Transcript
2922 North Division Avenue
· PO Box 366 · York, NE 68467 · 402-362-2000 · 800-445-0730 · Fax 402-362-2001 ·
[email protected] · www.cyclonaire.com
FILTER RECEIVER PNEUMATIC CONVEYING SYSTEMS
APPLICATIONS
·
Air filtration and dust control
MATERIALS / CHARACTERISTICS
·
Any dry Bulk material conveyed pneumatically
CAPACITY
· · BENEFITS AND FEATURES · · · ·
Up to 403 ft2 of filter area (standard) Pressure rated to 2 PSIG, vacuum rated to 15" HG
Pulse jet cleaning to maintain media effectiveness Hinged door for easy bag access Differential pressure gauges for filter service indication Standard:
- Carbon steel (10 gauge welded) - NEMA 4 timer controls - 16 oz. polyester bags - Removable bottom - Smooth wire cages and safety grid
OVERVIEW Cyclonaire brand filter receivers provide excellent filtration.
·
- Support legs and hopper Specify: - Stainless steel
Automatic timers clean the filter media with pulse jet reverse flow air, dropping retained material into the process.
- NEMA 4x 7/9
A wide array of sizes with custom sizing and features also available.
- Top removable design
- Outlet size and style - Cartridge filter elements - Exhaust fan - High temperature design - Custom sizes and features
REQUIREMENTS
· ·
EXPERIENCE
90-100 PSIG, 3-10 SCFM air 110 VAC, 50-60 Hz
INNOVATIVE TECHNOLOGY
SERVICE
QUALITY
FILTER RECEIVER DATA
3 D
FILTER NUMBER AREA OF BAG SQ/FT. BAGS LENGTH 18-FR-8 II 15 8 18 A III 15 8 18 2 C 4 36-FR-8 II 35 8 36 III 35 8 36 56-FR-8 II 58 8 58 III 58 8 58 84-FR-8 II 85 8 84 B III 85 8 84 1 18-FR-14 II 26 14 18 Orientation III 26 14 18 36-FR-14 II 61 14 36 III 61 14 36 Locations Available Std. 58-FR-14 II 101 14 58 Access Door A B C D A III 101 14 58 Outlet 1 2 3 4 2 84-FR-14 II 148 14 84 Weather Hood 1 2 3 4 2 III 148 14 84 18-FR-18 II 34 18 18 Level Sensor A B C D B III 34 18 18 Hand Hole A B C D B 36-FR-18 II 79 18 36 III 79 18 36 84-FR-18 II 130 18 58 Note: III 130 18 58 1. 1,2,3 and 4 are in clean air 84-FR18 II 191 18 84 plenum III 191 18 84 2. A,B,C,and D are in dirt air 58-FR-24 II 173 24 58 III 173 24 84 plenum 84-FR-24 II 254 24 84 3. Dim. E-choose size from III 254 24 84 table based on 3000-4000 ft./ 58-FR-30 II 216 30 58 min gas velocity III 216 30 58 4. 6" material discharge is 84-FR-30 II 318 30 84 III 318 30 84 standard but not mandatory 58-FR-36 II 274 36 58 5. Material inlet size is based III 274 36 58 on customer requirements 84-FR-36 II 403 36 84 III 403 36 84 NOTE: Dimensional data for reference only. Subject to dimensional units are in inches, unless noted. MODEL NO.
ARRG.
* * * * * * * * * * * * * *
DIMENSIONS AIR REQ’D SCFM@ PSIG 4.0@50-60 4.0@50-60 4.2@70-80 4.2@70-80 4.5@90-100 4.5@90-100 5.0@90-100 5.0@90-100 5.2@90-100 5.2@90-100 5.5@90-100 5.5@90-100 5.8@90-100 5.8@90-100 6.2@90-100 6.2@90-100 6.3@90-100 6.3@90-100 6.5@90-100 6.5@90-100 6.7@90-100 6.7@90-100 7.0@90-100 7.0@90-100 7.5@90-100 7.5@90-100 7.5@90-100 7.5@90-100 8.0@90-100 8.0@90-100 8.5@90-100 8.5@90-100 9.0@90-100 9.0@90-100 10.5@90-100 10.5@90-100 change without
E
F
G
3-4 30 17 3-4 30 17 4-5 30 17 4-5 30 17 4-6 30 17 4-6 30 17 4-8 30 17 4-8 30 17 5-8 36 20 5-8 36 20 5-6 36 20 5-6 36 20 5-8 36 20 5-8 36 20 6-10 36 20 6-10 36 20 5-8 42 22 5-8 42 22 6-8 42 22 6-8 42 22 6-8 42 22 6-8 42 22 8-10 42 22 8-10 42 22 8-10 48 24 8-10 48 24 8-12 48 24 8-12 48 24 8-10 54 26 8-10 54 26 8-14 54 26 8-14 54 26 10-12 60 28 10-12 60 28 10-14 60 28 10-14 60 28 notice. All weights
H
S
5 5 6 6 7 7 8 8 6 6 8 8 8 8 9 9 6 6 8 8 8 8 9 9 9 9 11 11 9 9 11 11 10 10 12 12 are in
WT
20 450 20 575 38 560 38 685 63 675 63 800 89 825 89 975 20 525 20 675 38 525 38 675 63 825 63 975 89 1000 89 1200 20 500 20 700 38 600 38 800 63 1000 63 1200 89 1225 89 1450 63 1200 63 1425 89 1450 89 1675 63 1475 63 1750 89 1700 89 1975 63 1725 63 2025 89 2025 89 2325 pounds, all F
F
NEMA 4 Junction Box for solenoid valves (explosion proof optional)
O.D.
O.D.
Opening for roof fan (optional)
H 4" Ø Air Header w/ Pressure Gauge and 1" MNPT Coupling for Header Air Supply. Clean, dry plant air required. (Optional connection other end)
G
Vent (2) 1/8" Ø Connections for Differential Pressure Gauge
S
Access Door w/Gasket (Std.) 18"x28" on 18-DC and 36 DC Units 21"x46" on 58-DC Units 21"x58" on 84-DC, 100-DC and 120 DC Units (2) Access Doors w/Gaskets on units marked with
*
‘S’ without full guard ‘S’ + 9" with full guard
·
·
Safety Grate (optional)
·
2922 N Division Ave PO Box 366 York, NE 68467 402-362-2000
H
E Inlet
As required
12" Minimum
Standard Material Outlet Size 6" (see note above)
· 800-445-0730 · Fax 402-362-2001 ·
[email protected] · www.cyclonaire.com
