Transcript
05_FbrRun_.fm Seite 93 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER ™ ROUTING SYSTEM
QUIKLOCK ™ Components save time
Multiple spillout options provide flexibility FIBERRUNNER 150mm x 100mm Cable Routing System
The PANDUIT NETWORK CONNECTIVITY GROUP provides leading solutions for cable routing. These routing products are compatible with our cable management solutions increasing your ability to maintain an orderly and clean work environment; implement quick and easy moves, adds and changes; and maintain the integrity of your fibre and copper cabling plant in order to maximize long term performance. The FIBERRUNNER Routing System provides an integrated routing solution that can be used with PANDUIT's cable management rack system. The system is designed to segregate, route, and protect fibre-optic and copper cabling to and between racks within the communications closet. The FIBERRUNNER Routing System features: Encloses cables for a secure installation, with easy access for future moves, adds and changes. System size, is 150mm x 100mm to distribute moderate to large amounts of cable. 2 available system colours, Yellow (denotes singlemode fibre), Orange (denotes multimode fibre). Complete offering of fittings, accessories and brackets. A minimum 50mm bend radius control in standard fittings to protect against signal loss due to excessive cable bends.
Sold exclusively through authorized PANDUIT distributors.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 93 - Datum: 8/8/01
93
05_FbrRun_.fm Seite 94 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER ™ Routing System Roadmap 8
7
16
4 3
10
15 9
19
1 14 2
12 22 6 13
11
18
20
5
17
21
1
150mm x 100mm FIBERRUNNER Solid Wall Channel
12 Split Cover for 150mm x 100mm
2
150mm x 100mm Hinged Cover
13 150mm x 100mm Vertical Tee Fitting
3
QuikLock Coupler Fitting
14 150mm x 100mm Right Angle Fitting
4
150mm x 100mm Inside Vertical 45˚ Angle
15 Split Cover for 150mm x 100mm
150mm x 100mm Outside Vertical Right Angle
16 150mm x 100mm to 100mm x 100mm
5
Right Angle Fitting Reducer Fitting
Cover for 150mm x 100mm 6 Split Outside Vertical Right Angle
17 3 Sided BRC Trumpet Spillout for
7
150mm x 100mm Outside Vertical 45˚ Angle
18 150mm x 100mm End Cap Fitting
8
Split Cover for 150mm x 100mm Outside Vertical 45˚ Angle
Spill-Over Junction for 19 Snap-On 150mm x 100mm System
9
150mm x 100mm Four Way Cross Fitting
QUIKLOCK Bracket Kit for 20 150mm New Threaded Rod Assembly
100mm x 100mm opening
10 Split Cover for 150mm x 100mm
21 Slotted FIBER-DUCT ™
11 150mm x 100mm
22 Deluxe 2 Port Spillout to 50mm
Four Way Cross Fitting Horizontal Tee Fitting
94
CYAN
Horizontal Tee Fitting
Corrugated Tubing
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 94 - Datum: 8/8/01
05_FbrRun_.fm Seite 95 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER ™ ROUTING SYSTEM FIBERRUNNER Routing System • UL Compliant The FIBERRUNNER 150mm x 100mm Routing System is a system of channel, fittings and brackets designed to segregate, route and protect fibre-optic and high performance copper cabling runs to and between equipment racks within a telecommunications room or service provider facility.
FIBERRUNNER Routing System features include: • Robust, large capacity 150mm x 100mm system Excellent for use in: ideal for use with large optical fibre cable counts • Multiple spill out options provide versatility to mate to various equipment and rack configurations • QUIKLOCK ™ couplers, tee fittings and brackets reduce system installation time dramatically • Channel, covers, fittings and other non-metallic system components made from V-0 rated material • Compatible with PANDUIT ™ FIBER-DUCT ™ 100mm x 100mm and 50mm x 50mm routing system
• Service Provider Facilities • Central Offices • Telecommunications Closets • Equipment rooms • Entrance facilities • Appropriate floor and ceiling spaces
FIBERRUNNER Routing System Channel Part Number
Description
Colour‡
Std. Pkg. Qty.
Std. Ctn. Qty.
2m
8m
2m
8m
150mm x 100mm Solid Wall Channel Base FR6X4YL2 FR6X4OR2 FR6X4
150mm x 100mm FIBERRUNNER Channel Base, 2m lengths. Yellow Primarily used to carry the fibre cables horizontally throughout the Orange system. Accepts hinged cable retainers FRCR6BL or FRHC6 hinged cover. Section connects with FRBC6x4 and FRCC6x4 couplers.
150mm x 100mm Snap-On Hinged Cover FRHC6YL2 FRHC6OR2
Snap-on hinged channel cover for FR6x4 Base. Hinge feature enable positioning of cover at angles between 30˚ and 90˚. Available in 2m lengths.
Yellow Orange
Cable Retainer for 150mm x 100mm FIBERRUNNER FRCR6BL
FRHC6
Cable retainer retains cable in the channel when cover is not used.Install on channel near the coupler or every meter.
Black
10 pcs. 100 pcs.
‡Channel base and hinged cover are PVC material and Fittings are ABS materials. ORDERING INFORMATION: Order number of meters required, in multiples of Standard Length Increment.
FRCR6
FIBERRUNNER Coupler Fittings Part Number
Description
Std. Pkg. Colours‡ Qty.
Std. Ctn. Qty.
150mm x 100mm QUIKLOCK Coupler FRBC6X4
FRBC6X4YL FRBC6X4OR
Pre-assembled coupler quickly joins 2 sections of channel base and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary.
Yellow Orange
1 pc.
5 pcs.
Mechanically joins 2 sections of Channel base and/or fitting. Requires tightening of 3 bolts, using 3/8" nut driver to secure assembly.
Yellow Orange
1 pc.
5 pcs.
Drop-in coupler allows a vertical tee, or any other 150mm x 100mm fitting, to be inserted into an existing 150mm x 100mm installation. A channel section is cut and removed to allow installation. Use 3/8" nut driver to secure assembly.
Yellow Orange
1 pc.
5 pcs.
Standard Bolt-on Coupler FRCC6X4
FRCC6X4YL FRCC6X4OR
Drop in Coupler FRDCF6X4YL FRDCF6X4OR
FRDCF6X4
ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity. For Technical Assistance, refer to inside back cover for your local PANDUIT Sales Office.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 95 - Datum: 8/8/01
95
05_FbrRun_.fm Seite 96 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER System Fittings Part Number
Std. Pkg. Colours‡ Qty.
Description
Std. Ctn. Qty.
150mm x 100mm Horizontal Tee Fitting FRT6X4YL FRT6X4OR
Attaches to 150mm x 100mm channel base and/or fittings to create a 90˚ horizontal branch from straight horizontal runs. Requires three (FRBC or FRCC) couplers for assembly. Accepts optional FRTSC6 split cover.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Black
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
1 pc.
Yellow Orange
1 pc.
5 pcs.
Split Cover for 150mm x 100mm Horizontal Tee Fitting (Optional) FRTSC6
FRT6X4
FRTSC6YL FRTSC6OR
Optional split cover for the FRT6x4** Horizontal Tee Fitting. Snap-on features allows cover to be installed and removed with no tools required. Creates radiused 19mm opening for easy access to add or remove fibre cables.
150mm x 100mm Right Angle Fitting FRRA6X4YL FRRA6X4OR
FRRA6X4
FRRASC6
Attaches to 150mm x 100mm channel base and/or fitting to create a 90˚ horizontal turn from a straight horizontal run. Requires two (FRBC or FRCC) couplers for assembly. Accepts optional FRRASC6 split cover.
Split cover for 150mm x 100mm Right Angle Fitting FRRASC6YL FRRASC6OR
Optional split for the FRRA6x4** Right Angle Fitting. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 19mm opening for easy access to add or remove fibre cables.
150mm x 100mm Horizontal 45˚ Angle Fitting FRH456X4YL FRH456X4OR FRH456X4*
FRH45SC6*
Attaches to 150mm x 100mm channel base and/or fitting to create a 45˚ horizontal turn from a straight horizontal run. Requires two (FRBC or FRCC) couplers for assembly. Accepts optional FRH45SC6 split cover.
Split cover for 150mm x 100mm Horizontal 45˚ Angle Fitting FRH45SC6YL FRH45SC6OR
Optional split cover for the FRH456X4** Horizontal 45˚ Angle Fitting. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 19mm opening for easy access to add or remove fibre cables.
150mm x 100mm Four Way Cross Fitting FRFWC6X4
FRFWCSC6
FRFWC6X4YL FRFWC6X4OR
Used to branch off at a horizontal four way cross intersection. Requires four (FRBC or FRCC) couplers for assembly. Accepts optional FRFWCSC6 split cover.
Split Cover for 150mm x 100mm Four Way Cross Fitting FRFWCSC6YL FRFWCSC6OR
Optional Split cover for the FRFWC6x4 Four Way Cross Fitting. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 19mm opening for easy access to add or remove fibre cables.
150mm x 100mm QUIKLOCK ™ Vertical Tee Fitting
FRVT6X4
FRVT6X4YL FRVT6X4OR
Attaches to 150mm x 100mm channel base and/or fittings to create a 90˚ vertical drop from horizontal runs. Requires two (FRBC or FRCC) couplers for assembly. Accepts FIDT4x4, FTR4x4 fittings, or S4x4, E4x4 directly. Accepts optional FRHC6 snap-on cover.
Deluxe 2 Port Spillout to 50mm Corrugated Tubing FIDT4X4BL FIDT4X4BL
FTR4X4
Used to route cable into one or two 50mm split corrugated tubing. Used in with FRVT6X4YL or FVT4x4. Securely holds corrugated split tubing to ensure system integrity and easy access to add or remove Fibre Cables.
3 Sided BRC Trumpet Spillout for 100mm x 100mm Opening FTR4X4YL FTR4X4OR
The 3 sided bend radius control trumpet is used to limit the bend of the fibre when exiting from a vertical tee.
Snap-On Spill-Over Junction for 150mm x 100mm System FRSPYL FRSPOR
Snaps onto 150mm x 100mm channel base spilling over the side into a 50mm x 50mm vertical channel, fitting or corrugated tube. Mounts directly to existing installation with no alteration required.
Cover for Spill-Over Junction FRSP
FRSP6C
FRSP6CYL FRSP6COR
Used to fully enclose150mm x 100mm channel in conjunction with the spill-over junction (FRSPYL). Cover snaps on to the channel base. Hinged feature allows easy access to add cables.
‡All channel base and hinged cover parts are PVC material all fittings are ABS materials. ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity. **Colour choice of YL (Yellow) or OR (Orange).
96
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 96 - Datum: 8/8/01
05_FbrRun_.fm Seite 97 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER ™ ROUTING SYSTEM FIBERRUNNER System Fittings (Continued) Part Number
Description
Std. Pkg. Colours‡ Qty.
Std. Ctn. Qty.
150mm x 100mm Outside Vertical Right Angle FROVRA6X4YL FROVRA6X4OR
Attaches to 150mm x 100mm channel base and/or fittings to create a 90˚ vertical turn down from a straight horizontal run. Requires two (FRBC or FRCC) couplers for assembly. Accepts optional FROVRASC6 split cover.
Yellow Orange
1 pc.
5 pcs.
Optional Split Cover for the FROVRA6x4 Outside Vertical Yellow Right Angle Fitting. Snap-on feature allows cover to be Orange installed and removed with no tools required. Radiused 19mm opening for easy access to add or removed fibre cables.
1 pc.
5 pcs.
1 pc.
5 pcs.
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
Yellow Orange
1 pc.
5 pcs.
1 pc.
5 pcs.
Split Cover for 150mm x 100mm Outside Vertical Right Angle FROVRASC6
FROVRA6X4
FROVRASC6YL FROVRASC6OR
150mm x 100mm Inside Vertical 45˚ Angle FRIV456X4YL FRIV456X4OR
Attaches to 150mm x 100mm channel base and/or fitting Yellow to create a 45˚ upward angle. Requires two (FRBC or Orange FRCC) couplers for assembly. Used with FROV456X4 fitting to change level of straight horizontal runs. Includes split cover
150mm x 100mm Outside Vertical 45˚ Angle
FRIV456X4
FROV456X4YL FROV456X4OR
Attaches to 150mm x 100mm channel base and/or fitting Yellow to create a 45˚ downward angle. Requires two (FRBC or Orange FRCC) couplers for assembly. Used with FRIV456X4 fitting to change level of straight horizontal runs. Accepts optional FROV45SC6 split cover.
Split Cover for 150mm x 100mm Outside Vertical 45˚ Angle FROV45SC6YL FROV45SC6OR FROV456X4
FROV45SC6
Optional split cover for the FROV456x4 Outside Vertical 45˚ fitting. Snap-on feature allows cover to be installed and removed with no tools required. Radiused 19mm opening for easy access to add or remove fibre cables.
150mm x 100mm End Cap Fitting FREC6X4YL FREC6X4OR
Used for closing off open ends of the channel or fittings. No coupler required push-on installation.
150mm x 100mm to 100mm x 100mm FIBER-DUCT ™ Reducer Fitting FRRF64YL FRRF64OR FREC6X4
FRRF64
Joins any 150mm x 100mm fitting or straight section of channel to the 100mm x 100mm FIBER-DUCT Channel,(S4x4, E4x4). Includes cover. (FRBC or FRCC coupler required).
Adapter from 150mm x 100mm FIBERRUNNER to ADC 150mm x 100mm FRADC6X4YL FRADC6X4OR
Fitting that transitions from ADC's 150mm x 100mm FIBERGUIDE System* to 150mm x 100mm FIBERRUNNER System. Bolts release using 3/8" nut driver to allow coupler to be removed, if necessary.
Yellow Orange
ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity.
FRADC6X4
For Technical Assistance, refer to inside back cover for your local PANDUIT
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 97 - Datum: 8/8/01
™
Sales Office.
97
05_FbrRun_.fm Seite 98 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER Mounting Brackets Part Number
Std. Pkg. Qty.
Description
Std. Ctn. Qty.
150mm QUIKLOCK ™ Bracket kIts for Existing 12mm Threaded Rod Assembly FR6TRBE12M
Used for supporting the 150mm system from any 12mm existing 1 pc. 10 pcs. rod. Bracket is secured with 2 split nuts, accepts 12mm threaded rod (not included), and pre-assembled clamps enable fast assembly to channel. Use 7/16" nut driver on clamps.
FR6TRBE12M FR6TRBE58M
150mm QUIKLOCK Bracket Kit for Existing 16mm Threaded Rod Assembly FR6TRBE58M
FR6TRBN12M FR6TRBN58M
Used for supporting the 150mm system for any 16mm existing rod. Bracket is secured with 2 split nuts, accepts 16mm threaded rod (not included), and pre-assembled clamps enable fast assembly to channel. Use 7/16" nut driver on clamps.
1 pc. 10 pcs.
150mm QUIKLOCK Bracket Kit for New 12mm Threaded Rod Assembly FR6TRBN12M
Used for supporting the 150mm system from any new 16mm threaded rod. Accepts 16mm threaded rod (not Included), and pre-assembled clamps enable fast assembly to channel. Use 7/16" nut driver on clamps.
1 pc. 10 pcs.
150mm QUIKLOCK Bracket Kit for New 16mm Threaded Rod Assembly FR6TRBN58M
Used for supporting 150mm system from any new 16mm threaded rod. Pre-assembled clamp enables fast assembly to channel, and accepts 16mm threaded rod (Not Included). Use 7/16" nut driver on clamps.
FR6LRB
1 pc. 10 pcs.
150mm QUIKLOCK Bracket Kit for 38mm or 50mm Ladder Rack FR6LRB
Used to support 150mm system attaching directly to any 10mm x 1 pc. 10 pcs. 38mm or 10mm x 50mm ladder rack rail. Attach directly to ladder rack, no threaded rod required, and pre-assembled clamps enabled fast assembly to channel. Use 7/16" nut driver on clamps.
150mm QUIKLOCK Bracket Kit for Under-Floor Pedestal
FR6USB
FR6USB
Used to support 150mm system attaching to under floor pedestal. 1 pc. 10 pcs. Contains hardware to attach to pedestal, and pre-assembled clamps enables fast assembly to channel. Use 7/16" nut driver on clamps.
150mm QUIKLOCK “L” Bracket Wall Mount Kit FR6LB FR6LB
Used to support the 150mm system attaching to a wall or the front or 1 pc. 10 pcs. back of an equipment rack. Pre-assembled clamps enable fast assembley to channel. Use 7/16" nut driver on clamps.
Unistrut* Bracket Kit FTRB12M
Bracket attaches to UNISTRUT ® metal framing. Accepts 12mm threaded rod (not included). Contains bracket and hardware for attaching metal framing.
1 pc. 10 pcs.
ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity. *UNISTRUT is a registered trademark of UNISTRUT Corporation.
FTRB12M
FIBERRUNNER Accessories Std. Pkg. Qty.
Std. Ctn. Qty.
3/8" Nut Driver. Used to disassemble coupler when required.
1 pc.
10 pcs.
7/16" Nut Driver. Used to assemble QUIKLOCK Bracket Slide Clamps.
1 pc.
10 pcs.
1 pc.
1 pc.
Part Number
Description
3/8" Nut Driver FR38DR
FR38DR FR716DR
7/16" Nut Driver FR716DR
Mitre box and saw FRCUT
Mitre box and saw used to cut150mm x 100mm FIBERRUNNER, hinged cover, 100mm x 100mm FIBER-DUCT ™, 50mm x 50mm FIBER-DUCT, and 50mm or 100mm cover.
Universal Innerduct Bracket
FRCUT
FRUIB-X
Used to secure any size corrugated tubing or inner-duct to any surface 10 pc. 100 pcs. including equipment racks and channel or fittings. Two 8mm holes must be drilled through to secure brackets.
ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity.
FRUIB-X
98
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 98 - Datum: 8/8/01
05_FbrRun_.fm Seite 99 Mittwoch, 8. August 2001 1:39 13
FIBERRUNNER ™ ROUTING SYSTEM
Corrugated Loom Tubing for Fibre Optic Applications Part Number CLT150F-X20 CLT150F-X3 CLT150F-X4
Material
Inside Diameter mm 39.1
Colour Black Orange Yellow
Polyethylene
Outside Diameter mm 47.2
Meters Per Pkg. 3 3 3
Pkg. Qty. 1 roll 1 roll 1 roll
PANDUIT ™ corrugated loom tubing is a flexible channel that can be utilized to transfer cable from the FIBERRUNNER to the rack. It contains a lengthwise slit that makes it easy to install cables into the tubing. ORDERING INFORMATION: Order number of pieces required, in multiples of Standard Package Quantity. Order number of rolls required.
B Quick Wire Fills for FIBERRUNNER 150mm x 100mm Cable Routing System The maximum amounts may vary according to the cable fill installation methods, straightness of cables, etc. SPEC=40% cablefill—the recommended design in cable capacity. Leaves room for future moves, adds and changes
MAX=60% cablefill—the maximum cable quantity based on cable interweaving and packing factors
Fill Capacity Table for: ·Fibre Optic Cable
171mm
121mm
A=15360mm2
System Type FIBERRUNNER 150mm x 100mm
DIAMETER
DIAMETER
2.0mm
3.0mm
Fibre Cable DIAMETER DIAMETER 8.4mm
12.5mm
DIAMETER 14.5mm
Area (mm2) SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX 150mm x 2163 3021 100mm
928
1342
114
172
51
77
38
57
Channel Cutting Instructions: For small quantities, use a fine tooth handsaw. For larger quantities use a plastic cutting saw blade for clean, burr-free cuts. Recommend: Carbide 80T or 100T;2.29" thickness,.125" kerf.
For Technical Assistance, refer to inside back cover for your local PANDUIT Sales Office.
CYAN
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 99 - Datum: 8/8/01
99
05_FbrRun_.fm Seite 100 Mittwoch, 8. August 2001 1:39 13
NOTES
100
CYAN
Prime Items appear in BOLD.
MAGENTA
YELLOW
BLACK
■ ■ ■ ■ ■ ■ ■ ■ Seite: 100 - Datum: 8/8/01
