Transcript
CMA-2001, CMA-3001, CMA-3002
PRODUCT LINE: Accessories
I N C O R P O R A T E D
Photo Not Yet Available
CATEGORY: Chassis Mount Adapter
CMA-3002
FEATURES
DESCRIPTION
● Alignment pins on the Chassis Mount Adapater assure proper mating between power connectors on the fiber optic isolators and the rack mount chassis power bus.
The CMA-2001, CMA-3001, and CMA-3002 chassis mount adapters are required to securely hold each fiber optic isolator or interface converter installed in a rack mount chassis.
● Easy front or rear access to both the fiber optic and electrical interface connectors when inside the rack mount chassis.
FiberPlex, Inc. 10840-412 Guilford Rd
Annapolis Junction Maryland 20701
Chassis Mount Adapter
Model
Rack Mount Chassis
CMA-2001
FOI-2xxx FOI-4xxx
RMC-2101 RMC-2201
CMA-3001
ASC-xxxx ICM-xxxx
RMC-3101 RMC-3201
CMA-3002
FOI-2xxx FOI-4xxx
RMC-3101 RMC-3102 RMC-3201 RMC-4101
Phone: Fax:
301-604-0100 301-604-0773
www.fiberplex.com
[email protected]
5/24/07 page 1 of 2
CMA-2001, CMA-3001, CMA-3002
I N C O R P O R A T E D
SPECIFICATIONS
Dimensions
width
height
length
unit
CMA-2001
6.375
2.844
1.485
inches
CMA-3001
9.5
3.468
1.562
inches
CMA-3002
9.559
3.468
1.57
inches
INSTALLATION INSTRUCTIONS Two mounting holes on the CMA’s base plate flange, align with the threaded holes on the fiber optic isolator unit, above the power jack. A banana plug is supplied to fasten the two units together. The mounting plate, with a banana jack, may be installed in the chassis with the three 4-40 screws supplied.
CMA-3002
Banana Plug (1)
Banana Jack (1) Mounting Plate PN 113723 4-40 Screws (3)
FiberPlex, Inc. 10840-412 Guilford Rd
Annapolis Junction Maryland 20701
Phone: Fax:
301-604-0100 301-604-0773
www.fiberplex.com
[email protected]
5/24/07 page 2 of 2
