Preview only show first 10 pages with watermark. For full document please download

Final Pages_printed_vol4_nb_clear.cdr

   EMBED


Share

Transcript

17 Test Instruments Xl2 Audio and Acoustic Analyzer Acoustilyzer AL1 Minilyzer ML1 Digilyzer DL1 Sound Level Meter Real Time Analyzer Acoustic Analyzer STI-PA Analyzer Audio Analyzer Optional Extended Acoustic Pack Compact Acoustical Analyzer Real Time Analyzer Reverbration Time RT60 Speech Intelligibity STIPA (Optional) Zoom FFT, Delay, THD+N... Class Design 0 Long Battery Life (>16h) Analog Audio Analyzer Level: RMS, Rel, SPL, LEQ THD+N 2nd to 5th Harmonics Frequency and Time Sweep Scope, vu+PPM, Polatity Balanced and Unbalanced Input High Accuracy (+/- 0.1dB) Digital Audio Analyzer Digital Audio Monitoring Channel Status Analysis Interface Carrier Measurements Dual Domain Functions Up to 96 kHz, 24 Bit AES3, S/PDIF, TOSLINK & ADAT MINIRATOR MR-PRO MINIRATOR MR2 DIGIRATOR DR2 TalkBox -Acoustic signal generator Enhanced Analogue Audio Signal Generator Sine Wave, Sweeps, Noise & More Proprietary Wave Forms (*.WAV) Impedance Meter Cable Tester +18 dBu Max. Output Level THD+N <96 dB (0.002%) Analogue Audio Signal Generator Sine Wave, Sweeps, Noise & More Frequency Resolution to 0.01Hz External Power and USB Connectors Back light for LCD & Mute Key +8 dBu Max. Output Level THD+N <90 dB (0.003%) Digital Audio Signal Generator Up to 192 kHz /24 Bit AES3, S/PDIF, TOSLINK & ADAT Supports Dolby Digital, E, PL II, DTS Channel Transparency Check Channel Delay Measurement Better speech intelligibility Testing entire signal chain Voice evacuation systems Setting conference rooms Calibrated acoustic source M2210 - Class 1 Measurement Mic M4260 - Class 2 Measurement Mic MiniSPL - Class 2 Measurement Mic MiniLINK - PC Interface for ML1/DL1 1/2” Omni-directional, free-field microphone Class 1 frequency response according EC 61672-1 Phantom power 48 VDC Electronic data sheet installed Frequency Range 3 Hz - 20 kHz Dynamic range: 18 - 145 dB Build-in Pre-amplifier 1/4” Omni-directional free-field microphone Class 2 according IEC 61672-1 Phantom Power 48 VDC Electronic Data Sheet installed Frequency Range 20 Hz - 20 kHz Dynamic Range: 27 - 136 dB Build-in Pre-amplifier 1/2” Omni-directional free-field microphone Class 2 acc. IEC 61672 Preventing exceeding levels Simplifies PA setups Calibrated microphone USB interface board MiniLINK PC Software Firmware upgrade for ML1/DL1 (only available in conjunction with the MiniLINK) USB Cable Manual TM USA 22 67021711 • 22 26354891 email: [email protected]