Transcript
First Alert Pro Controls Basic Keypad Operation FEATURE READY SCREEN
ALPHA SCREEN DISPLAY
Easily tells the end-user that the system is ready to arm.
FIXED-WORD SCREEN DISPLAY
(-7%61)( 6)%(=83%61
AC
READY
NOT READY SCREEN Press the ✴ key [READY] key
to display violated zones. Shows the end-user how to identify open zones. GENERAL KEYPAD OPERATION 4-digit user code followed by a command: 1
2
3
4
(-7%61)(³46)77✴ 837,3;*%9087
AC
NOT READY
(-7%61)( 6)%(=83%61
AC
+ AWAY
4-digit user code
READY
[2] key
Arms the system. 1
2
3
4
+ OFF
4-digit user code
[1] key
Disarms the system. ARMING/DISARMING 1
2
3
4
4-digit user code
+ AWAY [2] key
%61)(%;%= =391%=)<-823;
AWAY
AC
Arms perimeter, interior, and sets entry/exit time. 1
2
3
4
4-digit user code
+ STAY [3] key
Arms perimeter, bypasses interior, and sets entry/exit time. 1
2
3
4
4-digit user code
+ OFF [1] key
Disarms the system.
%61)(78%= =391%=)<-823;
AC STAY
(-7%61)( 6)%(=83%61
AC
OFF, AWAY and STAY are the commands most often used. Audible annunciation of commands: one tone from key 1, two tones from key 2, three tones from key 3. INSTANT AND MAXIMUM Higher security arming modes. 1
2
3
4
4-digit user code
+ INSTANT [7] key
READY
%61)(-278%28 =391%=)<-823;
AC STAY INSTANT
Arms perimeter, bypasses interior, and shuts off entry delay timer. 1
2
3
4
4-digit user code
+ MAXIMUM [4] key
Arms perimeter, interior, and shuts off entry delay timer. KEYOP-DEMO-FA 9/00
%61)(1%<-191 =391%=)<-823;
AWAY INSTANT
AC
FEATURE QUICK ARM (optional)
ALPHA SCREEN DISPLAY
# key followed by AWAY, STAY, INSTANT, or MAXIMUM will arm the system in that mode without having to enter the security code. BYPASS To bypass a zone (s) that are intact or violated, enter the following: 1
2
3
4
4-digit user code
Each zone can be bypassed independently (except fire zones). CHIME 3
AC STAY
=391%=)<-823;
&=4%771%78)6 &)(6331;-2(3;
AC BYPASS
[6] key
The screen will display the zone(s) that were bypassed so that the enduser can verify their accuracy.
2
%61)(78%=
+ BYPASS
+ zone no. to be bypassed (02).
1
FIXED-WORD SCREEN DISPLAY
4
4-digit user code
+ CHIME [9] key
(-7%61)(&=4%77 6)%(=83%61
AC BYPASS READY
(-7%61)(³',-1) 6)%(=83%61
AC CHIME READY
This puts the system into the chime mode, which causes an audible tone at the keypad whenever a perimeter sensor is violated while disarmed. Turn chime mode off by repeating the key sequence above. KEYPAD PANICS A speed key or 1
✴ pressed
AC
%0%61 430-'))1)6+)2'=
AC
%0%61 1)(-'%0
AC
*-6) *-6)
at the same time is programmed as zone 99, Fire. B speed key or ✴
# pressed
at the same time is programmed as zone 95, 24-hour audible. C speed key or 3
# pressed
at the same time is programmed as zone 96, 24-hour audible.
ALARM FIRE
ALARM
ALARM
KEYOP-DEMO-FA 9/00
