Transcript
No. 680/ 11.03.2016, Edition No. 8, 1/7 PRELIMINARY
Water-proof, dust-proof, impact resistant luminaire
FIPAD-06-1Rx2/4/5B-18LED FIPAD-06-1Rx2B-18 LED PCOP, FIPAD-06-1Rx4B-18 LED PCOP, FIPAD-06-1Rx5B-18 LED PCOP FIPAD-06-1Rx4B-18 LED PCOP+KIT EM1H, FIPAD-06-1Rx5B-18 LED PCOP+KIT EM1H
About the product The new luminaire FIPAD-06 LED, with watertight polycarbonate diffuser is ideal for use in harsh environments where required protection against vapour, water, and dust is. The opal diffuser ensures the visual comfort and quality light. Being equipped with medium power LED modules, FIPAD-06 LED offers both reduced power consumption and low maintenance costs giving the possibility of replacement of fluorescent solutions without compromising the colour of the light.
EN 60598 RoHS IP65
IK08 body IK09 PC diffuser
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
-25°C ÷ +35°C* +5°C÷ +35°C with EM1H
18.3W 21.9W 39W 43.9W 48.8W 54.9W 73W LED
TECHNICAL SHEET
No. 680/ 11.03.2016, Edition No. 8, 2/7 PRELIMINARY
The compact and economical design provides perfect integration with the environment. The IP65 protection means for FIPAD-06 LED sealing gasket and polycarbonate or stainless steel clips and enable it to be used in damp places such as industry, warehouses, and sport areas.
Application General indoor for humid environments with incombustible dust: industrial halls, warehouses, sport areas, workshops. Covered outdoor areas ( only under roofs, covers, cupolas that protect the luminaires against solar rays): railway stations, bus stations, waiting halls, garages, underground parkings, subway tunnels, covered storage areas, tunnels, subways, corridors, staircases. Emergency lighting for evacuation with 1B-18LED for the variants FIPAD-06-1Rx4/5B-18LED PCOP (1200mm, 1500mm) + KIT EM1H.
Light source Power LEDs, colour temperature or neutral-white 4000K, lifetime L70B50 approximately 50.000 hours at Ta=25ºC, CRI: ≥80. On request the product could be equipped with LEDs with colour temperature cool-white day-light 6500K, CRI: 70 or warm-white 3000K, CRI: 90. The LED system included in the product could replace or is equivalent with fluorescent lamp T8 Ø26mm, T5 Ø16mm.
Advantages Economical, compact luminaire designed for use in harsh environments where robustness and performance are key features. Operates exclusively with LED, making it the best option for damp areas. Energy savings. It has easy installation and maintenance. Complies in full with the standards for IP65/IP66 protection – provides protection against dust and moisture and has high impact resistance IK08. Reduced maintenance costs. There are not necessary interventions for lamp replacements during exploitation.
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
TECHNICAL SHEET
No. 680/ 11.03.2016, Edition No. 8, 3/7 PRELIMINARY
Mounting : visible with brackets
Mounting: suspended with brackets (included in the
(included in the product)
product) and stainless steel hooks that must be demanded separately
Product type
L [mm]
m [mm]
l [mm]
h [mm]
FIPAD-06-1Rx2B-18 LED
662
350
145
111
FIPAD-06-1Rx4B-18 LED
1272
700
145
111
FIPAD-06-1Rx5B-18 LED
1572
940
145
111
FIPAD-06-1Rx5B-18 LED OPAL
Photometric data FIPAD-06-1Rx5B-18 LED OPAL CIE: 46 75 92 94 90 UTE: 0.85E+0.05T UGR <23 (8H 4H 0.7/0.5/0.2 UGRtransv22.6 UGRlong22.1 Light distribution diagram [Cd/1000lm]
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
TECHNICAL SHEET
No. 680/ 11.03.2016, Edition No. 8, 4/7 PRELIMINARY
Description
Light grey polycarbonate body, UV stable, resistant to impact, dust and moisture.
Translucent polycarbonate diffuser for an optimal light distribution.
White painted steel sheet gear rail.
Polyamide with glass fibre clips that remains attached to the body when the luminaire is open.
Polyurethane foam sealing gasket.
The luminaire has PG 13.5 nipples on both ends.
Supply wire diameter: Φ8 ÷ Φ12 mm.
Distance part made of polyamide with glass fibre.
3 poles serial terminal.
Gear (electronic driver) included in the product and manufactured according to the specific standards.
Colour grey.
Variants on request On request the luminaire could be equipped with: o
Fast connection kit 2 connectors (male-female)
o
stainless steel clips
o
dimming: analog, PWM, DALI, DALI DT6, DSI function of the driver type
o
PC body and gear for operating at low temperatures till -25˚C
o
screws for locking the cover against unauthorized opening for both plastic stainless steel clips
On request the luminaire could be equipped with emergency lighting kit for 1 hour (1H). (EM=emergency) for the variants FIPAD-06-1Rx4/5B-18LED PCOP (1200mm, 1500mm) + KIT EM1H.
The variant with emergency lighting (EM - emergency) will be available after the finalization of the laboratory tests.
The variant with emergency lighting (EM - emergency): o
The inverter ensures both the accumulators charging and the switch to the emergency functioning mode of the luminaire
o
Accumulators: Ni-Cd 3x1.2V/1.6 Ah (2B-14LED) that ensure autonomy in emergency mode of 1 hour.
o
The charging time of the accumulators: 20h
o
On the emergency mode the LEDs are powered from accumulators and ensure a reduced lighting that is needed for room evacuation. Approximate brut flux in emergency mode: 415÷567lm.
Note: The options could be combined function of the client request.
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
TECHNICAL SHEET
No. 680/ 11.03.2016, Edition No. 8, 5/7 PRELIMINARY
Mounting
Visible on ceiling or wall with screws and stainless brackets included in the product.
Suspended with stainless steel hooks that must be demanded separately.
When the luminaires are exposed to regular contacts with chemicals suspended in atmosphere please contact the manufacturer for advice.
Compliance with the European Directives
Rated voltage: 230V/50Hz.
Environment temperature range: o
-25˚C…+ 35˚C except the variant FIPAD-06-1Rx4B-18LED,
o
-20˚C…+ 35˚C for the variant FIPAD-06-1Rx4B-18LED (var. 5919/5209lm)
o
+5˚C…+ 35˚C for the variants with emergency lighting kit (EM)
Relative humidity: 80% at the temperature of + 20˚C.
Mechanical impact resistance: IK08 (IK08 body, IK09 PC diffuser).
Jolt resistance according to SR EN 60068-2-29: 1000 ±10 jolts, acceleration of 10g, and duration of impulse: 16ms.
The luminaire is manufactured according to the requirements of the standards SR EN 60598-1, SR EN 60598-2-1, and SR EN 62031.
Compliance with the European Directives
Low Voltage Directive.
Electromagnetic Compatibility Directive.
RoHS Directive, WEEE Directive.
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
TECHNICAL SHEET
No. 680/ 11.03.2016, Edition No. 8, 6/7 PRELIMINARY
The product could be realised in more variants functions of the length, respectively power and LED performances.
Product type
Lg. [mm]
Rated Active Product voltage power code [V] [W]
Power Protection factor degree
Class of protection against electric shock
IK
Total initial Total brut Weight luminous LEDs [Kg] efficiency flux /net [lm/W] luminaire [lm]
FIPAD-06-1Rx2B-18 LED OPAL 4000K
662
23417490
230
18.3
≥0.95
IP65
I
IK08
1.4
662
23417497
230
21.9
≥0.95
IP65
I
IK08
1.4
1272
23417491
230
39.0
≥0.96
IP65
I
IK08
2.8
1272
23417554
230
39.0
≥0.96
IP65
I
IK08
3.1
1272
23417498
230
43.9
≥0.96
IP65
I
IK08
2.8
1272
23417559
230
43.9
≥0.96
IP65
I
IK08
3.1
1272
23417496
230
48.8
≥0.96
IP65
I
IK08
2.8
1272
23417558
230
48.8
≥0.96
IP65
I
IK08
2.8
1572
23417494
230
54.9
≥0.99
IP65
I
IK08
3.7
1572
23417560
230
54.9
≥0.99
IP65
I
IK08
4.0
1572
23417495
230
73.0
≥0.99
IP65
I
IK08
3.7
1572
23417557
230
73.0
≥0.99
IP65
I
IK08
4.0
Standard FIPAD-06-1Rx2B-18 LED OPAL 4000K High Performance FIPAD-06-1Rx4B-18 LED OPAL 4000K Standard FIPAD-06-1Rx4B-18 LED OPAL 4000K Standard + EM 1H FIPAD-06-1Rx4B-18 LED OPAL 4000K High Performance
2307/ 2030 2700/ 2376 4962/ 4367 4962/ 4367 5919/ 5209
126
123
127
127
135
FIPAD-06-1Rx4B-18 LED OPAL 4000K High Performance
5919/ 5209
135
+ EM 1H FIPAD-06-1Rx4B-18 LED OPAL 4000K FIPAD-06-1Rx4B-18 LED OPAL 4000K +EM 1H FIPAD-06-1Rx5B-18 LED OPAL 4000K Standard FIPAD-06-1Rx5B-18 LED OPAL 4000K Standard + EM 1H FIPAD-06-1Rx5B-18 LED OPAL 4000K High Performance
6093/ 5362 6093/ 5362 7399/ 6511 7399/ 6511 8705/ 7660
125
125
135
135
119
FIPAD-06-1Rx5B-18 LED OPAL 4000K High Performance
8705/ 7660
119
+ EM 1H PCOP = translucent polycarbonate diffuser, EM 1H = with emergency lighting kit (for evacuation) for 1 hour
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
TECHNICAL SHEET
No. 680/ 11.03.2016, Edition No. 8, 7/7 PRELIMINARY
Options FAST CONNECTION KIT (PI) 1 connector
CABLE+CONNECTOR(1M-CT)
INOX (STAINLESS) CLIPS
Included in the product for the LED variant
1 m cable MYYM 3x1.5mm² + 1 tubular connector.
To be ordered
To be ordered separately
To be ordered separately
Fast connection kit* (set of 1 piece /
INOX clips
luminaire)
(set of 6 pcs for 600mm)
*Note. For this variant the connection cables must be solid mono-wire with the section up
*Note. The cables for connection must be:
to 2.5mm².
- 3 poles connector: cable section 5÷13mm²
(set of 10 pcs for 1200mm) (set of 12 pcs for 1500mm)
- 5 poles connector: cable section 8÷17mm² VISIBLE MOUNTING
SUSPENDED MOUNTING
EMERGENCY LIGHTING KIT EM1H
with brackets (included in the product)
with brackets (included in the product) and
To be ordered
stainless steel hooks that must be ordered
Included only in the variants “+
EM 1H“
separately (set of 2 pcs. / product).
Brackets for visible mounting (set of 2 pcs. / product).
SCREWS FOR LOCKING AGAINST UNAUTHORIZED OPENING
Both plastic and stainless steel clips can be additionally fixed to the luminaire by screws
Note. The options could be combined function of the customer request
ELBA S.A improves continuously its products. We reserve the right to change the specifications in the interest of improving our products without prior notifications or public announcement. © ELBA S.A.
135 Paul Morand Street, Freidorf Industrial Park Timisoara 300538, Romania
www.elba.ro
TECHNICAL SHEET
