Transcript
RADIANTECH VMC-M100FX-AN-G
Fiber Optic Module Auto-Negotiable 10/100Mbps
VMC-M100FX-AN-P00-G
RJ45 to 100 Mbps VF-45TM Fast Ethernet Media Converter
` FEATURES ˙Cost effective copper to fiber conversion using VF-45 interface ˙Comply with IEEE 802.3 and IEEE802.3u ˙Provide UTP to fiber media conversion ˙Extend network span up to 2km ˙Diagnostic LEDs for troubleshooting and maintenance ˙Auto MDI/MDI-X on UTP port ˙10/100 Mbps auto-negotiation ˙Far end fault and link fault pass through ˙Powered by AC/DC power adaptor, USB power or 5VDC via I/O port on front panel
The VMC-M100FX-AN-G and is a media converter with metal case that converts the copper UTP media to fiber media with VF-45TM interface while the –P00 version is for the media converter with plastic case. The equipped auto-negotiation function enables these media converters to operate at 10 or 100 Mbps copper Fast Ethernet and the 100 Mbps fiber. The conversion complies with IEEE802.3 and IEEE802.3u standards with two different network connection media, 10/100Base-TX and 100Base-FX. The data transmission is realized by switching and store and forward technologies. For VMC-M100FX-AN-G, link fault pass through capability is built inside. Four LEDs on the front panel therefore display the media converter status and the far end fault conditions for network diagnosis purpose. The VMC-M100FX-AN-G can be used as a stand-alone device or be directly mounted into MCC-16-26, which is a 3U powered 19” rack mount chassis for Radiantech media converters. Sixteen media converter slots can be accommodated in this chassis. VMC-M100FX-AN-P00-G is a compact media converter with plastic case and best fits the desk top application. Two LEDs display the copper and fiber link and active status for this unit, respectively. Both VMC-M100FX-AN-G and VMC-M100FX-AN-P00-G are RoHS compliant products.
1
RADIANTEC H Media Converter Specifications Copper Standard: Connectors: Impedance:
IEEE 802.3u RJ45 100 Ohm
Fiber Optic Source: Wavelength: Connector: Optical Budget: Sensitivity: Maximum Distance:
LED 1300nm VF-45™ 11 dB min. (62.5/125 µm fiber), 6 dB min. (50/125 µm fiber) -31 dBm min. 2 km on 62.5/125 µm multimode fiber 2 km on 50/125 µm multimode fiber
Required Power Supply Output Voltage: Output Current: Polarity: Size of Connector:
5 VDC 500mA max. Inner pin positive ID = 1.35 mm, OD = 5.5 mm, Length of pin (min.) = 12 mm
Accessories 100 to 240 VAC, 50 to 60 Hz to 5VDC 500mA power adapter USB to DC jack copper cable
Physical and Environmental Specifications Dimensions: VMC-M100FX-AN-G
(W) 26 mm x (H) 84mm x (D) 61 mm (W) 1.04 in. x (H) 3.36 in. x (D) 2.44 in.
VMC-M100FX-AN-P00-G
(W) 22 mm x (H) 75 mm x (D) 50 mm (W) 0.88 in. x (H) 3 in. x (D) 2 in.
Weight:
170 g (0.374 lbs.) per unit for VMC-M100FX-A N-G 50 g (0.11 lbs.) per unit for VMC-M100FX-AN-P00-G
Operating Temp:
0° C - 42° C (32° F - 104°F)
Storage Temp:
-20° C - 70° C (-13° F - 158°F)
Agency Approvals This media converter conforms to the following standards: Safety:
UL 1950, EN 60950, CSA 22.2 #950
Electromagnetic Emissions:
FCC Part 15, Class A, EN 55022, Class A
2
RADIANTEC H Connection Diagram VMC-M100FX-AN-G
100-FX
Lnk/Act
2
1
10
9
Fx Signal FE-Flt Lnk/Act
T/Tx
10/100-T/TX
5V DC IN
+
Front Panel
Rear Panel
LED displays Link/Act (FX) Signal (FX) FE-Flt (T/TX) Link/Act (T/TX)
Amber Amber Red Green
Fiber port link LED Fiber port signal detect Far end fault pattern received TP port link LED
I/O port pin assignments 1= Output signal / related FX Lnk/Act 3= Output signal / related FX Signal 5= Output signal / related T/TX FE-Flt 7= Output signal / related T/TX Lnk/Act 9= Input 5VDC / 500mA
2 = signal ground 4 =signal ground 6 =signal ground 8 =signal ground 10 =Input 5VDC power ground
3
VMC-M100FX-AN-P00-G
LED Indicators INDICATION FUNCTION LABEL
COLOR ON
OFF
BLINK
Link/Act (TP) Green
Link
Disconnect Active
Link/Act (FL) Amber
Link
Disconnect Active
Ordering Information VMC-M100FX-AN-G VMC-M100FX-AN-P00-G
RoHS compliant 10/100 Mbps auto-negotiable RJ45 to VF-45 media converter, metal case RoHS compliant 10/100 Mbps auto-negotiable RJ45 to VF-45 media converter, plastic case
Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE If this product is
.
defective within the warranty period stated above, your exclusive remedy shall be, at RI’s option, to replace or repair the RI product or refund the purchase price of the RI product. Except where prohibited by law, RI will not Warranty; Limited Remedy; Limited Liability be liable for any loss or damage arising from this RI product This product will be free from defects in material and manufacture whether direct, indirect, special, incidental or for a period of one year from the date of purchase consequential regardless of the legal theory asserted.
VF-45
TM
is the trademark of 3M.
Contact: Sales 2-1, Industry East Rd. 1, Science-Based Industrial Park, Hsinchu 300, Taiwan. Tel: +886-3-5777818, FAX: +886-3-5777817 E-mail:
[email protected] http://www.radiantech.com.tw
4
