Fibre Extender System - Avi

Transcript

Fibre Extender System • Allows remote location of Link downconverters via fibre-optic cable • Keeps Link receivers at main OB site for ease of monitoring and operational flexibility • Supplies power to downconverters via BNC cables • Remote (TX) unit self-powering up to 2 Km when using SMPTE HDTV hybrid fibre cable • Remote (TX) unit up to 20 Km when using directly powered Fibre Optic Wireless Camera Extender System for remote Antennae The VISLINK Wireless Camera System based on the L1500 and the Lynx L2174, is the most versatile wireless camera system on the market. The L1292 & L1282 allow the receive antennae and downconverters to be linked by up to a 20 kilometres of SMPTE Hybrid or Single Mode, away from the receiver. As the full band is sent over the fibre, all the cameraS in the band can be received on one fibre link. The L1292 & L1282 Fibre Extender system is a flexible, ‘plug-andplay’ system allowing users to extend antennas/downconverters via standard Fibre. Link has recognised the requirement to integrate and designed the L1292 & L1282 to allow the growing install base of fibre with outside broadcast users and many prewired large sporting venues. The system consists of two units: L1292 Remote Unit - connected to two standard Link down converters. These can be any of the frequency bands currently supported by the Link receive system (1.45GHz to 8.1GHz). The L1282 Base Unit can provide power up Hybrid Fibre to the L1292 which in turn supplies power to the two downconverters. The unit is housed in a robust, weatherproof enclosure designed to meet the demands of the toughest OB environments. L1282 Base Unit – supplies power to the remote unit. Bargraph meters provide easy indication of available cable length and alarm indicators display the status of the remote unit. The RF signals are then fed into the Lynx L2174 or the L2132/4 receivers in the normal way. The unit can be supplied in a robust weatherproof enclosure or indoor rack-mounting chassis as required. • Each system can feed several receivers (via UHF splitters) • Weatherproof housing with pole mount • Other configurations available on request (ie: Rack Mounting, ST/SC Connections) News P U B L VISLINK IC SAF E Y and Entertainment Features Specifications Standard Connectors Fibre Connector Options L1292 Power • 2* BNC to Downconverters • XLR4-M power • Lemo 3K.93C HDTV Hybrid • Fischer 1053 HDTV Hybrid • Stratos HX 1080 HDTV Hybrid • ST L1282 • 2* BNC to UHF output • XLR4-M power Optional DC Power Supply L1292 (Specify at time of order) L1282R L0030 • 9 to 18Vdc • 0.6A L1282 • 9 to 18Vdc • 0.6A or 1.6A when powering L1292 L1282R • 2* BNC to UHF output • IEC C14 mains inlet • 15Vdc @ 3A • XLR4-F DC out • IEC C14 mains inlet Physical L1292 • 160mm [6.3”] x 260mm [10.2”] x 90mm [3.5”] • Weight: 1.5kg (3.3lb) • 100 – 240Vac; 20W L1282 • 160mm [6.3”] x 260mm [10.2”] x 90mm [3.5”] • Weight: 1.5kg (3.3lb) L1282R L1292 FIBRE REMOTE UNIT L1282 FIBRE BASE UNIT TX STATUS POWER A LARM • 1U height, half rack width, • 210mm [8.3”] x 350mm [13.8”] • Weight: 2.5kg (5.5lb) STATUS LOW V POWER REM PWR LOW V FIBRE 1 - LEVEL - LEVEL + ALA RM FIBRE 2 + ALA RM SMPTE HYBRID FIBRE CABLE (optionally including power) LYNX 2174 RECEIVER OR SINGLE-MODE FIBRE CABLE UHF STATUS ESCA PE UHF 8 ENTER M ODE STAT US POWER LOCAL REMOTE MENU UHF OVER FIBRE 9-18Vdc 9-18Vdc if required Figure 1 - Fibre Extender System with L1282, Outdoor Base Unit L1292 FIBRE REMOTE UNIT Multiple Receivers can be linked to the Fibre Extender System, using either the L1282 Outside Unit or L1282R Rack Unit TX STATUS POWER ALA RM LOW V E SCAPE 8 ENTER STA TUS MODE STAT US POWER ESCA PE LOCAL ENTER MENU E SCAPE 8 ENTER STAT US POWER LOCAL REMOTE STATUS MODE STAT US POWER ESCA PE LOCAL ENTER STA T US MODE REMOTE STAT US POWER LOCAL REMOTE 8 MENU L1282R FIBRE BASE UNIT 4x4 Way UHF ACTIVE SPLITTER R EM PWR 8 ALARM RX1 8 RX2 POWER LINK ACTIVE UHF SPLITTER SMPTE HYBRID FIBRE CABLE (optionally including power) OR SINGLE-MODE FIBRE CABLE UHF 8 MENU MENU L1282R FIBRE BASE UNIT STA T US MODE REMOTE 100-240Vac UHF OVER FIBRE 9-18Vdc if required Figure 2 - Fibre Extender System with L1282R, Rack Mount Base Unit www.vislink.com © 2011 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 3 / 16 / 2011 8