Modbus -> Modbus/TCP – Profibus -> Profinet
Trend • More and more industrial device manufacturers… such as PLC, DCS system, and field I/O manufacturers, now produce products equipped with Ethernet interface. – – – – –
Honeywell – GUS console system Modicon Quantum PLCs Fisher DeltaV – controller/console highway FOXBORO ia – nODEBUS Abb Advent – MasterBus 300
Trend Ethernet vs. Proprietary Fieldbus … The most obvious benefit to Ethernet is that it is based on an open standard, the very reason why PCs ignited the information technology revolution and made great contributions to all of us over the years.
-
•
Standardized networking architecture
•
Scalable networking solutions (10/100/1000 Mbp s) Economical
•
Familiar Internet/web technology
Easy to use
Future-proof
Trend Benefit of Ethernet TCP/IP • Familiarity Low Total Cost of Ownership
• Interoperability Web-based, Internet, ERP, CIM
FTP, SNMP ,SMTP, HTTP
• Availability Switch/ Fiber/ Wireless/ Redundant
• Performance Future-proven 10M/ 100M/ Gigabit
TCP/UDP
IP et Ethern er/ Wireless ib R-45/ F
The Features of Automation Application ¾
Need Higher Reliability
¾
Distributed Architecture
¾
Few Ports in Every Nodes
¾
Keep Operation Continuously
The Features of Automation Application Why not Use Ethernet in Plant Floor ?
Industrial Environment Communication Networks Device Management
The Features of Automation Application Industrial Environment
Control Cabinet
Control Cabinet
Source: SIMENSE
Source: Phoenix Contact
The Features of Automation Application Jet Ring (Redundant) Algorithms RapidSpanning SpanningTree Tree Rapid
Spanning SpanningTree TreeAlgorithms Algorithms
((802.1D 802.1D))
802.1wor orProprietary Proprietary)) ((802.1w 0
0
45
15
30
NetworkRecovery Recovery Network 20Seconds Seconds >>20
45
15
30
Network NetworkRecovery Recovery <<300m 300mSecond Second
The Features of Automation Application Industrial Ethernet vs. Office Ethernet Industrial Ethernet Products
(N) 0 ℃~70 ℃ (W) -40 ℃~75 ℃
0 ℃~45 ℃
Yes
No
Installation
DIN-Rail or Panel mounting
Desktop
Fast Media Redundancy
Yes (<300m sec)
No
ancy Redundant Power Input
Yes (+9~48 VDC)
No
Yes ( E-mail / Relay )
No
IEC 60068-2
No
Class I, Division II
No
Yes
Vendor Related
Temperature Range
d Rugge n Desig
nd R e du
Office Ethernet Products
Rugged Metal Enclosure
Signal Contacts Fault
for
ry Regulato Immunity Standard UL/cUL Location Rating Agency Flame Rating (UL)
Four Target Markets Ethernet (TCP/IP)
Factory Automation
• Semiconductor Factory • Printing Factory • Car Manufacture
Utility Automation
• Power/Windmill Substation • Water & Waste
Building Automation
Transportation Automation
• Video • Traffic Control Surveillance • Airport • Lighting Control • Subway • Security Control
Factory Automation Summary Information InformationLevel Level
Control ControlLevel Level
Ethernet
Application Server
Network Printer
SCADA
Printer
Device DeviceLevel Level
Gateway
Fieldbus
HMI
PLC
Ethernet / Serial
Factory Automation Applications FMCS
FMPCS
GMSSCADA SCADA GMS
AirControl ControlSCADA SCADA Air
PowerSCADA SCADA Power
SecuritySystem System Security
High Reliability Fast Recovery
Features NoFan Fan No
RingEnable Enable Ring
IndustrialInstallation Installation Industrial IndustrialDegree Degree Industrial Approval Approval
Factorymanufacturing manufacturingand and Factory processcontrol controlsystem system process
WideTemp. Temp. Wide
Example Semiconductorfactory factoryGMS GMSSCADA SCADA Semiconductor Workstation
¾Topology: Ethernet Ring ¾Networking Device:INS-803 ¾OS:eCos ¾Control Device:PLC ¾Ring recovery time < 300m Sec Customer needs
NoFan Fan Switch Switch No
Ring Ring
Industrialinstallation installation Industrial
Workstation
Building Automation Summary InformationLevel Level Information
Internet HMI OPC CLIENT
ControlLevel Level Control
Data Base
HOST Workstation
WEB SERVER Ethernet
HVAC HVAC DeviceLevel Level Device
SECUITY SECUITY
OPC SERVER Printer Ethernet
DVM DVM
Lifesafety safety Life
Building Automation Applications BIMS LightSCADA SCADA Light
HVACSCADA SCADA HVAC
PowerSCADA SCADA Power
SecuritySystem System Security
DVMSystem System DVM
LifeSafety Safetysystem system Life
CCTVSystem System CCTV
Features AutoWarning Warning Auto
HigherReliability Reliability Higher
Best Performance/Price
Example BuildingManagement ManagementDVM DVM System System Building ¾Topology: Bus ¾Networking Device:un-management products Video Server
¾Control Device:Digital Video Customer needs
Reliability Reliability
Video
CostEffective Effective Cost
Video
Video
DVM:Digital Video Management
LAN
Transportation Automation Summary InformationLevel Level Information City Traffic Control Center\
ControlLevel Level Control WEB SERVER
WEB SERVER Workstation SCADA OPC CLIENT
Workstation SCADA OPC CLIENT
Ethernet Ethernet
WEB SERVER Workstation SCADA OPC CLIENT Ethernet
Controlroom roomcontrol control Control
DeviceLevel Level Device
SignalControl Control Signal
Ethernet
Ethernet
Transportation Automation Applications ITS TCSSystem System TCS
CCTVSystem System CCTV
ElectronicCharge Charge System System Electronic
Dispatch Dispatch
TrafficMonitoring Monitoring Traffic
Features AutoWarning Warning Auto
IndustrialInstallation Installation Industrial
RingEnable Enable Ring
WideTemp. Temp. Wide
IndustrialDegree Degree Industrial Approval Approval
High Reliability
Utility Automation Summary Water Water
InformationLevel Level Information SCADA OPC CLIENT
Printer
Ethernet
ControlLevel Level Control
Oil Oil
Redundant Ring Power Power
DeviceLevel Level Device
Gas Gas
Utility Automation Applications SCADA Centralsupervisory supervisoryand andremote remotecontrol controlsystem system Central DistributedControl ControlSystem System Distributed
Advantage IndustrialInstallation Installation Industrial NoFan Fan No
RingEnable Enable Ring
IndustrialDegree DegreeApproval Approval Industrial
WideTemp. Temp. Wide AutoWarning Warning Auto
High Reliability Fast Recovery
2005 IE Global Strategy
Modern-day Plant
Factory Automation Process Event & Alarm History Calibration Changes
Maintenance Event & Work Order History
Operation Display
Remote Configuration
Real-time Audit
UT-4004/4006 Series RS-232 to Fiber Converter • • • • • • • • •
Complies with EIA/TIA-232, EIA/TIA- 574 & CCITT V.28 standard Supports asynchronous data transfer rate up to 120 kbps DTE, DCE setting push-button 35mm DIN RAIL mounted LED status indicators for power (PWR), link (LNK) and receive (RCV) Available ST/SC connectors External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
UT-4204/4206 Series RS-422/485 to Fiber Converter • • • • • • • • • • • •
Complies with EIA/TIA-422, EIA/TIA-485 Supports asynchronous data transfer rate up to 500 kbps Supports full and half duplex modes DIP switch enabled "terminator" DTE, DCE setting push-button 35mm DIN RAIL mounted Supports 4-wire full duplex and 2wire half-duplex modes LED status indicators for power (PWR), link (LNK) and receive (RCV) Available ST/SC connectors External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
UT-4301 RS-232/422/485 to 10/100Base-TX Converter • • • • • • • • • • • •
HP Open View and IBM/Tivoli NetView compatible Managed via CLI, Telnet, RS-232 Console, and Menu-driven interfaces Complies with EIA/TIA-232, EIA/TIA- 574, IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX) Supports 4 wires full duplex asynchronous serial data transmission (RS-422/485) Supports 2 wires half-duplex asynchronous serial data transmission (RS-485) Extended distances up to 1.2 km (24 AWG) using RS-422/485 Supports serial port asynchronous data rates up to 120 Kbps Auto-detecting 10/100 Mbps Ethernet interface 3-in-1 RS-232/422/485 serial interfaces External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
UT-4304/4306 Series RS-232/422/485 to 100Base-FX Converter • • • • • • • • • • • •
HP Open View and IBM/Tivoli NetView compatible Managed via CLI, Telnet, RS-232 Console, and Menu-driven interfaces Complies with EIA/TIA-232, EIA/TIA- 574, IEEE 802.3u (100Base-FX) Supports 4 wires full duplex asynchronous serial data transmission (RS-422/485) Supports 2 wires half-duplex asynchronous serial data transmission (RS-485) Extended distances up to 1.2 km (24 AWG) using RS-422/485 Supports serial port asynchronous data rates up to 115.2 Kbps Fiber port with choice of ST, SC, WDM Simplex SC connectors 3-in-1 RS-232/422/485 serial interfaces External power supply Chassis compliant (internal power supply) FCC Class A & CE approved
UT-0250
NEW
10/100 to 100FX Industrial Converter
Fiber For SC connector Also available with ST and Single Fiber connector
• •
• •
• RJ-45 For 10/100 and Half/full
• •
Auto MDI/MDI-X/Auto negotiation LED status for Link/Activity, LFS, 100, RPS, ALM, and Full Duplex/Collision Link Fault Signaling LED illuminates to indicate link down Link Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback test for assist initial installation and trouble-shooting Dual-power input 9~48V DC Operating temperature 0°C~ 70°C
NEW
UT-4510 RS-232 to Fiber Industrial Converter
Fiber For SC connector Also available with ST and Single Fiber connector
• • • •
RS-232
• • •
RS-232 data transfer up to 115.2 kbps DTE, DCE push-button setting Relay output for power failure & link down LED indicators for power, link and receive. Available ST/SC connectors Dual-power input 9~48V DC Operating temperature 0°C~ 70°C
NEW
UT-4520 RS-422/485 to Fiber Industrial Converter Fiber For SC connector Also available with ST and Single Fiber connector
• • • •
RS-422/485
• • •
RS-422/485 data transfer up to 115.2 kbps 4-wire full and 2-wire asynchronous data transmission Relay output for power failure & link down LED indicators for power, link and receive. Available ST/SC connectors Dual-power input 9~48V DC Operating temperature 0°C~ 70°C
UT-9005 NEW
5-Port 10/100 Industrial Switch • 5-port 10/100 RJ-45 Ports • Port 1 with bandwidth management QOS • Rugged, hardened IP30 case • Vibration/Shock operational • Dual redundant DC power inputs • Wide voltage range: 9~48V • DIP switch to enable or disable alarm functions for PWR, RPS, Port 1-5, & QOS • LED indicators for PWR, RPS, ALM, LNK, & ACT • Operating temperature: 0~70°C
PRODUCT OVERVIEW
managed Fast Ethernet
ATM Converter Chassis Gigabit
Managed
Why Media converter managed? • • • • •
Monitor. Control. Manage devices. View which converter. Change.
UT-7214/ 7216/ 7210 Managed 10/100 to 100Base-FX Standalone Converter • • • • • • • • • • •
Automatic MDI/MDI-X and NWay on RJ-45 port Link Fault Signaling (LFS) Loopback Test (LBK) LED status indicators for: power (PWR), link (LNK), activity (ACT, collision (COL), full duplex (FD) and LFS HP Open View and IBM/Tivoli NetView compatible Managed via CLI, Telnet, RS-232 Console, and Menu-driven interfaces Supports 2K MAC address entries 1MB RAM buffer with non-blocking architecture FTP firmware upgradeable Available ST, SC, and WDM Simplex SC connectors Internal power supply options FCC Class A and CE approved
UT-7314/ 7316/ 7310 Managed 2-port 10/100 to 100Base-FX Standalone Converter • • • • • • • • • • • • • •
Configurable as a two pair converters or as one primary link and a redundant link Automatic MDI/MDI-X and NWay on RJ-45 port Link Fault Signaling (LFS) Loopback Test (LBK) Supports in-band and out-of-band management LED status indicators for: power (PWR), link (LNK), activity (ACT, collision (COL), full duplex (FD) and LFS HP Open View and IBM/Tivoli NetView compatible Managed via CLI, Telnet, RS-232 Console, and Menu-driven interfaces Supports 2K MAC address entries 1MB RAM buffer with non-blocking architecture Internal power supply options Available ST, SC, and WDM Simplex SC connectors TFTP firmware upgradeable FCC Class A and CE approved
UT-8210 Managed 10/100 to 100Base-FX Converter (Management card) • • • • • • • • • • • •
Auto MDI Auto-negotiation LED status for Power, SYS(POST), Alarm, 100, Link/Activity Push-button for system restart POST(Power On Self Test) function Support various “mix and match” management-ready modules from 10/100/1000 to multi-mode/single mode. RJ-45 for in-band and RS-232 for out-ofband management 32-bit powerful CPU ARM 7 2MB(upgradeable to 4MB) Flash memory to store system & programming information 8MB SDRAM RAM buffer FCC Class A and CE approved
UT-8214/ 8216 Managed 10/100 to 100Base-FX Converter (Slave card) • • • • • • • • • • •
SNMP management application software (HP Open View and IBM/Tivoli NetView compatible) Available ST, SC, or WDM Simplex SC single fiber connectors Power supplied by managed chassis Auto MDI Auto-negotiation Hot swappable module LED status for Link/Activity, LFS, 100, and Full Duplex/Collision Link Fault Signaling LED illuminates to indicate link down Link Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loop back test for first time installation and trouble-shooting FCC Class A and CE approved
UT-8214/8216 SNMP Web Management
UT-8214/8216 SNMP Web Management
UT-8546/8566 Managed ATM-155 Multi-mode to Single Mode Converter • • • • • • • • • • •
Complies with ATM SONET OC-3/STM-1 Compatible with all other ATM devices Extend distances of up to 120km (Single to Single Mode) Management agent has push-button for system restart Managed via CLI, Telnet, RS-232 Console, and Menu-driven interfaces LED status indicators for power (PWR), link (LNK), and POST (Power On Self Test) "Hot-swap" slide-in module design HP Open View and IBM/Tivoli NetView compatible Available ST, SC, connectors Power supplied by managed chassis FCC Class A and CE approved
UT-8546/8566 SNMP Web Management
UT-8546/8566 SNMP Web Management
Managed Solutions UT-3018 19” 18-slot Managed Media Converter Chassis
UT-8210 Managed Agent RJ-45 For In-band RS-232 For Out-of-band
+
+
UT-8214/ 8216 Management-ready 10/100Base-TX to 100Base-FX Line Card Media Converter
Or
+
+
UT-8546/8566 UT-8666 Management-ready ATM155/622 fiber Line Card Media Converter
Or
+
+
UT-81066 Management-ready 1000base-FX Line Card Media Converter
Case study
Building Topology description: Fast Ethernet Fiber connection.
UT-0216
+
UT-3012 witch UT-0216
UTP Switch Key: Fiber Link 100 Mbps Twisted Pair 10/100 Mbps
Industrial Zone Factory
warehouse
Branch office 1
+ UT-3004 witch UT-0216
R and D
UT-0216
UT-0216 Key: Fiber Link 100 Mbps Twisted Pair 10/100 Mbps
Education Business school
Liberal
Halls
+ UT-3004 witch UT-0216
UT-0216
Key: Fiber Link 100 Mbps Twisted Pair 10/100 Mbps
Product Application Managed Campus Star Topology Topology description: Gigabit ISP Fiber connection Redundant link Feature Fast Ethernet internal connection
Administrations
School of Social Sciences
ISP
School of Computer Sciences & MIS Building
School of Arts
Key: GBIC Uplink 1000 Mbps Fiber Link 100 Mbps Twisted Pair 10/100 Mbps
School of Mathematics
NSH-558 NXF-717 NXF-742
Product Application Managed Campus Ring Type Topology Administrations
Topology description: Gigabit ISP Fiber connection Ring type Redundant link Feature Fast Ethernet internal connection
School of Social Sciences
ISP
School of Computer Sciences & MIS Building
NSH-558 NMF-747
School of Arts
Key: GBIC Uplink 1000 Mbps Fiber Link 100 Mbps Twisted Pair 10/100 Mbps
School of Mathematics
Service Providers FTTB UT-3018+UT8210+UT82XX
UT-7216 UT-7216
Topology description: SP to 10/100Mbps connection. Managed solutions completes FTTB application
Key: Fiber Link 100 Mbps Twisted Pair 10/100 Mbps
UT-7216
UT-7216
UT-7216
UT-7216
Managed Solutions UT-3018 19” 18-slot Managed Media Converter Chassis
UT-8210 Managed Agent RJ-45 For In-band RS-232 For Out-of-band
+
+
UT-8214/ 8216 Management-ready 10/100Base-TX to 100Base-FX Line Card Media Converter
Or
+
+
UT-8546/8566 UT-8666 Management-ready ATM155/622 fiber Line Card Media Converter
Or
+
+
UT-81066 Management-ready 1000base-FX Line Card Media Converter
Media Converter for WLAN Extension for Linking Wi-Fi Hotspot Stations DEPARTURE LOUNGE ARRIVALS LOUNGE
PASSPORT CONTROL & DUTY FREE
UT-3018+UT8210+UT82XX CONTROL CENTER
BAGAGE LOUNGE
Description wireless transmission radius Using managed Gigabit Line Cards together with the UT-3018 & UT-8210 to provide a reliable LX fiber link to connect Wi-Fi Hotspot stations
Point System Part Number Key
UT-XX X X SM-XX LINK Media Converter 00 =Ethernet 10
0=AUI
01=Fast Ethernet 100
1 =RJ45
02=Fast Ethernet 10/100 03=Chassis
2=BNC
40=IRF RS232
4=ST
42=IRF RS422
6=SC
43=RS to Fast Ethernet
7=MTRJ
05=ATM-155
8=FC
06=ATM-622 10=Gigabit 72=Managed standalone 10/10 73= 2 Port Managed standalone 10/10 81=Card Managed Giga bit 82=Card Managed 10/100 85=Card Managed ATM-155 86=Card Managed ATM-622
SM = single mode
XX = Max Distance Km.
