Transcript
FS-Adapter
DataAire DAP II Adapter for LONWORKS® FS-A-01-0202 LONWORKS® adapter enabling seamless data transfer between a DataAire DAP II and LONWORKS® networks.
DataAire DAP II - LONWORKS
®
The FieldServer DataAire DAP II Adapter for LONWORKS® is a protocol translator/gateway enabling the DataAire DAP II to communicate with LONWORKS® devices and networks. The FieldServer will connect the DataAire DAP II to a LONWORKS® network through the Metasys N2 protocol. The FieldServer allows status points to be read and the Air Conditioner Controllers to be enabled to the LONWORKS® network. The Adapter is connected to the LONWORKS® Network by being commissioned into the network using a Network Management tool (i.e.: LonMaker or equivalent package). For a full list of points available via the DataAire DAP II Adapter for LONWORKS® please refer to the Adapter Manual or contact FieldServer Technologies. The FieldServer Gateway is capable of providing an interface to the other devices well. In a single, comprehensive package the FieldServer provides the hardware and software necessary for the translation. In addition to the LONWORKS® connector and the serial port, the FS-B2011 includes an Ethernet (10baseT) connector. Configuration files can be downloaded via the serial or Ethernet port. All the necessary software and instructions for configuration are provided with the FieldServer. FieldServer Technologies also offers fee based configuration services. Other FieldServers are available for other fieldbuses for multiple port applications
Specifications Field Connections • LONWORKS® − FTT-10 twisted pair − 1000 Network variable capability − UNVT or SNVT variable support − Explicit (Polled Mode) or Implicit (Bound Mode) Addressing
LED Indicators • Power, Run, System Error, Configuration Error • Ethernet connection – Tx/Rx communication activity • RS-232/RS-485 – Tx/Rx communication activity Other • • • •
Service Pin for LONWORKS® Node identification Configuration utility Diagnostic utility System integration services available
•
Ethernet Port − 10BaeT RJ45 connector
•
Serial Port − RS-232/RS-485 selectable − Up to 115K baud
Power Requirements • 5.0V, 500 mA (Jumper selectable)
•
Drivers − Drivers included are Modbus and LONWORKS®
Environment • Operating temperature: 0-60oC (32-144oF) • Relative humidity: 10-95% RH non-condensing
Host PC Connections (for Configuration) • Ethernet 10BaseT • RS-232/RS-485 selectable
Physical Dimensions • 3.9 x 3.9 x 2 in. (WxDxH) (100 x 100 x 50 mm) • 0.4 lbs (0.8 Kg)
Mounting Options • Desktop, Wall, DIN rail
LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries.
3/04
FieldServer Technologies, 1991 Tarob Court, Milpitas, California 95035 USA Web: www.fieldserver.com Tel: 408-262-2299, FAX: 408-262-9042, Toll-Free: 888-509-1970 Email:
[email protected]
