Transcript
02/15 E03AH20102804
Rev. A03
Data sheet
FO Outdoor cable PCF cable
Fiber Optic PCF outdoor cable 200/230µm duplex Reinforced Strength member
Fleece wrapping
PCF fiber
Strain relief PVC Subcable jacket
Ripcord
PUR outer jacket Strength member
Pic. 1 Cable cross-section with description
1 Features______________________
3 Applications___________________
• suitable for drag chains • for fixed and mobile installations in cable • good resistance against oil IRM 902 100°C ducts, cable conduits or cable trays • ozone-resistant acc. DIN VDE 0472-805 • for installations in harsh industrial environment • UV resistant acc. DIN EN ISO 4892-2 • free of paint-wetting impairment substances 4 Ordering information____________ acc. VW-Audi-Seat Central Standard Specification Part number • flame resistant • Multimode fiber A3c / IEC 60793-2-30 PCF outdoor cable duplex 903AH20102804 • halogen free acc. IEC 60754-2 A1 • facilitates transmission ranges of 300m with devices with a wavelength of 660nm and 2000m with devices with a wavelength of 1300nm
2 Technical data__________________ Dimensions
Material / colour
Numerical aperture
Max. attenuation
Bandwidth
Fiber core Cladding diameter Buffer diameter Subcable jacket diameter Outer diameter cable Buffer Subcable jacket Outer jacket Strain relief 10 m Fiber length 1000 m Fiber length Light source 650 nm (@ 0°C to 70°C) 650 nm (@ -20°C to 0°C) 850 nm (@ 0°C to 70°C) 850 nm (@ -20°C to 0°C) 1300 nm Laser (@ Ambient room temperature) 1300 nm LED (@ Ambient room temperature) 650 nm 850 nm 850 nm
200 µm 225 µm 500 µm 2.2 mm 8.0 mm ETFE PVC black, orange PUR green Aramide 0.4 0.28 0.25 18 dB/km 23 dB/km 12 dB/km 17 dB/km 12 dB/km 24 dB/km 35 MHz x km min. 40 MHz x km typ. 80 MHz x km
1
02/15 E03AH20102804
Rev. A03
Fiber Optic PCF outdoor cable 200/230µm duplex 2 Technical data (Continue)________ Pull force acc. IEC 60794-1-2, Method E1
Bending radius acc. IEC 60794-1-2, Method E11A, Type of test A
@ 1.000 N, Duration 10 minutes Attenuation increasing 650 nm Attenuation increasing 850 nm
max. 1.1 dB / 100 m max. 1.7 dB / 100 m
@ 2.000 N, Duration 10 minutes Attenuation increasing 650 nm Attenuation increasing 850 nm
max. 3.0 dB / 100 m max. 4.0 dB / 100 m
Pin diameter 130 mm, 5 Turns, 2 Cycles Attenuation increasing 650 nm Attenuation increasing 850 nm
Reversible attenuation increasing after load rejection max. 0.5 dB max. 0.5 dB Bending radius 65 mm, Reversible attenuation increasing after load rejection
Crush resistance acc. IEC 60794-1-2, Method E3
Impact resistance acc. IEC 60794-1-2, Method E4 Abrasion resistance acc. IEC 60794-1-2, Method E2, Type of test A Drag chain Test Alternating-bending-Test acc. IEC 60794-1-2, Method E8 Thermal properties Fireload Weight Type
@ 4.000 N/dm, Duration 1 minutes Attenuation increasing 650 nm Attenuation increasing 850 nm
4 Nm, 10 Impacts, Radius 300 mm min. 5.000 Cycles, 7 N Steel needle point radius 0.45 mm 10 x Diameter, 2.000.000 Cycles Attenuation increasing 650 nm Attenuation increasing 850 nm min. 50.000 Cycles, Load 10 N, Bending diameter 80 mm Attenuation increasing 650 nm Attenuation increasing 850 nm Transport and Storage Installation Operation nominal
No jacket cracks max. 0.5 dB max. 0.5 dB Reversible attenuation increasing after load rejection No Fiber cracks No Jacket damage Jacket is not rubbed through
max. 1.0 dB max. 1.0 dB max. 0.5 dB max. 0.5 dB -40°C to +70°C -5°C to +50°C -20°C to +70°C 1.34 MJ/m 0.37 kWh/m 52 kg/km I-V(ZN)Y (ZN)11Y 2GK200/230
The information released by Ratioplast-Optoelectronics GmbH in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Ratioplast-Optoelectronics GmbH for its use. RatioplastOptoelectronics GmbH reserves the right to change circuitry and specifications at any time without notification to the customer. Company address: Jockweg 64 D 32312 Lübbecke
Phone +49 (0) 5741 23 66 5-0 Fax +49 (0) 5741 23 66 5-44
Internet: http://www.ratioplast.de E-Mail:
[email protected]
VAT Reg. No.: DE 164 216 351 Local Court Bad Oeynhausen HRB 2382
2
