Transcript
FRAME ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
SKU E87678 140593 05130 05131 730175 E87635 E85358 E87636 62714 70015 70017 E87637 80623 E87638 87156 87173 89051 E87680 89137 E88360 E87260
QTY 1 1 1 1 2 4 12 2 2 2 20 4 8 4 4 4 2 1 8
Description TRANSAXLE, 90VDC.13HP BRUSH SET, TRANSAXLE 05120 CCL ARM, BRUSH HOUSING RIGHT ARM, BRUSH HOUSING LEFT STRAIN RELIEF, 18/3 STR.75 CASTER, 4 DIA X 2W X 3.56R NUT,1/4-20 HEX NYLOCK NUT, 3/8-16 HEX NYLOCK PLATE, DRIVE AXLE SCR, 1/4--20x 3/4 HHCS SS SCR, 1/4-20 X 2.50 HHCS SS SCR, 3/8-16 X 1.00 HHCS GR5 RING, 3/4 RETAINING HD SH WASHER, 3/8 X 7/8 FLAT SS WASHER, 3/4 X 1.25 NYL WASHER, .77 X 1.31 FLAT SS WHEEL, VAC SHOE WHEEL ASM. FRAME, WELDMENT BEARING, ROLLER CLUTCH 1OD X.751D NUT, 3/8-16 SERRATED FLG BFP20 86038490 05/11/07 5-2
PUMP ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13
SKU 20042 E87272 E87526 E87248 E87249 E87250 40010 40034 E87515 E87401 E87400 E87561 E87599
QTY 5 1 2 1 1 1 3 1 6 1 6 -
Description CLAMP, 3/8 WORM GEAR COVER, PUMP ELBOW, 3/8 FPT PVC SCH 80 HOSE, 3/8 WIRE BOUND X 7 HOSE, 3/8 NYLOBRAID X 2 HOSE, 3/8 NYLOBRAID X 33 HOSEBARB, 3/8 MPT X 3/8 HOSEBARB, 3/8 MPT X 3/8 9OD BRASS NUT, 10-32 HEX NYLOCK PUMP ASSEMBLY STRAINER, DEEP 3/8 NPT 80 MESH WASHER, #10 X 9/16 FLAT SCREEN, 80 MESH STAINER DEEP BFP20 86038490 05/11/07 5-4
BRUSH ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
SKU E87543 E87540 E87500 E87733 E87402 E87403 E87383 E87384 E87727 E87719 E87718 E87515 E85358 57113 E87243 E87477 E87433 E87478 E87269 E87246 70017 E87259 E87244 70302 E87476 E87268 E87247 E87623 E87693 89051 E87223 E87245 E87596
QTY 1 1 5 2 1 1 2 1 1
11 1 4 1 1 1 2 1 2 1 3 11 4 4 2 2 8 2 2 1 1 -
Description AXLE, .5 X 19.5 X 1/4-20 AXLE, .5 X 4.34 W/ FLATS BEARING, 1.1250D X .501D X.375 BEARING, FLANGE BELT, TIMING.375P 16.5PL .5W BRUSH, 18L X 4.50D COUPLER, 1/2 JAW COUPLER, SPIDER GUARD, SPLASH IDLER ASSEMBLY, BRUSH MOTOR ASSEMBLY, BRUSH NUT, 10-32 HEX NYLOCK NUT, 1/4-20 HEX NYLOCK NOT, 5/16-18 HEX NYLOCK PLATE, BELT ADJUSTMENT PULLEY, TIMING 2.029PD X.375P PULLEY, TIMING.375P 10T .SID RING, 1.13 RETAINING HO RETAINER, SPLASH GUARD SCR, 1/4-20 X 5/8 HHCS SS SCR, 1/4-20 X 2.50 HHCS SS SCR, 1/4-20 X 1/4 SH KCP SCR, 10-32 X 5/8 PPHMS SCR, 5/16-18 X 1.00 HHCS GR5 SCR, 6-32 X 1/2 PFHMS PLTD WASHER, .506 X.94 NYL WASHER, 1/4 EXT. STAR SS WASHER, 5/16 X 3/4 SS WASHER, 1/2 X 1.00 NYL WHEEL, VAC SHOE WELDMENT, BRUSH HOUSING BRKT, BRUSH HOUSING END CAP PULLEY ASSEMBLY, BRUSH BFP20 86038490 05/11/07 5-6
SOLENOID AND MANIFOLD ASSEMBLIES PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
SKU 20042 E87308 E87276 E87275 E87273 E87512 E87728 50947 E87532 E85638 E87306 57028 E87515 66095 E87491 E87244 E87270 E87541 E87307 E87726 E87560 E87488
QTY 3 1 1 1 2 2 2 1 1 1 1 4 1 2 2 1 2 4 1 3 -
Description CLAMP, 3/8 WORM GEAR COVER, BRUSH MOTOR ELBOW, 1/4 NPT STREET HOSEBARB, 1/4 MPT 3/8 HOSEBARB, 1/4 MPT X 3/8H 900 JET, MINI PROMAX BODY JET, MINI PROMAX 9504 LABEL, ADJ INSTRUCTION MANIFOLD NIPPLE, 1/4 FPT QD NIPPLE, 1/4 X 1.5 NUT, 10-24 TINNERMAN NUT, 10-32 HEX NYLOCK PLUG, 1/8 MPT HEX BRASS SCR, #10 X 3/4 PHST TYPE B SCR, 10-32 X 5/8 PPHMS SCR, 10-32 X 3/8 PPHMS SS SCR, #10 X 3/8 PHSM TYPE B BLK TEE, 1/4 STREET SOLENOID ASSEMBLY WASHER, #10 EXT. STAR SS MANIFOLD ASSEMBLY BFP20 86038490 05/11/07 5-8
VACUUM SHOE ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
SKU 05130 05131 E88576 E87386 89162 E87742 E87260 E85358 E87636 E87535 E87537 66205 66219 66231 67132 67394 70015 E87253 70634 70635 70636 70637 73907 E87574 E87414 87136 87167 89051 E87261 E87442 E87443
QTY 1 1 2 2 1 1 1 15 1 1 1 1 2 2 3 1 4 1 5 2 2 2 1 1 15 4 1 2 1 1 1
Description ARM, BRUSH HOUSING RIGHT ARM, BRUSH HOUSING LEFT BEARING, 1/2 NYLINER SI BUSHING, BRZ FLG.50 X.75 X.75 WELDMENT, HEIGHT ADJ ROD KNOB, 1.380D X 3/8-16 X 3.00 NUT, 3/8-16 HEX FLG NUT, 1/4-20 HEX NYLOCK NUT, 3/8-16 HEX NYLOCK PLATE, VAC PLATE, VAC TRAP PIN, ROLL 3/16 X 1.13 PIN, COTTER HAIR.059 X 1 PIN, CLEVIS 1/4 X 1.75 RING, 1/2 RETAINING HD SH ROD, VAC PIVOT SCR, 1/4-20 X 3/4 HHCS SS SCR, 3/8-16 X 1.5 CARRIAGE PLTD SCR, 1/4-20 X 1.25 CARRIAGE SCR, 1/4-20 X 2.0 CARRIAGE SCR, 1/4-20 X 2.5 CARRIAGE SCR, 1/4-20 X 1.5 CARRIAGE SPRING, COMP .5501D X.7200D X.085W VACUUM SHOE, INSERT WASHER, 1/4 X 5/8 FLAT SS WASHER, .52 X.88 FLAT WASHER, .39 X 1.50 FLAT WHEEL, VAC SHOE BRKT, VAC SHOE ADJ. WELDMENT CUFF, BLK VAC HOSE HOSE, 1.5 BLK VAC X 30 BFP20 86038490 05/11/07 5-10
LIFT LEVER AND LOWER TOWER ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
SKU E87539 20086 E87438 E87162 E87441 E87260 E85358 E81063 E87597 70018 70187 E87637 E87239 E87598 E87623 E83269 E87693 E87697 E87538 E87163 E87590 140317 87024
QTY 2 1 2 1 2 4 3 2 1 1 2 4 2 1 1 2 1 1 2 1 1 1 8
Description BEARING, FLANGED.3131D X.5020D CLAMP, CORD CABLE, 25 X 3/32 X 1/4 EYE X 1/4 STUD GRIP, 3/16 X 1.0 FLAT BAR NUT, 1/4-20 HEX NUT, 3/8-16 HEX FLG NUT, 1/4-20 HEX NYLOCK NUT, 5/16-18 HEX NYLOCK PIN, CLEVIS 5/16 X 2.75 SCR, 1/4-20 X 1.00 HHCS SS SCR, 10-24 X 1/2 PHTC -FSCR, 3/8-16 X 1.00 HHCS GR5 SCR, 5/16-18 X 1.25 HHCS GR5 COTTER, 5/16 RING WASHER, 5/16 X 3/4 SS WASHER, WAVE 1/21D X 3/4D X.125 WASHER, 1/2 X 1.00 NYL WELDMENT, POST LOWER CONTROL WHEEL, 20D X.31 ID X.88W PLASTIC BRKT, LIFT LEVER HANDLE BRKT, LIFT LEVER BASE BUSHING, 1.5 HOLE SNAP WASHER, 3/8 STAR BFP20 86038490 05/11/07 5-12
UPPER TOWER ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
SKU 9128 27779 E87412 E85358 E87636 57163 61346 70094 E87259 70187 70401 70554 E87529 73210 E87638 E87560 89133 89138
QTY 2 1 2 1 2 2 1 1 2 2 2 2 2 1 4 2 1 1
Description BEARING, 1/4 NYLINER SI COLLAR, .750D X.281 ID X 1.875 GRIP, .8131D X .085W X 13.OL PVC NUT, 1/4-20 HEX NYLOCK NUT, 3/8-16 HEX NYLOCK NUT, 4-40 HEX W/ STAR PANEL, CONTROL SCR, 1/4-20 X 1/2 SHCS SCR, 1/4-20 X 1/4 SH KCP SCR, 10-24 X 1/2 PHTC -FSCR, 4-40 X 1.25 PPHMS SCR, 3/8-16 X 3.50 HHCS GR5 SWITCH, 10A ROLLER MINI SPRING, EXT.36D X 1.5L X.058W WASHER, 3/8 X 7/8 FLAT SS WASHER, #10 EXT STAR SS HANDLE, WELDMENT WELDMENT, PROPEL CONTROL BFP20 86038490 05/11/07 5-14
CONTROL PANEL ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
SKU E87352 E87503 E87504 E87505 E87404 27417 E87409 27795 E87344 E87981 57026 57040 57106 E87293 70219 E87541 E87405 E87609 87100 E87294 500235 500079 50279 27049 5153 57049
QTY 1 1 1 3 1 1 1 1 1 1 2 1 2 1 2 4 1 1 4 2.8' 1 1 1 1 1 1
Description BREAKER, 250VAC, 50VDC BREAKER, 15A 250VAC, 50VDC BREAKER, 6A VDE BOOT, 3/8 CIRCUIT BREAKER CORD ASM, 12/3 PIGTAIL X 24" CORD, 99807 1/8 X 12 CONTROL PROPEL BOARD 115/240V COVER, PROPEL BOARD KNOB, SPEED CONTROL LABEL, CONTROL PANEL NUT, 8-32 HEX NYLOCK NUT, 1/2 NPT CONDUIT NUT, 8-32 HEX W/ STAR PLATE, CONTROL PANEL SCR, #6 X 1/2 SHT MTL BLK SCR, #10 X 3/8 PHSM TYPE B BLK SWITCH, DPDT 2-POSITION ROCKER SWITCH, SPST 2-POSITION ROCKER WASHER, 3/8 INT STAR GASKET, 1/8 X 1/2 1SDA FOAM BLK CARD, INSTRUCTION LABEL, CIRCUIT BREAKER LABEL, GROUND SYMBOL CABLE TIE, 7" ANCHOR, CABLE TIE #8 MOUNT NUT, 6-32 HEX NYLOCK BFP20 86038490 05/11/07 5-16
SOLUTION TANK ASSEMBLY PARTS LIST Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
SKU 20042 E87613 20063 E87442 27417 35226 39337 E87633 E87251 E87496 E87497 E87393 E87406 E87161 E87271 E85358 62691 62754 70018 70187 70375 E87471 E87414 E87560 E87623 87067
QTY 1 2 1 1 1 1 1 1 1 1 1 1 4 1 1 4 1 6 1 4 1 6 6
Description CLAMP, 3/8 WORM GEAR CLAMP, 2.25 WORM GEAR CLAMP, 1.75 WORM GEAR X.312 CUFF, BLK VAC HOSE CORD, 99807 1/8 X 12 GASKET, DOME 91D X 30.75L HOSE, 1.5 BLUE VAC X 24 HOSE, 2" VAC X 20" HOSE, DRAIN X 44" HOSEBARB, 1/2 MPT X 3/8 NYLON HOSEBARB, 1/2 MPT X 1/2 HOSE 90 LID, SOLUTION TANK VAC MOTOR ASSEMBLY BRUSH SET, 120V 5.7 VAC AMETEK BRUSH SET, 120V VAC WINDSOR NUT, 1/4-20 HEX NYLOCK PLATE, VAC MOTOR PLATE, VAC MOTOR COOLING SCR, 1/4-20 X 1.00 HHCS SS SCR, 10-24 X 1/2 PHTC -FSCR, 5/16-18 X 1/2 HHCS GR5 TANK, SOLUTION WASHER, 1/4 X 5/8 FLAT SS WASHER, #10 EXT STAR SS WASHER, 5/16 X 3/4 SS WASHER, 5/16 INT STAR BFP20 86038490 05/11/07 5/18
RECOVERY TANK ASSEMBLY PARTS LIST Item 1 2 3A 3B 5 6 7 8 9 10 11 12A 12B 13 14 15 16 17 18A 18B 19 20 21 22 23 24 25 26 27A 27B 28 29 30 31
SKU 14665 E87615 E85458 E85358 27765 E87407 E87408 E87489 E87410 E87616 40013 E87168 E87619 50911 50912 E87515 E87490 57044 E87573 E87620 E87244 70274 70302 75244 78390 E87561 E87623 87067 140408 E87563 E87542 E87252 E87551 E87411
QTY 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 1 4 6 1 1 1 8 1 1 1 1 1 1 1 -
Description BRKT, PT17 SIGHT TUBE TETHER, DRAIN PLUG CLAMP, 2.0 WORM GEAR X.312 CLAMP, 2.0" NYLON RATCHET COVER, CMD20 REAR DOME, CMD20 FLOAT BALL, VAC SHUT OFF GASKET, 1-1/2 COMPRESSION GASKET, CMD20 DOME HOSE, 1.5 X 24.0 DRAIN HOSEBARB, 3/8MPT X 1/2HOSE HOSE, INSERT HOSEBARB, 1.5 DOUBLE MCHD LABEL, CMD20 RIGHT LABEL, CMD20 LEFT NUT, 10-32 HEX NYLCK NUT, 1.5 SLIP JOINT NUT, 3/8 NPT HEX BRASS HOSE,CAP PLUG, DRAIN HOSE SCR, 10-32 X 5/8 PPHMS SCR, 5/16-18 X 3/4 FHMS BLK OX SCR, 5/16-18 X 1.00 HHCS GR5 TANK, RECOVERY CMD 20 TUBE, 1.5 WASTE WASHER, #10 X 9/16 FLAT WASHER, 5/16 X 3/4 SS WASHER, 5/16 INT STAR BRKT, HOSE HOOK BRKT, RECOVERY HOSE MTG CUFF, HOSE 1.5" BLK A 2126 HOSE, 1.5 BLK VAC X 52" LABEL, BETCO LOGO (GRAY) DOME ASSEMBLY BFP20 86038490 05/11/07 5-20
SUGGESTED SPARE PARTS SKU E87500 E87402 E87741 E85135 E87442 E87410 36054 E87252 44051 44062 72004 73250 E87402 E87403 E87352 E87503 E87504 E87438 E87411 E87410 39315 E87719 E87728 E87406 E87488 E87596 E87401 E87405 E87609 E87599 E87726 E87161 E87271
Description BEARING, 1.1250D X .5001D X .375 BELT, BRUSH DRIVE CORD SET, 14.3 SJTW-A X 50' YELLOW CORD END, 125V 15A M NEMA5-15P CUFF, BLK 1.91D VAC HOSE X 4.07 GASKET, DOME GUARD, THREAD HOSE, 1.5 BLU VAC X 52" JET SEAL, MINI-QUICK JET, 110015 MINI-QUICK SWITCH, 125V SPST LIT RCKR STRAINER, 3/8 FPT 80 MESH BELT, TIMING.375P 16.5PL .5W BRUSH, 18L X 4.50D BREAKER, 8A CIRCUIT BREAKER, 15A 250VAC 50VDC BREAKER, 6A VDE CIRCUIT CABLE, 25 X 3/32 1/4 EYE X 1/4 STUD DOME ASM GASKET, DOME HOSE, 1.5 BLU VAC X 28" IDLER ASM, BRUSH JET, MINI PROMAX 9504 VAC MOTOR ASM MANIFOLD ASM PULLEY ASM, BRUSH PUMP ASM, 115V SWITCH, DPDT 2-POSITION ROCKER SWITCH, SPST 2-POSITION ROCKER SCREEN, 80 MESH STRAINER DEEP SOLENOID ASM BRUSH SET, 120V 5.7 VAC AMETEK BRUSH SET, 120V VAC WINDSOR BFP20 86038490 05/11/07 05-21
BETCO US WARRANTY POLICY 10 year coverage
3 Year Coverage
1 Year Coverage
Subject to the conditions stated below, Betco warrants parts and labor on rotationally molded polyethylene tanks/ housings and injection molded vacuum head assemblies to be free from defects in materials and workmanship for a period of ten years to the original purchaser.
Subject to the conditions stated below, Betco warrants parts and labor on all other Betco components to be free from defects in materials and workmanship for a period of three years to the original purchaser.
Subject to the conditions stated below, Betco offers a limited warranty on parts and labor on the following equipment: parts and accessories to be free from defects in materials and workmanship for a period of one year to the original purchaser. • DM Series Vacuums: #85506-00, #85507-00 • Bac Pac Lite Vacuum: #85903-00 • FiberPRO® Floor Dryer: #85507-00 • WORKMAN™ Series Vacuums: #85024-00, #85025-00, #85026-00, #85027-00 • CV100T Vacuum: #85023-00 • All Tools and Accessories • All Battery Chargers • All Batteries are pro-rated for 1 year
Allowable Travel Time Warranty Reimbursement: Eligible equipment: All battery and propane powered equipment products. Warranty period: 90 days from date of sale to the original purchaser. A maximum 60 mile round trip at 44 cents per mile will be allowed for warranty consideration. Propane Machine Warranty: Honda engines are warranted by Honda for a period of 2 years against manufacturer defects. Kawasaki engines are warranted by Kawasaki for a period of 2 years against manufacturer defects. All other components (except wear items)* are warranted by Betco for a period of 3 years. *Wear Items exempt from Warranty consideration include but may not be limited to: power cords, transport wheels, vacuum bags, belts, squeegee blades, pad drivers, clutch plates, handle grips, filters, screens, throttle cables, brushes and carbon brushes. Subject to the conditions and exceptions stated in this warranty, Betco warrants the Betco products to be free from defects in material and workmanship, under normal use and service, for the periods listed under the warranty policy to the original purchaser. At any time during the warranty period, Betco will furnish replacement parts for the Betco parts to the original purchaser. Such parts will be furnished and charged including transportation costs, to the original owner through any Betco authorized Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling. Replacement parts that have become defective through wear or abuse are not included in this warranty. This warranty does not apply to damage or defect caused by accident, misuse. Negligence, fire, or to any Betco product which has been serviced or repaired by other than an authorized Betco Service Distributor or Betco factory personnel. This warranty is void if products are used for any purpose other than that which was intended. There are no other warranties expressed or implied. In no event shall Betco be liable for incidental or consequential damages or any damage to person or property. (Please note some states do not allow the exclusion or limitations for incidental and consequential damages)
48
1001 Brown Avenue • Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com
E87028-00 June10C
