Transcript
Fibre Channel Fiber-to-Fiber Media Converters • CM-155-XX
Multi-mode to Single-mode series
• CM-131-XX
Single-mode to Single-mode series
Low
cost
CCM-1600
Fibre
Channel
media
converter modules by Canary Communications provide economical, long-range Gigabit data-
Features include: Features include: •
increased
•
flexibility to storage area network (SAN)
•
design.
•
rate
connections
and
present
Operating at 1.0625 Gigabaud, Canary Fibre Channel
Fiber-to-Fiber
extend
the
reach
multi-mode
and
typically
used
of
media Fibre
single-mode to
link
converters
Channel fiber
storage
over
and
are
devices
•
• • • • •
Supports 1.0625 Gigabaud (Gigabit) data rate Supports 1.0625 Gigabaud (Gigabit) data rate Diagnostic LEDs Diagnostic LEDs Simple plug and go installation Simple plug and go installation Transparent to Flow-Control commands Transparent to Flow-Control commands Additional models include: Long-range singleAdditional models include: Long-range singlemode, Single-Fiber Bi-Directional single-mode, mode, Single-Fiber Bi-Directional single-mode, Extended Reach multi-mode and versions Extended Reach multi-mode and versions launching ITU specified CWDM transmitter launching ITU specified CWDM transmit wavelengths
normally configured with low-cost multi-mode interfaces. intensive
They
are
backbones
in
ideal the
for
data
enterprise
or
across the campus and can be used to create and
take
advantage
of
dispersed
storage
as well as modules for Canary’s CCN2000/CCN-0400
capacity. Use Canary’s Fibre Channel Fiber-
Standard
to-Fiber
ports
storage
converters capacity
to
and
economically remote
or
link
back-up
servers dispersed throughout the network. Canary offers versions using standard duplex fiber optics and versions providing SingleFiber, Bi-Directional links. CWDM
transmission
Models with
wavelengths,
support
chassis
families
are
also available. Fibre
provide
distances
of
Channel minimum 220+
multi-mode transmission
meters
over
62.5/125 µm fiber or 500+ meters over 50.0/125
µm
fiber.
installations,
actual
In
most
transmission
distances are significantly greater. Standard
Fibre
Channel
with
single-mode
channelization for long-distance, point-to-
transmission
point and ring architectures.
10 to 70 kilometers over 9.0/125 µm
Standalone models with similar capabilities
ports
models
Coarse Wavelength Division Multiplexed data
distances
single-mode fiber.
Maximizing storage potential.…..when high speed connections matter
provide ranging
from
ORDERING INFORMATION Model Numbers
Media Types
Min. Tx PWR
Max. Tx PWR
Rx Sensitivity
Min. PWR Budget
Max. PWR Budget
Max. Input PWR
Connector Type
Wavelengths (ηm)
Transmit Distance
CCM converters with standard multi-mode fiber port connectors are designated by (CM-155-XX) or (CM-156XX) and have similar power and sensitivity specifications CM-155-55 **
MM / MM
-9.5 dBm
-4.0 dBm
-17.0 dBm
7.5 dB
13.0 dB
0.0 dBm
SC/SC
850 ηm
220/550 m ea.
CM-156-56 **
MM / MM
-10.0 dBm
-4.0 dBm
-17.0 dBm
7.0 dB
13.0 dB
0.0 dBm
LC/LC
850 ηm
220/550 m ea.
Specifications below for single-mode fiber connectors CM-131-31 **
SM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
SC/SC
1310 ηm
10Km each
CM-155-31
MM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
SC/SC
1310 ηm
550m / 10 Km
CM-156-36
MM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
LC/LC
1310 ηm
550m / 10 Km
CM-155-31E33
MM / SM
-5.0 dBm
0.0 dBm
-24.0 dBm
19.0 dB
24.0 dB
-3.0 dBm
SC/SC
1310 ηm
550m / 30 Km
CM-155-31E45
MM / SM
-5.0 dBm
0.0 dBm
-24.0 dBm
19.0 dB
24.0 dB
-3.0 dBm
SC/SC
1550 ηm
550m / 40 Km
CM-155-31E75
MM / SM
-2.0 dBm
3.0 dBm
-24.0 dBm
22.0 dB
27.0 dB
-3.0 dBm
SC/SC
1550 ηm
550m / 70 Km
** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE: Most versions of CM-1XX-XX converter modules are available as standalone models and as card modules for Canary’s CCN-2000 / CCN-0400 Chassis units. Please refer to the Fibre Channel (standalone) and CCN-20000 / CCN-0400 Data Sheets for more information. More versions of the CM-155-XX series may be found on the Canary web site as they become available.
Fibre Channel, Single-Fiber Bi-Directional, Media Converters • CM-155-37A and CM-155-37B Multi-mode to Single-Fiber, Bi-Directional Single-Mode • CM-131-37A & CM-131-37B Single-mode to Single-Fiber, Bi-Directional Single-mode
Canary’s Fiber Channel CM-155-37A/B multi-mode to Single-Fiber, converters
Bi-Directional
transport
1.0625
single-mode
Gigabaud
Features include:
(Gigabit)
•
Supports 1.0625 Gigabaud (Gigabit) data rate
data-rate traffic, originating at low-cost multi-
•
Diagnostic LEDs
mode ports, across the enterprise via a single
•
Simple plug and go installation
strand of single-mode fiber cable.
•
Transparent to Flow-Control commands
CM-155-37A/B
converters are designed to free-up fiber capacity by
using
dual
wavelengths
transmitted
bi-
directionally over a single strand of a duplex fiber
pair.
They
are
ideal
for
data
intensive
backbones in the enterprise or across the campus where
extra
fiber
capacity
is
lacking
but
additional access is needed for redundancy, to add channels, or for alternate protocols. converters
Canary Single-Fiber converters are
are functionally identical to standard units with
available with 10 kilometer or 20
the
kilometer transmission ranges.
Canary’s
Single-Fiber,
exception
that
Bi-Directional
units
designated
with
an
A
transmit at 1550 ηm and receive on 1310 ηm, while B units transmit at 1310 ηm and receive on 1550 ηm. Single-Fiber
converters
complementary A & B pairs.
must
be
connected
as
Similarly, standalone A
& B units can be connected to complementary A & B modules
used
in
Chassis families.
the
CCN-2000/0400
or
CCM-1600
Standard
CM
provide
minimum
multi-mode
distances
of
220+
ports
transmission meters
over
62.5/125 µm fiber or 500+ meters over 50.0/125 µm fiber.
ORDERING INFORMATION Model Numbers
Media Types
Min. Tx PWR
Max. Tx PWR
Rx Sensitivity
Min. PWR Budget
Max. PWR Budget
Max. Input PWR
Connector Type
Wavelengths (ηm)
Transmit Distance
CCM converters with standard multi-mode fiber port connectors are designated by (CM-155-XX) or (CM-156-XX) and have common power and sensitivity specifications Standard single--mode fiber port connectors are designated by (-31-) e.g. (CM-1XX-31) or (CM-131-XX) with Output PWR: ( -10, -3 dBm) and Sensitivity: ( -20 dBm) CM-155-55 **
MM / MM
-9.5 dBm
-4.0 dBm
-17.0 dBm
7.5 dB
13.0 dB
0.0 dBm
SC/SC
850 ηm
220/550 m ea.
Specifications below for single-mode fiber connectors CM-131-31 **
SM / SM
-10.0 dBm
-3.0 dBm
-20.0 dBm
10.0 dB
17.0 dB
-3.0 dBm
SC/SC
1310 ηm
10Km each
CM-155-37A
MM / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC/SC
1550/1310
550m / 20 Km
CM-155-37B
MM / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC/SC
1310/1550
550m / 20 Km
CM-155-37E4A
MM / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC/SC
1550/1310
550m / 40 Km
CM-155-37E4B
MM / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC/SC
1310/1550
550m / 40 Km
CM-131-37A
SM / SM
-8.0 dBm
-3.0 dBm
-21.0 dBm
13.0 dB
18.0 dB
-3.0 dBm
SC/SC
1550/1310
10 Km / 20 Km
CM-131-37B
SM / SM
-3.0 dBm
2.0 dBm
-23.0 dBm
20.0 dB
25.0 dB
-3.0 dBm
SC/SC
1310/1550
10 Km / 20 Km
** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE: CM-155-37A/B / CM-155-37E4A/B converters are available as standalone models and as card modules for Canary’s CCN-2000 / CCN-0400 Chassis models. Please refer to the Fibre Channel (standalone) and CCN-20000 / CCN-0400 Data Sheets for more information. More versions of the CM-155-37A/B series may be found on the Canary web site as they become available.
Fibre Channel CWDM Fiber-to-Fiber Media Converters
• CM-155W-XX - Multi-mode to Single-mode with ITU / CWDM specified wavelengths
Canary’s Fibre Channel, CM-155W-XX series of Coarse Wavelength Division Multiplexing (CWDM) converters
provide
an
economical
way
to
convert multi-mode, 1.0625 Gigabaud (Gigabit) data-rate
traffic
for
launch
and
transport
through CWDM Multiplexers and provide access
Features include: •
Supports 1.0625 Gigabaud (Gigabit) data rate
•
Diagnostic LEDs
•
Simple plug and go installation
•
Transparent to Flow-Control commands
to high capacity CWDM based networks. Coarse
Wavelength
reduces
network
infrastructure
Division
congestion
Multiplexing
with
investment.
a
Using
minimum discrete
wavelengths (one per channel), multiple data channels can be transported in parallel over a single-mode fiber cable. Channel
traffic
to
CWDM enables Fibre
co-exist
with
Gigabit
Ethernet and Fast Ethernet traffic while being transported together across the network. CM-155W-XX CWDM converters are designed to meet
or
industry needs for an economical way to access
µm fiber.
CWDM
CWDM
point-to-point
networks. Frame
campus
and
metro-ring
They are used with Main Distribution
(central
multiplexers
office)
functionally
identical to standard units with the exception
that
units
at
opposite
with identical wavelengths in order
drop
fiber
to maintain a common channel link
Specific models provide transmission
e.g. if one device is operating at
from
site,
are
50.0/125
ends of a fiber link must be models
traffic
remote
De-
converters
over
Optical
segments.
with
/
meters
Add/Drop Multiplexers (OADMs), to insert and/or optical
and
Multiplexer
500+
single-mode
on one of eighteen discrete λs, each a unique,
1470 ηm, the second must transmit
ITU specified, CWDM wavelength.
and receive on the same wavelength.
available
for
either
40+
kilometer
Kilometer transmission distances. multi-mode
ports
provide
Versions are
minimum
60+
Similarly, a standalone 1470 ηm unit
CM-155W-XX
or
can be connected to a CCM-1600 or
transmission
CCN-2000 / CCN-0400 chassis module
distances of 220+ meters over 62.5/125 µm fiber
with the same wavelength.
ORDERING INFORMATION Model Numbers
Media Types
Min. Tx PWR
Max. Tx PWR
Rx Sensitivity
Min. PWR Budget
Max. PWR Budget
Max. Input PWR
Connector Type
Wavelengths (ηm)
Transmit Distance
CM converters with standard multi-mode fiber port connectors are designated by (CM-155-XX) or (CM-156-XX) and have common power and sensitivity specifications CM-155-55 **
MM / MM
-9.5 dBm
-4.0 dBm
-17.0 dBm
7.5 dB
13.0 dB
0.0 dBm
SC/SC
850 ηm
220/550 m ea.
Specifications below for single-mode CWDM fiber connectors CM-155W-XX *
MM / SM
-5.0 dBm
0.0 dBm
-22.0 dBm
17.0 dB
22.0 dB
-3.0 dBm
SC/SC
CWDM
550m / 40 Km
CM-155W-XXE6
MM / SM
0.0 dBm
5.0 dBm
-24.0 dBm
24.0 dB
29.0 dB
-3.0 dBm
SC/SC
CWDM
550m / 60 Km
CM-155W-XXE8
MM / SM
dBm
dBm
dBm
dB
dB
dBm
SC/SC
CWDM
550m / 80 Km
** Reference optical specifications for standard multi-mode or single-mode fiber port connectors. Other table specifications for alternate (second) fiber port connector. * NOTE 1: W-XX designates one of eighteen CWDM optical transmission wavelengths (λ) e.g. CM-155W-47 = 1470 ηm or CM-155W-61 = 1610 ηm transmission. Please refer to the CWDM (Coarse Wavelength Division Multiplexing Section for more information. * NOTE 2: CM-155W-XX CWDM converters are available as standalone models and as card modules for the SNMP manageable CCN-2000 / CCN-0400 Chassis units. Please refer to the Fibre Channel (standalone) and CCN-20000 / CCN-0400 Data Sheets for more information. Please refer to the Standalone / Rackable CWDM data pages for information on Passive Optical Multiplexer / De-Multiplexers and OADMs. There are eighteen CWDM wavelengths (λs) specified. Eight standard wavelengths plus four O-band λs are useable over most standard single-mode fiber. Canary offers products for the standard eight wavelengths plus four O-band λs: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 ηm + 1290, 1310, 1330, 1350 More versions of the CM-155W-XX series may be found on the Canary web site as they become available.
ηm
