Transcript
AUSTRALIAN TEL-TEC PTY LTD VALUE THROUGH INNOVATION, QUALITY AND SERVICE. Inside this catalogue you will find a range of test equipment renowned for outstanding performance, toughness and reliability. For over 30 years our company has provided technicians with the instruments necessary to effectively meet the demands of rapidly changing network technologies. Whether it is increased efficiencies in project installation testing or the speedy resolution of network faults, the right test sets will deliver customer satisfaction and reduced costs. Australian TelTec provides the tools you will reach for every day to make your work easier, faster and more profitable. BUTTINSKIS PAIR TRACERS (F-SETS) PIPE AND CABLE LOCATORS, LOOP-A-LINE SIDEKICK PLUS MULTI FUNCTION COPPER TESTERS TDR(PETS) & MULTIFUNCTION COPPER TESTERS BURIED MARKERS AND LOCATORS. WOODEN POLE TESTER PSIBER WIREXPERT STRUCTURED CABLING CERTIFIER PSIBER PINGERPRO AND LANEXPERT LAN & CABLE TESTERS
1 2 3 4 5 6 7 8 9
WiFi, xDSL AND ETHERNET TEST SETS LINES TESTER, NON-CONTACT VOLTAGE TESTERS FIBRE TEST SETS FIBRE TEST SETS FIBRE OPTIC INSPECTION FIBRE PATCH LEADS AND FIXED ATTENUATORS FIBRE CLEANING PRODUCTS FIBRE FUSION SPLICER RANGE TECHTABLE™
10 11 12 13 14 15 16 17 18
BUTTINSKIS
D361 (12KHz) 3 Year Warranty Digital Service Detection, Hands Free, Digital Service/ High Voltage Lockout and Alarm, ADSL Compatible.
Alert 340 3 Year Warranty Digital Service Protection, Loud Speaker Listening, Voltage Alarm / Lockout, ADSL Compatible.
Telemate TM-500i Entry level tester DSL compatible Line powered (no battery) Over voltage & current detection. Tone & pulse dialling. High impedance monitor.
Telemate TM-700i DSL compatible, LCD reads caller ID, polarity, volts, current, DTMF. Tone generator, tone & pulse dialling. Over voltage & current protection
1
PAIR TRACERS (F-SETS)
701K-G Probe with LED flash light, headset jack, short circuit confirming tone & LED indication, external warble selection, volume control, replaceable tip, telephone test port
2
PTS 100 / 200 Pocket size carry pouch, modular plug & crocodile clip cordage, continuity & polarity check
711K Rugged soft carry pouch, three distinct tones, high & low power settings, polarity & continuity check, modular plug & crocodile clip cordage
801K Rugged soft carry pouch, two distinct tones, 50Hz filter probe, modular plug, and crocodile clip cordage, continuity & polarity check
PIPE AND CABLE LOCATORS, LOOP-A-LINE
Tracker II 501 Pipe & cable locator, long range wire locating, work on active or dead system. Direct, inductive coupler or inductive antenna connection.
508S Wire finder mini locator, depth up to 0.9m, lengths up to 300m, determines approximate depths.
TX916 Loop-A-Line Reduces a two man task to a one man task. Rapid service restoration. Rugged hard carry case, tone for pair identification, open to disconnect short to loop the line, connect service. All on command & from the far end of the line.
3
SIDEKICK PLUS MULTI FUNCTION COPPER TESTERS SIDEKICK PLUS MODELS: •Standard Version •Advanced Version Features - 35MHz Impulse Noise Test, Step TDR with Auto-Bridge Tap Detection (zero dead zone) •ADSL/VDSL Version Features - ADSL/VDSL modem, Sync & service test, 35MHz WideBand Noise Spectrum Analysis, 4.4MHz Loss Measurement Test, 35MHz Impulse Noise Test, Step TDR with Auto-Bridge Tap Detection (zero dead zone) •Wideband Version Features-35MHz Wide Band Noise Spectrum Analysis, 4.4MHz Loss Measurement Test, 35MHz Impulse Noise test Step TDR with Auto Bridge Tap Detection (zero dead zone)
4
STANDARD FEATURES (All models) : •Advanced dual trace pulse TDR (PETS) (zero dead zone) •RFL (resistive fault locator detects up to 20MΩ) •1GΩ Leakage Test (insulation resistance) •Longitudinal Balance Test •Ground Resistance Test •Stress test •AC/DC Voltage •Resistance •Open Meter •Loop Current •Circuit Loss •Tracing Tone Generator •Reference Tone
TDR (PETS) & MULTI-FUNCTION COPPER TESTERS
TS90 TelScout TDR (PETS) For telephony applications within a 15km range. Rugged easy to use test set, short pulse width for close-in fault identification. One step test set up identifies distance to fault.
TV90 TDR for COAX Range of 1.22km. High performance TDR for Coaxial testing applications. Employs optimized pulsing and sampling, coupled with advanced filtering and signal-processing techniques to ensure clean waveform and easy identification. Small, portable and lightweight 1kg. Rechargeable battery pack. Twisted pair adapter and test probe
Rapidtrace TDR RT1100 and RT1200 Two models RT1100 3.5km range and RT1200 6km range. Configuration velocity of propagation. Store up to 50 traces and upload analytics (RT1200). Built-in tone generator for pair tracing. Test telecom, communication, Cat3-6, power and coax cables. Three year warranty.
5
BURIED MARKERS AND LOCATORS. VONAQ WOODEN POLE TESTER Marker Mate Marker Locator 1.5m depth range detects up to 7 different markers. Scan mode for simultaneous detection of all marker types.
6
Omni & Uni Burried Electronic Markers Mark & locate underground facilities. Easily located up to 1.5m. Passive high reliability design. Compatible with all maker locators. Range includes: Power, Water, Sanitary, Telephone, Gas, Cable TV, Non-potable water.
Vonaq Wooden Pole Tester The CXI-PT5000 is an innovative wooden pole tester that uses measurement and analysis technologies to indicate pole strength, allowing users to make an accurate assessment of the pole's stability and safety.
PSIBER WIREXPERT STRUCTURED CABLING CERTIFIER WIREXPERT 4500 First cable certification up to 2500 MHz to support new TIA CAT8. Most advanced cable certification for all standards: Class C/D/E/EA/F/FA, Category 5e/6/6A/7/7A, and the new draft CAT 8 as well as ISO draft standards Class I and Class II. Fast Autotest (CAT 6A in less than 9 Seconds). Endorsed by over 20 network cable vendors worldwide. Perform extended Fibre certification for EF compliant 850/1300nm Multimode and 1310/1550nm Single-mode Fibre. Supports MPO testing as well. The only certifier supporting all data centre, premise cabling and industrial Ethernet requirements. The WireXpert is now compatible with third party optical fibre inspection scopes.
7
PSIBER PINGERPRO AND LANEXPERT
8
Psiber LanXpert
Psiber PingerPro
An extensive suite of test capabilities include: Link Detection, Ping and Trace Route to verify network connectivity; Single Ended or Inline Packet Monitoring, Filtering and Capture to identify and solve complex problems; User defined Traffic Generation and structured RFC 2544 Stress Test to predict network performance under varying load conditions; Loopback, VoIP and Email tests to ensure proper performance of key network services.
Check connectivity with link and ping tests, emulate devices, display port configuration information and packet routing. The PingerPro makes it easy with auto tests, and the ultimate Ping test. Install, move, change and verify physical layer readiness with wiremap, fault location, optical power measurement, outlet connection identification and cable tracing.
LAN AND CABLE TESTERS
AT8LK LAN Toner Rugged soft pack pouch. LAN hub tracing. LAN hub detection. Weather resistant. Powered Ethernet check.
NC-100 NETcat® STRUCTURED WIRING TEST SET Integrity of STP, UTP & coax telecom cables. Continuity, correct allocation of wire pairs. Results on back lit display. Detects shorts, opens, reversed polarity, crossed & split pairs. 3 cable tone patterns for cable tracing & trouble shooting. Simple testing of LAN & telephone lines.
NC-500 NETcat PRO One touch testing verifies network cabling STP, UTP & coax. Measures length of cables & presence of network service. Check for continuity, correct allocation of wire pairs, Optional remote expansion modules for simultaneous testing See results on back lit touch screen display, Four cable tone patterns for cable tracing & trouble shooting.
Easy Check 900 Identifies shorts, opens, reversed & crossed pairs & miswiring. Easy to use PING, DHCP & Net Scan tests. 10M/100M/1000M. Cable map & wire map tests. Generate to one levels for cable tracing. link indicator for port ID. Shows length measurement on each pair. Identifies Power over Ethernet for VoiP PABX installers. Includes a 3 year warranty.
9
WI-FI, xDSL and ETHERNET TEST SETS
Greenlee AirScout WiFi Tester AirScout enables service providers with a tool that replicates the complex Wi-Fi home environment enabling the home for Wi-Fi readiness and optimization. This tester is a real time saver for engineers involved in deploying and supporting Wireless networks
10
DADI ADSL TEST SET DSL-3011A DSL-3011A xDSL Tester is a handheld ADSL/ADSL2/ADSL2+line test and analysis instrument, which can test physical layer, network layer and application layer quickly and accurately. It is a necessary tool for xDSL access and maintenance.
Greenlee DataScout 10G The Intelligent Tablet that goes beyond Test & Measurement •Chrome Browser •DS0 TIMS •Mobi Office •DDS/DATACOM •Email •T1/E1, T3, PRI •10M -10G Ethernet •Calendar •PDF Viewer •Wi-Fi •Video Training
Greenlee DataScout 1G Multi-service Network Analyser for Gigabit Ethernet, Fibre Ethernet and Wi-Fi. All-in-one analyser that is simple to use and fast to learn, enabling technicians to quickly determine and resolve network issues, regardless of the source.
LINES TEST SET LINE TEST SET Rugged volt/ohmmeter for testing telephone lines. Measure volts, megohms, k-ohms and low ohms. Features large colour coded scale. AC detection and push button line reversal. Steel framed rugged leather case.
NON CONTACT VOLTAGE TESTERS GREENLEE NON CONTACT VOLTAGE TESTERS GT-12A, GT-15 & GT-16 are Safe, non-contact voltage detectors. Self test every two seconds. Visual and audible alarms if AC voltage present. Silent mode. Auto shutdown extends batty life. Convenient pen-size device easily fits into pockets or tool pouches.
11
FIBRE TEST SETS
MINI OTDR Hand held OTDR models for MM & SM operation. Tier 2 testing building & campus networks, FTTX PON applications. Integrated visible fault locators & power meters. Short dead zone & powerful dynamic range performance. Tool free switchable adaptors. Fibre end face inspection. USB flash drive & connectivity. Fast fault location, splice verification & network documentation.
12
COMPACT OTDR Tier 1 and Tier 2 testing and reporting of SM and MM networks. Test and certify campus & central office networks. Inspect fibre end faces using DFS1 Digital FibreScope. Test Distributed Antenna Systems (DAS) fibre infrastructure. Visually locate bend/break location. Real-Time OTDR fault location and splice verification. Create standards compliant acceptance reports with TRM™ 2.0
FIBRE OPTIC LOSS TEST KITS Comprehensive range of Single Mode & Multimode kits. LED & Laser sources, multiple wave length. Wave ID & set reference. Data storage. Screw on & snap fit connector adaptors.
FIBRE TEST SETS
LAUNCH FIBRES Essential for accurate end to end fibre link loss measurements. Lightweight fibre rings ideal for testing in premise networks . Selection of lengths & connector types. Single Mode & Multimode versions.
FIBRE IDENTIFIERS Positively identify live fibres prior to cutting or splicing. For installation, maintenance & restoration of service. Accepts 250 & 900µm coated, 3mm jacketed & ribbon fibres. Tone detection. Measure core or relative power. Low insertion loss. FTTx model.
VISUAL FAULT IDENTIFIERS (VFI3 & VFI2) Compact testers with powerful laser source designed to trouble shoot faults on fibre optic cables. The red laser light will escape through sharp bends & breaks in jacketed or bare fibres as well as poorly mated connectors to provide a visible fault point. Locate faults in jumpers, distribution frames, patch panels & splice trays.
13
FIBRE OPTIC INSPECTION Fibre Optic Inspection FOCIS line of products enable network technicians and other personnel to safely inspect fibre end faces for contamination and verify the effectiveness of fibre cleaning procedures.
“FREE” iPhone/iPad App via Apple Store
“FREE” Android App via Google Play
14 Click to access
“NEW” AFL FOCUS FLEX: Bluetooth Wireless, Auto Focus and Auto Adjust
Features include: •Auto Pass/Fail analysis of fibre connector integrity in <1 sec. •IEC 61300-3-35, AT&T TP-76461 and user-defined pass/fail inspection •Paired fibre images for before/after, input/output, etc. •Image saving and sharing capabilities via mobile device email, text and web browser
FIBRE PATCH LEADS AND FIXED ATTENUATORS
FIXED ATTENUATORS & SPLICE- ON CONNECTORS Carrier grade in-line or termination build out types. Fixed attenuators LC, SC, ST, FC & MU type connectors. Definable values from 1db to 20db. Easy to use, no cleave cost effective factory terminated splice-on connectors.
FIBRE OPTIC PATCH CORDS Carrier grade, Singlemode & Multimode (OM1, 2 , 3 & 4). SC, FC, ST, LC, MU & MPO types. Custom made to specification.
15
FIBRE CLEANING PRODUCTS ONE CLICK CONNECTOR CLEANERS & CLETOPS
Easy & efficient cleaning of patch cords & bulkhead connectors, 500 + operations. Cleans APC & UPC connectors. Models for ST, SC, FC, LC, Dual LC and MU connectors. MPO / MTP and Outdoor Connectors. CLETOP Cleaners
16
FIBRE CONNECTOR CLEANER Non-pressured pump action container. Not hazardous, nonflammable & environmentally safe. Residue-free solvent engineered to clean connector end faces.
FIBRE FUSION SPLICER RANGE FIBERFOX 6S FUSION SPLICER The Fiberfox Mini 6S is one of the most compact core alignment fusion splicer on the market today. Excellent portability , reliability and robustness. Whether you are experienced or a beginner in fusion splicing the Mini 6S provides simplicity and efficiency under any environmental working conditions. Splice Time: 12s average SM Heating Time: Typical 18s Accuracy: Typical 0.01dB
FIBERFOX 6R RIBBON FUSION SPLICER The FiberFox Mini 6R is the smallest Ribbon splicer on the market today. Excellent portability , reliability and robustness. Whether you are experienced or a beginner in splicing the Mini 6R provides simplicity and efficiency under any environmental working conditions. Splicing Time: 15 sec (12 Fibres) Heating Time: Typical 20s Typical Splice Loss: 0.03dB (SM) 0.02dB (MM)
17
TECHTABLE™ Features: • Efficiency: Up to 24% labour time saving • Performance: Consistent quality terminations • Comfort: Ergonomic, reduces downtime • Attachable hard top: adaptability for multiple tasks • Large tool tray: to keep tools organised and within reach • Height adjustable: allowing technicians to terminate at a comfortable height. Light Weight collapsible aluminium legs: to allow easy transportation • TIG Welded aluminium cross bracing: added strength and stability • No mark polyurethane feet: added stability and wont damage floors • Optimum manual handling working height: allows technicians to perform the task at waist height and easily rotate between standing and seated positions • Large 10RU working platform: space for technicians to terminate simultaneously either end
18
OUR PRINCIPALS:
FiberFox
MASTER INSTRUMENTS
Australian Tel-Tec ABN 84 006 331 059 Scan for additional company and product information
Unit 2 / 14 Leighton Place Hornsby NSW 2077 (02) 9482 4533 1800 501 314
[email protected] www.teltec.com.au
Distributed by:
