Transcript
MADE IN ITALY
FINE 10
Made of quartz diaphragms interspersed with each other
of the nearly omnidirectional sound. The plant provides
and connected by a spruce; it’s inspired by the building
two Fine10s and a subwoofer cod.Sub 10-271, necessary
tradition of fine musical instruments. Each diaphragm is
to complete the area of low frequencies guaranteeing a
machined with precision to get thin membranes so as to
good performance of listening. The various components
allow the vibration of the overall sound spectrum. The
are supported by a sturdy metal structure that serves
units moving coil exciters are fixed in direct contact with
as the base to the ground. In the top and bottom of
the surface material, eliminating any phenomena of self-
panel runs a series of high brightness and low power
oscillation and spurious resonances linked to it; their
LED, adjustable in intensity and operated touch, thanks
positioning on both the diaphragms and the presence
to the Touch me technology, at the touch sensitive area
of a honeycomb structure side allow a uniform diffusion CUSTOMIZATIONS To add exclusivity to the product, as an alternative to
painted in a color of your choice, see RAL color sample
proposed materials, you may be applied for other types
swatch, gloss or matt; the RAL bribe excludesRAL 1026-
of quartz. We look forward to assessing the possible
2005-2007-3024-3026.
realization of your request. The metal support can be
TECHNICAL SPECIFICATIONS Type Floorstanding speaker, wide angle spread, nearly omnidirectional Scheme 4 exciters directly connected to the marble membranes Efficiency 1W/1kHz/1m 82,4 dB (detected) Maximum power 150W (peak, non detected) Crossover Internal, passive
EXCITER UNIT Impedance 8Ω Power (IEC268-5) 20W Frequency response 100 ÷ 15.000 Hz Operating temperature - 20 ÷ 55°C Resonance frequency 100 Hz
EXCITER UNIT Impedance 4Ω Power (IEC268-5) 30W Frequency response 100 ÷ 20.000 Hz Operating temperature - 20 ÷ 60°C Resonance frequency 100 Hz
EXCITER UNIT Impedance 8Ω Power (IEC268-5) 5W rms (10W max) Frequency response 200 ÷ 20.000 Hz Operating temperature - 20 ÷ 55°C Resonance frequency 230 Hz
TECHNICAL SPECIFICATIONS Lighting system Type Indoor light source System Continuous LED strip Specific power 14 W/m Power switch Touch-sensitive button on the front panel Regulator Light intensity adjustment by switch/dimmer Power supply 220v CA 12v DC (power supply provided) Consumption 15W
Weight (Kg) 51
Size (cm) H
W
D
185
70
41
Marmo Equipe srl • Via A. Volta 3 • Z.I. 33082 Azzano Decimo (PN) t. +39 0434 633327 •
[email protected] • www.marmoequipe.it
GRAPHIC ELABORATIONS Speaker impedance 20
Impedance (Ω)
16 12 8 4
18 k
14 k
10 k
6k
2k
80 0
40 0
10 0
0 Frequency (Hz)
Frequency response with constant voltage (1W/1m)
100 90 80 70 60 50 40 k 18
k 14
k 10
6k
2k
0 80
40
10
0
30 0
Frequency response (dB lin)
110
Frequency (Hz)
Frequency response with constant voltage (1W/1m)
30° sx 60° sx
90°sx
centr 100 80
30°dx
60 40 20 0
60°dx
90°dx
Frequency (Hz) 500 1k 2k 4k 8k
Radial diffusion (dB/1m)
Marmo Equipe srl • Via A. Volta 3 • Z.I. 33082 Azzano Decimo (PN) t. +39 0434 633327 •
[email protected] • www.marmoequipe.it
