Transcript
FINE QUALITY PRODUCTS
MANUFACTURER OF HIGH PRESSURE THERMOPLASTIC HOSE, SPRAY TIPS AND ACCESSORIES
254 Raritan Center Parkway • Edison, New Jersey 08837-3610 Tel : 800-932-0124 • Fax : 732-512-9145 www.exitflexUSA.com
254 Raritan Center Parkway • Edison, New Jersey 08837-3610 Tel : 800-932-0124 • 732-512-9141 • Fax : 732-512-9145 e-mail : mail @ ExitflexUSA.com www.exitflexUSA.com
MANUFACTURERS OF QUALITY HIGH PRESSURE HOSE, TUNGSTEN CARBIDE SPRAY TIPS AND ACCESSORIES FOR SPRAY PAINTING EQUIPMENT
EXITFLEX USA, offers a wide range of carefully manufactured, high quality reinforced hoses for applications including high pressure airless paint spray, water jetting and hydraulics, as well as low pressure fluid and air. Only the highest quality materials are used, including cores of polyamide nylon or polyester, single or double reinforcements of woven high tensile brass plated carbon steel, aramid fiber or specially formulated nylon and outer covers of polyurethane. All materials used have excellent resistance to paints and a variety of chemicals, solvents and oils. The use of elastomeric materials gives extra protection against abrasion, tears and are unaffected by sunlight, ultraviolet light, normal radiation and are easy to clean. Textile braided hoses have excellent lay flat characteristics and extremely high shock absorbing and volumetric expansion capabilities. Wire braiding gives the hose its great strength and ensures 100% electrical continuity throughout the hose. Your choice of textile or wire braiding assures compatibility with all airless sprayers. Higher burst pressures allow you to work safely at recommended working pressures. EXITFLEX USA also offers a wide assortment of the highest quality tungsten carbide spray tips and accessories.
INDEX PAGE
AIRLESS
HOSE
COUPLINGS ACCESSORIES
TIPS
1/8” 3/16” 1/4” 3/8” 1/2” HEAVY DUTY 3/4” TEFLON CORE AIR ASSISTED AIRLESS TWIN HOSE HYDRAULIC DRAIN CLEANING WIRE BRAID LOW PRESSURE GENERAL TWIN REUSABLE FITTINGS NIPPLES, SWIVEL UNIONS, AND PLUGS SWIVELS HIGH PRESSURE SWIVELS STAINLESS STEEL SWIVELS H.P. SWIVELS WITH FILTER Y-BLOCKS HIGH PRESSURE LOW PRESSURE SWIVELS MICRO & Z-SWIVEL FILTERS / FILTER HOUSINGS FILTER HOUSINGS REVERSIBLE TIPS SPEEDY TWIN TIPS SPEEDY MKV SPEEDY MKIV FLAT TIPS INDUSTRIAL FINE FINISH AIR ASSISTED TIP ACCESSORIES PRE-ORIFICE CLEANING NEEDLES MICRO FILTERS TIP CHART
TERMS PRICES
:
MINIMUM ORDER FREIGHT RETURNS
: : :
SERVICE CHARGE : WARRANTY : NOTE
:
4 5 6 7 8 9 10 10 11 11 11 12 12 12 13 14 14 14 14 14 15 16, 17 18 18, 19 19 18 19 19 18 18 19 20
TERMS AND CONDITIONS : Net 30 days.
All prices are subject to change without notice. Orders will be shipped and invoiced at prices in effect on the date the order is received. $100.00 net. F.O.B. Edison, New Jersey. Freight allowed on orders in excess of $3,000. No merchandise accepted for return without prior authorization. Restocking charges may apply. This policy also applies to warranty replacements. A 1 ½% service charge will be added to all invoices not paid within terms above and will be applied until invoice is paid. EXITFLEX hoses, tips and accessories are warranted to be free from defects in material and workmanship for a period of one year from date of purchase. This warranty does not extend to damage caused by normal wear relating to abrasion, abuse, negligence, faulty installation, or selecting the improper item for the desired application. Additional handling charges may apply on hose lengths over 100 feet.
HOSE CONSTRUCTION AND SPECIFICATIONS WIRE OR MATERIAL REINFORCEMENT
INNER CORE
OUTER COVER
INNER LAYER PLUS WIRE OR MATERIAL REINFORCEMENT (2 PLY SERIES ONLY) HOSE SERIES
HOSE I/D INCHES
HOSE O/D MM
MAX WP PSI
MIN BURST PSI
MIN BEND
MM
TEMP. RANGE Fº
HOSE CONSTRUCTION
PA12
1/8”
6.9
5,075
20,300
25
-40 to 200
PA13
3/16”
9.3
5,075
20,300
35
-40 to 200
PA14
1/4”
11.7
4,500
18,000
45
-40 to 200
PA16
3/8”
15.2
3,500
14,000
60
-40 to 200
PA18
1/2”
18.5
3,000
12,000
70
-40 to 200
PA26
3/8”
17.5
5,800
23,200
70
-40 to 200
PA28
1/2”
21.5
5,000
20,000
85
-40 to 200
PA212
3/4”
30.0
4,000
16,000
110
-40 to 200
POLYAMIDE NYLON CORE DOUBLE H.T. CARBON STEEL BRAIDS POLYURETHANE COVER
PAT24
1/4”
12.9
6,100
24,400
40
-40 to 200
DOUBLE BRAIDED 1 STEEL, 1 NYLON
KX12
1/8”
6.9
3,200
12,800
25
-40 to 200
SINGLE TEXTILE NYLON BRAID
KX23
3/16”
10.2
3,400
13,600
40
-40 to 200
KX24
1/4”
12.3
3,625
14,500
55
-40 to 200
KX25
5/16”
14.9
3,625
14,500
57
-40 to 200
KX26
3/8”
16.8
3,300
13,200
80
-40 to 200
TC12
1/8”
6.9
5,000
20,000
25
-40 to 250
TC13
3/16”
9.3
5,000
20,000
35
-40 to 250
TC14
1/4”
11.7
4,700
18,850
45
-40 to 250
TC16
3/8”
15.2
3,600
14,400
60
-40 to 250
TC18
1/2”
18.5
3,000
12,000
70
-40 to 250
DP13
3/16”
9.2
4,000
16,000
35
-40 to 175
MO14
1/4”
10.2
110
440
15
-40 to 200
MO16
3/8”
14.0
70
280
25
-40 to 200
MAW14
1/4”
10.2
110
440
15
-40 to 200
LPV14
1/4”
12.3
290
1,160
15
-40 to 200
LPV16
3/8”
15.3
220
880
25
-40 to 200
HD24
1/4”
13.6
9,750
39,000
50
-40 to 200
HD26
3/8”
18.7
8,100
32,400
70
-40 to 200
HD28
1/2”
22.0
7,250
29,000
85
-40 to 200
HD212
3/4”
30.0
6,500
26,000
110
-40 to 200
WE24
1/4”
13.3
8,000
32,000
26
-40 to 200
POLYAMIDE NYLON CORE SINGLE H.T. CARBON STEEL BRAID POLYURETHANE COVER
POLYAMIDE NYLON CORE DOUBLE TEXTILE NYLON BRAIDS POLYURETHANE COVER
FEP 140 TEFLON® CORE SINGLE H.T. CARBON STEEL BRAID POLYURETHANE COVER
UNPLASTICISED ELASTOMER CORE CO-EXTRUDED POLYAMIDE CORE POLYURETHANE COVER
POLYAMIDE CORE TEXTILE BRAID POLYURETHANE COVER
POLYAMIDE NYLON CORE DOUBLE BRAIDED 1 STEEL, 1 ARAMID POLYURETHANE COVER BRAIDED ARAMID/STAINLESS STEEL
QUALITY HIGH PRESSURE AIRLESS HOSE 1/8” Airless Fluid Hose - Series PA12 and KX12
PA12 – 1/8” Core: Polyamide Braid: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 5,000 PSI Minimum Burst Pressure: 20,000 PSI
Color
Length
Part No.
Fittings
Yellow
3’
PA 12- 3 FM
1/4” FM
Yellow
5’
PA 12- 5 FM
1/4” FM
Yellow
15’
PA 12-15 FBE
1/4” FBE
Yellow
25’
PA 12-25 FBE
1/4” FBE
Yellow
50’
PA 12-50 FBE
1/4” FBE
Custom hose lengths available. Your choice of NPSM, NPT or JIC fittings, in regular or stainless steel.
KX12 – 1/8” Core: Polyamide Braid: Polyester Textile Fiber Cover: Polyurethane Maximum Working Pressure: 3,200 PSI Minimum Burst Pressure: 12,800 PSI Stainless steel spring guards at both ends.
Color
Length
Part No.
Fittings
Blue
3’
KX 12- 3 FM
1/4” FM
Blue
5’
KX 12- 5 FM
1/4” FM
Blue
15’
KX 12-15 FBE
1/4” FBE
Blue
25’
KX 12-25 FBE
1/4” FBE
Blue
50’
KX 12-50 FBE
1/4” FBE
Standard Fittings – Series PA12, KX12, PA13, KX23, KX24, PA14 and PAT24 FM FBE MBE
4
= = =
Mild steel female swivel NPSM one end, male rigid NPT on the other end. Mild steel female swivel NPSM on both ends. Mild steel male rigid NPT on both ends.
QUALITY HIGH PRESSURE AIRLESS HOSE 3/16” Airless Fluid Hose – Series PA13 and KX23
PA13 – 3/16” Core: Polyamide Braid: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 5,075 PSI Minimum Burst Pressure: 20,300 PSI
Color
Length
Part No.
Fittings
Yellow
3’
PA 13- 3 FM
1/4” FM
Yellow
5’
PA 13- 5 FM
1/4” FM
Yellow
15’
PA 13-15 FBE
1/4” FBE
Yellow
25’
PA 13-25 FBE
1/4” FBE
Yellow
50’
PA 13-50 FBE
1/4” FBE
Custom hose lengths available. Your choice of NPSM, NPT or JIC fittings, in regular or stainless steel.
KX23 – 3/16” Core: Polyamide Braid: Polyester Textile Fiber Cover: Polyurethane Maximum Working Pressure: 3,500 PSI Minimum Burst Pressure: 14,000 PSI Stainless steel spring guards at both ends.
Color
Length
Part No.
Fittings
Blue
3’
KX 23- 3 FM
1/4” FM
Blue
5’
KX 23- 5 FM
1/4” FM
Blue
15’
KX 23-15 FBE
1/4” FBE
Blue
25’
KX 23-25 FBE
1/4” FBE
Blue
50’
KX 23-50 FBE
1/4” FBE
Special Fittings – Series PA12, KX12, PA13, KX23, KX24, PA14 and PAT24 FFSS JIC JIS
= = =
Stainless steel grade 303 female swivel NPSM on both ends, wetted parts only. Mild steel female swivel #5 JIC 1/2 x 20 on both ends. Stainless steel grade 303 female swivel #5 JIC 1/2 x 20 on both ends, wetted parts only.
5
QUALITY HIGH PRESSURE AIRLESS HOSE 1/4” Airless Fluid Hose – Series KX24, PA14 and PAT24
KX24 – 1/4” Core: Polyamide Braid: Polyester Textile Fiber Cover: Polyurethane Maximum Working Pressure: 3,625 PSI Minimum Burst Pressure: 14,500 PSI Stainless steel spring guards at both ends.
Color
Length
Part No.
Fittings
Blue
25’
KX 24-25 FBE
1/4” FBE
Blue
50’
KX 24-50 FBE
1/4” FBE
Color
Length
Part No.
Fittings
Red
6’
PA 14- 6 FBE
1/4” FBE
Red
25’
PA 14-25 FBE
1/4” FBE
Red
50’
PA 14-50 FBE
1/4” FBE
Color
Length
Part No.
Fittings
PA14 – 1/4” Core: Polyamide Braid: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 4,500 PSI Minimum Burst Pressure: 18,000 PSI
PAT24 – 1/4” Core: Polyamide Braid: One Steel, One Polyester Cover: Polyurethane Maximum Working Pressure: 6,100 PSI Minimum Burst Pressure: 24,400 PSI
Green
6’
PAT 24- 6 FBE
1/4” FBE
Green
25’
PAT 24-25 FBE
1/4” FBE
Green
50’
PAT 24-50 FBE
1/4” FBE
Custom hose lengths available with choice of fittings, in regular or stainless steel. Special fitting available – Series KX24, PA14 and PAT24 Permanently couple any of the above 1/4” I.D. hoses series with a 3/8” female swivel NPSM on one or both ends. 6
QUALITY HIGH PRESSURE AIRLESS HOSE 3/8” Airless Fluid Hose – Series KX26, PA16 and PA26
KX26 – 3/8” Core: Polyamide Braid: Polyester Textile Fiber Cover: Polyurethane Maximum Working Pressure: 3,300 PSI Minimum Burst Pressure: 13,200 PSI Stainless steel spring guards at both ends.
Color
Length
Blue
25’
KX 26-25 F or M
Part No.
Fittings 3/8” F or M
Blue
50’
KX 26-50 F or M
3/8” F or M
Color
Length
Red
25’
PA 16-25 F or M
3/8” F or M
Red
50’
PA 16-50 F or M
3/8” F or M
Color
Length
Dark Blue
25’
PA 26-25 F or M
3/8” F or M
Dark Blue
50’
PA 26-50 F or M
3/8” F or M
PA16 – 3/8” Core: Polyamide Braid: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 3,500 PSI Minimum Burst Pressure: 14,000 PSI
Part No.
Fittings
PA26 – 3/8” Core: Polyamide Braids: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 5,800 PSI Minimum Burst Pressure: 23,200 PSI
Part No.
Fittings
Custom hose lengths available with choice of fittings, in regular or stainless steel. Special fitting available – Series KX26, PA16 and PA26 Permanently couple any of these 3/8” I.D. hose series with a 1/4” female swivel NPSM on one or both ends. 7
QUALITY HIGH PRESSURE AIRLESS HOSE 1/2” Airless Fluid Hose – Series PA18 and PA28
PA18 – 1/2” Core: Polyamide Braid: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 3,000 PSI Minimum Burst Pressure: 12,000 PSI
Color
Length
Part No.
Fittings
Red
25’
PA 18-25 F or M
1/2” F or M
Red
50’
PA 18-50 F or M
1/2” F or M
Color
Length
Dark Blue
25’
PA 28-25 F or M
1/2” F or M
Dark Blue
50’
PA 28-50 F or M
1/2” F or M
PA28 – 1/2” Core: Polyamide Braids: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 5,000 PSI Minimum Burst Pressure: 20,000 PSI
Part No.
Fittings
Custom hose lengths available with choice of fittings, in regular or stainless steel.
Available Fittings – Series KX26, PA16, PA26, PA18 and PA28 F or M = FFSS = JIC =
8
Any combination of mild steel female swivel NPSM and male rigid NPT. Stainless steel grade 303 female swivel NPSM on both ends, wetted parts only Mild steel female swivel JIC 1/2 x 20, 9/16 x 18 or 3/4 x 16 on both ends.
QUALITY HIGH PRESSURE AIRLESS HOSE Super Light and Flexible Heavy Duty Hose Series WE24, HD24, HD26 & HD28
WE24 – 1/4” Core: Polyamide Braid: One Aramid, One Stainless Steel Cover: Polyurethane Maximum Working Pressure: 8,000 PSI Minimum Burst Pressure: 32,000 PSI
Color
Length
Part No.
Fittings
Translucent Blue
6’
WE 24- 6 FBE
1/4” FBE
HD24 – 1/4” Core: Polyamide Braid: One Aramid, One Carbon Steel Cover: Polyurethane Maximum Working Pressure: 9,750 PSI Minimum Burst Pressure: 39,000 PSI
Color
Length
Part No.
Fittings
Black
50’
HD 24-50 FBE
1/4” FBE
Color
Length
Part No.
Fittings
Black
50’
HD 26-50 FBE
3/8” FBE
Color
Length
Part No.
Fittings
Black
50’
HD 28-50 FBE
1/2” FBE
HD26 – 3/8” Core: Polyamide Braid: One Aramid, One Carbon Steel Cover: Polyurethane Maximum Working Pressure: 8,100 PSI Minimum Burst Pressure: 32,400 PSI
HD28 – 1/2” Core: Polyamide Braid: One Aramid, One Carbon Steel Cover: Polyurethane Maximum Working Pressure: 7,250 PSI Minimum Burst Pressure: 29,000 PSI
Custom hose lengths available with choice of fittings, in regular or stainless steel. 9
QUALITY HIGH PRESSURE SPECIALTY HOSE 3/4” Airless Fluid Hose – Series PA212 & HD212
PA212 – 3/4” Core: Polyamide Braid: High Tensile Carbon Steel Cover: Polyurethane Maximum Working Pressure: 4,000 PSI Minimum Burst Pressure: 16,000 PSI
Color
Length
Dark Blue
50’
Color
Length
Black
50’
Part No. PA 212-50 For M
Fittings 3/4” F or M
HD212 – 3/4” Core: Polyamide Braid: One Aramid, One Carbon Steel Cover: Polyurethane Maximum Working Pressure: 6,500 PSI Minimum Burst Pressure: 26,000 PSI
Part No. PA 212-50 For M
Fittings 3/4” F or M
Teflon Core Airless Hose – Series TC12, TC13, TC14, TC16 and TC18
TEFLON SERIES
Hose Series
Hose I.D.
Hose Color
Working Pressure
Burst Pressure
Core: Teflon 140 Braid: High Tensile Carbon Steel Cover: Polyurethane Designed for those materials requiring moisture resistance or chemical resistance
TC12
1/8”
Black
5,000 PSI
20,000 PSI
TC13
3/16”
Black
5,000 PSI
20,000 PSI
TC14
1/4”
Black
4,700 PSI
18,850 PSI
TC16
3/8”
Black
3,600 PSI
14,400 PSI
TC18
1/2"
Black
3,000 PSI
12,000 PSI
Custom hose lengths available. Special fitting available – Series TC12, TC13, TC14, TC16 and TC18
Your choice of NPSM, NPT or JIC fittings, in regular or stainless steel.
10
QUALITY HIGH PRESSURE SPECIALTY HOSE Air Assisted Airless Twin Hose – Series KMW23 Twin Hose Assembly welded together for Air Assisted Airless systems comprised of:
KX23 (3/16” FLUID) MO14 (1/4" AIR) Core: Polyamide Braid: Polyester Textile Fiber Cover: Polyurethane Maximum Working Pressure: 3,500 PSI Minimum Burst Pressure: 14,000 PSI
Color
Length
Part No.
Fittings
Blue
25’
KMW 23-25
1/4” FBE
Blue
50’
KMW 23-50
1/4” FBE
Each assembly comes with two 1/4” useable low pressure fittings for air hose. See product 76-341 on page 12.
Jet Drain Cleaning Hose System – “The Depth Charge” The system is designed to effectively clean drain pipes with sizes in excess of 1 ¼” regardless of pipe routing or configuration. The hose comes equipped with either a high-speed rotating nozzle or with a non-rotating static nozzle. Hoses can be ordered in any size length and with a variety of nozzle types and fittings.
DP13 – 3/16” Core: Unplasticised Elastomer Braid: Single H.T. Carbon Steel Cover: Polyurethane Maximum Working Pressure: 4,000, PSI Minimum Burst Pressure: 16,000, PSI
Color
Length
Bronze
75’
Part No. DP 13-75
Fittings 1/4” FBE
11
HIGH SPECIFICATION LOW PRESSURE HOSE AND FITTINGS
Low Pressure Fluid & Air Hose – Single and Twin Part Number
Application
MWP PSI
MO Series
Co-extruded construction of polyamide inner core and durable polyurethane outer cover.
MO 14
Air Hose 1/4” Red
110
500
MO 16
Air Hose 3/8” Black
70
250
MAW Series
Fluid hose welded together for ease of handling and use. Colored coded easy identification, red and black.
MAW 14
Twin Fluid 1/4"
LPV Series
Solvent resistant inner tube of polyamide and a durable, non-marking polyurethane cover.
110
LPV 14
Fluid Hose 1/4” Black
290
500
LPV 16
Fluid Hose 3/8” Black
220
250
Reusable Low Pressure Hose Fittings Easy fit reusable stainless steel fittings.
Part Number
For use with
Size
76-341
1/4” MO, MA
1/4” Female
76-358
1/4” MO, MA
3/8” Female
76-441
1/4” LPV
1/4” Female
76-458 76-688
1/4” LPV 3/8” LPV
3/8” Female 3/8” Female
76-691
3/8” LPV
1/4” Female
76-888
3/8” MO
3/8” Female
76-891
3/8” MO
1/4” Female
SPRING GUARDS Easy-fit and lock-in spring guards.
12
Feet/Reel
Part Number
For use with
34-050
MO14, MAW14
34-060
LPV14
250
HIGH PRESSURE COUPLINGS AND ADAPTORS
Part Number Male x Male
Male x Female
Female x Female
Plugs
Description
74-011
1/4" NPT (M) x 1/4” NPT (M)
74-011SS
1/4" NPT (M) x 1/4” NPT (M) stainless
74-012
1/4" NPT (M) x 3/8” NPT (M)
74-012SS
1/4" NPT (M) x 3/8” NPT (M) stainless
74-013
3/8" NPT (M) x 3/8” NPT (M)
74-013SS
3/8” NPT (M) x 3/8” NPT (M) stainless
74-014
3/8" NPT (M) x 1/2” NPT (M)
74-015
1/2" NPT (M) x 1/2” NPT (M)
74-016
3/4” NPT (M) x 3/4” NPT (M)
74-021
JIC 1/2 x 20 (M) x JIC 1/2 x 20 (M)
74-022
JIC 1/2 x 20 (M) x JIC 3/4 x 16 (M)
74-023
JIC 3/4 x 16 (M) x JIC 3/4 x 16 (M)
74-032
1/4" NPS (M) x 1/4” NPSM (F)
74-033
3/8" NPS (M) x 1/4” NPSM (F)
74-034
3/8" NPS (M) x 3/8” NPSM (F)
74-036
3/8" NPT (M) x 1/4” NPSM (F)
74-037
3/8" NPT (M) x 1/2” NPSM (F)
74-038
1/2" NPT (M) x 1/2” NPSM (F)
74-039
1/4" NPT (M) x 1/4” NPSM (F)
74-040
1/4" NPS (M) x 3/8” NPSM (F)
74-041
1/4” NPT (M) x JIC 1/2 x 20 (F)
74-042
3/8” NPT (M) x JIC 3/4 x 16 (F)
74-047
3/8" NPT (M) x 3/8” NPSM (F)
74-090
1/2” NPT (M) x 3/4” NPSM (F)
74-091
3/4” NPT (M) x 1/2” NPSM (F)
74-161
1/4” NPSM (F) x 1/4” NPSM (F)
74-162
1/4” NPSM (F) x 3/8” NPSM (F)
74-163
3/8” NPSM (F) x 3/8” NPSM (F)
74-311
1/4” NPT (M)
74-313
3/8” NPT (M) 13
SWIVELS AND Y-BLOCKS
Gun & Hose Swivels Turns very easily even under extremely high pressures. MWP 7,500 PSI. Part No.
Description
70-220
1/4” NPS (M) x 1/4” NPSM (F)
70-220/34
1/4” NPS (M) x 1/4” NPSM (F) FULLY STAINLESS STEEL
70-225
1/4” NPS (M) x 1/4” NPT (M)
70-520
3/8” NPS (M) x 1/4” NPSM (F)
70-550
3/8” NPS (M) x 3/8” NPSM (F)
Gun Swivels with Inline Filter Combination high pressure swivel and inline filter. Turns easily even under extremely high pressures. MWP 7,500 PSI. Part No.
Description
71-220
1/4” NPS (M) x 1/4” NPSM (F)
71-250
1/4” NPS (M) x 3/8” NPSM (F)
Filters listed on page 16 are ordered separately.
High Pressure Y-Block Stainless steel fittings. MWP 7,250 PSI. Part No. 74-822
Description 1/4” (M) x 1/4” (F)
Low Pressure Y-Block Stainless steel fittings. MWP 1450 PSI (900 PSI restrictor models). Part No.
14
Description
74-722
1/4” (M) x 1/4” (F) with restrictor
74-752
1/4” (M) x 3/8” (F) with restrictor
74-755
3/8” (M) x 3/8” (F) with restrictor
74-922
1/4” (M) x 1/4” (F)
74-952
1/4” (M) x 3/8” (F)
74-955
3/8” (M) x 3/8” (F)
SWIVELS AND Y-BLOCKS
Gun & Hose Swivels Turns very easily even under extremely high pressures. MWP 7,500 PSI. Part No.
Description
70-220
1/4” NPS (M) x 1/4” NPSM (F)
70-220/34
1/4” NPS (M) x 1/4” NPSM (F) FULLY STAINLESS STEEL
70-225
1/4” NPS (M) x 1/4” NPT (M)
70-520
3/8” NPS (M) x 1/4” NPSM (F)
70-550
3/8” NPS (M) x 3/8” NPSM (F)
Gun Swivels with Inline Filter Combination high pressure swivel and inline filter. Turns easily even under extremely high pressures. MWP 7,500 PSI. Part No.
Description
71-220
1/4” NPS (M) x 1/4” NPSM (F)
71-250
1/4” NPS (M) x 3/8” NPSM (F)
Filters listed on page 16 are ordered separately.
High Pressure Y-Block Stainless steel fittings. MWP 7,250 PSI. Part No. 74-822
Description 1/4” (M) x 1/4” (F)
Low Pressure Y-Block Stainless steel fittings. MWP 1450 PSI (900 PSI restrictor models). Part No.
14
Description
74-722
1/4” (M) x 1/4” (F) with restrictor
74-752
1/4” (M) x 3/8” (F) with restrictor
74-755
3/8” (M) x 3/8” (F) with restrictor
74-922
1/4” (M) x 1/4” (F)
74-952
1/4” (M) x 3/8” (F)
74-955
3/8” (M) x 3/8” (F)
MICRO & Z-SWIVELS
Micro Gun Swivels MWP 8,000 PSI with a 4:1 Safety Factor
Length - 1.25 Inches
Fully Stainless Steel Construction Creates a lightweight, compact and maneuverable connection for the transfer of air and liquid materials at either low or high pressures. With an operating pressure from 1 psi to 8000 psi
Weight - 25 Grams
Part No.
Description
79-001
1/4” NPS (M) x 1/4” NPSM (F)
Suitable for use with solvent and water based paints, mastics and adhesives, lacquers and varnishes, inks, air, water, steam, beverages, fuels and hydraulic oils. Turns very easily even under extremely high pressures.
Z- Swivel MWP 8,000 PSI with a 4:1 Safety Factor Fully Stainless Steel Construction Lightweight, compact and extremely maneuverable connection which allows complete 360° movement on 3 axes. With an operating pressure from 1 psi to 8000 psi
Part No.
Description
79-101
1/4” NPS (M) x 1/4” NPSM (F) Weight - 80 Grams
Turns very easily even under extremely high pressures.
15
FILTERS AND FILTER HOUSINGS
Disc Filters Manufactured of 304 stainless. Part No.
Description
36-020
30 Mesh
36-009
60 Mesh
36-005
100 Mesh
36-003
200 Mesh
Gun Handle Filters Color coded for easy identification. Four mesh sizes available. Part No.
Description
36-030
30 M Green
36-060
60 M White
36-100
100 M Yellow
36-200
200 M Red
Suction Filter Assembly Reinforced polyamide for durability and easy clean up. Uses the Manifold Filter series 36-XXX Part No.
Cap Color
Connection
36-450
Green
1” NPSM (F)
36-452
Orange
3/4” NPSM (F)
36-453
Black
1/2” NPSM (F)
Manifold Filters Manufactured of 304 stainless steel. Compatible to Graco 167-XXX Other mesh sizes available. Part No.
Description
36-403
30 Mesh
36-406
60 Mesh
36-410
100 Mesh
36-420
200 Mesh
High Pressure Manifold Filter Housing Aluminum High Pressure Manifold Filter Housing. Uses the Manifold Filter series 36-XXX. MWP 5800 PSI.
16
Part No.
Description
36-400/12
3/8” NPSM (F) x 1/4” NPT (M)
FILTERS AND FILTER HOUSINGS Inline Filter Housing Assemblies Uses the disc filters. MWP 7500 PSI. Part No.
Description
72-220
1/4” NPS (M) x 1/4” NPSM (F)
72-250
1/4” NPS (M) x 3/8” NPSM (F)
72-520
3/8” NPS (M) x 1/4” NPSM (F)
72-550
3/8” NPS (M) x 38” NPSM (F)
Filters listed on page 16 are ordered separately.
Tip Sieves Compatible to Kremlin 129-609-XXX. Part No.
Description
36-1050
50 Mesh Tip Filter
36-1051
100 Mesh Tip Filter
36-1052
200 Mesh Tip Filter
High Pressure Screen-Filters Four mesh sizes available. Compatible to Kremlin 000-161-XXX. Part No.
Description
36-712
55 Mesh
36-709
60 Mesh
36-706
85 Mesh
36-704
140 Mesh
Nylon Suction Filter 150 Mesh Nylon Size 0 29mm. Part No.
Description
36-029/07
150 Mesh
Gravity Filter 150 Mesh Nylon Gravity Filter Size 0 11.5mm. Part No.
Description
36-029/11
150 Mesh 17
TIPS AND TIP ACCESSORIES
Speedy Reversible Tip - MKV Self-cleaning airless spray tip. MWP 7,500 PSI. Part No.
Description
88-500
Line marking tip cylinder
88-501
Standard tip cylinder
88-502
Fine finish tip cylinder
88-505
Seal
Reversible Twin Tip Twin tips produce two different spray patterns with a simple twist of the cylinder. The twin tip concept is available on any reversible product. Part No. 88-503
Description Fine finish tip cylinder
Industrial Airless Flat Tip Industrial grade tips are cut. Tested and mounted in a highly polished stainless steel jacket. Part No.
Description
63-505
Standard flat tip
63-507
Line marking flat tip
Universal Pre-Orifice For excellent paint application at greatly reduced operating pressures. Part No.
Description
63-003
Pre-Orifice .012” white
63-004
Pre-Orifice .016” yellow
63-005
Pre-Orifice .019” red
63-007
Pre-Orifice .026” blue
63-010
Pre-Orifice .039” black
Spray Tip Cleaning Needles The unique tapered triangular design enables it to clean any size tip helping to keep it operating at peak performance. Part No.
18
Description
36-701
Carton (12 x 12) for tips -.011
36-703
Carton (12 x 12) for tips +.011
TIPS AND TIP ACCESSORIES
Speedy MKV Tip Base Assembly Hand tighten to all popular spray guns. MVP 7,500 PSI. Part No.
Description
88-552
Base unit + seal fits 7/8 x14
88-553
Base unit + seal fits 3/8 NPS
88-554
Base unit + seal fits 3/4x 20
88-557
Base unit + seal fits 11/16 x 16
Speedy Reversible Tip – MKIV Barrel type cylinder is interchangeable into other manufacturer’s models. The tip cylinder must be fitted with the matching seal. Part No. 88-401 88-463
Description Standard tip cylinder Seal for MKIV tip cylinder
Superfine Finishing Airless Tip Incorporates a primary orifice with a removable pre-orifice in a stainless steel jacket. Allows for atomization of coatings at lower pressures. Part No. 63-509
Description Superfine finishing flat tip
Air Assisted Airless Tip AAA tips are manufactured in a wide variety of designs to fit most popular gun models. Part No.
Description
63-550
AK (Kremlin/Asturo) pin type
63-552
AK (Kremlin) groove type
63-560
AG (Graco) pin type
63-570
AS (Sagola) pin type
Micro Tip Filter The micro tip filter fits behind most AAA tip designs, serving as both filter and pre-orifice. 100 mesh filter. Part No. 36-610
Description Pack of ten filters 19
TIP CHART Each EXITFLEX tip is carefully manufactured and individually tested for assured quality, performance, and life, under demanding conditions.
20
254 Raritan Center Parkway • Edison, N.J. 08837-3610 Tel : 800-932-0124 • Fax : 732-512-9145
