Transcript
1
FIBERExpress
DATASheet Floor Mount Rack Description
Technical specifications
Racks are available in three basic variants: free-standing floor mount, Copper and Fiber Rack kits (see Copper or Fiber section). All racks are equipped with Universal Horizontal Cable Management Channels to provide routing space and cable protection at the top and at the bottom of the racks.
Physical characteristics Dimension (H x L x P) - 19 in. Free-Standing: 2135 x 496 x 356 mm (84.0 x 19.5 x 14.0 in.) - 23 in. Free-Standing: 2135 x 597 x 356 mm (84.0 x 23.5 x 14.0 in.) - 44 rack space unit capacity (44U).
Material Features & Benefits
> 19 in.: Black or gray
> Robust and rigid construction to support high loading
> 23 in.: Black or gray
> Sturdy wide base and anchor holes for stable installation > 19 in. racks have threaded mounting holes on both sides for additional installation flexibility AX101179 Floor Mount Rack
> Uprights: steel, 11 gauge, textured powder paint finish > Base: steel, 6.35 mm (0.25 in.), textured powder paint finish.
Mounting Holes
> 4U Guiding arrows for easy alignment of equipment
> On both sides, as per EIA-310-D, Universal pattern, size 12-24, for 19 in. rack
> Equipped with two universal horizontal cable management channels
> On front only, as per EIA-310-D, Universal pattern, size 10-32, for 23 in. rack.
> Kit offerings to simplify material ordering (see Copper or Fiber Rack Kit section) > Available in 19 in. and 23 in. to cover most telecommunications room requirements.
Rack > Recommended for use with FiberExpress Manager shelves (Can contain up to 10 shelves) > 4U locating marks
Applications
> Ground stud on both sides
> Backbone termination in telecommunications rooms or main distribution rooms
> Maximum load: 455 Kg (1000 Lbs) > UL listed and CSA approved.
> Telco, CLEC & CATV fiber deployment > Fiber interconnect cabinet > Cross-connect or interconnect configuration.
1.800.262.9334
www.BeldenIBDN.com
2
FIBERExpress
DATASheet For More Information
Installation tips
Packaging
> Plan the telecommunications room layout prior to rack installation
> Floor Mount Rack (welded): individually packaged and shipped on a wooden pallet
> Properly anchor racks in the floor for a stable and secure installation > Allow for future expansion when planning shelf or patch panel installation > Use rack kits for easier material planning and fast and easy on-site installation
For any other product information call: 1 800 262-9334 • (514) 822-7533 or visit us at www.Beldenibdn.com
> Floor Mount Rack (knock-down): individually packaged in cardboard boxes
All information is subject to change without notice, since Belden CDT reserves the right to change its products as progress in engineering and manufacturing methods or other circumstances may warrant.
> Universal Horizontal Channels: packaged in a cardboard box in sets of two.
> Use patch cord management accessories when frequent moves, adds and changes are expecte
Ordering information Floor Mount Rack DETAIL
DIMENSION
COLOR
WEIGHT
UPC
ORDERING NUMBER
Welded Rack Assembly, 44U, (with two universal horizontal channels) Knock-Down Rack Assembly, 44U, (with two universal horizontal channels) Knock-Down Rack Assembly, 44U, (with two universal horizontal channels) Knock-Down Rack Assembly, 44U, (with two universal horizontal channels) Knock-Down Rack Assembly, 44U, (with two universal horizontal channels)
19 x 84 in. (7 ft.)
Black
30 kg (65 lb)
628575061594
AX101179
19 x 84 in. (7 ft.)
Black
30 kg (65 lb)
628575061587
AX101178
19 x 84 in. (7 ft.)
Gray
30 kg (65 lb)
628575062331
AX101254
23 x 84 in. (7 ft.)
Gray
32 kg (70 lb)
628575059201
AX100930
23 x 84 in. (7 ft.)
Black
32 kg (70 lb)
628575059218
AX100931
1.800.262.9334
www.BeldenIBDN.com
