First Choice For Security, Control And Communication

Transcript

First Choice for Security, Control and Communication ISSUE No. 54 Quality Products for Professionals With the constant drive towards energy conservation we’ve highlighted over 50 energy saving products within our range Technical Advice Monday to Thursday Why not take advantage of our Technical Advice Service. Whether it’s a detailed specification for a project, advice on the right product, suitability for a particular environment or application, or simply a quotation, just give us a call. HOW TO CONTACT ERL Speak to one of our professionals, not a machine, whenever you call ERL Sales Orders 8.30am-5.00pm Tel: 01923 255344 Email: [email protected] Fax: 01923 255829 Technical Advice Service - Monday to Thursday Tel: 01923 220277 Email: Fax: [email protected] 01923 255829 Website www.electroreplacement.com Visit our website for more information New Products at a Glance Stainless Steel Audio Door Panels Stainless Steel Video Door Panels Architectural Modular Door Entry Systems Coded Access PAGE 2 PAGE 3 PAGE 4-5 PAGE 16 Hands Free Monitor Proximity Access System Emergency Door Release Maglocks PAGE 16 PAGE 26 PAGE 20, 21 Door Retainers Wireless Entry Alert Alarm Emergency Exit Alarm PAGE 24 PAGE 26 PAGE 27 PAGE 29 Call Point with Protective Cover Vandal Resistant Equipment Industrial Controls Electric Door Opening/Closing PAGE 29 PAGE 30 PAGE 60 PAGE 31 Toilet Alarm Kits CAT5E Patch Panels Wallplates with Cable Entry CAT5E Cables PAGE 33 PAGE 41 PAGE 44 PAGE 44 Bluetooth Dongle for Timeswitch Setup Staircase Lightswitch Timelag Controller PIR Motion Detectors Photo Electric Controls PAGE 45-46 PAGE 47 PAGE 8 3 Position Key Switch • • • UP OFF DOWN PAGE 36 PAGE 36 SECURITY STAINLESS STEEL AUDIO DOOR ENTRY SYSTEMS ADSS2 ADSS1 ADSSC1 ADSS6 PANEL SIZES LIGHTING CONTROLS TV AMPLIFIERS TIME CONTROLS DISABLED SECURITY 2 Flush Surface 197 x 90mm 200 x 92mm COMMUNICATIONS INDUSTRIAL CONTROLS & THERMOSTATS STAINLESS STEEL AUDIO DOOR ENTRY KITS Surface ADSS1/S ADSS2/S ADSS3/S ADSS4/S ADSS5/S ADSS6/S Flush ADSS1/F ADSS2/F ADSS3/F ADSS4/F ADSS5/F ADSS6/F Units each each each each each each Larger systems available P.O.A. FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION O R D E R I N G D ATA STAINLESS STEEL AUDIO DOOR ENTRY WITH CODED PANEL No. of Stations Surface 1 ADSSC1/S 2 ADSSC2/S Larger systems available P.O.A. DO YOU NEED A LOCK? SEE PAGES 19-22 FEATURES O R D E R I N G D ATA No. of Stations 1 2 3 4 5 6 INS/UP ADSSC2 Flush Units ADSSC1/F ADSSC2/F each each • Flat front panel made of stainless steel (2mm thick) • Available for flush or surface mounting • Digital 2-core installation • IP44 • Privacy Features: prevents overhearing between stations • Stainless steel back-lit button(s) • Back-lit name plate(s) • Speaker, microphone & balance. Can be individually adjusted • Lock opening (12V DC), timed 4 sec output • Additional input to connect door exit button • Magnetic handset retainer • Adjustable ringer volume • Integrated coded access (ADSSC1/2 range) • 300m max run • Additional features can be achieved using the CDN/USB interface cable along with the free software and the use of a computer. Optional modules available to control gates, lights, barriers etc. • Multiple handsets can be connected to each station (handset INS-UP 720 MR & DC power supply). Optional handsets/power supply are available. Handset INS-UP 720 MR for special order only. EACH KIT CONTAINS • Door Panel • Power Supply (12V AC) • Handset(s) (INS-UP) Catalogue No. ACCESSORIES Description Units CDN-I/O CDN/USB I/O Module suitable for Audio System Interface cable for App each each TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 Digital system 2 cores only required EMAIL [email protected] SECURITY SECURITY STAINLESS STEEL COLOUR VIDEO DOOR ENTRY SYSTEMS 3 DISABLED TIME CONTROLS PANEL SIZES Flush Surface VDSSC2 VDSSC1 286 x 90mm 288 x 92mm TV AMPLIFIERS VDSS3 VDSS2 VDSS1 DO YOU NEED A LOCK? SEE PAGES 19-22 LIGHTING CONTROLS VDMONB7 VDMONW7 DOOR PANEL FEATURES Units each each each Units each each each each each each each each each EACH DOOR KIT CONTAINS • Door Panel • Power Supply (max 3 monitors) • Back Box SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS ACCESSORIES Description 4” Video Monitor 7” Video Monitor - White 7” Video Monitor - Black Audio handset for Video System Module for Video Panels Proximity Fob PSU for Video (3 output) Electric Door Lock 8-12V AC/DC Interface cable for App TEST EQUIPMENT & TOOLS Catalogue No. VDMON4 VDMONW7 VDMONB7 VDHS PRO-I/O PFOB VDPSU EDL CDN/USB CABLE PROTECTION STAINLESS STEEL CODED ACCESS VIDEO DOOR ENTRY KITS No. of Stations Surface Flush Units 1 VDSSC1/S VDSSC1/F each 2 VDSSC2/S VDSSC2/F each INDUSTRIAL CONTROLS & THERMOSTATS STAINLESS STEEL VIDEO DOOR ENTRY KITS No. of Stations Surface Flush 1 VDSS1/S VDSS1/F 2 VDSS2/S VDSS2/F 3 VDSS3/S VDSS3/F MONITOR FEATURES 4" Monitor (VDMON4) • Wide angle lens (adjustable) • Manual monitor ON function • Built in proximity token reader (max • Magnetic phone holder 10 fobs per station - not supplied) • LCD Screen – Colour • Infra-red lighting 7" Monitor (VDMONW7 or • Connect using Cat 5e with (RJ45) or VDMONB7) without terminals (screw block) • Intercom between monitors (audio) • Max run 70m (upto 300m using additional PSU’s) Door Station to • Selectable ring tone Monitor • Adjustable volume/colour/brightness • IP44 • Manual monitor ON function • Timed lock output 12V DC (4 sec ON) (max 30 minutes) • Simple set up coding procedure • Simple set up coding procedure • Heated Camera • Available with black or white frame • Hands free operation Add monitor(s) of your choice and additional Power Supply(s) as required • Lock override facility Add lock as required. Lock output 12V DC • Acoustic feedback on button activations • Glass LCD screen with touch switches Note: Additional Power Supply(s) and interfaces maybe required. • Lock override facility • Proximity token audible notification to Note: A handset (VDHS) is available Monitor where audio communication will suffice. COMMUNICATIONS VDMON4 SECURITY 4 DISABLED SECURITY ARCHITECTURAL MODULAR RANGE - AUDIO/ACCESS CONTROL TIME CONTROLS HT40 COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS APT/A1 APT/A2 PANEL SIZES: 1 2 3 4 Surface Flush APT/A1/S APT/A2/S APT/A3/S APT/A4/S APT/A1/F APT/A2/F APT/A3/F APT/A4/F Units each each each each ACCESSORIES Description Additional Handset – White Security Plate Pin Key Units each each • 2 wire Qwikbus wiring • Simple installation and set-up • Surrounds - high quality aluminium castings (1-8 module size) for both fascia and surface housing • ABS module fascia • Surrounds/modules can be hung vertically or horizontally (e.g.3x1 or 1x3) • Slim door panels: Flush (16mm) and surface (42mm) mounting • Titanium coloured finish (Titan). Other finishes available to order. • Magnetic handset hang-up (HT40 & VH40) • Adjustable ring tones and volume • 12V AC lock output • Noble crystal glass screens with touch Screen functions (video) TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS APPLICATIONS FUSES & GENERAL PRODUCTS SEE PAGES 19-22 FEATURES Larger systems available P.O.A. Catalogue No. HT40 13510 DO YOU NEED A LOCK? 244 x 130mm O R D E R I N G D ATA ARCHITECTURAL AUDIO DOOR ENTRY KITS No. of Stations APT/A4 APT/A3 Ideal for applications where both style and high quality products are required. We are able to offer a range of Kits made up of panels and modules for both video and audio receivers. These Kits can be for a single dwelling, apartments and commercial applications. Hands-free monitors and phones are available Also available are additional modules and panels to enhance the system and/or to further control access. Choose from a simple key switch through to a fingerprint reader. EACH AUDIO KIT CONTAINS • • • • • • 2 module surround Call button(s) module Audio module Surface or flush back box Handset(s) Power supply/amplifier CABLE REQUIREMENTS 2 core MAXIMUM CABLE RUN Cable Spec (mm) 0.6 0.8 1.0 Audio (m) 150 300 450 Video (m) 75 150 225 MODULES AVAILABLE 1 2 3 4 Video Camera Single Push Information Motion Detector 1 5 6 7 8 2 9 10 11 12 Digital Display Triple Push Double Push Entry Keypad – Plastic Proximity Card Reader 3 13 14 15 16 Audio Double Push Blanking Plate Fingerprint Reader 4 TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 5 6 Entry Keypad – Metal Quad Push Coded Entry Key Switch 7 8 EMAIL [email protected] 5 SECURITY SECURITY ARCHITECTURAL MODULAR RANGE - VIDEO/ACCESS CONTROL HF Monitor DISABLED TIME CONTROLS APT/V3 APT/V2 PANEL SIZES: APT/V4 VFS1000 344 x 130mm LIGHTING CONTROLS O R D E R I N G D ATA ARCHITECTURAL COLOUR VIDEO DOOR ENTRY KITS No. of Hands Free Hands Free Units Stations Surface Flush Surface Flush 1 APT/V1/S APT/V1/F APT/V1HF/S APT/V1HF/F each 2 APT/V2/S APT/V2/F APT/V2HF/S APT/V2HF/F each 3 APT/V3/S APT/V3/F APT/V3HF/S APT/V3HF/F each 4 APT/V4/S APT/V4/F APT/V4HF/S APT/V4HF/F each COMMUNICATIONS VH40 Larger systems available P.O.A. ACCESSORIES Catalogue No. Description 13510 Security Plate Pin Key VH40 Video Monitor with Handset VFS1000 Video Monitor Units each each each INDUSTRIAL CONTROLS & THERMOSTATS EACH VIDEO KIT CONTAINS CABLE REQUIREMENTS 2 core 3 module surround Video module Call button(s) module Audio module Surface or flush back box Monitor(s) Power supply/amplifier DO YOU NEED A LOCK? SEE PAGES 19-22 CABLE PROTECTION MODULES AVAILABLE 5 6 7 8 Video Camera Single Push Information Motion Detector 10 11 12 9 10 11 12 13 14 15 16 Audio Double Push Blanking Plate Fingerprint Reader 13 14 Entry Keypad – Metal Quad Push Coded Entry Key Switch 15 16 SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS 9 Digital Display Triple Push Double Push Entry Keypad – Plastic Proximity Card Reader TEST EQUIPMENT & TOOLS 1 2 3 4 TV AMPLIFIERS APT/V1 SECURITY DELUXE DOOR ENTRY SYSTEMS DISABLED SECURITY 6 TIME CONTROLS HT3003W with TZ1003 DPK1F DPK1S SECURITY DO YOU NEED A LOCK? SEE PAGES 19-22 STYLE COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS With DPK2S DPK8S DPK10S INDUSTRIAL CONTROLS & THERMOSTATS DPK4S DPK6S FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION O R D E R I N G D ATA DOOR ENTRY KITS Surface Mounted Flush Mounted No. of Stations Silver Effect Silver Effect 1 2 3 4 5 6 7 8 10 12 DPK1S DPK2S DPK3S DPK4S DPK5S DPK6S DPK7S DPK8S DPK10S DPK12S DPK1F DPK2F DPK3F DPK4F DPK5F DPK6F DPK7F DPK8F DPK10F DPK12F Larger systems available P.O.A. Note: A spare button is required on panel if “Tradesman facility” is required. (DUO/N) Cable Core 6 7 8 9 10 11 12 13 15 17 APPLICATIONS Extremely robust, hard wearing and attractive systems, ideally suited for applications that require a single or multi-station facility. Systems can be ordered as a kit with surface or flush mounting panels, or as individual items for bespoke applications. EACH KIT CONTAINS • Door Entry System Panel • Telephone Handset(s) • NH200TV Power Supply/Amplifier for cable runs up to 80 metres and for powering a 12V AC lock, e.g. EDL WHY NOT ORDER ONE OF OUR MULTIMETERS TO HELP YOU INSTALL OUR PRODUCTS? SEE PAGE 64 TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 7 O R D E R I N G D ATA ILLUMINATED NAMEPLATES D E S I G N E R D O O R E N T RY K I T S Description Units DPK501 DPK502 HT3003W TZ1003 EDL 1 Station Kit 2 Station Kit White Handset Handset Desk Mounting Kit Electric Door Lock 8-12V AC/DC each each each each each APPLICATIONS Stylish door entry kits, ideally suited for modern residential and commercial buildings. MR SM ITH MRS JO NES DPK502 CABLE REQUIREMENTS DPK501 - 5 Core DPK502 - 6 Core Add 1 core if using lock DO YOU NEED A LOCK? EXPANDABLE UP TO 3 HANDSETS PER STATION DELUXE DOOR ENTRY SYSTEMS (cont’d) O R D E R I N G D ATA T E L E P H O N E H A N D S E T S - M A X I M U M 3 P E R S TAT I O N Incorporating a door lock release button. Designed for wall mounting as standard. Maximum of 3 handsets can be connected per station. Catalogue No. Description Units HT3003W TZ1003 White Handset Handset Desk Mounting Kit each each Catalogue No. Description HT3003/R7 White Handset with Variable Tone Inset Units Units TT1F TT2F TT3F TT4F TT5F TT6F TT7F TT8F TT10F TT12F each each each each each each each each each each 200 x 130 225 x 130 250 x 130 275 x 130 300 x 130 325 x 130 350 x 130 250 x 205 275 x 205 300 x 205 Description Units NH200TV NH200HV Power Supply/Amplifier up to 80m run Power Supply/Amplifier up to 150m run each each each ELECTRIC DOOR LOCK EDL Electric Door Lock 8-12V AC/DC suitable for surface/recessed mounting locks fixed to wooden doors opening inwards. (fail secure). Description Units EDL Electric Door Lock 8-12V AC/DC each each DOOR ENTRY SYSTEM SPARES Catalogue No. Description Units SP70 SP50 TE70 TE50 TT/MIC 10510 10530 10548 NS1 R2007 70mm Speaker 50mm Speaker Microphone/70mm Speaker Assembly Microphone/50mm Speaker Assembly Microphone TT Panel Push Button TT Panel Neon Lamp for Surface TT Panel Neon Lamp for Flush TT Panel 3 Station+ Units Handset Buzzer Variable Tone Inset each each each each each each each each each each SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS Catalogue No. EXTENSION SOUNDER AC/DC Extension Sounder TEST EQUIPMENT & TOOLS D O O R / G AT E O P E N I N G M O D U L E RT27 CABLE PROTECTION Catalogue No. 2 Door Intercommunication/Opening Module Catalogue No. H x W (mm) each each each each each each each each each each 206 x 134 231 x 134 256 x 134 281 x 134 306 x 134 331 x 134 356 x 134 256 x 210 281 x 210 306 x 210 each POWER SUPPLIES/AMPLIFIERS AC/DC single units, fitted with an adjustable gain control for speech/volume adjustment to suit local background noise. TU1007A Units TT1S TT2S TT3S TT4S TT5S TT6S TT7S TT8S TT10S TT12S INDUSTRIAL CONTROLS & THERMOSTATS T E L E P H O N E H A N D S E T S - M A X I M U M 1 0 P E R S TAT I O N All handsets must be same type. Catalogue No. H x W (mm) COMMUNICATIONS ADDITIONAL/INDIVIDUAL ACCESSORIES DOOR ENTRY SYSTEM PANELS Surface Mounted Flush Mounted Aluminium standard finish Aluminium standard finish LIGHTING CONTROLS SEE PAGES 19-22 TV AMPLIFIERS • Door Panel • Telephone Handset(s) • NH500TV Power Supply/Amplifier for cable runs up to 80 metres and for powering a 12V AC lock, e.g. EDL Stylish slimline door panel (surface) Aluminium silver finish front panel Illuminated buttons and name plates Up to 3 handsets per station High quality audio communication TIME CONTROLS EACH KIT CONTAINS DPK501 FEATURES • • • • • DR YES 1 THE PLACE LONDON E11 1EL DISABLED Catalogue No. SECURITY DESIGNER DOOR ENTRY SYSTEMS SECURITY DESIGNER COLOUR VIDEO DOOR ENTRY SYSTEM O R D E R I N G D ATA VANDAL RESISTANT ULTRA SLIM 30mm MONITOR DISABLED SECURITY 8 EXPANDABLE TIME CONTROLS Catalogue No. Description Units VID1/HF/CS VID1/HF/CM EDL T4812/N Single Station Kit Colour Additional Monitor Colour Electric Door Lock 8-12V AC/DC Transformer 12V AC each each each each FEATURES VID1/HF/CS TIMED LOCK RELEASE DO YOU NEED A LOCK? SEE PAGES 19-22 TV AMPLIFIERS D E S I G N E R V I D E O D O O R E N T RY • High quality video and audio output • Will operate at low light levels • Up to 3 additional monitors and additional door panel • Volt free lock output (requires separate power supply and lock) • Monitor incorporates ‘spy facility’ button, allowing camera view to be seen without door panel button being activated • Ring/Speech volume, colour and brightness controls EACH KIT CONTAINS • Door Panel (surface) (58x135x49mm) • Monitor (7” LCD screen) (221x147x30mm) • Power supply (DIN/surface) to monitor PRODUCT SPECIFICATION System incorporates wide angle camera lens, capable of working at low light levels (white LED illumination). If fitting EDL, a T4812/N is required. CABLE REQUIREMENTS 4 core cable ECONOMY DOOR ENTRY SYSTEM O R D E R I N G D ATA TIMED LOCK RELEASE LIGHTING CONTROLS BACKLIT NAME PANEL E C O N O M Y V I D E O D O O R E N T RY Catalogue No. Description Units VID1/ES EDL T4812/N Single Station Kit (black/white) Electric Door Lock 8-12V AC/DC Transformer 12VAC each each each EACH KIT CONTAINS VID1/ES SEE PAGES 19-22 • • • • 1 x Door Panel (surface) 1 x Monitor Power Supply (monitor) Fixing Kit CABLE REQUIREMENTS 4 core cable O R D E R I N G D ATA B & W A N D C O L O U R V I D E O D O O R E N T RY K I T S VANDAL RESISTANT HIGH QUALITY EXPANDABLE VD1/CK DO YOU NEED A LOCK? SEE PAGES 19-22 Catalogue No. Description Units VD1/BWK VD1/CK VCD1/MON VCD1/CK/MON EDL T4812/N Single Station Kit (black/white) Single Station Kit (Colour) Additional Monitor (black/white) Additional Monitor Colour Electric Door Lock 8-12V AC/DC Transformer 12V AC each each each each each each EACH KIT CONTAINS FEATURES VIDEO & AUDIO OUTPUT TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS DO YOU NEED A LOCK? Quality video and audio output Metal silver finish door panel (surface) Volume and brightness controls Will operate at low light levels Monitor incorporates ‘spy facility’ button, allowing camera view to be seen without door panel button being activated • Volt free lock output (requires separate power supply and lock) B&W AND COLOUR VIDEO DOOR ENTRY SYSTEMS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS FEATURES • • • • • VD1/BWK • Quality video and audio output • Compact metal door panel (surface) • Expandable run up to 4 monitors and 2 door panels • Ring/Speech volume, colour and brightness controls • Will operate at low light levels (LED illumination) • Monitor incorporates facility for camera view to be seen without door panel button being activated • Volt free lock output (requires separate power supply and lock) • IP55 • • • • 1 x Door Panel (surface) 1 x Monitor Power Supply (monitor) Fixing Kit CABLE REQUIREMENTS 4 core cable TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 9 O R D E R I N G D ATA EXPANDABLE UP TO 3 ADDITIONAL MONITORS V I D E O D O O R E N T RY / C O D E D A C C E S S K I T S Description VCD1 VCD1/MON VCD1/CK VCD1/CK/MON EDL PS1A25SM12 1 Station Kit - black/white Monitor - black/white 1 Station Kit - Colour Additional Monitor - Colour Electric Door Lock 8-12V AC/DC 1.25A 12V In-line Switch-Mode Power Supply Units each each each each each each DO YOU NEED A LOCK? DISABLED Catalogue No. SECURITY B/W AND ACCESS COLOURAUDIO CODEDDOOR ACCESSENTRY VIDEOSYSTEM DOOR ENTRY SYSTEM CODED SEE PAGES 19-22 TIME CONTROLS APPLICATIONS Suitable for houses, shops, offices, industrial units and any security sensitive areas where entry should be restricted. FEATURES • Robust slimline door panel with integral rain shield • Combines video door entry with coded access facility • Slimline 1 Station Door Panel - surface size 76(W)x181(H)x59(D) • Monitor (black/white) size 195(W) x245(H)x85(D) • Power Supply (each monitor) • Fixing Kit • Can add 3 additional monitors • Good quality 2 way communication and video • Illuminated press buttons on door panel • Works at low light levels • 50 user coded access panel • Programmable lock timer (1-99 secs) • Volt free lock output • Slimline 1 Station Door Panel - surface size 76(W)x181(H)x59(D) • Monitor (Colour) size 195(W) x245(H)x85(D) • Power Supply (each monitor) • Fixing Kit • Can add 3 additional monitors • Good quality 2 way communication and video • Illuminated press buttons on door panel • Works at low light levels • 50 user coded access panel • Programmable lock timer (1-99 secs) • Volt free lock output VCD1 ILLUMINATED BUTTONS COMMUNICATIONS VCD1/CK LIGHTING CONTROLS VCD1 TV AMPLIFIERS EACH KIT CONTAINS INDUSTRIAL CONTROLS & THERMOSTATS CABLE REQUIREMENTS 4 common cores between monitor and door station Note:A suitable 12V DC power supply (not supplied) must be installed to power coded access and lock. Can include up to 2 door panels and up to 4 monitors per system. CABLE PROTECTION FUSES & GENERAL PRODUCTS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 TEST EQUIPMENT & TOOLS VCD1/CK SECURITY SECURITY 10 DESIGNER ELECTRONIC DOOR ENTRY SYSTEMS (AUDIO) O R D E R I N G D ATA 4110/AL/F No. of Stations Surface Mounted Flush Mounted 1 2 3 4 5 6 8 10 4110/AL/S 4220/AL/S 4130/AL/S 4140/AL/S 4150/AL/S 4260/AL/S 4280/AL/S 4210/AL/S 4110/AL/F 4220/AL/F 4130/AL/F 4140/AL/F 4150/AL/F 4260/AL/F 4280/AL/F 4210/AL/F Cable Core 5 6 7 8 9 10 11 12 ADDITIONAL ACCESSORIES 4140/AL/S TV AMPLIFIERS TIME CONTROLS DISABLED D E S I G N E R E L E C T R O N I C D O O R E N T RY K I T S ( A U D I O ) Catalogue No. Description Units T700 Handset EDL Electric Door Lock 8-12V AC/DC HS/DMK Desk Mounting Kit 711/AL 1-2 Station Rain Shield (Flush Only) 871/AL 1-2 Station Surface Box/Rain Shield (Slim) 705/AL 3-10 Station Rain Shield (Flush Only) 875/AL 3-10 Station/Combined Surface Box/Rain Shield (Slim) DUO/N Tradesman Timeswitch Larger systems available P.O.A. Note: A spare button is required on panel if “Tradesman facility” is required (DUO/N). each each each each each each each each LIGHTING CONTROLS APPLICATIONS Ideally suited for residential and commercial buildings requiring high quality, modern design door entry systems. 4260/AL/S 4280/AL/S PRODUCT SPECIFICATION COMMUNICATIONS The door panel is constructed from aluminium to give a long lasting weather resistant finish. Cabling requirements are 4 common cores plus an additional core per station. FEATURES INDUSTRIAL CONTROLS & THERMOSTATS • • • • • EACH KIT CONTAINS CABLE PROTECTION TEST EQUIPMENT & TOOLS • Separate handset/door panel volume control • 12V AC lock output eg EDL • Electronic call sound • Internal or external use • Optional rain shield available T700 4210/AL/S FUSES & GENERAL PRODUCTS Modern attractive design Flush or surface mounting kits Up to 3 handsets per station High quality audio communication Illuminated metal push buttons and name plate T700 with HS/DMK • Door panel • Handset(s) • 12V AC Transformer (surface/DIN rail mounting) • Vandal resistant fixing screws and tool DESK MOUNTING KIT 871/AL DO YOU NEED A LOCK? SEE PAGES 19-22 TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] SECURITY 11 SECURITY DESIGNER ELECTRONIC DOOR ENTRY SYSTEMS (VIDEO) APPLICATIONS Ideally suited for residential and commercial buildings requiring high quality, modern design door entry systems. O R D E R I N G D ATA DISABLED DESIGNER ELECTRONIC DOOR ENTRY KITS (VIDEO) No. of Stations No. of Stations B&W Surface B&W Flush Unit 5110/AL/S 5220/AL/S 5130/AL/S 5140/AL/S 5150/AL/S 5260/AL/S 5280/AL/S 5210/AL/S 5110/AL/F 5220/AL/F 5130/AL/F 5140/AL/F 5150/AL/F 5260/AL/F 5280/AL/F 5210/AL/F each each each each each each each each Colour Surface Colour Flush Each 5110/AL/FC each 5110/AL/SC 1 Colour systems available P.O.A. 5110/AL/F 5140/AL/S TV AMPLIFIERS ADDITIONAL ACCESSORIES Catalogue No. Units Description each each each each each each each each each each each 5280/AL/S 5260/AL/S COMMUNICATIONS PRODUCT SPECIFICATION The door panel is constructed from aluminium to give a long lasting weather resistant finish. Cable requirements are 3 common cores & co-axial cable or Cat 5e using EL560/EL562 adaptors regardless of size. LIGHTING CONTROLS Monitor (black/white) PMPLUS Monitor (colour) TEKNA/C Electric Door Lock 8-12V AC/DC EDL 1-2 Station Rain Shield (surface/flush) 711/AL 3-10 Station Rain Shield (surface/flush) 705/AL Handset T940PLUS 4 Outlet Splitter (co-axial) D4L-PLUS D6L-PLUS/2H 6 Outlet Splitter (Cat 5e) Tradesman Timeswitch DUO/N Door Station Adaptor (Cat 5e) EL-560 Monitor Adaptor (Cat 5e) EL-562 Note: A spare button is required on panel if “Tradesman facility” is required (DUO/N). TIME CONTROLS 1 2 3 4 5 6 8 10 ADJUSTABLE TILT CAMERA FEATURES • • Adjustable tilt (up/down) camera with polycarbonate ‘window’ • In-built infrared light ensures camera works in low light levels • Monitor intercom facility • “Secure” communication between caller and monitor • Reversible fascia, blue - grey • Optional rain shield available • Handset (T940PLUS) can be added where audio communication is sufficient • Multiple door/gate entrances possible 711/AL DO YOU NEED A LOCK? 5210/AL/S SEE PAGES 19-22 • • • • TEST EQUIPMENT & TOOLS EACH KIT CONTAINS CABLE PROTECTION • • • • Modern stylish design Flush or surface mounting Black/white or colour kits available Up to 3 monitors per station Illuminated metal push buttons and name plate Non-volatile memory Electronic call sound Internal or external use Separate monitor/door panel volume control 12V DC lock output - eg EDL INDUSTRIAL CONTROLS & THERMOSTATS • • • • • Door panel Monitor(s) 12V DC Power supply Vandal resistant fixing screws and tool TEKNA/C SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS PMPLUS SECURITY KITCHEN CALL INTERCOMS ADD UPTO 2 MORE HANDSETS DISABLED SECURITY 12 KITCHEN CALL INTERCOM Catalogue No. Description Units KIDP KIDP/2 HT3003W Kitchen Call Kit 2 Station Kitchen Call Kit Additional Handset each each each TIME CONTROLS APPLICATIONS FEATURES Commercial kitchens; ideal for use in restaurants, • Hands free conversation kitchen unit cafés and public houses where orders need to be • Adjustable volume communicated easily and quickly to the kitchen environment where hygiene is a priority. KIDP PRODUCT SPECIFICATION Surface wall panel (kitchen unit), handset(s) and power supply/amplifier. CABLE REQUIREMENTS 6 Core KIDP - EACH KIT CONTAINS KIDP/2 - EACH KIT CONTAINS • 1 Wall Panel • 2 Handsets • 1 Power Supply • 1 Wall Panel • 1 Handset • 1 Power Supply KEY CARD ENTRY / ENERGY CONTROL SYSTEM KCE2/CC/S CABLE PROTECTION ENERGY EFFICIENT USE OF LIGHT AND POWER IP65 TEST EQUIPMENT & TOOLS CREDIT CARD SIZE FUSES & GENERAL PRODUCTS O R D E R I N G D ATA K E Y C A R D E N T RY / E N E R G Y C O N T R O L K I T INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS O R D E R I N G D ATA KEY CARDS SURFACE MOUNTING - CAN BE USED FOR DOOR ENTRY AND/OR CONTROL OF LIGHTING AND POWER Catalogue No. Description Units KCE1/CC/S KCE2/CC/S CARD/CC EDL 1 Switch Key Card Entry/Energy Control Kit 2 Switch Key Card Entry/Energy Control Kit Key Card Pack of 10 Electric Door Lock 8-12V AC each each each each APPLICATIONS EACH KIT CONTAINS Offers a secure method of providing restricted • 1 or 2 surface mounting card switches entry as well as helping to reduce energy costs • Control unit (25A) for door entry, for hotels, boarding houses, schools and lighting and air conditioning etc. colleges, conference centres, fitness clubs, • 10 x Key Cards offices, laboratories and research establishments. FEATURES • Suitable for installation in three different ways: 1) One card switch installed outside a room or building and one card switch installed inside the room or building provides door entry (when wired to an appropriate door lock) and switching of lighting, air conditioning etc 2) One card switch installed outside a room or building - provides door entry (when wired to an appropriate door lock) 3) One card switch installed inside the room or building - provides switching of lighting, air conditioning etc • Weatherproof (IP65) card switches suitable for installation indoors and outdoors • Can be installed with an appropriate door lock enabling room access to keycard holders only • Energy efficient use of light and power • 35 second delay after card is removed allows safe exit from room • Back-lit card ‘sense’ indicator • Neon locator • Credit card size key cards • Additional key cards available • 2 separate memories (max 20 cards, 2 x 10) e.g. guests and staff TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] SECURITY SECURITY DOOR ENTRY SYSTEMS 13 O R D E R I N G D ATA D E L U X E E C O N O M Y D O O R E N T RY S Y S T E M S Catalogue No. Description Units DPK1/ES EDL 1 Station Kit Electric Door Lock 8-12V AC/DC each each DISABLED APPLICATIONS Recommended for applications where 1 station will suffice. CABLE REQUIREMENTS 2 Core (min) EACH KIT CONTAINS TIME CONTROLS • 1 x Door station (surface) • Handset • Transformer 8V AC FEATURES Smart, slimline door panel Door release function (volt free) Surface mounted Brushed Aluminium Fascia TV AMPLIFIERS • • • • FLASHING INDICATOR LIGHT DPK1/ES • LED push call indicator • Electronic call tone • Flashing LED light (hearing impaired) LIGHTING CONTROLS SEE PAGES 19-22 UNIVERSAL REPLACEMENT HANDSET + ACCESSORIES Catalogue No. Description Units URH/HSN URH/DF HS/DMK Universal Handset Decorative Frame Desk Mounting Kit each each each URH/DF INDUSTRIAL CONTROLS & THERMOSTATS O R D E R I N G D ATA UNIVERSAL REPLACEMENT HANDSET COMMUNICATIONS DO YOU NEED A LOCK? URH/HSN CABLE PROTECTION APPLICATIONS For use with most Door Entry systems. 5 wire FEATURES Ideal as a replacement or additional handset for existing systems Wall or desk mounting Attractive styling Door release function Will work with most 5 wire systems i.e. BPT, Comelit, Eagle, Farfisa, Fermax, LT Terraneo, Siedle, Urmet, Videx etc. • Decorative frame option, minimises redecoration • Desk mounting kit option SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS URH/HSN with URH/DF TEST EQUIPMENT & TOOLS FRAME TO COVER UNSIGHTLY BLEMISHES WHEN REPLACING URH/DMK OLD HANDSET • • • • • SECURITY CODED ACCESS AUDIO DOOR ENTRY PANEL AUDIO & CODED ACCESS O R D E R I N G D ATA CODED ACCESS AUDIO DOOR ENTRY PANEL No. of Stations Catalogue No. TIME CONTROLS DISABLED SECURITY 14 LIGHTING CONTROLS TV AMPLIFIERS 4403/AL/F with 705/AL T940 PLUS DO YOU NEED A LOCK? SEE PAGES 19-22 Description Units 1 to 999 4403/AL/F Flush Coded Access Door Entry Panel 1 to 999 4403/AL/S Surface Coded Access Door Entry Panel Select handset quantity to match number of stations and appropriate power supply(s) T940PLUS White Handset FA-PLUSC Power Supply - handset or monitor 10 max. FA-PLUS/2 Power Supply - handset or monitor 50 max. 705/AL 3-10 Station Rain Shield (Flush Only) EDL Electric Door Lock 8–12V AC/DC each each each each each each each APPLICATIONS The combined door intercom and coded access panel is ideally suited to residential and commercial buildings where multi-user, secure access is required with high quality fittings. PRODUCT SPECIFICATION • Aluminium construction door panel for long lasting weather resistance • Cabling requirements: 4 common cores plus one additional core per station • Multiple entrance facility • Digital display FEATURES • Flush or surface mounting door panels • 1 to 999 stations • Up to 3 handsets per station • High quality audio communication • Illuminated metal push buttons and nameplate • Separate handset/door panel volume control • Electronic call sound • Internal or external use • Non-volatile memory • 12V DC timed lock output e.g. EDL • Two access codes possible • Integral tradesman timer CODED ACCESS VIDEO DOOR ENTRY PANEL O R D E R I N G D ATA VIDEO & CODED ACCESS 1 to 999 1 to 999 CABLE PROTECTION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS Units 5403/AL/F Flush Coded Access B&W Video Door Entry Panel 5403/AL/S Surface Coded Access B&W Video Door Entry Panel B&W monitor quantity to match number of stations and appropriate power supply(s) PMPLUS Black/white Monitor T940PLUS White Handset FA-PLUSC Power Supply – handset or monitor 10 max. FA-PLUS/2 Power Supply – handset or monitor 50 max. 705/AL 3-10 Station Rain Shield (Flush Only) EDL Electric Door Lock 8–12V AC/DC EL-560 Cat 5e Door Station Adaptor EL-562 Cat 5e Monitor Adaptor INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS CODED ACCESS VIDEO DOOR ENTRY PANEL No. of Stations Catalogue No. Description 5403/AL with 705/AL DO YOU NEED A LOCK? SEE PAGES 19-22 PMPLUS each each each each each each each each each each APPLICATIONS The combined video door intercom and coded access panel is ideally suited to residential and commercial buildings where multi-user, secure access is required with high quality fittings. PRODUCT SPECIFICATION • Aluminium construction door panel for long lasting weather resistance • Cabling requirements: 3 common cores and co-axial cable or Cat 5e cable using EL-560/EL-562 adaptors. • Multiple entrance facility • Digital display FEATURES • Flush or surface mounting door panels • Black and white or colour systems available • 1 to 999 stations • Up to 3 monitors per station • Illuminated metal push buttons and nameplate • Separate handset/door panel volume control • Electronic call sound • Internal or external use • Non-volatile memory • 12V DC timed lock output e.g. EDL • Adjustable tilt (up/down) camera with polycarbonate ‘window’ • In-built infrared light for low light operation • Monitor intercom facility • Secure communication between caller and monitor • Reversible monitor fascia, blue/grey • Handset (T940PLUS) can be added where audio communication is sufficient • Two access codes possible • Integral tradesman timer TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] SECURITY 15 SECURITY CODED ACCESS AUDIO DOOR ENTRY SYSTEM O R D E R I N G D ATA COMBINED DOOR ENTRY/CODED ACCESS SYSTEM Surface Mounted Flush Mounted 1 2 4113/AL/S 4223/AL/S 4113/AL/F 4223/AL/F NAME PANEL 4113/AL/F with 721/AL ADDITIONAL ACCESSORIES Description Units T-712VD EDL HS/DMK 721/AL Handset Electric Door Lock 8-12V AC/DC Desk Mounting Kit Rain Shield (Flush Only) each each each each APPLICATIONS One or two station audio door panel with coded access suitable for flats, shops, offices, industrial units, clubs and any security sensitive areas where entry should be restricted. EACH KIT CONTAINS T-712VD SLIMLINE PANELS ILLUMINATED BUTTONS • Door panel • Telephone(s) • Transformer FEATURES • Suitable for internal/external use • Surface or flush mounting • 8 lock codes can be programmed on either lock output • Memory retained after power loss • • • • • TV AMPLIFIERS CABLE REQUIREMENTS 4113 - 5 core 4223 - 6 core 4223/AL/F with 721/AL Wrong code timed lockout Anti tamper screws Additional handsets (max 3 per system) 12V AC lock output Name plate facility on door panel DO YOU NEED A LOCK? SEE PAGES 19-22 LIGHTING CONTROLS CODED ACCESS VIDEO DOOR ENTRY SYSTEM O R D E R I N G D ATA B/W Flush 5113/AL/F 5223/AL/F 1 2 No. of Stations B/W Surface Colour Flush 5113/AL/FC 5223/AL/FC ADJUSTABLE TILT CAMERA Colour Surface 5113/AL/S 5113/AL/SC 5223/AL/S 5223/AL/SC ADDITIONAL ACCESSORIES 1 2 Units Monitor (black/white) Monitor (colour) Electric Door Lock 8-12V AC/DC Rain Shield (Surface/Flush) Handset 4 Outlet Splitter (co-axial) 6 Outlet Splitter (Cat 5e) Monitor Adaptor (Cat 5e) each each each each each each each each NAME PANEL TEKNA/C 5223/AL/F with 721/AL DO YOU NEED A LOCK? SEE PAGES 19-22 FUSES & GENERAL PRODUCTS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 TEST EQUIPMENT & TOOLS APPLICATIONS One or two station video door panel with coded access suitable for flats, shops, offices, industrial units, clubs and any security sensitive areas where entry should be restricted. EACH KIT CONTAINS CABLE REQUIREMENTS • Door panel RG59 + 3 cores or Cat 5e • Monitor(s) Additional monitors will require EL-562 • Transformer • EL-560 and EL-562 (quantity to suit) FEATURES • Wrong code timed lockout • Suitable for internal/external use • Anti tamper screws • Surface or flush mounting • Additional monitors/handsets • 8 lock codes can be programmed on (max 3 per system) either lock output • Adjustable tilt camera • Non-volatile memory • Name plate facility on door panel • 12V DC lock output 5113/AL/F with 721/AL CABLE PROTECTION Description PMPLUS TEKNA/C EDL 721/AL T940PLUS D4L-PLUS D6L-PLUS/2H EL-562 INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. ILLUMINATED BUTTONS COMMUNICATIONS WHY NOT ORDER ONE OF OUR MULTIMETERS TO HELP YOU INSTALL OUR PRODUCTS? SEE PAGE 64 COMBINED VIDEO DOOR ENTRY/ CODED ACCESS SYSTEM No. of Stations TIME CONTROLS Catalogue No. DISABLED No. of Stations SECURITY STAINLESS STEEL PROXIMITY ACCESS SYSTEM IP44 DISABLED SECURITY 16 TIME CONTROLS TV AMPLIFIERS PFRDR PANEL SIZES: Flush 130 x 111 mm Surface 132 x 113 mm DO YOU NEED A LOCK? IP44 COMMUNICATIONS LIGHTING CONTROLS PFRDR/F PFRDR/S Proximity Fob Reader Kit - Flush Proximity Fob Reader Kit - Surface each each Catalogue No. PFOB CDN/USB ACCESSORIES Description Proximity Fob Interface Cable for App Units each each PFRDR FEATURES • Available in flush or surface options • Will work on 12V AC or DC input voltage • 2mm stainless steel front plate • IP44 rating • 12V DC timed (4 sec) lock output • Max 1536 proximity tokens can be programmed • Visual unlock display with 3 digit user number • Visual/audio unlock notification • External lock release option • 1A loading (24V) max CDN/USB FEATURES If using with optional USB and free Software via a computer • Control individual proximity fobs • Adjust timed lock output (1 sec to 10 sec) • Activate second coded relay output (0 sec to 10 sec) • Add modules to control lighting, additional locks etc. • Modify display EACH KIT CONTAINS Prox. Panel (flush or surface) Power Supply (12V DC) 3 x Proximity Fobs STAINLESS STEEL CODED ACCESS SYSTEM STAINLESS STEEL CODED ACCESS KEYPAD KIT Catalogue No. Description Units KRDR/F KRDR/S Standalone Keypad - Flush Standalone Keypad - Surface each each Catalogue No. Description Units CDN/USB Interface Cable for App each ACCESSORIES CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS APPLICATIONS Offices, computer rooms, schools, student accommodation, etc., where access needs to be restricted to authorised personnel. KRDR FEATURES CDN/USB FEATURES • Available in flush or surface options • Will work on 12V AC or DC input voltage • 2mm stainless steel front plate • IP44 rating • 12V DC timed (4 sec) lock output (Max 1A) • 255 pre programmed codes (requires user to enter allocation number and the pre programmed 4 digit code for higher security) or allows up to 8 user selected 4 digit codes • External lock releasee option • Visual/audio unlock notification • 1A loading (24V) max KRDR PANEL SIZES: TEST EQUIPMENT & TOOLS Units APPLICATIONS Offices, computer rooms, schools, student accommodation, etc., where access needs to be restricted to authorised personnel. SEE PAGES 19-22 FUSES & GENERAL PRODUCTS STAINLESS STEEL PROXIMITY ACCESS SYSTEMS Catalogue No. Description Flush 130 x 111 mm Surface 132 x 113 mm DO YOU NEED A LOCK? SEE PAGES 19-22 If using with optional USB and free Software via a computer • Control individual codes • Adjust timed lock output (1 sec to 10 sec) • Activate second coded relay output (0 sec to 10 sec) • Add modules to control lighting, additional locks etc. • Disable sounder • Timed or toggle lock output EACH KIT CONTAINS Keypad Panel (flush or surface) Power Supply (12V DC) TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] SECURITY 17 O R D E R I N G D ATA SCAP/K/P C O D E D A C C E S S PA N E L S A N D S Y S T E M S Units CAP/ES/P CAP/ESK CAP/EMK SCAP/K/P SCAP/K MOV14V each each each each each each Surface Mounted Panel - Aluminium Surface Mounted Kit - Aluminium Surface Mounted Kit - Aluminium Surface Mounted Panel - Metal Surface Mounted Kit - Metal Varistor Spike Suppressor CAP/EMK • 1 x Coded Access Panel • Power Supply (12V DC) • MMLK Mini Maglock (Internal) CABLE REQUIREMENTS 4 core alarm cable • • • • 1 TO 250 USER CODES ILLUMINATED KEYPAD 1 TO 20 USER CODES DO YOU NEED A LOCK? CAP/ESK CAP/EMK CAP/ES/P TOUCH SENSITIVE CODED ACCESS PANEL & SYSTEM O R D E R I N G D ATA T O U C H S E N S I T I V E C O D E D A C C E S S PA N E L & S Y S T E M Description Units EPX20 EPX20/APT EASIPROX/C CARD/EP FOB/EP MOV14V Surface Mounted Panel - Touch Sensitive Surface Mounted Kit - Touch Sensitive Easiprox Coder Proximity Cards, Pack of 10 Proximity Fob Varistor Spike Suppressor each each each each each each COMPACT, LOW PROFILE IP66 DO YOU NEED A LOCK? SEE PAGES 19-22 For EASIPROX/C features see page 18 SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS • Compact low-profile unit, measuring only 116 x 77 x 17mm • Up to 1000 users • Non volatile memory • Discrete, hidden secret-screw keypad mounting • Optional door bell function (requires 8 ohm, 0.5W speaker) TEST EQUIPMENT & TOOLS • Attractive, touch sensitive panel • Choice of three operating modes; coded access, proximity card/ keyfob, coded access and proximity card/keyfob • Suitable for internal and external use (fully encapsulated electronics) • Tri-colour LED illuminated keypad • Audible verification of operation EPX20/APT CABLE PROTECTION APPLICATIONS For internal and external applications, wherever access needs to be restricted and controlled. EACH KIT CONTAINS EPX20 EPX20/APT • 1 x Coded Access Panel •1 x Coded Access Panel • 5 x Keycards • 5 x Keycards • Power Supply (12V DC) • Electric Door Lock (12V DC) FEATURES TOUCH SENSITIVE INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. COMMUNICATIONS SEE PAGES 19-22 LIGHTING CONTROLS SCAP/K • 1 x Coded Access Panel • Power Supply (12V AC) • Electric Door Lock (12V AC) Available in kit and ‘panel only’ versions Vandal resistant 20 user code model - (CAP range) 250 user code model - (SCAP/K and /P) Robust aluminium fascia - (CAP range) Metal fascia- (SCAP range) Surface models Internal or external use Illuminated keypad (CAP range) Progressive times misuse lock out Non volatile memory Audio feedback on all facilities Timed exit circuit Voltage free relay contacts can provide fail-secure and fail-open door locking Two separate circuits - (CAP range) Lock override - (CAP range) CAP/ES/P - 12-24V DC operation SCAP/K/P - 10-18V AC/DC operation IP44 TV AMPLIFIERS CAP/ESK • 1 x Coded Access Panel • Power Supply (12V DC) • Electric Door Lock (12V DC) • • • • • • • • • • • • • • FLUSH APPEARANCE TIME CONTROLS EACH KIT CONTAINS FEATURES COMPACT DISABLED Catalogue No. Description APPLICATIONS Computer rooms, laboratories, offices, warehouses, research and development workshops. Any sensitive area where entry needs to be restricted. SECURITY CODED ACCESS PANELS & SYSTEMS SECURITY DISABLED SECURITY 18 PROXIMITY CARD/KEYFOB ACCESS SYSTEM (EASIPROX) INTERNAL OR EXTERNAL USE EASIPROX 1 TO 2000 TIME CONTROLS USERS TV AMPLIFIERS FOB/EP CARD/EP ALLOWS EASY REMOVAL/ ADDITION OF INDIVIDUAL CARDS O R D E R I N G D ATA PROXIMITY CARD ACCESS SYSTEM Catalogue No. Description Units EASIPROX CARD/EP FOB/EP EASIPROX/C Proximity Card Kit Pack of 10 Proximity Cards Proximity Fob Easiprox Coder each each each each APPLICATIONS Offices, computer rooms, schools, student accommodation, etc., where access needs to be restricted to authorised personnel. SYSTEM FEATURES • Easy to set up and use • 9 user cards supplied • Can be installed surface or flush in a standard 1 gang BS 25mm box • Suitable for internal or external use • Up to 2000 users using additional cards (CARD/EP) or fobs (FOB/EP) • Non volatile memory • LED and audio signal indication • Can be used with ‘push to exit’ switches • Volt free contacts (timed 1-42 sec) LIGHTING CONTROLS EACH KIT CONTAINS • Proximity Reader/Control Panel • 9 Proximity Cards • Power Supply (12V DC) • 1 Master Key Fob (for programming) EASIPROX/C DO YOU NEED A LOCK? PROXIMITY CARD/KEYFOB/CODED ACCESS SYSTEM SLIMLINE O R D E R I N G D ATA INDUSTRIAL CONTROLS & THERMOSTATS ILLUMINATED KEYPAD CABLE PROTECTION Catalogue No. Description Units SCAS/CP CARD/EP FOB/EP SCAS/P EASIPROX/C Surface mounted slimline kit Proximity Cards - pack of 10 Proximity Fob Surface mounted slimline panel Easiprox Coder each each each each each APPLICATIONS Sensitive areas where entry has to be restricted. Suitable for internal and external applications CARD/EP SCAS/CP TEST EQUIPMENT & TOOLS CODED PROXIMITY CARD/KEYFOB ACCESS SYSTEM COMPACT UNIT • • • • UP TO 1000 FOB/EP CARD USERS IP65 UP TO 10 PIN NUMBERS DO YOU NEED A LOCK? SEE PAGES 19-22 EACH KIT CONTAINS Keypad control panel/proximity reader • Power Supply (12V DC) Electric Door Lock (12V DC) • 3 x Proximity Cards 2 x Keyfobs • Installation Kit 2 x MOV/Diodes FEATURES • Slimline compact unit • Up to 1000 proximity card/keyfob and 10 pin numbers • 2 x individual user groups • Choice of access modes: Proximity card/keyfob only; coded access only; coded access together with proximity card/keyfob • Memory prevents duplicated card/fob setting • Non volatile memory • 9 x pin number codes (5 digit). • Robust aluminium housing with vandal resistant screw • Blue backlit keypad with audible response when pressed • Wrong input lockout function • Integral anti-tamper switch • Dual relays to control door lock switch or other devices (Volt free) • Weather resistant to IP65 • Lock timer (1-99 sec) • Available separately as panel only TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] COMMUNICATIONS COMMUNICATIONS SEE PAGES 19-22 FUSES & GENERAL PRODUCTS EASIPROX CODER FEATURES • Allows the addition or removal of a single card/fob without the need of totally clearing Easiprox users’ memory • Can be used at different sites but will only operate in conjunction with the master card/keyfob • Cannot be used by unauthorised personnel to gain access – must always be operated with the master card/ keyfob • Powered by PP3 9V battery, supplied • LCD display shows stored card/keyfob number • Compact 118 x 53 x 38mm size SECURITY 19 O R D E R I N G D ATA DOOR RELEASE LOCK KITS Catalogue No. Description Units LDRK/EMK LDRK/EMK/BPS each each each each each DISABLED each each each each TIME CONTROLS each each each LDRK/ECK LDRK/ECK/BPS each TV AMPLIFIERS LDRK/EDL Door Release Lock Kit LDRK/MMLK Door Release Lock Kit LDRK/MMLK/BPS Door Release Lock Kit (boxed power supply) LDRK/WE Wait/Enter Indicator Door Release Lock Kit LDRK/WE/BPS Wait/Enter Indicator Door Release Lock Kit (boxed power supply) LDRK/KDRS Door Release Lock Kit LDRK/KDRS/BPS Door Release Lock Kit (boxed power supply) LDRK/EMK Door Release Lock Kit (coded access) LDRK/EMK/BPS Door Release Lock Kit (coded access with boxed power supply) LDRK/ECK Door Release Lock Kit (coded access) LDRK/ECK/BPS Door Release Lock Kit (coded access with boxed power supply) RT15 Timer Board for DC Locks - 1-15 seconds RT110 Timer Board for DC Locks - 1 second to 10 minutes For Door Release/Exit switches see pages 23-24 SECURITY DOOR RELEASE LOCK KITS APPLICATIONS Enables doors to be opened remotely, securely and safely. Ideal for use in offices, jewellers, shops, schools, factories, warehouses etc. Kits are available with standard or heavy duty boxed power supplies which incorporate battery back-up APPLICATIONS: LDRK/EDL Suitable for surface/recessed mounting locks fitted to wooden doors opening inwards (fail secure). APPLICATIONS: LDRK/MMLK; LDRK/WE; LDRK/KDRS; LDRK/EMK; LDRK/ECK AND /BPS VERSIONS For inward or outward opening doors (fail safe). This style of lock is often used on doors which are part of a fire exit route. LDRK/MMLK MMLK magnetic lock 12V DC power supply Push switch Control relay/base LDRK/KDRS/BPS • MMLK magnetic lock • 12V DC boxed power supply with battery back-up facility • Keyswitch • Surface mounting box LDRK/KDRS LDRK/KDRS/BPS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS LDRK/EMK/BPS & LDRK/ECK/BPS • MMLK mini maglock (internal) • 12V DC boxed power supply with battery back-up facility • 1 x Coded Access Panel LDRK/WE/BPS • MMLK magnetic lock • 12V DC boxed power supply with battery back-up facility • Wait/Enter indictor panel • Door release switch TEST EQUIPMENT & TOOLS LDRK/EMK and LDRK/ECK • 1 x Coded Access Panel • 12V DC Power Supply • MMLK mini maglock (Internal) LDRK/WE LDRK/WE/BPS CABLE PROTECTION • • • • LDRK/MMLK/BPS • MMLK magnetic lock • 12V DC boxed power supply with battery back-up facility • Push switch • Control relay/base LDRK/MMLK LDRK/MMLK/BPS INDUSTRIAL CONTROLS & THERMOSTATS LDRK/WE MMLK magnetic lock 12V DC power supply Wait/Enter indicator panel Door release switch LDRK/KDRS MMLK magnetic lock 12V DC power supply Keyswitch Surface mounting box COMMUNICATIONS • • • • • • • • LIGHTING CONTROLS LDRK/EDL • EDL electric lock • 12V AC power supply • Push switch LDRK/EDL SECURITY TIME CONTROLS DISABLED SECURITY 20 FAIL SAFE LOCKS SAFETY END CAPS ESSENTIAL FOR ALL MMLK LOCKS MAGNETIC LOCKS (MMLK RANGE) MMLK MMLK/T SEC/APT FOR INTERNAL USE MMLK/E SUPPLIED WITH MOUNTING BRACKETS FOR EXTERNAL USE TV AMPLIFIERS MMLK, DMLK, MMLK/E COMPACT ONLY 71 x 32 x 21mm FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS MMLK/H SEE PAGES 66-67 FOR POWER SUPPLIES O R D E R I N G D ATA FAIL SAFE / OPEN / SECURE LOCKS Catalogue No. Description Units MMLK MMLK/T MMLK/E MMLK/H MEML/K MPSD312/N RT15 RT110 Mini Maglock (Internal) 12V/24V DC with brackets Mini Maglock with Timer 12V/24V DC Mini Maglock (External) with Z bracket Mini Maglock/Handle (Internal) Micro Electro-Magnetic Lock (Internal) Power Supply 12V DC Timer Board for DC Locks - 1-15 seconds Timer Board for DC Locks - 1 second to 10 minutes each each each each each each each each O R D E R I N G D ATA SAFETY LOCK END CAPS Catalogue No. Description Units SEC/APT Pair of Safety End Caps for MMLK Locks each APPLICATIONS: SEC/APT For covering the exposed, hard-edged corners of mini maglocks, offering protection against injury. Fitted in minutes to new and existing installations.Protects against injury from sharp corners and edges. Offers an attractive finish to a mini maglock installation,mounting screws supplied MEML/K SUITABLE FOR OUTWARD OPENING DOORS APPLICATIONS: MMLK This internal use mini maglock operates by means of electro magnetic force. It is suitable for both inward or outward opening doors. It is supplied with Z and L mounting brackets. This style of lock is often used on doors which are part of a fire exit route. APPLICATIONS: MMLK/T As MMLK but includes a timed hold off (adjustable 1-100 secs) and door monitor circuit, built into magnet. APPLICATIONS: MMLK/E While similar in specification to the MMLK, this lock is designed for external use and therefore suitable for securing gates/doors etc where the magnet will be exposed to the elements. It is supplied with a fitted lead, Z mounting bracket and has a monitored circuit built into the magnet. This style of lock is often used on doors which are part of a fire exit route. APPLICATIONS: MMLK/H This is a fail safe magnetic lock incorporating a door grip. Designed for use with internal wooden and aluminium doors. Magnet attaches to door frame on inside of unit allowing door frame internal measurement to remain unaltered. Suitable for inward or outward opening doors. Door grip hides magnetic lock on closure. APPLICATIONS: MEML/K A micro electro-magnetic lock, ideal for use on cupboards and lockers in laboratories, pharmacies, hospitals, schools etc., where a door lock must open when voltage is removed or where a keyed lock is impractical. Compact size of only 71 x 32 x 21mm, suitable for outward opening doors and supplied with keeper plate and mounting screws. TECHNICAL SPECIFICATION Catalogue No. Type Operating Voltage(s) MMLK MMLK/T MMLK/E MMLK/H MEML/K MPSD312/N Fail safe Fail safe Fail safe Fail safe Fail safe Regulated 12/24V DC 300kg (600lb) 12/24V DC 300kg (600lb) 12/24V DC 400kg (800lb) 12/24V DC 300kg (600lb) 12/24V DC 36kg (80lb) 230V AC in 12V DC out - Power 1200mA Holding Force Use Internal Internal External Internal Internal Internal TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 21 ADJUSTABLE TIMER TO DELAY ACTIVATION SHOOT BOLT LOCK MMLK/AK DISABLED SUITABLE FOR INWARD AND OUTWARD OPENING DOORS SECURITY FAIL SAFE LOCKS EB300 TIME CONTROLS DMLK TV AMPLIFIERS MM1200BKT IP67 MM1200 FAIL SAFE / OPEN / SECURE LOCKS Description Units EB300 DMLK MM1200 MM1200BKT MMLK/AK MPSD312/N RT15 RT110 Shoot Bolt Double Mini Maglock (Internal) 12V/24V DC Midi Maglock (Internal/External) 12V/24V DC Z bracket for MM1200 Architectural Mini Maglock (Internal) with brackets Power Supply 12V DC Timer Board for DC Locks - 1-15 seconds Timer Board for DC Locks - 1 second to 10 minutes each each each each each each each each GENERAL APPLICATIONS APPLICATIONS: MOV14V Use across AC or DC lock coils to minimise risk of corruption/contact burn to door entry systems. APPLICATIONS: RT15: RT110 Timer Board, variable 1.5 to 16 secs (RT15), 1 sec to 10 mins (RT110), 12/24V DC, for use with door entry and magnetic locks. Allows timed unlocking of magnetic locks. Needs suitable enclosure and power supply. TECHNICAL SPECIFICATION Catalogue No. Type Operating Voltage(s) EB300 DMLK MM1200 MMLK/AK MPSD312/N Fail safe Fail safe Fail safe Fail safe Regulated 12V DC Bolted Internal 12/24V DC 2x300kg (600lb) Internal 12/24V DC 545kg (1200lb) Internal/External 12V DC 300kg (600lb) Internal 230V AC in 12V DC out - Power 1200mA Internal Holding Force SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS APPLICATIONS: DMLK This internal use double mini maglock operates by means of electro magnetic force. It is supplied with mounting bracket. This style of lock is often used on doors which are part of a fire exit route. Use TEST EQUIPMENT & TOOLS APPLICATIONS: MMLK/AK This is a very attractive, stylish way of installing an electro-magnetic lock. It is suitable for both inward and outward opening doors and ideal as part of a fire exit route. It is supplied with architectural Z and L brackets for inward opening doors. The L bracket can be used on its own for outward opening doors. NOTE: 12V DC Power Supply (MPSD312/N) suitable for use with all the above. See also boxed power supplies on page 67 CABLE PROTECTION These locks can be used in a variety of applications where, for reasons of door/gate opening or for safety, a lock must unlock when voltage is removed. APPLICATIONS: EB300 This internal use shoot bolt operates by means of a solenoid. It is suitable for both inward and outward opening doors. Door locking can be delayed by up to 9 seconds. Power consumption of only 0.3A when locked @12V DC APPLICATIONS: MPSD312/N In-line power supply giving a regulated 12V DC output @ 2.25 amps. Ideal for running any of the locks on pages 19-22. INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. APPLICATIONS: MM1200 This stainless steel magnetic lock is suitable for both internal and external use (IP67) and operates on 12/24V DC. Integral door monitoring circuit. Weight 5kg. Z and L brackets also available to suit. (MM1200BKT) COMMUNICATIONS O R D E R I N G D ATA SEE PAGES 66-67 FOR POWER SUPPLIES LIGHTING CONTROLS STYLISH ATTRACTIVE FINISH SECURITY SECURITY 22 FAIL OPEN/SECURE LOCKS O R D E R I N G D ATA S TA N D A R D L O C K S ( E D L R A N G E ) FAIL / OPEN / SECURE LOCKS EDL and EDL/F TIME CONTROLS DISABLED EDL/DC Units EDL EDL/F EDL/DC EDL/ANS EDL/UPVC EDL/UPVC/DC EDL/U MOV14V Electric Door Lock 8-12V AC/DC Electric Fail Open Lock Electric Door Lock 12V DC Electric Door Lock 12V DC Electric Lock for UPVC Doors 12V AC Electric Lock for UPVC Doors 12V DC Electric Fail Open/Secure Varistor Spike Suppressor each each each each each each each each TV AMPLIFIERS APPLICATIONS: EDL This is suitable for surface/recessed mounted locks fitted to wooden doors opening inwards (fail secure). APPLICATIONS: EDL/F This is a fail open solenoid operated lock for inward/outward opening internal doors (mortice type). This type of lock releases the door catch when the power is removed from the lock. APPLICATIONS: EDL/DC This is a fail secure solenoid operated lock for inward opening internal doors (mortice type). This type of lock secures the door catch when the power is removed from the lock. LIGHTING CONTROLS APPLICATIONS: EDL/ANS This is a fail open solenoid operated lock for outward opening external doors (mortice type). This type of lock releases the door catch when the power is removed from the lock. It is suitable for both hollow aluminium/metal frames (brackets supplied) and also wooden jambs. Monitoring circuit. APPLICATIONS: EDL/UPVC Stainless steel, suitable for use with UPVC doors opening inwards. Supplied with two flush mounting plates, one of which is a longer version with a cutout for a deadlock (not supplied). Available in AC and DC options. Adjustable face plate. COMMUNICATIONS INDUSTRIAL CONTROLS & THERMOSTATS Description GENERAL APPLICATIONS These locks can be used in a variety of applications where, for reasons of door safety, a lock must open or remain closed when voltage is removed. EDL/ANS APPLICATIONS: EDL/U An extremely versatile lock release with integral fail open and fail secure functions with either 12 or 24V DC operation. Suitable for installation on wooden frame doors, opening inwards. APPLICATIONS: MOV14V Use across AC or DC lock coils to minimise risk of corruption/contact burn to door entry systems. EDL/UPVC EDL/UPVC/DC CABLE PROTECTION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS Catalogue No. TECHNICAL SPECIFICATION Catalogue No. EDL/U Type EDL Fail Secure EDL/F Fail Open EDL/DC Fail Secure EDL/ANS Fail Open EDL/UPVC Fail Secure EDL/UPVC/DC Fail Secure EDL/U Fail Open/Secure Operating Voltage(s) 12V AC/DC 12V DC 12V DC 12V DC 12V AC 12V DC 12/24V DC Holding Force 400kg N/A N/A N/A Use Internal Internal Internal Internal Internal Internal Internal TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 23 IP66 SECURITY DOOR RELEASE/EXIT SWITCHES LARGE 22mm SWITCH IP66 DISABLED VANDAL RESISTANT EXIT SWITCHES IP66 TIME CONTROLS DRS/S ESN/S ES/S TV AMPLIFIERS IP66 LIGHTING CONTROLS WS433 ESGD/S ESNGD/S ESGD/S with SMF DOOR RELEASE SWITCHES Description Units ESGD/S ES/S ESN/S DRS/S ESNGD/S SMF Green Dome Door Release Switch - Surface 1 Gang Exit Switch - Surface 1 Gang Exit Switch Narrow - Surface Door Release Switch 22mm Push - Surface 1 Gang Green Dome Door Release Switch - Surface 1 Gang Surface Mounting Metal Frame - 1 Gang each each each each each each Transforms a momentary action normally open volt free contact into a timed wireless switch, sending a signal up to 50m and activating a device for between 1 second and 4 hours. Ideal for sounders/bells e.g. call for assistance systems and indirect control of lighting, or controlling electronically operated doors/gates/garage doors etc O R D E R I N G D ATA WS433 DOOR RELEASE SWITCHES Wireless Switcher RX and TX APPLICATIONS Specifically designed for access control systems or electric lock installations, where high usage is expected. WS433 FEATURES • Brushed stainless steel front plate • Vandal resistant • Surface mounting (box supplied) • Easy to operate • N.O. and N.C. circuits • Max. contact rating 2A @ 12/24V AC/DC • • • • • • 1 sec to 4 hours activation time 12/24V AC/DC operation Volt free contacts 1 x N/O and 1 x N/C 2A rated @ 24V DC (10,000 cycles) Program up to 12 remotes (TX) 75cm wiring harness EACH KIT CONTAINS 1 x TX Transmitter 1 x 9V Battery 1 x RX Receiver Instructions SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS ES & DRS/S Range: Supplied with green plastic surface box. (Can be flush mounted using 25 mm 1-gang deep box - not supplied) fitted on the surface For additional surface mounted security an SMF can be added to a flush box (not supplied). (Excludes ESN range) Small PCB 0.8 x 1.2 x 0.2 in 9V Battery operated (supplied) 50m range (line of sight) 433MHz trransmitting frequency Battery life - 60,000 operations (approx) Pre-terminated cables for battery and contacts • Will work with any volt free N/O contact TEST EQUIPMENT & TOOLS PRODUCT SPECIFICATION • • • • • • CABLE PROTECTION RX RECEIVER- TX TRANSMITTER FEATURES each INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. COMMUNICATIONS WS433 PRODUCT SPECIFICATION O R D E R I N G D ATA SECURITY BRUSHED STAINLESS STEEL DOOR RELEASE/EXIT SWITCHES IP55 KDRS/M/F & KDRS/F ALSO AVAILABLE MOMENTARY OR MAINTAINED VERSIONS DISABLED SECURITY 24 ESLP/S TIME CONTROLS PESLP/WS • • OFF • DOWN DRSP/S 80dB SOUNDER KRSD/F LIGHTING CONTROLS TV AMPLIFIERS UP ESER FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS DRS/GDS ESER FEATURES O R D E R I N G D ATA DOOR RELEASE SWITCHES Catalogue No. Description Units PESLP/WS Exit Switch - Surface 1 Gang ESLP/S Exit Switch - Surface 1 Gang KDRS/F Key Operated Switch (momentary) - Flush 1 Gang KDRS/M/F Key Operated Switch (maintained) - Flush 1 Gang ESER Combined Exit Switch/Emergency Door Release SMF Surface Mounting Metal Frame - 1 Gang DRSP/S Door Release Switch - Surface DRS/GDS Door Release Switch - Surface See page 32 for Disabled Persons Switches ROLLER SHUTTER DOOR SWITCH each each each each each each each each Catalogue No. Description Units KRSD/F 3 position key Switch (momentary) each • Convenient dual function product in a single housing • Surface mounting • Easy recognition, tough green moulding • Brushed stainless steel front plate • Double pole contacts • Security screws to aid vandal resistance • Emergency Door Release fitted with deformable plastic, no glass to break • Loud 80db warning plus red LED warning when Emergency Door Release activated, 12/24V DC 20mA • Hinged clear cover to prevent accidental operation • Simple key reset • Supplied with two reset keys and one hex wrench PESLP/WS and ESLP/S FEATURES • Coloured ring, easy recognition • Tough surface box (supplied) • Large 85mm push • Contact rating 2A @ 12/24V AC/DC • Stainless steel fascia PRODUCT SPECIFICATION KRSD/F APPLICATIONS Specifically designed for access control systems or electric lock installations, where high usage is expected. FEATURES – KDRS SERIES • Brushed stainless steel front plate • Max. contact rating 2A @ • Vandal resistant 12/24V AC/DC • Flush mounting (box supplied) or surface mount using SMF • Key operated version supplied with 2 keys Ideal for controlling security roller shutters/blinds. Central off position and two independent contacts for up/down operation KRSD/F FEATURES • • • • • Max contact rating 4A Stainless steel front plate Central off position and two independent contacts for up/down operation Supplied with 2 keys Flush box supplied (use SMF for surface mounting) DRSP/S FEATURES Spring operated rocker switch with NO/NC contact and having a 10A rating. Supplied with slim surface box. TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 25 SECURITY ASSISTANCE SYSTEMS ONLY 2 WIRES REQUIRED SZAK1/C4A RELAY SZAK2/C4A IP66 DISABLED WITH INTEGRAL TIME CONTROLS SZAK/PSU/C4A SZAK5/C4A SZAK4/C4A 10 ZONE NETWORK PANEL AVAILABLE (DIS10/C4A/NP) SEE PAGE 33 The kits can be expanded to use additional call points and a variety of options including overdoor lights and local reset points. A door monitoring kit (SZAK5/C4A) is available and includes an override switch. COMMUNICATIONS APPLICATIONS These kits offer a simple but effective method of calling for assistance or raising an alarm. On operating the momentary switch, the main panel gives both audible and visual indication which remains on until reset at the main panel. Using a concealed call button, (SZAK1/C4A) is ideal for doctors’ surgeries, interview rooms, banks, post offices, shops, pubs and clubs etc. The kit can be expanded to use additional call points and a variety of options including overdoor lights, local reset points and sounders. The highly visible IP66 rated call point (SZAK2/C4A) can be used in wet or steamy areas eg. pools, saunas and gyms etc. The non glass reset call point (SZAK3/C4A) This kit is designed to allow a caller to request assistance where steps of similar obstacles deny access to a customer (SZAK4/C4A) is ideal for use where broken glass would be a hazard i.e. food preparation areas, changing rooms etc. LIGHTING CONTROLS WIRELESS OPTION AVAILABLE (WS433) SEE PAGE 23 TV AMPLIFIERS SZAK3/C4A The SZAK/C4A/PSU panel is available to use with any volt free, normally open device to raise the call. FEATURES Catalogue No. Description • • • • RT27 FEATURES Clear electronic tone 2 wire connection Surface mounting 12V AC/DC operation Output approx 80 dBa SZAK1/C4A • Alarm Controller/Power Supply • Surface push SZAK2/C4A • Alarm Controller/Power Supply • Emergency push switch (IP66) SZAK3/C4A • Alarm Controller/Power Supply • Call for Assistance switch SZAK4/C4A • Alarm Controller/Power Supply • Reset call point (non-glass) SZAK5/C4A • Alarm Controller/Power Supply • Magnetic switch • Keyswitch Battery backup options (PP3) include standard alkaline battery, rechargeable battery or no battery. This applies throughout the range. SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS • • • • • 5 kits available, all expandable Attractive modern design Simple to install - 2 wire Re-chargeable battery back-up (optional) Constant sounder and flashing light alarm Several call points may be connected to one control panel Additional components available to expand the installation (DIS1/C4A/IND, DIS1/C4A/RP, RT27) and call push Relay output for building management input or for external devices as standard (1 amp voltage free contacts) TEST EQUIPMENT & TOOLS each each each each each each each each each each each each each each each each each each • • • • CABLE PROTECTION SZAK1/C4A Single Zone Kit MODULUX Additional Call Point for SZAK1/C4A SZAK2/C4A Single Zone Kit SC1/50/PFS/R Additional Call Point for SZAK2/C4A SZAK3/C4A Single Zone Kit PFAS Additional Call Point for SZAK3/C4A SMF Surface Mounting Metal Frame - 1 gang SZAK4/C4A Single Zone Kit RP/YS Additional Call Point for SZAK4/C4A SZAK5/C4A Door Monitor Kit M1 Additional Call Point for SZAK5/C4A SZAK/C4A/PSU Control Panel DIS1/C4A/IND Indicator Light/Sounder DIS1/C4A/RP Reset Point DIS1/C4A/BAT Rechargeable Battery RT27 AC/DC Extension Sounder DTA/RBK Replacement Battery Kit PS1A25SM12 1.25A 12V In-line Switch-Mode Power Supply Units EACH KIT CONTAINS INDUSTRIAL CONTROLS & THERMOSTATS O R D E R I N G D ATA E M E R G E N C Y / A S S I S TA N C E K I T S SECURITY ELECTROMAGNETIC DOOR RETAINERS (SURFACE & FLUSH WALL MOUNTING) SURFACE MOUNTING MANUAL TIME CONTROLS RELEASE BUTTON LEFT OR RIGHT HAND DOORS TV AMPLIFIERS LIGHTING CONTROLS Catalogue No. Description Units DR24/S DR24/F PSU24 SMF Surface Door Retainer Flush/Surface Door Retainer 24V Power Supply Surface Mounting Metal Frame - 1 gang each each each each APPLICATIONS Holds self-closing door open when energized and releases door when fire alarm/building management service system is activated or when power supply is interrupted. Can also be manually released. Ideal for use in schools, hospitals, theatres, offices, hotels etc. Can be fitted to new or existing doors. DR24/F Catalogue No. DR24/S DR24/F FEATURES • Stainless Steel fascia (DR24/F) • DR24/F can be flush mounted in a standard 1 gang 35mm box (not supplied) or surface mounted using the 35mm flush box and an SMF metal frame • Robust construction • Can be used with any type of right or left handed door • Low current draw • All units fitted with a manual release button • Anti-residual magnetism design • Adjustable armature ensures correct alignment with door • Optional power supply available (max 7 retainers) • Tested and certified to BS EN1155 TECHNICAL SPECIFICATION Input Voltage Current Draw 24V DC 60 mA 24V DC 50 mA Holding Force 36kg (80 lb) 32kg (70 lb) ELECTROMAGNETIC DOOR RETAINERS (SURFACE MOUNTING) O R D E R I N G D ATA E L E C T R O M A G N E T I C D O O R R E TA I N E R S INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS FLUSH MOUNTING CABLE PROTECTION TEST EQUIPMENT & TOOLS E L E C T R O M A G N E T I C D O O R R E TA I N E R S EACH KIT CONTAINS: • Door retaining magnet • Door retainer • Fixing kit DRM24S FUSES & GENERAL PRODUCTS O R D E R I N G D ATA DR24/S DISABLED SECURITY 26 Catalogue No. Description Units DRM24S DRM240S PSU24 Surface Door Retainer Surface Door Retainer 24V Power Supply each each each APPLICATIONS Holds self-closing door open when energized and releases door when fire alarm/building management service system is activated or when power supply is interrupted. Can also be manually released. Ideal for use in schools, hospitals, theatres, offices, hotels etc. Can be fitted to new or existing doors. EACH KIT CONTAINS: • Door retaining magnet • Door retainer • Fixing kit DRM240S Catalogue No. DRM24S DRM240S FEATURES • Stainless Steel fascia (DRM240S) • Robust construction and metal body • Can be used with any type of right or left handed door • Low current draw • All units fitted with a manual release button • Anti-residual magnetism design • Adjustable armature ensures correct alignment with door • Optional power supply available (max 7 retainers) (DRM24S) • Tested and certified to BS EN1155 (DRM24S) TECHNICAL SPECIFICATION Input Voltage Current Draw 24V DC 60 mA 240V AC 30 mA Holding Force 55kg (120 lb) 55kg (120 lb) TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 27 O R D E R I N G D ATA E N T RY A L E RT K I T S Description Units EPRB/K EPRB/S PBK PS312 Entry Alert Kit (reflective beam) Additional Speaker Kit for EPRB/K Entry Alert Kit Plug-in Power Supply (Internal Use) (2 required for PBK) each each each each APPLICATIONS Stand alone security kit, sounds when person crosses PIR beam path. Ideal for use in shops, restaurants, offices, factories, warehouses etc. • Battery (PP3 not supplied) or mains operation (not supplied) • Beam range 20m or 4m settings (to save battery) • 3 Sound options - alarm, chimes or off • Volume control • Internal • Low battery indication • Optional plug-in power supply (PS312) Use on 9V tapping (Internal use) - 2 required (1 required for each photocell) • Wide angle PIR operation • Desk or wall mounting PBK EACH KIT CONTAINS EPRB/K EPRB/K - Reflected Beam Entry Alert Kit 1 Infrared Photocell Reflector Unit Chime/Siren Alert Unit Power Supply ADDITIONAL SPEAKER KIT PBK - Entry Alert Kit • 1 x Transmitter • 1 x Receiver HEAR SOUND IN MULTIPLE LOCATIONS COMMUNICATIONS • • • • LIGHTING CONTROLS • Reflected beam operation • Only requires 1 photocell cabling connection • Mains transformers supplied • Chime/siren operates when beam path broken • Beam length max 7m • Speaker volume adjustable or turned off • Siren time adjustable (3 to 30 secs) • Internal use • Easy to set up • 10m plug-in wiring supplied (photocell to chime/siren) • Additional speaker extension kit(s) available (10m lead) (EPRB/S) (max 2 ext kits per beam) UP TO 20M TRANSMITTER RECEIVER RANGE TV AMPLIFIERS PBK FEATURES WIRELESS EPRB/S WIRELESS ENTRY ALERT KIT Description IP55 Units EPRB/WK Wireless Entry Alert Kit (reflective beam) EPRB/S Additional Speaker Kit for EPRB/WK each each EPRB/WK FEATURES • Additional wired (10m) speaker extension kit(s) available (EPRB/S) (max 2 ext kits per beam) • Wireless range up to 100m (sensor to speaker line of sight) • Add up to 5 sensors per speaker • Add unlimited number of speakers (wireless) EPRB/WK WIRELESS 100M RANGE CONTAINS EPRB/S SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS EPRB/WK - Wireless Reflected Beam Entry Alert Kit • 1 Infrared Photocell • Chime/Siren Alert Unit • Reflector Unit • Power Supply (2 x plug in) TEST EQUIPMENT & TOOLS • Reflected beam operation • Mains transformers supplied • Chime/siren operates when beam path broken • Beam length max 7m • Speaker volume adjustable or turned off • Siren time adjustable (3 to 30 secs) • Internal/External (IP55) sensor • Easy to set up EACH KIT CABLE PROTECTION APPLICATIONS Stand alone security kit, sounds when person crosses PIR beam path. Ideal for use in driveways/gardens, shops, restaurants, offices, factories, warehouses etc. INDUSTRIAL CONTROLS & THERMOSTATS O R D E R I N G D ATA W I R E L E S S E N T RY A L E RT K I T S Catalogue No. TIME CONTROLS EPRB/K FEATURES ALARMS IF SOMEONE MOVES THROUGH THE BEAM DISABLED Catalogue No. SECURITY ENTRY ALERT KITS SECURITY BEAM KITS PHOTOCELL BEAM KIT P900/N IDEAL FOR SECURITY BARRIERS LIGHTING COUNTING GATE CONTROL O R D E R I N G D ATA BEAM KITS Catalogue No. Description Units P900/N PRB/K 4PBK WBS/1RC WBSBB WBSRC each each each each each each Photocell Beam Kit Reflective Photocell Beam Kit Photocell Quad Beam Kit Wireless Strobe Light/Siren Battery Back-up for WBS/1RC Remote for WBS/1RC (additional) APPLICATIONS Photocell Beam Kits - Stand alone safety or security kit for a wide range of applications e.g. incorporated into intruder alarm, automatic gate openers or door entry systems. They detect people or objects moving across its path. TIME CONTROLS DISABLED SECURITY 28 REFLECTOR BEAM KIT LIGHTING CONTROLS TV AMPLIFIERS P900/N FEATURES COMMUNICATIONS IP66 WIRED OR WIRELESS APPLICATIONS 30m RANGE PHOTOBEAM FENCE 4PBK 700mm TALL WIRELESS 4BPK FEATURES • Quad beam operation virtually eliminates false alarms • Provides an infrared photobeam fence almost 700mm tall with a range of up to 30 metres • Wired or wireless operation • Internal or external use • Robust aluminium body • Voltage free output relay contacts • Wall/post mountable • Rotatable beams • 12V DC operation (plug in) 4BK KIT CONTAINS • Pair of beams • 2 x power supplies • Wireless TX PCB PRB/K FEATURES • 12V AC -240V AC or 12V DC - 240V DC • Only requires 1 photocell cabling connection • Reflected beam operation • Beam length max 14 metres • Internal/External use (IP66) • Easy to set up, large 80mm diameter reflector • Photocell pre-wired – 2m cable (extendable up to 100 metre) • Adjustable sensitivity and response • Voltage free changeover contacts (1A@240V AC) (3A @ 30V DC) • Optional 12V AC/DC sounder (RT27) - page 25 PRB/K EACH KIT CONTAINS • 1 Infrared Photocell • Reflector Unit • Mounting Brackets/Fixing Kit STROBE LIGHT/SIREN WBS/1RC FEATURES • Only for use with 4BPK when they are installed for wireless operation • Wireless operation • 3 selectable operating modes; Strobe light with alternating voice alarm and siren, strobe light with siren, strobe light with voice alarm • Alarm duration setting of 5 or 10 minutes • Remote control operation (supplied) • Internal or external use (IP65) • 12V DC operation • Battery back-up (optional) STROBE LIGHT/SIREN TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS 12V (24V) operation Beam length max 10m Voltage free changeover contacts (1A/24V) Easy to set up Internal/External use Optional 12V AC/DC sounder P900/N EACH KIT CONTAINS • 2 Infrared Photocells • 12V AC Transformer PRB/K INDUSTRIAL CONTROLS & THERMOSTATS CABLE PROTECTION • • • • • • WBS/1RC EACH KIT CONTAINS WBS/1RC • 12V DC power supply (plug in) • Strobe/siren assembly • Remote control IP65 TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] SECURITY 29 O R D E R I N G D ATA EEA EMERGENCY EQUIPMENT Catalogue No. Units SECURITY EMERGENCY EQUIPMENT - ALARMS AND CONTROLS 6200 Description Green Emergency Door Release - Deformable plastic Green Emergency Break Glass Door Release Replacement Glass 75 x 40mm with Vandal Resistant Protective Cover RP/YS Yellow Reset Call Point - (No Glass) 6531Y/RP/YS Yellow Reset Call Point with Vandal Resistant Protective Cover VRC/GS/ESBG/S Green Reset Call Point with Vandal Resistant Protective Cover each each each each each each H (mm) W (mm) D (mm) Units 6200 EEA 127 127 48 200mmDia x 65mm H each each TIME CONTROLS Catalogue No. Description Fire Extinguisher Alarm Emergency Exit Alarm DISABLED EDRS/2 ESBG/S ES/RG APPLICATIONS Ideal for use in public areas, shopping centres, factories, warehouses, prisons, detention centres etc. COMMUNICATIONS ESBG/S EDRS/2 INDUSTRIAL CONTROLS & THERMOSTATS 6531Y/RP/YS RP/YS CABLE PROTECTION TEST EQUIPMENT & TOOLS IDEAL FOR ENVIRONMENTS WHERE BROKEN GLASS COULD BE A HAZARD ie FOOD PRODUCTION SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS Resettable Emergency Door Release (EDRS/2) • Fitted with deformable plastic, no glass to break • Complies with risk assessment RA001, EN50133 and industry Codes of Practice • Loud 80db warning (selectable) buzzer plus red LED warning when Emergency Door Release activated. • Hinged clear flap to prevent accidental operation • Separate changeover contacts rated 4A@30VAC/DC • 12/24V DC 20mA operation • Simple key reset • Surface or flush mounting (flush box not supplied) • Easy recognition, tough green moulding • Allen screw to aid vandal resistance • Supplied with two reset keys and one hex wrench VRC/GS/ESBG/S LIGHTING CONTROLS Exit Alarm (EEA) • Self contained electronic door alarm • Key override facility • Highly visible stop sign discourages wrongful use • 75/95dB selectable output • Tough polycarbonate construction • Automatic alarm shut off after 30 sec or 180 sec • 12V DC or battery powered (PP3 supplied) • Fits virtually any type of door • Connect to building management • Silent alarm (to external monitoring point) option Fire Extinguisher Alarm (6200) • Highly visible stop sign discourages wrongful use • 95-98dB alarm when activated • Tough polycarbonate construction • 9V battery supplied • Alarm connects to extinguisher via a steel cable and seal (supplied) • Deactivation cable provided to allow for service by authorised personnel TV AMPLIFIERS Break Glass Door Release (ESBG/S) • Test facility • Can be surface or flush mounted (surface box supplied) • Replacement glass available • Safe retention of broken glass • Max. contact rating 3A • Available with a vandal resistant protective cover • 2 x Normally Closed/Normally Open circuits • Cover and switch kits ideal for use where accidental activations are likely to occur i.e. schools, shopping centres and other public areas Reset Call Point (RP/YS) • No Glass to break (uses deformable plastic) • Resettable after call - no need to change glass • Ideal for use in food environments, swimming and leisure centres, gas installations etc • Simple key to reset (supplied) • Normally open switch • Surface or flush mountable (surface box supplied) • Visible warning of activation by flag indicator • Cover and switch kits ideal for use where accidental activations are likely to occur i.e. schools, shopping centres and other public areas (VRC/GS/ESBG/S and 6531Y/RP/YS) SECURITY SECURITY 30 PROTECTIVE EQUIPMENT VANDAL RESISTANT O R D E R I N G D ATA TIME CONTROLS DISABLED VA N D A L R E S I S TA N T P R O T E C T I V E E Q U I P M E N T H (mm) W (mm) D (mm) Units VRC/RS Red Cover for Surface Fire Call point VRC/GS Green Cover for Surface Emergency Break Glass Call Point VRC/WS White Cover for Surface Call point 6531/Y Yellow Cover for Surface Reset Call point 9105 Thermostat/Controller Cover 190 118 67 each 190 190 210 127 118 118 137 140 67 67 78 76 each each each each APPLICATIONS For the protection of equipment in public areas, shopping centres, factories, warehouses, prisons, detention centres, etc. VRC/GS VRC/RS Catalogue No.Description FEATURES LIGHTING CONTROLS TV AMPLIFIERS Fire Call Point/Door Release Covers • Tough clear polycarbonate, virtually unbreakable • Fits new or existing equipment • Fits over flush or surface call points/switch plates • Depth 35mm (flush) or 67mm (surface) FEATURES Thermostat Cover (9105) • Tough clear polycarbonate, virtually unbreakable • Fits new or existing equipment • Will not affect operation of thermostat. Holes in frame allow air to circulate freely • Fitted with lock and 2 keys 6531/Y FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS VRC/WS SUPER TOUGH POLYCARBONATE 9105 SECURITY PRESSURE MAT KITS O R D E R I N G D ATA IDEAL FOR SHOP ENTRANCE SECURITY S E C U R I T Y P R E S S U R E M AT K I T S Catalogue No. Description Units PMAT SPMAT RT27 T4812 Pressure Mat 720 x 390mm Stair Pressure Mat 598 x 168mm AC/DC Extension Sounder Multivolt transformer each each each each PMAT APPLICATIONS A simple security device that raises an alert when someone enters. Ideal for use in shops, offices, factories, warehouses, hospitals, schools, nursing homes etc. When pressure is applied to the mat e.g. stepped on, a chime or light is activated. The mat can be concealed under a carpet, entrance mat or stair carpet. TRIGGERED BY WEIGHT SPMAT MAT PRODUCT SPECIFICATION IDEAL FOR STAIRS Operational Voltage: Contact Rating: Tails: Tamper Loop: 12-24V AC/DC 500mA@24V 100mm Normally closed DIMENSIONS FOR PMAT and SPMAT PMAT SPMAT 720 x 390mm 598 x 168mm TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] DISABLED 31 SECURITY ELECTRIC DOOR OPENING / CLOSING SYSTEMS O R D E R I N G D ATA ELECTRIC DOOR OPENING/CLOSING KITS Description Units ADO/KOI ADO/S/N EDL/DC Door Opening/Closing Kit Remote Control for ADO (spare) Electric Door Lock 12V DC each each each ADO/KOI A new encoder lets the ADO/KOI know the exact position of the door at all times which eliminates the requirement for a door stop. Double doors can be simply managed as being master/slave configuration, which will also control rebated doors. As well as the simplicity to install and the high performance of the ADO/KOI, there are numerous features which increase the flexibilty of the product. FEATURES • Heavy duty cycle • Easy install & set up • LCD display • Programming via internal buttons or transmitter • Inward or outward opening • Standby battery included • Accessories available for special order to help meet The Equality Act 2010 requirements • We can offer an BS EN16005 version (includes radar and door hinge covers) please contact for more details. FLOOR MATS OPENING DETECTOR CABLE PROTECTION SAFETY DETECTOR INDUSTRIAL CONTROLS & THERMOSTATS FOR INWARD/ OUTWARD OPENING DOORS COMMUNICATIONS • Push & Go / Pull & Go • Fire alarm input • Night / Day mode • Free open, auto-close • Speed, torque & velocity adjustment • Disabled entry mode • Electrolock pause timer • Wind-stop torque adjustment • Obstacle management • Heavy duty cycle • Easy install & set up • LCD display LIGHTING CONTROLS OPERATES WITH A WIDE CHOICE OF DEVICES TV AMPLIFIERS Suitable for light to heavy duty cycle applications The new ADO/KOI has many features which will enhance the whole experience of automating swing doors - from the LCD display to step-through installation and set up, to the integral pad to programme the parameters (this can also be completed via a handheld transmitter. TIME CONTROLS APPLICATIONS Will automatically open and close swing doors using a variety of activating mechanisms, e.g access control systems, PIR’s, photocells, push buttons etc. Ideal for use in offices, shops, public buildings and factories. Ideally suited for use by the elderly and disabled persons. The new ADO/KOI offers a high quality, high performance product to automate single and double swing doors. DISABLED Catalogue No. PHOTOCELLS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS REMOTE CONTROL OPERATION TEST EQUIPMENT & TOOLS PUSHBUTTON PRODUCTS FOR THE DISABLED DISABLED SECURITY 32 DOOR RELEASE SWITCHES O R D E R I N G D ATA LARGE 115mm DOOR RELEASE SWITCHES DPDR/S EASY TO USE PUSH ACTION TIME CONTROLS Units DPDR/N DPDR/S each each Disabled Persons Door Release Switch slimline Disabled Persons Door Release Switch 115mm dia - surface APPLICATIONS Specifically designed for disabled persons use. For use with access control systems. IP55 SUITABLE FOR DPDR/N Catalogue No. Description EXTERIOR/INTERIOR USE • • • • • DPDR/N and DPDR/S FEATURES Large easy to use push action • Max. contact rating 2A @ 12/24V AC/DC Brushed stainless steel front plate (DPDR/N) 3A @ 24V (DPDR/S) Vandal resistant • Two sizes available Tough surface mounting box (supplied) • DPDR/N - 112mm x 45mm Internal or external use • DPDR/S - 115mm diameter O R D E R I N G D ATA TV AMPLIFIERS DOOR RELEASE SWITCHES LIGHTING CONTROLS DPDRSP/S DPDRP/S and DPDRSP/S FEATURES Large easy to use push action Brushed stainless steel front plate Vandal resistant Tough surface mounting box (supplied) Internal use Complies to BS8300 • • • • Max. contact rating 2A @ 12/24V AC/DC Sizes available DPDRP/S - 115mm diameter DPDRSP/S - 85mm diameter BRUSHED STAINLESS STEEL PRESS FOR ASSISTANCE SWITCH FLUSH OR SURFACE O R D E R I N G D ATA BRUSHED STAINLESS STEEL PRESS FOR ASSISTANCE SWITCH MOUNTING INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS each each • • • • • • EASY TO USE PUSH ACTION PFAS RT27 Catalogue No. Description Units PFAS SMF RT27 T4812/N Press for Assistance Switch Surface Mounting Frame - 1 gang Sounder 12V AC/DC Multivolt Transformer each each each each APPLICATIONS For use with a suitable sounder & power supply in assisting with the requirements of the 2010 Equality Act regarding Accessibility for Disabled Persons. • • • • • FEATURES Brushed stainless steel front plate Vandal resistant Flush or surface mounting (flush box supplied) Easy to operate Max. contact rating 2A @ 12/24V AC/DC TOUCH FOR ASSISTANCE SWITCH O R D E R I N G D ATA EASY TO USE T O U C H F O R A S S I S TA N C E S W I T C H TOUCH ACTION TEST EQUIPMENT & TOOLS CABLE PROTECTION Units DPDRP/S Disabled Persons Door Release Switch 115mm dia - surface DPDRSP/S Disabled Persons Door Release Switch 85mm dia - surface DPDRP/S LARGE 115mm FUSES & GENERAL PRODUCTS Catalogue No. Description TAS/K with SMF Catalogue No. TAS/K SMF RT27 RT27 • • • • • • Description Touch for Assistance Kit Surface Mounting Frame - 1 gang Sounder 12V AC/DC Units each each each EACH KIT CONTAINS FEATURES Touch sensitive • Touch switch and flush mounting box Flush or surface mounting (flush box supplied) • 12V DC power supply (can be used Brushed stainless steel with sounders - see page 25) Internal or sheltered external use • Max contact rating Voltage free changeover contacts 2A @ 12/24V AC/DC Will work behind glass TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] PRODUCTS FOR THE DISABLED 33 BATTERY BACKUP OPTIONS O R D E R I N G D ATA DELUXE TOILET ALARM SYSTEM Description Units DIS1/C4A Toilet Alarm System ACCESSORIES each Description Units DIS1/C4A/CS DIS1/C4A/IND DIS1/C4A/RP DIS/RCPK DIS1/C4A/BAT DIS10/C4A/NP DIS1/C4A/NM Ceiling Pull Cord Switch Indicator Light/Sounder Reset Point/Sounder Replacement Cord/Pull Kit 9V Rechargeable Battery 10 Zone Network Panel Network Module each each each each each each each DIS1/C4A COMPLIES WITH BS8300 ONLY 2 CORES REQUIRED THROUGHOUT TV AMPLIFIERS LIGHTING CONTROLS APPLICATIONS Our range of disabled persons toilet alarms are a cost effective and reliable solution to calling for assistance in the event of an emergency. Suitable for use in nursing homes, retirement homes, commercial/public buildings and other areas. Integral relay as standard allows integration of the alarm into intruder alarm, call systems etc and can switch external components e.g. strobes, sounders, lights etc. FEATURES • Integral relay contacts for adding other • 2 wire installation devices, e.g. lights, sounders or add into • Fits standard wall boxes for flush or building management system (volt free) surface fitting 1A max • Adjustable sounder in over-door panel • Delay on pull cord to minimise • Battery backup options (9V) false/accidental activation Use with rechargeable, (DIS1/C4A/BAT) • Reset button gives visual and audible or an alkaline (connection supplied) or indication on activation without battery back-up • Expandable - use single or group • BS83000:2009 + A1:2010 compliant together facility (max 10) • Fault and Mains indicators EACH KIT CONTAINS TIME CONTROLS Catalogue No. DISABLED Catalogue No. SECURITY DELUXE TOILET ALARM SYSTEM (DIS1/C4A) COMMUNICATIONS DIS10/C4A/NP • Alarm Controller/Power Supply • Indicator Light/Sounder (for staffed area) • Reset Call Point/Sounder • Disabled Toilet Door Stickers • Ceiling Pull Cord Switch • Additional switches/indicator lights etc, available NETWORKING Note: 1 network panel (DIS10/C4A/NP) per system and a network module (DIS1/C4A/NM) for each alarm panel required (max of10). ACCESSORIES FOR DIS/1/N Description Units DIS/CS/N DIS/OL/N DIS/RP/N DIS/RCPK DTA/RBK Ceiling Pull Cord Switch Overdoor Light/Sounder Reset Point/Sounder Replacement Cord/Pull Kit Replacement Battery Kit (DIS1/N) each each each each each DIS/CS/N DIS/RP/N DIS/OL/N CABLE PROTECTION HIGH VISIBILITY TOILET ALARM SYSTEMS (TWO WIRE) O R D E R I N G D ATA BRUSHED STAINLESS STEEL PUSH FOR ASSISTANCE SWITCH Description Units DDA/CALL/N DDA/CPT DDA/PC DDA/SLI Disabled Toilet Kit (Call Point) Call Point (Pulsing LED) Pull Cord Switch (LED) Substation Indicator each each each each EACH KIT CONTAINS • • • • • • Alarm Controller/Power Supply Overdoor Light/Sounder Call Point Reset Call Point Disabled Toilet Alarm Stickers Pull Cord Switch DESIGNED FOR THE PARTIALLY SIGHTED SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS APPLICATIONS Specifically designed for the partially sighted. A cost effective and reliable solution to calling for assistance in the event of an emergency. Suitable for use in nursing and retirement homes, commercial/public buildings, hotels, guest houses and other areas. • Only 2 wire cable required throughout • High intensity blue LEDs used throughout (to aid location) • High visibility printing on fascias • Rechargeable battery facility • Complies with BS 8300, Care Standards Act (2002), English Tourism Councils: National Accessability Scheme • Additional accessories available to enhance system • Braille lettering incorporated on front plates TEST EQUIPMENT & TOOLS Catalogue No. INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. PRODUCTS FOR THE DISABLED 34 SECURITY INDUCTION LOOP AMPLIFIER SYSTEMS FAST & SIMPLE TO USE ET30EC TIME CONTROLS DISABLED SUITABLE FOR INTERVIEW ROOMS, COUNTERS ETC. IL-TEST FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS PLS O R D E R I N G D ATA O R D E R I N G D ATA P O R TA B L E A M P L I F I E R COUNTER/ROOM KITS Catalogue No. Description Units Catalogue No. Description Units PLS Portable Loop System each ET30EC Counter Kit (Standard) each APPLICATIONS Companies are required by the 2010 Equality Act, to provide Induction Loop Systems where necessary. Induction Loop Systems are designed specifically to help hearing impaired people by providing audio coverage directly into hearing aids fitted with Telecoil T switch position. Ideal for use in shops, banks, post offices, restaurants, petrol stations, leisure centres, nursing homes etc. PORTABLE SYSTEM FEATURES • Stand alone self contained fully operational unit with integral microphone and induction coil • 1.2m2 effective area • External loop socket • External microphone socket • Mains rechargeable battery operation • Up to 4hrs battery back up in use • Low battery warning light • Complies with BS EN 60118-4 PRODUCT SPECIFICATION • • • • • • • • • Provides Audio coverage direct into hearing aids, fitted with Telecoil T switch position Counter Kits cover a 1 to 2m dia. Complies with BS 7594 and BS 5839/4 Standards Wall mounted Electret Microphone input provided, which can be used for TV or conferencing. Tamper resistant “mix control” Control adjustment from front panel LED indicators for input signal and loop currents Induction Loop sticker provided EACH KIT CONTAINS O R D E R I N G D ATA UNIVERSAL TESTER Catalogue No. Description Units IL-TEST Universal Induction Loop Tester each • Amplifier/Power Supply • Induction Loop Counter Coil • Mains lead with 13A plug • Tie Clip /Counter microphone • Induction loop sticker The 2010 Equality Act requires that Induction Loop systems are regularly checked to ensure correct operation. The tester allows the user/installer to check that the system is operating correctly and adjust levels if required. FEATURES • • • • • Indicates Induction loop is active and audible signal of field strength is present LED indication of field strength level (3 LEDs) Simple to use Battery operated (2 x CR927 button cells supplied) Gives approximately 1000 tests per set of batteries TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] TIME CONTROLS 35 O R D E R I N G D ATA I M M E R S I O N H E AT E R A N D I N D U S T R I A L T I M E S W I T C H E S Description Units IMM24 IMM24EC IMM24F 16.1A - 24 hour - with Surface Mounting Box 16.1A - 24 hour - with Surface Mounting Box 13A - 24 hour - flush each each each IMM24 3500 W IMMERSION HEATER TIMESWITCH 1200 VA VA 2000 VA VA 3000 W 1000 VA VA 900 VA VA IMM24 200 VA VA IMM24/F 2500 W 1200 VA VA 2000 VA VA 2500 W 1000 VA VA 900 VA VA IMM24F 200 VA VA 16.1 AMP RESISTIVE 4 AMP INDUCTIVE IMMM24/EC 3500 W 1200 VA VA 2000 VA VA APPROVED 3000 W 1000 VA VA 200 VA VA CABLE PROTECTION PLUG-IN TIMESWITCHES O R D E R I N G D ATA APT24 Catalogue No. Description Units APT24 each Analogue 24 hour Plug-in Timeswitch SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS • Continuous (manual) operation facility • Minimum 15 minute switching interval • Red indicator light illuminates when output is ON • Fixed tappets ANALOGUE 24HR ON/OFF SWITCHING, 15 MINUTE SWITCHING INTERVALS TEST EQUIPMENT & TOOLS APPLICATIONS For use in homes, offices and shops etc for the programmed control of plug-in lighting, heaters, fans, radios and coffee machines. FEATURES INDUSTRIAL CONTROLS & THERMOSTATS 900 VA VA IMM24EC PLUG-IN TIMESWITCHES COMMUNICATIONS • Compact dimensions. • Tappet “time” selectors. Fast, easy fingertip control. • No loose pins. • 24 hour. Is the convenience of repeating a cycle daily. • ON/OFF slider switch. Fingertip control. LIGHTING CONTROLS FEATURES IMMERSION HEATER TIMESWITCH • 24 hour ON/OFF switching • Up to 96 ON/OFF switching operations per day • Maximum load 3200W TV AMPLIFIERS 13 AMP RESISTIVE 4 AMP INDUCTIVE TIME CONTROLS IMM24F Is available for situations where flush fitting is required. Twenty-four hour models can be set from 30 minutes to 23.5 hours in 30 minute increments, with the pre-set cycle being repeated daily. All above IMM models feature an indicator light which confirms that the timeswitch is passing a supply to the appliance. IMM24 This model has been specifically developed to cope with the constantly high Mains connection is straightforward with all surface models providing knock-outs amperage draw found with immersion and cable clamps. Terminals, which can heaters and also the wide variety of domestic or industrial timed operations. The accommodate two 1.5mm conductors are provided. tappets are in 30 minute increments. IMM24EC The latest design of high current timeswitch incorporating a rotary ON/CLOCK/OFF control offering permanent ON or OFF or timed operation. This cost effective compact timeswitch is ideal for use with immersion heaters or other high current domestic, commercial or industrial applications. Tappets are in 30 minute increments and IMM24EC is supplied with a purpose designed surface mounting box. IMM24 and IMM24EC are supplied with surface mounting box containing 2 x cable clamps. 16.1 AMP RESISTIVE 4 AMP INDUCTIVE APPROVED PRODUCT SPECIFICATION With electrical and mechanical componentry housed within an impact resistant housing, these timeswitches feature timer dials with easy to set tappets. These activate switching at pre-set times. A slider switch allows the unit to be set for continuously ON/OFF in addition to the program setting. THE ORIGINAL & GENUINE BEWARE OF IMITATIONS DISABLED Catalogue No. SECURITY IMMERSION HEATER/LIGHTING TIMESWITCHES TIME CONTROLS SECURITY 36 SOLAR TIMESWITCHES (WITH BLUETOOTH SETUP) O R D E R I N G D ATA SOLAR TIMESWITCHES ASTRO NOVA CITY Catalogue No. TIME CONTROLS DISABLED EASY SET-UP CITY SELECTION FEATURE AUTOMATICALLY SETS FOR DAWN & DUSK ASTRO NOV NOVA VA A CIT CITY TY TV AMPLIFIERS 3000 W 1200 VA VA ASTRO NOVA CITY SHOWN IN ENC1 2000 VA VA 3000 W 600 VA VA LIGHTING CONTROLS 400 VA VA COMMUNICATIONS Units each each each FEATURES APPLICATIONS BLUETOOTH DONGLE 90 VA VA TECHNICAL SPECIFICATION Catalogue No. Battery back-up Switch Operation Switching Capacity Power Supply ASTRO NOVA CITY 10 years 22 Description ASTRO NOVA CITY 7 Day/All Year 230V AC ENC1 Enclosure BLUETOOTH DONGLE Dongle 16(10) A 230V Ideal for controlling lighting (security/signage • Operates as standard timeswitch with etc) where control based around dusk and dawn or without dawn/dusk switching for part night control or part of the night is required. The internal electronics track and automatically • Automatically adjusts for dawn/dusk adjust for local dawn/dusk times throughout the variation (electronically) over the years year(s) and with each day of the week being • Accurate dawn/dusk settings - set by local city individually programmable it gives accurate and • Automatic summer/winter time correction cost effective control throughout the year. • Twin timer controlled circuits - voltage free ENCLOSURE • 2 modules wide Enables the use of Orbis modular units to be • DIN rail mounting used where it is impractical to build them into • 10 year battery life • Volt free changeover contacts panels/distribution units. BLUETOOTH DONGLE APPLICATIONS Communications Bluetooth Dongle for ASTRO NOVA CITY which allows for programming and controlling the device from an Android or iPhone App. FEATURES The Bluetooth Dongle is used in combination with the ORBIS ASTRO NOVA application (Apple and Android), being compatible with Bluetooth Smart ready devices. • Apple (iphone 4S or above, iPad3 or above) • Android (version 4.3 or above and devices compatible with Bluetooth 4.0 LE) This application performs the following functions: • Reading the data of an ASTRO NOVA CITY/DATA LOG 1-2 to store or send to another device • Creating different profiles (settings) from scratch or based on the data captured ASTRO NOVA CITY/DATA LOG 1-2 . • Sending one or several ASTRO NOVA CITY/DATA LOG 1-2 profiles • Displaying operation statistics (monthly and annual switching times) • Carrying out energy saving and billing estimation studies. STAIRCASE LIGHTSWITCH - TIME LAG CONTROLLER O R D E R I N G D ATA S TA I R C A S E L I G H T S W I T C H T I M E L A G C O N T R O L L E R INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION MICROTEMP T-16G T -16G T-22 T -22 2000W 3000W 800VA 800V VA 1200VA 1200V VA 1200 V VA A VA 2000 V A 2000W 3000W 750VA 750V VA 1000VA 1000V VA 700VA 700V VA 900VA 900V VA 100VA 100V VA 100VA 100V VA Description Units T16G Staircase Lightswitch each T22 Staircase Lightswitch each MICROTEMP Staircase Lightswitch each ENC1 Enclosure each Other models and voltages can be supplied on request. APPLICATIONS An energy saving device used to turn off lighting after a preset delay in corridors and staircases etc in hotels, apartment blocks, factories and warehouses. T16/T22 SPECIFICATION MICROTEMP SPECIFICATION Small size (40x40x14mm) • DIN rail mounted single module units No neutral required • Synchronous motor Suitable for any push button switch • Time delay setting 3-30 mins (T16G), Use with Incandescent or Halogen lamps 45 secs - 7 mins (T22) • Manual selector for permanent on and automatic • 10 Amp rating (T16G) - 16 Amp rating (T22) • Voltfree contacts T16G T E C H N I C A L S P E C I F I C AT I O N T22 Catalogue No. T16G T22 MICROTEMP Time Switching Capacity Power Supply 3 - 30 minutes 45 sec - 7 minutes 30 sec - 10 minutes 10(2.5)A 16A 400W 230V 230V 230V TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] TIME CONTROLS 37 SECURITY DIGITAL TIMESWITCHES O R D E R I N G D ATA D I G I TA L T I M E S W I T C H E S Description Units DATA LOG/1 DATA LOG/2 DATA MICRO/PLUS DATA MICRO/2 DATA MICRO/2/12 MINI T LOG ENC1 BLUETOOTH DONGLE 16A - 24 Hour/7 Day 16A - 24 Hour/7 Day 16A - 24 Hour/7 Day 16A - 24 Hour/7 Day 16A - 24 Hour/7 Day 16A - 24 Hour/7 Day Enclosure Dongle each each each each each each each each 4 YEAR BATTERY BACK-UP DISABLED Catalogue No. Other models and voltages can be supplied on request. TIME CONTROLS APPLICATIONS The sizes of these timeswitches are suitable for most consumer units and ideal for use by panel builders. Suitable for multiple functions linked to accuracy. DATA LOG & MINI T LOG P R O D U C T S P E C I F I C AT I O N Offer 1 or 2 circuit switching • Volt free changeover contacts • Timed pulse 1-59 secs In-built battery • Surface or DIN rail mountable (MINI T Innovative and simple programming 24 Hr/Day, with holiday period override LOG) • Bluetooth Dongle compatible (DATA Automatic BST/GMT time correction LOG 1-2). See page 36 Large display (DATA LOG) DATA MICRO/PLUS TV AMPLIFIERS • • • • • • BLUETOOTH DONGLE APPLICATIONS Communications Bluetooth Dongle for ASTRO NOVA CITY which allows for programming and controlling the device from an Android or iPhone App. LIGHTING CONTROLS T E C H N I C A L S P E C I F I C AT I O N Circuits Switching operations Battery back-up Switching capacity Power supply DATA LOG/1-2 MINI T LOG 1 or 2 1 50 50 5 years 5 years 16(10)A 16(4)A 230V 230V DATA MICRO RANGE are two module DIN rail or surface mounting digital timeswitches (for surface mounting use Enclosure). • Manual switching. • Volt free changeover contacts • Timed pulse 1-59 secs • Single or twin circuit • Up to 24 operations • Daily and weekly programme Catalogue No. ‘TIMED PULSE TOR SCHOOL BELLS etc’ INDUSTRIAL CONTROLS & THERMOSTATS T E C H N I C A L S P E C I F I C AT I O N BLUETOOTH DONGLE Circuits Memory Parts Battery back-up Switching Capacity Power Supply DATA MICRO/PLUS 1 DATA MICRO/2 2 DATA MICRO/2/12 2 32 32 32 4 years 4 years 4 years 230V 230V 12V AC/DC DATA MINI T CABLE PROTECTION DATA 16(10)A 16(10)A 16(10)A DA TA MICRO+ MICRO+DA DATA LOG TALOG LOG MINI T LOG DATA 3000 W 3000 W Fluorescent tubes 1200 VA VA 1200 V VA A 1200V VA 1200VA Low voltage halogen (12V AC) 2000 VA VA 2000 V VA A 2000 VA VA Halogen (230V AC) 3000 W 3000 W 3000 W 600 V VA A 600 VA VA 1000V VA 1000VA 400 V VA A 400 VA VA 900V VA 900VA 90 V VA A 90 V VA A 200V VA 200VA Low consumption lamps (CFL) Low consumption lamps (Downlights) LED lamps MINI T LOG SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS 3000 W TEST EQUIPMENT & TOOLS Incandescent lamps COMMUNICATIONS DATA LOG DATA MICRO PRODUCT SPECIFICATION TIME CONTROLS ANALOGUE TIMESWITCHES O R D E R I N G D ATA MODULAR TIMESWITCHES - DIN RAIL DISABLED SECURITY 38 Catalogue No. Description UNO/D UNO/QRD INCA/DUO/D INCA/DUO/QRD ENC1 16A - 24 Hour 16A - 24 Hour/Battery back-up 16A - 24 Hour 16A - 24 Hour/Battery back-up Enclosure nits each each each each each Other models and voltages can be supplied on request. APPLICATIONS The sizes of these timeswitches are suitable for most consumer units and ideal for use by panel builders. TIME CONTROLS UNO RANGE UNO INCA 2500 W TV AMPLIFIERS 1200 VA VA 2000 VA VA 2500 W 1000 VA VA 900 VA VA 3000 W 1200 VA VA 2000 VA VA TECHNICAL SPECIFICATION 3000 W Catalogue No. 1000 VA VA CABLE PROTECTION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS Switch Operation Module Width Battery back-up Switching Capacity Power Supply UNO/D UNO/QRD INCA/DUO/D INCA/DUO/QRD 900 VA VA 100 VA VA 96 on/off 96 on/off 48 on/off 48 on/off 1 1 2 2 No 150Hrs No 100Hrs 16(4)A 16(4)A 16(4)A 16(4)A 230V 230V 230V 230V ENERGY MEASUREMENT METERS ACCURATELY MEASURES ELECTRICITY CONSUMPTION O R D E R I N G D ATA ANALOGUE ENERGY METERS Catalogue No. Description Units 2511SO 6511SO ENC1 each each each 25A Energy Meter 65A Energy Meter Surface Mounting Enclosure APPLICATIONS Allows simple sub-metering of a wide variety of applications, to measure electricity consumption and create energy usage awareness. Ideal for use on camp sites, caravan and mobile home parks, student flats, house conversions and temporary installations and a wide range of industrial applications. INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS 100 VA VA INCA RANGE PRODUCT SPECIFICATION Models have volt free contacts INCA/DUO/D (24 hour) & UNO/D (24 hour) & UNO/QRD INCA/DUO/QRD (24 hour) are two (24 hour) are single module wide 96 module wide 48 operations, fixed tappets, operations, fixed tappets, manual transparent cover, DIN rail or surface override, three positions (permanent, mounting. (For surface mounting use ON/OFF and automatic) sealable enclosure). transparent cover. Easily removable battery. DIN rail or surface mounting. (For surface mounting use enclosure). ANALOGUE FEATURES • • • • 25A 65A 25A 32A 65A 2511SO 6511SO D2221 D3221 D6521 Catalogue No. Power supply Current rating Modular width Temp range TECHNICAL SPECIFICATION 2511SO 6511SO D2221 D3221 230V AC 50Hz 230V AC 50Hz 230V AC 230V AC 25 Amps 65 Amps 10(22.5)A 5(32)A 1 module 2 modules 2 modules 2 modules -200C to +500C -200C to +500C -200C to +500C -200C to +500C D6521 230V AC 10(65)A 2 modules -200C to +500C Accurate Kilowatt hour measurement 25 and 65 Amp ratings Modular construction Accuracy Class 1 (UNE-EN62053-21) • DIN rail or surface mounting in separate enclosures (ENC1) • 5 digit + 1 decimal point numerical KWh indication O R D E R I N G D ATA D I G I TA L E N E R G Y M E T E R S Catalogue No. Description Units D2221 D3221 D6521 ENC1 each each each each 22A Digital Energy Meter 32A Digital Energy Meter 65A Digital Energy Meter Surface Mounting Enclosure DIGITAL FEATURES IDEAL FOR USE ON CAMP SITES, IN STUDENT ACCOMODATION, FLAT CONVERSIONS ETC. • Backlit LCD display • 6 digital display +1 decimal point digital KWA indication • Partial reset to 0 (D2221 only) facility (tripmeter) • Accuracy class 2 EN 62053-21 (D2221) • Accuracy class 1 EN 62053-31 (D3221 and D6521) • LED consumption meter indication • Power indicator (D2221) • Min operating load 0.25A (D2221 and D3221) 0.5A (D6521) TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] TIME CONTROLS 39 SECURITY COMMERCIAL TIMESWITCHES O R D E R I N G D ATA COMMERCIAL TIMESWITCH Catalogue No. Description Units DUO/N 16A - 24 Hour Commercial Timeswitch each COMMERCIAL TIMESWITCHES Description Units ALPHA/D ALPHA/QRD ALPHA/S ALPHA/QRS ALPHA/QRD/1 ALPHA/QRS/1 ALPHA/QRD/12VAC ALPHA/QRD/12VDC ALPHA/QRS/24VAC ALPHA/QRD/24VAC 16A - 24 Hour (230V AC) 16A - 24 Hour/Battery back-up (230V AC) 16A - 7 Day (230V AC) 16A - 7 Day/Battery back-up (230V AC) 16A - 24 Hour/Battery back-up (120V AC) 16A - 7 Day/Battery back-up (120V AC) 16A - 24 Hour/Battery back-up (12V AC) 16A - 24 Hour/Battery back-up (12V DC) 16A - 7 Day/Battery back-up (24V AC) 16A - 24 Hour/Battery back-up (24VAC) each each each each each each each each each each CONTROL FOR COMMERCIAL PREMISES DUO/N Other models and voltages can be supplied on request. • • • • • • • Surface or DIN mounting Surface, panel or DIN mounting • 1⁄4 hour switching intervals ⁄2 hour switching intervals (D & QRD) • Security sealable 2 hour switching intervals (S & QRS) • 16A resistive 4A inductive Fixed tappets • Voltage free changeover contacts Voltage free changeover contacts Auto or manual ON/OFF operation TECHNICAL SPECIFICATION 1 Switch Operation Module WidthBattery back-up Switching Capacity Power Supply DUO/N 96 ON/OFF Catalogue No. Switch Operation Size (mm) Battery back-up Switching Capacity Power Supply 68 x 68 68 x 68 68 x 68 68 x 68 72 x 96 72 x 96 72 x 96 72 x 96 72 x 96 72 x 96 No 100Hrs No 100Hrs 100Hrs 100Hrs 100Hrs 100Hrs 100Hrs 100Hrs 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A 16(4)A ALPHA RANGE 230V 230V 230V 230V 230V 120V AC 120V AC 12V AC 12V DC 24V AC 24V AC 3000 W 1200 VA VA 1200 VA VA 2000 VA VA 2000 VA VA 2000 W 3000 W 900 VA VA 1000 VA VA 900 VA VA 900 VA VA 100 VA VA 200 VA VA COMMUNICATIONS ALPHA/D 96 ON/OFF ALPHA/QRD 96 ON/OFF ALPHA/S 84 ON/OFF ALPHA/QRS 84 ON/OFF ALPHA/QRD/1 96 ON/OFF ALPHA/QRS/1 84 ON/OFF ALPHA/QRD/12VAC 96 ON/OFF ALPHA/QRD/12VDC 96 ON/OFF ALPHA/QRS/24VAC 84 ON/OFF ALPHA/QRD/24VAC 96 ON/OFF 100Hrs 2000 W SUPRA RANGE nits each each each each each APPLICATIONS The sizes of these timeswitches are suitable for most consumer units and ideal for use by panel builders. PRODUCT SPECIFICATION automatic on/off. DIN rail mounting. Easily removed battery. CRONO/QRDD Two separate circuits. DIN rail or surface mounting 24 hr timer TECHNICAL SPECIFICATION Catalogue No. Switch Operation Module Width Battery back-up Switching Capacity Power Supply 2.5 2.5 2.5 4 No 150Hrs 150Hrs 100Hrs 16(4)A 16(4)A 16(4)A 2x16(4)A 230V 230V 230V 230V 3000 W 3000 W 500VA 500V VA 1200 VA VA 2250 VA VA 2000 VA VA 3000 W 3000 W 500VA 500V VA 1000 VA VA - 900 VA VA - 200 VA VA SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS SUPRA/D 96 on/off SUPRA/QRD 96 on/off SUPRA/QRS 96 on/off CRONO/QRDD 96/48 on/off CRONO/QRDD SUPRA TEST EQUIPMENT & TOOLS SUPRA/D (24 hour) SUPRA/QRD (24 hour) SUPRA/QRS (weekly). Have forward facing dials, manual knob for time setting, manual override 3 positions: Permanent on, permanent off, CRONO CABLE PROTECTION Description SUPRA/D 16A - 24 Hour SUPRA/QRD 16A - 24 Hour/Battery back-up SUPRA/QRS 16A - Weekly/Battery back-up CRONO/QRDD 2x16A - 24 Hour/battery back-up ENC1 Enclosure Other models and voltages can be supplied on request. INDUSTRIAL CONTROLS & THERMOSTATS O R D E R I N G D ATA MODULAR TIMESWITCHES - DIN RAIL Catalogue No. LIGHTING CONTROLS Catalogue No. 3 DUO / N (MINI) ALPHA TV AMPLIFIERS DUO/N FEATURES ALPHA FEATURES IDEAL FOR TRADESMANS TIMING TIME CONTROLS Catalogue No. DISABLED O R D E R I N G D ATA SAFE AND SECURE SECURITY 40 TIME CONTROLS RADIO CONTROLLED COMMERCIAL CLOCKS O R D E R I N G D ATA DISABLED RADIO CONTROLLED COMMERCIAL CLOCKS Catalogue No. Description Surround Colour Units CO10/AL/RC CO10/AL/RCM CO100W/RC CO125W/RCM 250mm 12hr Dia R-Controlled 225mm 12/24hr Dia R-Controlled 260mm 24hr Dia R-Controlled 300mm 24hr Dia R-Controlled Brushed Metal Brushed Metal White White Metal Case each each each each LIGHTING CONTROLS TV AMPLIFIERS TIME CONTROLS FEATURES CO10/AL/RC (250mm) CO100W/RC (260mm) • Radio-controlled versions for increased accuracy and automatic summer/ wintertime setting. Accurate to one second in a million by receiving the precise time signal from Cumbria. • Clear display • Sweep second hand • Battery Operated (1 x AA, not supplied) • ACCTIM models, your assurance of quality and reliability CO125W/RCM (300mm) CO10/AL/RCM (225mm) COMMERCIAL CLOCKS O R D E R I N G D ATA COMMUNICATIONS COMMERCIAL CLOCKS Description Surround Colour Units C09W/N CO10/WN CO12W/N CO12B/N CO145W/N 225mm 24hr Dia Quartz 225mm 24hr Dia Quartz 300mm 24hr Dia Quartz 300mm 24hr Dia Quartz 355mm 24hr Dia Quartz White White White Black White each each each each each FEATURES • Battery operated (1 x AA, not supplied) • ACCTIM models, your assurance of quality and reliability • Sweep second hand • Clear display • Quartz movement CO12W/N (300mm) FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS CO9W/N (225mm) Catalogue No. CO145W/N (355mm) CO12B/N (300mm) CO10/WN (300mm) TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] AMPLIFIERS / DISTRIBUTION 41 SECURITY DISTRIBUTION AMPLIFIERS (WIDE BAND) O R D E R I N G D ATA D I G I TA L T V D I S T R I B U T I O N A M P L I F I E R S ( W I D E B A N D ) Description Units 1 in 2 out 1 in 4 out each each EYE/D EBP/D A C C E S S O R I E S F O R D I G I TA L S Y S T E M S Digieye Remote Control Sender Bypass Kit Required for SIG2 and 4 with EYE/D DISABLED Catalogue No. SIG2 SIG4 each each DISTRIBUTE TIME CONTROLS DIGITAL TV AROUND DIFFERENT ROOMS SIG4 • Simple to install • Suitable for distribution of signals for digital TV, satellite TV, terrestrial TV and FM radio. LIGHTING CONTROLS REMOTE CONTROL SIGNAL SENDER FEATURES TV AMPLIFIERS APPLICATIONS The SIG range of distribution amplifiers allow EYE/D Enables you to remotely operate you to distribute TV or radio signals around a your digital satellite receiver from 1 or more building. They are compatible with aerials or auxiliary points around your home etc. by sending signals down the co-axial cable back the RF OUT 2 signals found on UK digital to the RF-OUT 2 on your satellite receiver box satellite receivers. i.e. changes channel. It is fully compatible It is also possible to control the functions of with UK digital satellite receivers featuring an the satellite receiver from secondary locations RF-OUT 2 output by using the receivers remote control and a *Note: Remote controls must operate within Digieye (EYE/D). 30-40KHz range. Note: Bypass kit EBP/D is required on SIG 2 and 4 if using on EYE/D. SIG2 TECHNICAL SPECIFICATION SIG2 SIG4 Average gain per outlet Wideband UHF, VHF, FM Wideband UHF, VHF, FM COMMUNICATIONS Catalogue Frequency Number. 16dB 16dB EYE/D Voltage 230V AC 50Hz INDUSTRIAL CONTROLS & THERMOSTATS CAT 5E PATCH PANELS O R D E R I N G D ATA C AT 5 E P AT C H P A N E L S Description Units PP24 PP48 1 in 2 out 1 in 4 out each each Catalogue No. Description Units IDC/M IDC Metal Insertion Tool each CABLE PROTECTION Catalogue No. ACCESSORIES FEATURES SEE CAT5E CABLES ON PAGE 44 Cat 5e performance Fits industry standard 19” equipment cabinets and racks Labelling windows for easy port identification Arrow style cable management (removable) for tidy routing and dressing of cables Can be used with LSA and 110 punch tool IDC/M SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS • • • • • TEST EQUIPMENT & TOOLS APPLICATIONS For use in standard 19” equipment cabinets and racks in offices, factories etc AMPLIFIERS/DISTRIBUTION SECURITY 42 DISTRIBUTION SYSTEMS AER/UHF/N DISABLED RECEIVES ALL TV SIGNALS 10 ELEMENTS TIME CONTROLS LOFT/4 THE ULTIMATE TV AMPLIFIERS IN VIEWING DISTRIBUTION 32 ELEMENTS LOFT/8 LIGHTING CONTROLS AER/UHF/32 TYPICAL INSTALLATION O R D E R I N G D ATA COMMUNICATIONS D I G I TA L T V D I S T R I B U T I O N S Y S T E M S Catalogue No. Description Units LOFT/4 LOFT/8 CFP1 EYE/D 4 Way Control Box 8 Way Control Box F Type Co-Axial Plug RG6 Digieye Remote Control Sender each each (10) pack each APPLICATIONS INDUSTRIAL CONTROLS & THERMOSTATS A fully integrated TV, Video, Satellite, Radio and CCTV distribution system. Ideal for use in domestic, commercial and industrial installations such as guest houses, hotels, nursing homes, blocks of flats etc. System is approved for use with Sky systems. LOFTBOX (Master Control Box/Amplifier) Combines up to 6 inputs (SATELLITE, UHF, and DIGITAL TV, FM, DAB and CCTV) into one single downlead output per TV. Accepts a return feed from TV/Sky digibox (UHF2). 4 and 8 output models available (6dB gain for each TV). Note: TV Modulator required for each camera. CABLE PROTECTION EYE/D Enables you to remotely operate your digital satellite receiver from 1 or more auxiliary points around your home etc. by sending signals down the co-axial cable back to the RF-OUT 2 on your satellite receiver box i.e. changes channel. It is fully compatible with UK digital satellite receivers featuring an RF-OUT 2 output. *Note: Remote controls must operate within 30-40KHz range. FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS AERIAL KITS FEATURES PRODUCT SPECIFICATION • Choice of 2 aerials for either strong or medium strength signal areas • Suitable for receiving Freeview and other digital signals • Kits complete with 10 metres of co-axial cable AER/UHF/32 - 32 element aerial kit AER/UHF/N - 10 element aerial kit, The aerial kits contain all the components required including aerial, mounting arm, heavy duty mounting bracket, 10 metres of screened co-axial cable, co-axial plug and cable clips. Suitable for loft or wall mounting (mounting kit supplied). O R D E R I N G D ATA A E R I A L K I T S F O R D I G I TA L T V R E C E P T I O N Catalogue No. Description Units AER/UHF/N AER/UHF/32 10 Element Aerial Kit 32 Element Aerial Kit each each TERRESTRIAL APPLICATIONS Residential locations where television reception is desired TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] AMPLIFIERS / DISTRIBUTION 43 SECURITY TV & DATA DISTRIBUTION SYSTEMS & CO-AXIAL ACCESSORIES FAS3/SH CFP1 DISABLED MFP FAS2/2CF IDC/M MOD/BT MOD/UHF LIGHTING CONTROLS O R D E R I N G D ATA TV AMPLIFIERS MOD/RJ45 YS2 FAS2/CF LJ2 SERIES O R D E R I N G D ATA PLUGS - SOCKETS - F TYPE CONNECTORS Male and Female Plugs, Line Connectors. D I G I TA L T V D I S T R I B U T I O N S Y S T E M S Description Units Units FAS3/SH each each each Shielded Triple Co-axial Socket ACCESSORIES each MCP MFP CFP1 Catalogue No. Description Units MOD/BT MOD/UHF MOD/RJ45 BT Socket (FAS3/SH) UHF Socket (FAS3/SH) RJ45 Socket (FAS/SH) each each each MOD/BT and MOD/RJ45 are terminated via a pinch down tool, IDC/M or similar. O R D E R I N G D ATA AERIAL SPLITTERS Description Units YS2 1 In, 2 Out. each O R D E R I N G D ATA T E L E P H O N E A N D D ATA S O C K E T S O R D E R I N G D ATA CO-AXIAL SOCKETS - FLUSH - SURFACE The range of white plastic Co-Ax Sockets has screw terminals. Flush socket plates are available with either Co-axial or F type sockets and are designed to fit standard electrical back boxes. Description Units FAS2/CF FAS2/2CF Twin 1 x F Type & 1 x Co-axial socket. Twin F Type socket each each Size (mm) Units LJ2/4A LJ2/6A Single Surface Master Screw Single Surface Extension Screw 68 x 68 68 x 68 each each Catalogue No. Description Units IDC/M IDC Metal Insertion Tool each TELEPHONE ACCESSORIES Telephone sockets are approved to a British Telecom design to present a common interface for telephone instruments and other subscriber apparatus incorporating 4 or 6 way line plugs. Wiring connections are via screw terminals. This is an ideal wall plate for Sky or Sky+ installations. TEST EQUIPMENT & TOOLS APPLICATIONS This shielded Co-axial socket can be used with the loftbox TV distribution system or on its own. FAS3/SH allows the installer to customise the installation using the MOD modules. FAS3/SH Shielded TV, FM, SAT-OUT & RF-OUT 2 socket plate is supplied with a telephone socket and blanking plate. They can be replaced with either a further telephone socket (MOD/BT), an RJ45 socket (MOD/RJ45) or a UHF socket (MOD/UHF). Description CABLE PROTECTION Catalogue No. Catalogue No. INDUSTRIAL CONTROLS & THERMOSTATS Catalogue No. COMMUNICATIONS Catalogue No. Catalogue No. Description Chrome. Co-axial Female Plug F Type Co-axial Plug RG6 TIME CONTROLS CREATE YOUR OWN TV DISTIBUTION SYSTEM WITH THESE MODULAR ACCESSORIES MCP The FAS3/SH requires a 2 gang box. SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS All of the above co-axial sockets are compatible for use with EYE/D digital signal sender when part of a satellite box system with RF-OUT 2 (Sky/Sky+) see page 41-42. SECURITY 44 AMPLIFIERS/DISTRIBUTION WALLPLATES WITH CABLE ENTRY O R D E R I N G D ATA DISABLED WA L L P L AT E S W I T H C A B L E E N T RY Description Units WPBB50 WPBB50/BK WPWB50 WPBB100 Single Wallplate with cable entry - white/black Single Wallplate with cable entry - black/black Single Wallplate with cable entry - white/white Double Wallplate with cable entry - white/black Double Wallplate with cable entry - black/black Double Wallplate with cable entry - white/white Single Surface Wall Box - 41mm deep Double Surface Wall Box - 47mm deep each each each each each each each each WPBB100/BK WPWB100 PATBOX41 PATBOX47 APPLICATIONS Decorative wall plates for use with cable management through a wall. FEATURES WPBB50/BK • • • • TV AMPLIFIERS TIME CONTROLS WPBB50 Catalogue No. LIGHTING CONTROLS WPWB50 Available in single or double plate size (brush size 50 x 50mm and 50 x 100mm) Available in a selection of colours Able to accept a SCART plug through the brush, even on the single plate Can be flush or surface mounted using standard wall box (not supplied) or simply to cover a hole in the wall (wall plugs/screws not supplied) • Ideal for routing pre terminated leads to/from Audio/Visual devices e.g. TV, Stereo, set-top box, recorders, computers Pattress boxes available in both single and double plate. Double plate is 47mm deep and includes cable clamps. Single plate is 41mm deep. NOTE: cables not included PATBOX41 TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS PATBOX47 WPWB100 WPBB100 CAT 5E CABLES O R D E R I N G D ATA CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS WPBB100/BK AERIAL SPLITTERS CAT 5E CABLE Catalogue No. Description Units CAT5E/05W CAT5E/1W CAT5E/2W CAT5E/3W CAT5E/5W CAT5E/10W CAT5E/15W CAT5E/20W CAT5E patch lead, white 0.5m CAT5E patch lead, white 1m CAT5E patch lead, white 2m CAT5E patch lead, white 3m CAT5E patch lead, white 5m CAT5E patch lead, white 10m CAT5E patch lead, white 15m CAT5E patch lead, white 20m each each each each each each each each APPLICATIONS High quality RJ45 ethernet cable for connecting your LAN equipped devices (e.g. VDSS range of Door Entry system, PC, Laptop, PS3/4, Xbox 360/One, BluRay Player) to your network or router. With moulded plugs for long lasting design these cables are perfect for your home or office. TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] LIGHTING CONTROLS 45 O R D E R I N G D ATA IP55 PROFESSIONAL PIR MOTION DETECTOR (10A) Catalogue No. Description Units ISIMAT+ Motion Sensor each SECURITY PIR MOTION DETECTORS ALPHA 1200 VA VA 2000 VA VA 2000 W 900 VA VA 100 VA VA ISIMAT+ Catalogue No. Description Units ECOMAT Ultasound Detector each ALPHA APPLICATIONS Ultrasound detection, high performance detects even slight movements and can be inconspicuously installed in a wide range of applications ECOMAT FEATURES • surface installation, it can be mounted on a flat wall, ceiling or also on inner or outer corners by means of the accessory included Zero-crossing relay for a better switching of LED-type loads, fluorescent or low energy lighting Adjustable parameters detection area, timing and light sensitivity Mounts onto walls, ceilings and both concealed or surface, internal or external corners using the brackets supplied. Adjustable 3 sec-30 min Adjustable lux 5 - 2000 Adjustable range 0.5m - 12m Ceiling 6m diameter @ 2.5m height (360º) Walls 12m frontal and 6m lateral @ 2.5m height (270º) O R D E R I N G D ATA PIR MOTION DETECTOR (14A) 360º Description Units PRO/P360 360˚ PIR Detector (white) each APPLICATIONS Switches on lighting loads or other signalling devices automatically by detecting movement. Ideal for use in car parks, driveways, porches, patios and building entrances in domestic, commercial and industrial installations. 100 VA VA ECOMAT PLUG-IN TERMINAL BLOCK FOR EASY CONNECTION IP45 PRO/P360 ALL ROUND 360° DETECTION FEATURES High switching capacity (14 Amps) 90º Adjustable pivoted head Wall, ceiling or corner mounted Plug-in terminal block for easy connection • Corner bracket supplied • • • • 2 DETECTION ZONES ENSURE NO DEAD ZONE SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS 230V AC 50Hz 14A (resistive) 3000W 2300W 600W 300W 6 secs - 12 mins IP45 900 VA VA TEST EQUIPMENT & TOOLS TECHNICAL SPECIFICATION Voltage: Max Load: Incandescent: Halogen: Fluorescent: Energy Saving Lamps: Operation Time: IP Rating: 900 VA VA CABLE PROTECTION Catalogue No. 2000 W INDUSTRIAL CONTROLS & THERMOSTATS • • • • 2000 VA VA COMMUNICATIONS • 1200 VA VA LIGHTING CONTROLS • 2000 W TV AMPLIFIERS PROFESSIONAL PIR MOTION DETECTOR (6A) • TIME CONTROLS 900 VA VA O R D E R I N G D ATA • Can detect through non-metallic surfaces and can be inconspicuously installed in either plaster or cork ceilings. It can also detect through plastic, wood or brick. This feature allows the device to detect while remaining out of sight, which is ideal from an aesthetic and safety point of view in hotels, offices, meeting rooms, etc • Detection does not depend on ambient temperature, therefore it maintains accuracy in hot or humid environments such as kitchens or showers • ECOMAT detects emitted wave bounce off, so detection improves in closed areas such as corridors, entrance halls, bathroom facilities and offices. It decreases in open or large spaces such as garages, porches etc. In case of DISABLED 2000 W APPLICATIONS ISIMAT+ A motion detector, with adjustable head and 200° detection angle and up to twelve metres frontal detection range when installed at two to three metres height. The ISIMAT+ detects invisible infrared from persons and other heat sources without emitting any type of radiation, it’s output circuit activates when a source moves in front of its detector and deactivates when it no longer detects the movement after an adjustable delay. ISIMAT+ FEATURES • 10A Rating • 200° detection angle • 12m frontal detection, lateral 8m and 180° horizontal rotation of detector • IP55 rated • 3 seconds to 30 minutes timing • Adjustable between 5 - 200 lux LIGHTING CONTROLS SECURITY 46 PIR MOTION DETECTORS O R D E R I N G D ATA DISABLED PROFESSIONAL PIR MOTION DETECTOR (5A) 360º Catalogue No. Description Units CIRCUMAT Ceiling Multi-sensor - surface each APPLICATIONS CIRCUMAT Designed to be small and discrete. Ideal for hotels and offices for the automatic control of lighting. ALPHA 2000 W TIME CONTROLS 1200 VA VA 2000 VA VA CIRCUMAT FEATURES 2000 W 900 VA VA TV AMPLIFIERS 900 VA VA 100 VA VA CIRCUMAT • Surface mount on the ceiling (120mm diameter x 25mm height) • Status LED detects movement or changes in lighting conditions outside of the selected level • Zero-crossing relay for a better switching of LED-type loads, fluorescent or low energy lighting • Adjustable parameters: detection area, timing and light sensitivity • 7m diameter detection range, (360º) @ 2.5mh • Power supply 230V AC. 50-60Hz • Switch capacity 5A at 230V AC • Timing from 3 sec to 30 min • Pulse function 1 sec ON/9 sec OFF • Light sensitivity from 5 to 1000 lux O R D E R I N G D ATA PIR MOTION DETECTOR (10A)360º Catalogue No. LIGHTING CONTROLS COMMUNICATIONS Units each each each ACCESSORIES ALPHA 2000 W DICROMAT+ CR Catalogue No. Description MANDO CR Remote Control for CR range of proximity switches Units each DICROMAT AND DICROMAT+ CR APPLICATIONS 1200 VA VA 900 VA VA A motion detector for flush ceiling installation, which can be set up by controls in the sensor head or on the DICROMAT+ CR also by the MANDO CR remote control (this allows the setting of the parameters without having to climb a ladder and saves time in both installation and maintenance). Both sensors are ideal on their own or for installations with several single detectors such as hotels, offices, corridors, etc. (DICROMAT+CR with DICROMAT SENSOR(s)+ 100 VA VA PRODUCT SPECIFICATION 2000 VA VA 2000 W 900 VA VA • 360º detection angle and up to 7m detection diameter (when installed at 2.5m height). • Ideal for hotels, large rooms or corridor installation as they allow additional movement sensors to be connected (up to 4) from a single power supply (DICROMAT SENSOR+) • Adjustable parameters: timing, light, and sensitivity • It can be programmed using the remote control CR CONTROL (optional) • Status LED that activates when the system detects motion • Zero-crossing relay for better switching LED type loads, fluorescent or low energy lighting CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS Description DICROMAT Motion Detector DICROMAT+ CR Programmable Motion Detector DICROMAT SENSOR+ Additional Sensor MANDO CR APPLICATIONS TEST EQUIPMENT & TOOLS Remote Control for programming CR range of proximity switches, allows adjustment of time/lux/sensitivity etc. without the need to reach the sensor and so reduce the need for ladders/work platforms or tools. FUSES & GENERAL PRODUCTS MANDO CR MANDO CR FEATURES • 8m range (approx.) • Memory (repeat last program) • Additional features: test, holiday mode, alarm mode and 5 hour timer TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] LIGHTING CONTROLS 47 PEC1000/EL IDEAL FOR BUILD-IN APPLICATIONS PCM1000 SECURITY PHOTO ELECTRIC CONTROLS DISABLED P12RE IP65 P42E TIME CONTROLS IP54 ALPHA O R D E R I N G D ATA 2000 W VEGA 1200 VA VA 2000 VA VA 2000 W 900 VA VA 900 VA VA IP54 Units Electronic PEC Kit Electronic PEC Head (for PEC1000) Nitelighter PEC Head Light Sensor Two Part Photocell 70 lux P42 Detector for P42E Only each each each each each each APPLICATIONS Exterior security lighting at warehouses, goods yards, hospitals, colleges, car parks, private dwellings and street lighting. O R D E R I N G D ATA P H O T O - E L E C T R I C C E L L W I T H A D J U S TA B L E T I M E / L U X Description Units VEGA CDS27 Electronic PEC Adjustable Lux Electronic PEC Adjustable 10(3)A each each APPLICATIONS To control exterior lighting. INDUSTRIAL CONTROLS & THERMOSTATS CABLE PROTECTION VEGA FEATURES CDS27 FEATURES lux levels can be set between 5 - 300 lux • Twilight switch for control of lighting installations LED lux level indicator • Controls a wide range of lighting loads Energy Saving (including LED), making this unit an IP54 rating ideal element for public lighting 1-8 hr adjustable time installations Delay to protect unwanted operation • 60 second delay to prevent unwanted Rated 10A operation. • Wall and lamp post installation is possible • Adjustable lux 5 - 300 • IP54 rating • Rated 10A @ 230V AC PEC MODELS INCLUDE PEC1000/EL standard PEC is available as an electronic kit. Consisting of PEC Head, NEMA Socket and Wall Bracket. Heads only (T14/EL) PRODUCT SPECIFICATION also available. PCM1000 is a compact wire-in PEC, specifically Photo-Electric Cells are designed to automatically switch lights on at dusk and designed for mounting into lighting fixtures, off at dawn. including road signs, floodlights, bulkheads, patio lamps and other decorative luminaires. Available with adjustable or precalibrated to switch at 70 lux as standard. Incorporates a photodiode sensor. This ensures that not only will they P42E and P12RE are two part photocell kits. operate during night hours but also Ideal for use where a separate sensor head is during prolonged periods of dull weather required e.g bulk head. P42E features an on/off conditions when adequate lighting may switch. Replacement head available (P42D). be equally as important. Both types are suitable for use with all types of PEC units incorporate a delay factor to lamps (including high pressure and low pressure ensure that sudden lighting (such as car sodium, mercury fluorescent and tungsten headlights), do not trigger the switch. filament). COMMUNICATIONS Catalogue No. • • • • • • • Description PEC1000/EL T14/EL PCM1000 P12RE P42E P42D LIGHTING CONTROLS CDS27 100 VA VA Catalogue No. TV AMPLIFIERS PHOTO-ELECTRIC CELLS CDS27 TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION Catalogue No. Type Resistive Load Lamp Load Lux PEC1000/EL T14/EL PCM1000 P12RE P42E VEGA Electronic Electronic Thermal Electronic Electronic Electronic 2000 Watts 2000 Watts 2000 Watts 2000 Watts 2000 Watts 2000 Watts 2 x 400W HPS 60µ PFC 2 x 400W HPS 60µ PFC 2 x 400W HPS 60µ PFC 2 x 250W HPS 60µ PFC 2 x 250 HPS 60µ PFC 2 x 250 HPS 60µ PFC 70 70 70 70 70 70 SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS Lux Setting: Timer Setting: Switching Delay: Operating Temperature range: Environmental Protection: 230V AC 50Hz 10 Amps Resistive - 3 Amps Inductive 2300W Incandescent 1000W Halogen 400W Fluorescent (without compensated capacitor) 250W Energy Saving Lamps 5 - 300 lux adjustable 1 - 8 hours adjustable or Dusk to Dawn ON/OFF - 60 secs -20˚C to +45˚C IP 54 TEST EQUIPMENT & TOOLS Operating Voltage: Maximum Load: SECURITY 48 LIGHTING CONTROLS KEY CARD ENTRY / ENERGY CONTROL KIT O R D E R I N G D ATA K E Y C A R D E N T RY / E N E R G Y C O N T R O L K I T DISABLED IP65 CREDIT CARD SIZE KCE2/CC/S TIME CONTROLS TV AMPLIFIERS LIGHTING CONTROLS COMMUNICATIONS INDUSTRIAL CONTROLS & THERMOSTATS Description Units KCE1/CC/S KCE2/CC/S CARD/CC EDL 1 Switch Key Card Entry/Energy Control Kit 2 Switch Key Card Entry/Energy Control Kit Key Card Pack of 10 Electric Door Lock 8-12V AC each each each each APPLICATIONS EACH KIT CONTAINS: Offers a secure method of providing restricted • 1 or 2 x 25A surface mounting entry as well as helping to reduce energy costs card switches for hotels, boarding houses, schools and • Control unit (25A) for door entry, lighting and air conditioning etc. colleges, conference centres, fitness clubs, offices, laboratories and research establishments. • 10 x Key Cards KEY CARDS ENERGY EFFICIENT CABLE PROTECTION Catalogue No. USE OF LIGHT AND POWER SURFACE MOUNTING - CAN BE USED FOR DOOR ENTRY AND/OR CONTROL OF LIGHTING AND POWER FEATURES • Weatherproof (IP65) card switches room or building - provides door entry suitable for installation indoors and (when wired to an appropriate door outdoors lock) • Can be installed with an appropriate 3). One card switch installed inside the door lock enabling room access to room or building - provides switching of keycard holders only lighting, air conditioning etc • Suitable for installation in three different • Energy efficient use of light and power ways: • 35 second delay after card is removed 1). One card switch installed outside a allows safe exit from room room or building and one card switch • Back-lit card ‘sense’ indicator installed inside the room or building • Neon locator provides door entry (when wired to an • Credit card size key cards appropriate door lock) and switching of • Additional key cards available lighting, air conditioning etc • 2 separate memories (max 20 cards, 2). One card switch installed outside a 2 x 10) e.g. guests and staff KEY CARD SWITCHES O R D E R I N G D ATA CONTROLS USE OF LIGHT & POWER KEYCARD SWITCHES KEYCARD SIZE 80x25mm (NOT CREDIT CARD SIZE) Units KCS KCS/PC KCS/PB KCS/SK each each each each Keycard Switch (16A) white Keycard Switch (16A) Polished Chrome Finish Keycard Switch (16A) Polished Brass Finish Keycard - pack of 10 IDEAL FOR HOTELS, GUEST HOUSES, SHOPS & OFFICES WHITE Catalogue No. Description KCS APPLICATIONS Helps to reduce energy costs and is a safety benefit in that unattended rooms are not left with electrical devices switched on. e.g. hairdryers, air conditioning, lighting etc. On removal of the keycard, the energy supply is left connected for 30 seconds to allow safe exit from the room. An integral neon assists the user to locate the keyswitch on their return. Available in a range of attractive finishes. FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS FEATURES CHROME FINISH KCS/PC • Can reduce lighting, heating and air conditioning costs • High current rating (16A) • Surface or flush mountable • Unique keycard size (80L x 45W mm) 1 supplied with each switch BRASS FINISH KCS/PB • • • • • Neon locator 30 secs switch off delay after card removed Metallic finish options Additional keycards available Fits single gang backbox for flush or surface applications Note: Live and Neutral required. TECHNICAL ADVICE – MONDAY TO THURSDAY TEL 01923 220277: EMAIL [email protected] LIGHTING CONTROLS 49 SECURITY 1500 WATTS SLIDE DIMMER SWITCH (MAINS/LOW VOLTAGE) O R D E R I N G D ATA 1 5 0 0 WAT T S S L I D E D I M M E R S W I T C H (FOR ALL LIGHTING LOADS) Description Units SD1500/BL 1500 Watt Mains Black Dimmer each APPLICATIONS Ambient lighting control in offices, restaurants, shops and homes, etc. DISABLED Catalogue No. PRODUCT SPECIFICATION • Metal front plate finished in matt black. • Power handling capacity 20 - 1500w (Surface Mounting), 20 -1200w (Flush Mounting) TIME CONTROLS • Supplied with a two gang plastic surface box • Dimensions 120 (h) x 178 (w) x 45mm (d) • Quick blow fuse protection • Complies with EC and Low Voltage Directives. Also complies with BS EN 55015, BS EN 61547 and BS EN 60555-2 TV AMPLIFIERS FEATURES • Capable of dimming all types of resistive and inductive mains loads, including LED, Low Energy, Halogen, Low Voltage and Neon Lighting The Dimming range is dependant on the load types and load performance • Easily replaced fuse, supplied with two spares • LED Indicator • Suitable for mounting vertically as well as horizontally • Smooth, calibrated slide operation • Two year guarantee SD1500/BL O R D E R I N G D ATA D I M M E R S W I T C H E S ( M A I N S V O LTA G E ) Catalogue No. Description DM8/W 1000 Watt Mains White DM8/C 1000 Watt Mains Matt Chrome Units each each HEAVY DUTY UP TO 1000 WATTS APPLICATIONS PRODUCT SPECIFICATION Available in 1000W mains (resistive). Finished in White, or Matt chrome. Suitable for mains lighting or electronic lighting transformers FROM A 1 GANG PLATE MAINS VOLTAGE FEATURES (MAINS VOLTAGE) • High Wattage • Single Plate • 1 or 2 way switching CABLE PROTECTION Note:If branded GU9/10 lamps fitted (Osram, GE, Phillips etc) full load can be used. Non recognised brands, reduce load by 50% If branded dimmable energy saving lamps fitted it can control a minimum of 6 up to a maximum of 15 lamps (not suitable for fluorescent tubes) DM8/W INDUSTRIAL CONTROLS & THERMOSTATS Restaurants, homes, offices etc. Load 200W-1000W 200W-1000W COMMUNICATIONS DIMMER SWITCHES (MAINS) LIGHTING CONTROLS DIMS ALL TYPES OF LOAD FITS A STANDARD 25mm BOX TEST EQUIPMENT & TOOLS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS DM8/C LIGHTING CONTROLS SECURITY 50 TOUCH AND REMOTE CONTROL DIMMER SWITCHES O R D E R I N G D ATA DISABLED TOUCH AND REMOTE CONTROL DIMMER SWITCHES TIME CONTROLS TV AMPLIFIERS LIGHTING CONTROLS COMMUNICATIONS INDUSTRIAL CONTROLS & THERMOSTATS CABLE PROTECTION TEST EQUIPMENT & TOOLS Description Units RCD/6OOW RCD/6OOC RCD/6OOMC RC/6OO 10W-600W Dimmer Switch - White 10W-600W Dimmer Switch - Matt Chrome 10W-600W Dimmer Switch - Mirror Chrome Remote Control each each each each APPLICATIONS Homes, restaurants, clubs, offices, residential care homes etc. The remote control facility is particularly beneficial for infirm or disabled people. RCD/600C FUSES & GENERAL PRODUCTS Catalogue No. RCD/600W RCD/600MC FEATURES PRODUCT SPECIFICATION • Touch control or optional remote control operation • Can be used with, GU10 or similar mains halogen lamps • Suitable for use with mains or low voltage circuits • Overload protected • Inbuilt “soft-start” extends lamp life and gently raises light level • Each remote control can operate up to 8 dimmers • Fits standard 1 gang 16mm flush box • Max 600 watts rating (GU10 350 watts) • Remote Control Handset (optional) (batteries not supplied) • Complies with BS EN 55015 and BS EN 60669-2-1 600 WATTS ON 1 GANG PLATE REMOTE OR TOUCH CONTROLLED RC/600 ULTRA SLIM 1500 WATTS DIMMER SWITCH (MAINS/LOW VOLTAGE) 1500 WATTS SCREWLESS APPEARANCE ID1500 BRUSHED STEEL O R D E R I N G D ATA ULTRA SLIM 1500 WATTS DIMMER SWITCH (MAINS/LOW VOLTAGE) Catalogue No. Description Units ID1500 100 - 1500W Dimmer (Brushed Steel) each APPLICATIONS Restaurants, hotels, shops, homes and offices. FEATURES • Ultra slim screwless front plate - stainless • 1 or 2 way switching steel finish • Each dimmer can control up to 10 ERL • High wattage (YT range) transformers • Soft start extends lamp life • Complies with BS EN 60669-2-1 and BS EN 55015 (not suitable for • Safety shutdown circuitry fluorescent or energy saving lamps) • Fits standard 2G 25mm box (not supplied) TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] LIGHTING CONTROLS 51 SECURITY FLEXIBLE LAMP ROPELIGHT O R D E R I N G D ATA LED FLEXIBLE ROPELIGHT Catalogue No Description LEDIF50/W LEDIF10/W Units Catalogue No 50m Kit 10m Kit Description LED/F1 LED/F13 WL/310 Units Mains Lead (Internal) Mains Lead (External) Variable Flash Controller FLEXIBLE LAMP ROPELIGHT each each each Description Units IF50/C IF50/Y IF50/G IF10/C Clear Yellow Green Clear 50m Kit 50m Kit 50m kit 10m Kit IF ROPELIGHT ACCESSORIES Description Units Mains Lead (Internal) Mains Lead (External) Variable Flash Controller IF/LED ROPELIGHT ACCESSORIES each each each Description Units F3 F4 F6 F8 F11 F14 Coupler End Cap Mounting Clip Channelling 2 x 1 Metre T Connector Water Resistant Cover each each each each each each LOW POWER CONSUMPTION LOW ROPELIGHT TEMPERATURE 50,000 HOUR LIFE LEDIF50 Range COMMUNICATIONS APPLICATIONS Ropelight is suitable for exterior or interior use. Ideal for the illumination of building outlines, festive street lighting, forming shapes, shop window displays or for decorative lighting inside hotels, clubs, pubs, garden centres, houses etc. Run lengths up to 100 metres achievable, with a wide range of colours and accessories, the possibilities are numerous. PRODUCT SPECIFICATION This Flexible Ropelight is made from quality durable solid PVC. Highly flexible with temperature stability and UV resistance. Outdoor/Indoor Use Ease of Installation High Strength Long Standard Lamp Life (25,000 hrs) Flexible Shock Resistant Re-usable Dimmable (IF Range) • • • • 1 x 10m length Ropelight 1 x Mains Lead 1 x Male Connector 1 x End Cap 50m KIT CONTAINS • 1 x 50m length Ropelight • 1 x Mains Lead • 1 x End Cap 25,000 HOUR LIFE IF50 Range CABLE PROTECTION • • • • • • • • 10m KIT CONTAINS OPERATING TEMP -30°C TO +45°Ç INDUSTRIAL CONTROLS & THERMOSTATS FEATURES LED RANGE Voltage: Outside Diameter: Bulb Spacing: Bulbs Per Metre: Cutting Length: 230V 13mm 2.78cm 36 1 metre 230V 13mm 2.78cm 36 2 metre F8 CHANNELING HOLDS ROPELIGHT NEATLY IN POSITION SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS IF RANGE TEST EQUIPMENT & TOOLS CONTROLLER FOR ROPELIGHT IF Range Cat No WL/2C = Static/variable flash, up to 100m run (Internal) LED Range Cat No WL/310 =Variable flash up to 100m run (Internal) TECHNICAL SPECIFICATION LIGHTING CONTROLS Catalogue No TV AMPLIFIERS F1 F13 WL/2C SUITABLE FOR INTERNAL & EXTERNAL USE TIME CONTROLS Catalogue No Catalogue No AVAILABLE IN 10M OR 50M KITS DISABLED White LED White LED LED ROPELIGHT ACCESSORIES COMMUNICATIONS DISABLED SECURITY 52 WIRELESS INTERCOM SYSTEM UNLIMITED EXPANDABILITY O R D E R I N G D ATA WIRELESS INTERCOM SYSTEM Catalogue No. Description Units FS-2 FS-25 Wireless Intercom Kit Additional Intercom Stations each each APPLICATIONS Wireless communication in offices, factories, warehouses etc where cable installation would be difficult or expensive. 2KM RANGE EACH KIT CONTAINS: • 2 x Intercom stations • 2 x Plug-in power supplies • 2 x Li-ion batteries FEATURES No cable required Up to 2 Km range (line of sight) High quality speech Can have unlimited number of stations in system • Hands free operation • Mains or rechargeable lithium battery operation (batteries and mains adaptors supplied) TIME CONTROLS • • • • FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS FS-2 • 99 channels available (446MHz) • Volume control • Desk, wall mountable or carry (fully portable) • Licence exempt • 5 call tones • Loudspeaker Headphone socket (3.5mm) • Adjustable ring tone • VOX DIGITAL INTERCOM SYSTEM HANDS FREE SPEECH WALL OR DESK MOUNTED O R D E R I N G D ATA D I G I TA L I N T E R C O M S Y S T E M Catalogue No. Description Units CM-211MK/2 CM-211MK/4 CM-211MK/6 CM-211M 2 Way Starter Kit 4 Way Starter Kit 6 Way Starter Kit Additional Intercom Units each each each each APPLICATIONS Ideal for small businesses, offices, warehouses, factories and private dwellings. EACH KIT CONTAINS: CM-211M EACH INTERCOM IS AN 11 BUTTON MASTER VOLUME CONTROL EXPANDABLE UP TO 12 STATIONS • • • • 2 x Intercom units (CM-211MK/2) 4 x Intercom units (CM-211MK/4) 6 x Intercom units (CM-211MK/6) 1 x Power Supply (12V DC) CABLE REQUIREMENTS 5 cores + 1 core per station FEATURES • • • • • Master to Master system Hands-free operation Desk or wall mounting Simple to use Good speech quality • • • • Simultaneous two way speech Electronic call tone Speech and call tone volume control Expandable up to 12 stations 4 & 6 WAY KITS AVAILABLE TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] THERMOSTATS/HEATING CONTROLS 53 SECURITY FROSTATS O R D E R I N G D ATA T H E R M O S TAT S Description Units FTR/E FTR/N 10A Frostat with Housing(IP65) 10A Frostat each each TAMPER RESISTANT APPLICATIONS The FTR/E allows control of low temperature switching in internal or external applications or where condensation, tampering etc could be a concern. The FTR/E is suitable for internal applications. TIME CONTROLS FTR/N PRODUCT SPECIFICATION 3 wire, compact thermostat with high amperage contacts. An accelerator is also fitted for fast response. IP65 TV AMPLIFIERS FTR/E PRODUCT SPECIFICATION 3 wire tamper proof thermostat in an IP65 rated enclosure. Suitable for greenhouses, garages and other external situations. Can also be used for ventilation control. An accelerator is also fitted. DISABLED Catalogue No. FTR/E LIGHTING CONTROLS TECHNICAL SPECIFICATION Catalogue No. FTR/E FTR/N Temperature range -5˚C - +25˚C -5˚C to +15˚C Voltage range 230V AC 230V AC Current rating - Heating 10A 10A Current rating - Cooling 3A 2A Cable requirements 3 core 3 core COMMUNICATIONS NOTE Modern central heating boilers produce a much lower background heating temperature. When installed in a garage/outhouse etc, consider adding pipe thermostats for additional protection to the frostat circuitry. FTR/N INDUSTRIAL CONTROLS & THERMOSTATS CYLINDER/PIPE THERMOSTAT SUPPLIED WITH O R D E R I N G D ATA C Y L I N D E R / P I P E T H E R M O S TAT Description Units CPT16 16A Cylinder/Pipe Thermostat each APPLICATIONS For fitting to heating pipes or hot water cylinders. COILED SPRING FIXING CABLE VOLT - FREE CONTACTS CPT16 SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS TECHNICAL SPECIFICATION Catalogue No. CPT16 Temperature range 10˚C - 90˚C Voltage range 9V - 230V AC Current rating - Heating 16A (2.5) Cable requirements 2 core + earth TEST EQUIPMENT & TOOLS CPT16 PRODUCT SPECIFICATION 2 wire compact design Cylinder/Pipe Thermostat with high amperage contacts. The strong spring coiled fixing cable supplied gives excellent contact to cylinder or pipe. CABLE PROTECTION Catalogue No. SECURITY 54 THERMOSTATS/HEATING CONTROLS DIGITAL THERMOSTATS O R D E R I N G D ATA TWO WIRE DRT1 DISABLED BATTERY OPERATED TECHNICAL SPECIFICATION Catalogue Nos. DRT1/DRT2 Temperature range 50C - 350C Power supply 2 x AAA batteries (not supplied) Current rating - Heating 5A (24-240V) Current rating - Cooling 5A (24-240V) Cable requirement 2 core Description Units DRT1 DRT2 5A Digital Room Thermostat 5A Programmable Digital Room Thermostat each each APPLICATIONS Houses, apartments, sheltered housing, offices, waiting rooms, shops, restaurants and other commercial buildings. FEATURES • Accurate control temperature measurement (0.50C) • Requires only 2 core cable • Battery operation • Large clear LCD display • Flush or surface mountable (fits directly onto 35mm deep 1 gang flush box) • Heating or cooling operation PROGRAMMABLE RADIO CONTROLLED DIGITAL THERMOSTATS O R D E R I N G D ATA DRT1RC RADIO CONTROLLED BATTERY OPERATED DIGITAL ROOM THERMOSTATS Catalogue No. Description Units DRT1RC 5A Wire-Free Radio Controlled Digital Room Thermostat DRT2RC 5A Wire-Free Radio Controlled Programmable Digital Room Thermostat each FEATURES • Accurate control temperature measurement (0.50C) • Requires only 2 core cable • Battery operation PRODUCT SPECIFICATION PROGRAMMABLE WIRE FREE SAVES INSTALLATION TIME each APPLICATIONS Houses, apartments, sheltered housing, offices, waiting rooms, shops, restaurants and other commercial buildings. DRT2RC CABLE PROTECTION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS Catalogue No. PRODUCT SPECIFICATION DRT1 • 4 inbuilt programmes per time group • Easy to use digital thermostat (Weekdays-Saturday or Sunday) • Function displays symbols to indicate • Temporary or permanent override on/off • Low battery warning • 0.50C increments to set temperature • 12 or 24 hour clock display • 0.50C increment temperature display • Time adjustable in 15 minute segments DRT2 • Delay on ON facility (ideal for • Easy to use programmable digital compressor systems) thermostat • Auto defrost at 50C • Easily programmed • 0.10C temperature display VOLT - FREE CONTACTS INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS TIME CONTROLS DRT2 DIGITAL ROOM THERMOSTATS DRT1RC • Easy to use wire-free radio controlled digital thermostat • Receiver fits standard 35mm 1 gang flush box • Specification as DRT1 • Large clear LCD display • Flush or surface mountable (fits directly onto 35mm deep 1 gang flush box) • Heating or cooling operation TECHNICAL SPECIFICATION Catalogue Nos. DRT1RC/DRT2RC Temperature range 50C - 350C Power supply 2 x AAA batteries (not supplied) Current rating - Heating 5A (24-240V) Current rating - Cooling 5A (24-240V) Cable requirement 2 core DRT2RC • Easy to use wire-free radio controlled programmable digital thermostat • Receiver fits standard 35mm 1 gang flush box • Specification as DRT2 TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] THERMOSTATS/HEATING CONTROLS 55 O R D E R I N G D ATA Description Units RT16/3 RT16/3N 9105 16A Room Thermostat Room Thermostat with Neon Thermostat/Programmer Cover each each each APPLICATIONS Room temperature control of heating, cooling or fan devices. Wide range of models available for general purpose and specialised applications. RT16/3 PRODUCT SPECIFICATION TECHNICAL SPECIFICATION Catalogue No. RT16/3 Power supply 230V AC Temperature range 10˚C - 30˚C Voltage range 230V AC Current rating - Heating 16A (4) Cable requirements 3 core 3 wire thermostat with added benefits of an accelerator and an indicator light, (RT16/3N) for prompt response and status. RT16/3 RT16/3N LIGHTING CONTROLS • Compact and attractive designs • Requires only 2 core cable + earth (RT16/2) • Neon Indicator (RT16/3N) O R D E R I N G D ATA 2 WIRE T H E R M O S TAT S Description Units RT16/2 9105 16A Room Thermostat Thermostat/Programmer Cover each each RT16/2 TECHNICAL SPECIFICATION Catalogue No. R16/2 Temperature range 5˚C - 30˚C Voltage range 230V AC Current rating - Heating 16A (2.5) Current rating - Cooling 2.5A Cable requirements 2 core + earth RT16/3N with 9105 SEE PAGE 30 T H E R M O S TAT S Catalogue No. Description Units TRT16/N 9105 15A Tamper Resistant Thermostat Thermostat/Programmer Cover each each 3 wire (3 core), compact thermostat with high amperage contacts and the added benefit of an accelerator. TECHNICAL SPECIFICATION Catalogue No. TRT16/N Power supply 230V AC Temperature range 6˚C - +30˚C Voltage range 230V AC Current rating - Heating 15A (2.5) Current rating - Cooling 5A Cable requirements 3 core TRT16/N RESISTANT TEST EQUIPMENT & TOOLS TRT16/N PRODUCT SPECIFICATION TAMPER CABLE PROTECTION O R D E R I N G D ATA INDUSTRIAL CONTROLS & THERMOSTATS 2 wire compact thermostat with high amperage contacts, suitable for heating or cooling applications. Membrane operation ensures long accuracy life. COMMUNICATIONS Catalogue No. R16/2 PRODUCT SPECIFICATION TV AMPLIFIERS • High Amperage Ratings • Accelerator Fitted (TRT16/N, RT16/3, RT16/3N, FTR/E) • Tamper resistant (TRT16/N) • Fast response operation TIME CONTROLS FEATURES DISABLED AVAILABLE WITH OR WITHOUT NEON INDICATOR T H E R M O S TAT S Catalogue No. SECURITY THERMOSTATS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS PINS LOCK TO RESTRICT MOVEMENT THERMOSTATS/HEATING CONTROLS SECURITY 56 DIGITAL CENTRAL HEATING PROGRAMMERS UNIVERSAL O R D E R I N G D ATA D I G I TA L C E N T R A L H E AT I N G P R O G R A M M E R DISABLED BACK PLATE Catalogue No. Description Units CHC/1 9105 Digital Central Heating/Hot Water Programmer Thermostat/Programmer Cover each each APPLICATIONS Controlling central heating and hot water in domestic, commercial and industrial installations. Suitable for gravity and fully pumped systems. IDEAL CHC/1 LIGHTING CONTROLS TV AMPLIFIERS TIME CONTROLS FEATURES REPLACEMENT PROGRAMMER COMMUNICATIONS SEE PAGE 30 O R D E R I N G D ATA D I G I TA L C E N T R A L H E AT I N G P R O G R A M M E R Catalogue No. Description Units HC1 9105 1 Channel Digital Central Heating Programmer Thermostat/Programmer Cover each each INDUSTRIAL CONTROLS & THERMOSTATS APPLICATIONS A single channel programmer ideal for use in dwellings that use a combination boiler as the heat source. FEATURES CABLE PROTECTION TEST EQUIPMENT & TOOLS • 7 day 24 hour or weekday/weekend programme options • Inbuilt programmes • Back light facility • Integral frostat and roomstat • 3 ON/3 OFF switchings a day or permanent ON/OFF • ON/OFF override and 1-3 hour extension control • Surface mounting and fits 1 gang standard flush wall box TECHNICAL SPECIFICATION Catalogue No. CHC/1 Power supply 230V AC 50Hz Contact rating 3(1)A No. of switched circuits 2 (CH + HW) No. of switchings/day Up to 3 ON/3 OFF CHC/1 with 9105 HC1 FUSES & GENERAL PRODUCTS • Compact stylish design • Simple to programme and use • Ideal as a replacement to existing programmers as hot shoe, plug in base fitting is compatible with most existing central heating controllers • Central heating/hot water control (joint or independent hot water control) • Large clear LCD display • Battery back up (maintains programme 30 days) SINGLE CHANNEL VERSION FOR USE WITH A COMBINATION BOILER • Compact stylish design • Simple to programme and use • Ideal as a replacement to existing programmers as hot shoe, plug-in base fitting is compatible with most existing central heating controllers • Battery back up (maintains programme for 30 days in the event of power failure) • 7 day 24 hour or weekday/weekend programme options • • • • Inbuilt programmes Back light facility Integral frostat and roomstat 3 ON/3 OFF switching’s a day or permanent ON/OFF • ON/OFF override and 1-3 hour extension control • Surface mounting and fits 1 gang standard flush wall box TECHNICAL SPECIFICATION Catalogue No. HC1 Power supply 230V AC 50Hz Contact rating 3(1)A No. of switched circuits 1 No. of switchings/day Up to 3 ON/3 OFF TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] THERMOSTATS/HEATING CONTROLS NO MORE O R D E R I N G D ATA S E L F - R E G U L AT I N G T R A C E H E AT I N G C A B L E Description Units THC/2/K THC/5/K THC/20 THC/PCK FTR/E FTR/N 2m Length Self-Regulating Trace Heating Cable Kit 5m Length Self-Regulating Trace Heating Cable Kit 20m Drum Self-Regulating Trace Heating Cable Termination Kit 10A Frostat with IP65 Housing 10A Frostat each each each each each each FROZEN PIPES THC DISABLED Catalogue No. SECURITY SELF REGULATING TRACE HEATING CABLE (THC) 57 Note: A heat gun [not supplied] and crimping pliers [not supplied] are required to complete installation TIME CONTROLS APPLICATIONS The ideal solution for low power frost protection or temperature maintenance on metallic and non-metallic pipes, valves, roof gutters, drain pipes, pumps, water taps, small water tanks and boiler condensate pipes, etc. • Self-regulating – output automatically adjusts to suit the prevailing conditions, the lower the ambient temperature, the higher the output • Tough cable protection with tin-plated copper braiding and a thermoplastic outer sleeve • Moisture proof and UV resistant • Max exposure temperature 80°C (de-energised), 65°C (energised) • Can be used in a wide variety of environments NOTE: FOR 20 METRE DRUM Remember to order a termination kit for each run of trace heating cable required. • 230V, nominal output 10W/m @10°C ambient temperature • Min bending radius 25mm • Supplied in 20 metre drums for cutting to virtually any required length, or in 5 or 2M pre-cut lengths. Max cable run 144M @ 10°C (16Amp) power. MOISTURE PROOF AND UV RESISTANT • Use with ERL Frostats for even more control on start up temperature (see page 53 of our main catalogue for a full specification) INDUSTRIAL CONTROLS & THERMOSTATS EACH 5 METRE KIT CONTAINS • 1 x 5 metre length of Trace Heat cable • 1 x Termination Kit • 1 x 2 metre length of Trace Heat cable • 1 x Termination Kit THC/PCK EACH TERMINATION KIT CONTAINS • 6 x Heat shrink sleeves [various] • 1 x Connection insulator • 2 x Wire pins [ferrules] • 1 x Pin-type cable socket • 1 x M25 Cable gland CABLE PROTECTION EACH 2 METRE KIT CONTAINS COMMUNICATIONS • Dimensions 13.6 x 5.5mm • Min installation temperature -45°C LIGHTING CONTROLS • Will not overheat or burn out, even when overlapped SIMPLY CONNECT FOR YEAR ROUND PROTECTION TV AMPLIFIERS FEATURES TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 INDUSTRIAL CONTROLS SECURITY 58 COMMAND STATIONS (IP66) O R D E R I N G D ATA C O M M A N D S TAT I O N S ( W E AT H E R R E S I S TA N T ) TIME CONTROLS DISABLED Catalogue No. Description Units SC1/50/N 10A Push-Twist Emergency Stop Switch SC1/50/NS 10A Emergengy Stop Switch with Key Release SC1/50/PFS/R 10A Red Palm/Foot Switch Station SC1/50/N SC1/50/NS each each each PRODUCT SPECIFICATION Rugged polycarbonate construction with 2 x 20mm blind threaded conduit entries. Captive quick-release cover screws. Fitted internally with 2 push switches; one N/O, one N/C. PALM OR FOOT OPERATION IP66 Rated 10A @ 600V Both SC1/50/N and SC/50/NS contain latching mechanisms (twist to reset) and comply to EN418 TV AMPLIFIERS SC1/50/PFS/R CONTROL STATIONS (IP66) O R D E R I N G D ATA CS/KMA CS/KMO AVAILABLE IN MOMENTARY IP66 OR MAINTAINED VERSIONS CS/PBR CS/DIO FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS CS/ROS C O N T R O L S TAT I O N S ( I P 6 6 ) Catalogue No. Description Units CS/KMA CS/KMO CS/ROS CS/PBR CS/DIO KRSD/F SMF Keyswitch - 2 position (maintained) Keyswitch - 2 position (momentary) Rotary ON/OFF Switch (maintained) Pushbutton Switch (momentary) - Red Double Pushbutton ON/OFF Switch Roller Shutter Door Keyswitch - 3 position (momentary) Surface Mounting Metal Frame - 1 gang each each each each each each each APPLICATIONS A range of control stations suitable for internal and external use in a wide range of applications, eg. Roller shutters, machine control. FEATURES - CS/KMA, CS/KMO FEATURES - CS/ROS • Rugged ABS enclosure with 2 x 20mm cable gland entries • Available in maintained (CS/KMA) or momentary (CS/KMO) switches • Key switch operation - 2 keys supplied • IP66 • 1 x N/O and 1 x N/C changeover switches fitted • Rated use 3A @ 230V AC • Rugged ABS enclosure with 2 x 20mm cable gland entries • Rotary (maintained) on/off switch • IP66 • 1 x N/O and 1 x N/C changeover switches fitted • Rated use 3A @ 230V AC FEATURES - CS/PBR KRSD/F • UP • OFF • DOWN • Rugged ABS enclosure with 2 x 20mm cable gland entries • Push button (momentary) switch in red or green • IP66 • 1 x N/O and 1 x N/C changeover switches fitted • Rated use 3A @ 230V AC FEATURES - CS/DIO • Rugged ABS enclosure with 2 x 20mm cable gland entries • Combined Start (I), Stop (O) push button • IP66 • 1 x N/O and 1 x N/C changeover switches fitted • Rated use 3A @ 230V AC FEATURES - KRSD/F • Max contact rating 4A @ 24V • Stainless steel front plate • Central off position and two momentary independent contacts for up/down operation • Supplied with 2 keys • Flush box supplied (use SMF for surface mounting) TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] INDUSTRIAL CONTROLS 59 SECURITY ISOLATORS ISOLATORS (IP56) PRODUCT SPECIFICATION ISO203E/N ISO204E/N ISO353E/N ISO354E/N ISO454E/N ISO634E/N I S O L AT O R S ( I P 5 6 ) 20 Amp 3 Pole Isolator (IP56) 20 Amp 4 Pole Isolator (IP56) 35 Amp 3 Pole Isolator (IP56) 35 Amp 4 Pole Isolator (IP56) 45 Amp 4 Pole Isolator (IP56) 63 Amp 4 Pole Isolator (IP56) TIME CONTROLS CAN BE PADLOCKED O R D E R I N G D ATA each each each each each each ROTARY ISOLATORS (IP65) PRODUCT SPECIFICATION LIGHTING CONTROLS IP65 TD425 TV AMPLIFIERS ISO203E/N Rugged polycarbonate construction with 6 x 20mm knockouts. Captive quick-release cover screws. Switch padlockable in two positions. Fitted with 4 pole switch block plus neutral and earth terminals. DISABLED IP56 The units have a tough polycarbonate enclosure and offer 4 x 25mm top/bottom knockouts with 2 x 20mm adapters supplied. The isolators are lockable in the off position. Self-retaining cover screws. O R D E R I N G D ATA Catalogue No. Description Units TD425 TD463 TD480 25 Amp 4 Pole Isolator 63 Amp 4 Pole Isolator 80 Amp 4 Pole Isolator each each each LOCKABLE IN TWO POSITIONS COMMUNICATIONS R O TA R Y I S O L AT O R S ( I P 6 5 ) INDUSTRIAL CONTROLS & THERMOSTATS PRODUCT SPECIFICATION A range of IP65 rated isolators with captive cover screws, a 4 x switch block contact(removable for ease of wiring) and solid connections for neutral and earth are also provided. 4 x 20/25mm knockouts. The switch is also lockable in the off position by upto 3 separate padlocks. IP65 O R D E R I N G D ATA CABLE PROTECTION The rugged polycarbonate body can only be undone in the off position R O TA R Y I S O L AT O R S ( I P 6 5 ) Description Units RI425 RI432 RI440 25 Amp 4 Pole Isolator 63 Amp 4 Pole Isolator 80 Amp 4 Pole Isolator each each each RI425 SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS LOCKABLE IN THREE POSITIONS TEST EQUIPMENT & TOOLS Catalogue No. INDUSTRIAL CONTROLS DISABLED SECURITY 60 COMBINED EMERGENCY STOP/START COMMAND STATION (SC1/SES) STOP-START O R D E R I N G D ATA COMBINED EMERGENCY STOP/START COMMAND STATION SINGLE POINT OF OPERATION each • Convenient single point of operation for both emergency stop and start functions • Rugged ABS enclosure with 2 x 20mm threaded conduit entry points • Captive, quick release cover screws • Surface mounting • Weather resistant to IP56 TIME CONTROLS TV AMPLIFIERS LIGHTING CONTROLS COMMUNICATIONS Units Combined Emergency Stop/Start Command Station FEATURES • Press to operate, twist to reset stop switch function, complies with EN418 • Push button start function • N/O and N/C changeover switches fitted for both functions • Rated 3A @ 240V AC [resistive load] SC1/SES ROLLER SHUTTER DOOR/HOIST CONTROL (CS/RSD) UP-OFF-DOWN O R D E R I N G D ATA ROLLER SHUTTER DOOR/HOIST CONTROL CONTROL STATION Catalogue No. Description Units CS/RSD Roller Shutter Door/Hoist Control each APPLICATIONS Suitable for internal and external installation for the control of roller shutter doors, electric hoists etc CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS CS/RSD TEST EQUIPMENT & TOOLS Description SC1/SES APPLICATIONS Suitable for internal and external installation for the control of industrial electrical equipment. IP56 FUSES & GENERAL PRODUCTS Catalogue No. • Rugged ABS enclosure with 2 x 20mm threaded conduit entry points • Captive, quick release cover screws • Surface mounting • Weather resistant to IP66 • Push button operation • N/O and N/C changeover switches fitted • Rated 3A @ 240V AC [resistive load] IP66 IDEAL FOR ROLLER SHUTTER DOORS OR ELECTRIC HOISTS TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] INDUSTRIAL CONTROLS 61 SECURITY RELAYS AND BASES O R D E R I N G D ATA R E L AY S Catalogue No. Price Relay Coil Voltage 8 Pin, 2 Pole. Standard 8 Pin, 2 Pole. Standard 8 Pin, 2 Pole. Standard 8 Pin, 2 Pole. Standard 8 Pin, 2 Pole. Standard 8 Pin, 2 Pole. Standard 11 Pin, 3 Pole. Standard 11 Pin, 3 Pole. Standard 11 Pin, 3 Pole. Standard 11 Pin, 3 Pole. Standard 11 Pin, 3 Pole. Standard each each each each each each each each each each each 12V DC 24V DC 12V AC 24V AC 110V AC 240V AC 12V DC 24V DC 110V AC 110V DC 240V AC Catalogue No. Description Units 8 Pin, 2 Pole. (10A) 11 Pin, 3 Pole. (10A) each each RS SERIES R E L AY B A S E S RS083N RS113N WIDE RANGE APPLICATIONS FEATURES Allows user to interface different voltage devices in an electrical system e.g. door entry • High current rating - 10A @ 250V AC/30V DC systems using maglocks. TV AMPLIFIERS 152E/12D 152E/24D 152E/12A 152E/24A 152E/110A 152E/240A 153E/12D 153E/24D 153E/110A 153E/110D 153E/240A TIME CONTROLS Units DISABLED Description 152/153 SERIES Wide range of coil voltages Standard 8 and 11 pin configurations LED indicator (relays) Manual operation button and mechanical flag indicator (relays) • Din-rail and surface mounting (bases) LIGHTING CONTROLS • • • • FIRE ALARM RELAY COMMUNICATIONS O R D E R I N G D ATA F I R E A L A R M R E L AY Catalogue No. Description Units FAR1224 Fire Alarm Relay each • Operates on either a 12V or 24V DC voltage • 12A contact rating @ 28V DC • Selectable for N/O or N/C activation • 3 screw connectors for + and - INDUSTRIAL CONTROLS & THERMOSTATS APPLICATIONS To control magnetic locks or similar devices on activation of the fire alarm system, or by activation of a dedicated switch by means of either a N/O or N/C input FEATURES FAR1224 termination wiring • Compact size 59mm x 47mm x 20mm • Adhesive mounting pad O R D E R I N G D ATA W E AT H E R R E S I S TA N T E N C L O S U R E Description Units WRE/5 WRE/6 Enclosure (300mm x 400mm x 222mm) Enclosure (350mm x 500mm x 190mm) each each IP65 LOCKABLE - WITH TWO LOCKS FEATURES • • • • • • Tough ABS construction External fixing lugs Lid sealing gasket IP65 rated WRE/5 - double door retainer and key WRE/6 - double door retainer and key WRE SERIES METAL BACK PLATE SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS APPLICATIONS Robust weather resistant enclosure with metal back plate. Allows the user a flexible method for mounting electrical equipment internally or externally, i.e. relays, transformers, batteries, etc. HINGED DOOR TEST EQUIPMENT & TOOLS Catalogue No. CABLE PROTECTION WEATHER RESISTANT ENCLOSURES CABLE PROTECTION SECURITY 62 CLEAR CABLEPROTECT 10 METRES O R D E R I N G D ATA TIME CONTROLS DISABLED FOR THE PRICE OF 9 CP5 Accepts 1 x 5mm or 2 x 4mm cables Catalogue No. Fits Cable Size CP510/CL CP910/CL CP1210/CL CP502/CL CP902/CL CP1202/CL 1 x 5mm 1 x 9mm 1 x 12mm 1 x 5mm 1 x 9mm 1 x 12mm Units or or or or or or 2 x 4mm 2 x 7mm 2 x 9mm 2 x 4mm 2 x 7mm 2 x 9mm 10m roll 10m roll 10m roll 2m pack 2m pack 2m pack APPLICATIONS Stage areas in clubs and pubs, exhibition stands, offices, shops, in the home and particularly in older commercial buildings built prior to the advent of underfloor or other cable management systems. Also useful for temporary cable runs in workshops or on construction sites. Available in grey and clear PVC, the clear version is ideally suited to use in areas where visual appearance is important. PRODUCT SPECIFICATION CP9 Accepts 1 x 9mm or 2 x 7mm cables TV AMPLIFIERS Cableprotect is formed from PVC. It is split along the length of its base to allow the material to be installed over existing installations without needing to disconnect the cables. This material has a smooth, clean, satin finish and does not exhibit any unusual, unpleasant odours (as normally associated with similar ‘rubber-like’ products). Excellent wear characteristics, abrasion resistance and tear properties, making it the perfect material for cable protection systems. CP12 Accepts 1 x 12mm or 2 x 9mm cables Cableprotect can then be nailed or glued to the floor for a permanent fixing or left unfixed if the position is temporary. Furthermore, cableprotect can be stripped off the temporary cable runs and subsequently used again. Cableprotect is available in 2 metre lengths and 10 metre rolls. The oval passage is designed for one cable in the nominal size or two smaller cables side by side. Formulated to meet REACH regulations. CABLE PROTECTION INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS CABLEPROTECT - CLEAR INTERLOCKING CABLEPROTECT O R D E R I N G D ATA INTERLOCKING CABLEPROTECT IDEAL FOR Catalogue No. Description Units INTC 915mm 1 Channel Interlocking Cableprotect each APPLICATIONS A simple, fast, drop-over cable protector for use in warehouses, offices, shopping centres, loading bays, offices, etc. FUSES & GENERAL PRODUCTS TEST EQUIPMENT & TOOLS TRAILING CABLES • • • SUITABLE FOR EXTREME TEMPERATURES • FEATURES • Simply ‘drop over’ cables for instant cable protection • Easy interlocking facility to provide virtually any length PRODUCT SPECIFICATION • Large, single channel cable capacity of 39 x 12.7mm Supplied in lengths, • Can be used on its own or with anti-slip 915 x 133 x 19mm rubber pads, supplied with each length, Single Channel Capacity of 39 x 12.7mm which simply push into position Manufactured from UV stabilised • High visibility orange colour polyurethane • Low relief, slip-resistant checker plate design Operating temperature -40°C to +48°C • Suitable for use with pedestrian traffic and momentary vehicular loads (test before use) TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] CABLE PROTECTION SECURITY CABLEPROTECT 63 O R D E R I N G D ATA CABLEPROTECT - GREY Fits Cable Size CP909/G CP1209/G CP1609/G CP502/G CP902/G CP1202/G CP1602/G 1 x 9mm 1 x 12mm 1 x 16mm 1 x 5mm 1 x 9mm 1 x 12mm 1 x 16mm Units or or or or or or or 2 x 7mm 2 x 9mm 2 x 13mm 2 x 4mm 2 x 7mm 2 x 9mm 2 x 13mm 9m roll 9m roll 9m roll 2m pack 2m pack 2m pack 2m pack DISABLED Catalogue No. CP9 TV AMPLIFIERS PRODUCT SPECIFICATION Furthermore, cableprotect can be stripped off the temporary cable runs and subsequently used again. Cableprotect is available in 2 metre lengths and 9 metre rolls. The oval passage is designed for one cable in the nominal size or two smaller cables side by side. Formulated to meet REACH regulations. CP12 Accepts 1 x 12mm or 2 x 9mm cables LIGHTING CONTROLS COMMUNICATIONS Cableprotect is formed from PVC. It is split along the length of its base to allow the material to be installed over existing installations without needing to disconnect the cables. This material has a smooth, clean, satin finish and does not exhibit any unusual, unpleasant odours (as normally associated with similar ‘rubber-like’ products). Excellent wear characteristics, abrasion resistance and tear properties, making it the perfect material for cable protection systems. TIME CONTROLS APPLICATIONS Stage areas in clubs and pubs, exhibition stands, offices, shops, in the home and particularly in older commercial buildings built prior to the advent of underfloor or other cable management systems. Also useful for temporary cable runs in workshops or on construction sites. Available in grey and clear PVC, the clear version is ideally suited to use in areas where visual appearance is important. Accepts 1 x 9mm or 2 x 7mm cables INDUSTRIAL CONTROLS & THERMOSTATS Retail Areas Exhibition Stands CABLE PROTECTION CP16 Accepts 1 x 16mm or 2 x 13mm cables TEST EQUIPMENT & TOOLS SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS Stage Areas TOOLS MULTIMETERS DM30/N DISABLED SECURITY 64 RUGGED HANDHELD UNIT TIME CONTROLS DM30/N TV AMPLIFIERS O R D E R I N G D ATA M U LT I M E T E R S Catalogue No. Description Units DM30/N MT1 Digital Multimeter Digital Multimeter each each HANDY COMPACT UNIT LARGE LCD DISPLAY FEATURES (DM30/N) FEATURES (MT1) • • • • • • • DIODE TEST LIGHTING CONTROLS COMMUNICATIONS INDUSTRIAL CONTROLS & THERMOSTATS CABLE PROTECTION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS LARGE LCD DISPLAY • Simple to use Rugged handheld unit • Large LCD display (0.5”) • Measures voltage, current and resistance • Supplied with test leads, holster and battery Compact size 130 x 70 x 28mm • Complies to EN61010-1: 2010 • Simple to use Rugged handheld unit Large LCD display (1”) Measures voltage, current, resistance, capacitance, frequency, temperature and hFE transistor gain Diode test Supplied with 9V battery, outer storage case, impact resistant holster, featuring integral folding, angled desk stand, test leads, thermocouple lead with plug termination and plug-in adaptor for use with thermocouple, capacitance and transistor gain measurements • IEC-1010 CAT II TECHNICAL SPECIFICATION Catalogue No. DM30/N DC Voltages - 5 settings to 500V DC Voltages - 5 settings to 1000V 4 DC Currents - 4 settings up to 10A 4 DC Currents - 4 settings up to 5A AC Voltages - 200V, 500V AC Voltages - 5 setings to 700V 4 Resistances - 5 settings up to 2000K ohms - 7 settings up to 200M ohms 4 _ Temperature - 200C to 10000C 4 Continuity - Buzzer sounds if low resistance < 30 ohms Diode Test 4 Capacitance - 5 settings 2ῃF to 20μF 4 MT1 4 4 4 4 < 30 ohms 4 MT1 FLEXI INSPECTION CAMERAS (CAM5) O R D E R I N G D ATA CAM5 WATERPROOF CAMERA HEAD FLEXI INSPECTION CAMERAS Catalogue No. Description Units CAM5 2.4” LCD Flexi Inspection Camera each APPLICATIONS Remote inspection of areas that are difficult to see with the naked eye, such as in pipework, cavities, loft areas, cylinder chambers and tanks and for use in laboratories, workshops etc. BUILT-IN LED CAMERA PROTECTIVE LIGHTS CARRY CASE FEATURES • 2.4” TFT LCD Screen (CAM5) • Water resistant camera head, suitable for contact with non-acidic fluids • Built-in, variable brightness LED camera lights • 1 metre (approx) flexible camera lead with 10mm dia. probe head • Video-out connection cables allow real-time viewing or video recording • Powered by 4 x AA batteries (supplied) • Housed in a protective carry case EACH KIT CONTAINS • Hand held monitor/control unit • 1m (approx) flexible probe fitted with camera • Phono TV lead • Protective carry case • USB lead (CAM6) TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] TOOLS 65 SECURITY MULTI-SIZE HOLE CUTTERS & BLADE HSO3 DISABLED HSO1 TIME CONTROLS Impact-resistant transparent cowl TV AMPLIFIERS Blade Drilling head LIGHTING CONTROLS HS SERIES O R D E R I N G D ATA M U LT I - S I Z E H O L E C U T T E R S Cat. No. Description Units each each each APPLICATIONS Recessed lighting, ceiling speakers, dry lining boxes etc. INDUSTRIAL CONTROLS & THERMOSTATS HS01/NB Multi-Size Hole Cutter. 30mm to 163mm HS03/NB Multi-Size Hole Cutter. 30mm to 260mm HSB/4D Universal Blade - Carbide Tip COMMUNICATIONS To adjust cutting thickness PRODUCT SPECIFICATION CEILING SPEAKER Model HS03/NB will cut holes from 30mm to 260mm, ideal for installers of ceiling speakers and recessed lighting. 1 x universal metal blade with carbide tip supplied. All models are fitted with a transparent cowl to collect dirt, also prevents chips from injuring user. The multi-size hole cutter can be used with either powered, variable speed hand drills or drill presses. Models come complete in carrying case and counterbalance weights to reduce vibration. SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS IDEAL FOR DOWNLIGHTERS & CEILING SPEAKERS TEST EQUIPMENT & TOOLS DOWNLIGHT Multi-size round hole cutters with adjustable radius arm, are designed for cutting holes in plywood, plasterboard and acrylic sheets up to 25.4mm thick. 50mm depth can be achieved when drilling from both sides. Aluminium, brass and metal sheets can be cut up to 1mm deep using universal cutting blade. Model HS01/NB will cut holes from 30mm to 163mm. Very popular for electricians installing downlights. 1 x universal metal blade supplied (HSB/4D). CABLE PROTECTION PROTECTIVE COWEL STOPS DUST AND DEBRIS GENERAL PRODUCTS 66 SECURITY BOLLARD LIGHTS (LB50/LB75/LB100) O R D E R I N G D ATA DISABLED BOLLARD LIGHTS LB100 - LB100S LB75 IP55 SUPER BRIGHT SON VERSION AVAILABLE 1000mm 500mm each each each each each • Attractive cast aluminium body, available in black finish • Vandal resistant fittings • Weather resistant to IP55 • Available in three heights, 500mm, 750mm and 1000mm • All 3 heights designed to accept 18W energy saving E27 lamps (not supplied) • 1000mm SON version also available with fitted control gear to accept 70W SON lamp (not supplied - use E27 elliptical with integral ignitor) • Easily secured to wood or concrete. For optimum security a ‘J’ bolt kit is available for fixing in unset concrete (ERL Cat No. LBJB) O R D E R I N G D ATA TRANSFORMER IDEAL FOR BELL TRANSFORMER APPLICATIONS INDUSTRIAL CONTROLS & THERMOSTATS CABLE PROTECTION Units 500mm Black E27 Bollard Light 750mm Black E27 Bollard Light 1000mm Black E27 Bollard Light 1000mm Black 70W SON Bollard Light ‘J’ Bolt Kit for fixing in soft concrete TRANSFORMER - MULTIVOLT COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS LBJB Catalogue No. Description Units T4812/N Multivolt Transformer each T4812/N FEATURES • 1A rating at 12V AC • Easy to Install • Self resetting overload protection • 4, 8 and 12V output • Surface Mounting • Double insulated T E C H N I C A L S P E C I F I C AT I O N T4812/N Cat. No. T4812/N Height Width (mm) (mm) 81 57 Depth (mm) 43 Input Voltage Output Voltage 230V AC 4V @ 2A, 8V @ 1.5A, 12V @ 1A POWER SUPPLY IN-LINE SWITCH-MODE GREATER EFFICIENCY & LOWER HEAT GENERATION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS Description LB50 LB75 LB100 LB100S LBJB APPLICATIONS Ideal for security or general ambient lighting in car and vehicle parks, patios, courtyards, foyers and driveways. FEATURES TOUGH HOUSING 750mm TIME CONTROLS LB50 Catalogue No. O R D E R I N G D ATA I N - L I N E S W I T C H - M O D E P O W E R S U P P LY Catalogue No. Description Units PS1A25SM12 1.25A 12V In-line Switch-Mode Power Supply each APPLICATIONS For use with a variety of products that require a DC voltage of 12V either using the adaptor plug or wiring directly to the product FEATURES PS1A25SM12 • Switch-mode type of power supply which offers greater efficiency and lower heat generation • 1.25 Amp regulated output • 12V DC output voltage • Fitted with approx 420mm mains lead, 3A fused BS1362 plug and approx 820mm flylead with moulded plug TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] GENERAL PRODUCTS 67 NEW SWITCH MODE VERSIONS O R D E R I N G D ATA SECURITY POWER SUPPLIES S E C U R I T Y P O W E R S U P P LY W I T H B AT T E R Y B A C K - U P Description Units PS12/1 PS12/2 PS12/3 PS12/5 PS5A/12V PS24/1BB PS24/1 1 Amp 12V (13.8V) DC Switch Mode Power Supply 2 Amp 12V (13.8V) DC Switch Mode Power Supply 3 Amp 12V (13.8V) DC Switch Mode Power Supply 5 Amp 12V (13.8V) DC Switch Mode Power Supply 5 Amp 12V (13.8V) DC Switch Mode Power Supply 1 Amp 24V (27.6V) DC Switch Mode Power Supply 1 Amp 24V DC Power Supply-No Battery Back-Up each each each each each each each LED DISABLED Catalogue No. TO SHOW STATUS • All units (excl PS24/1) offer an additional reserve capacity for trickle charging the back-up battery 7AH max (not supplied) • Full load current at high ambient temperature (+40°C) • Mains present and fault/fuse blown LED indicators • Short circuit and mains transient protection • Suitable for wall mounting, enclosure incorporates knockouts Dimensions (mm) 250x215x80 250x215x80 250x215x80 330x330x80 225x195x80 330x275x80 250x215x80 Catalogue No. Description Units MPSD312/N Regulated DC Power Supply each APPLICATIONS Suitable for powering a wide variety of DC voltage products, either using the adaptor plugs or by wiring directly to the product. USE WITH ADAPTORS OR CAN BE HARD WIRED MPSD312/N EACH KIT CONTAINS 2250mA regulated output Switchable 3, 4.5, 5, 6, 7.5, 9, 12V DC output voltages Fitted input and output leads Reversible polarity Indicator LED Can be hardwired Fitted with moulded plug • In line power supply • Adaptor plugs (6) • Fitted 13A plug 3, 4.5, 5, 6, 7.5, 9 AND 12V DC REGULATED MULTI VOLTAGE CABLE PROTECTION • • • • • • • 2.25A OUTPUT O R D E R I N G D ATA U N I V E R S A L P L U G - I N P O W E R S U P P LY Catalogue No. Description Units PS312 Universal Plug-in Power Supply each 7 selectable output voltages - 3, 4.5, 5, 6, 7.5, 9, 12V DC Supplied with 6 types of output lead connectors 600mA regulated output Reversible polarity Indicator LED REGULATED UNIVERSAL PLUG-IN MULTI VOLTAGE 3, 4.5, 5, 6, 7.5, 9 AND 12V DC SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS • • • • • PS312 TEST EQUIPMENT & TOOLS PS312 APPLICATIONS For use with low power products i.e. radios, stereos, calculators, clocks, small toys etc. FEATURES INDUSTRIAL CONTROLS & THERMOSTATS FEATURES AVAILABLE WITH UPTO 5 AMP RATING COMMUNICATIONS O R D E R I N G D ATA M U LT I V O LTA G E D C P O W E R S U P P LY SUITABLE FOR ELECTRIC LOCKS, DOOR ENTRY SYSTEMS & ACCESS CONTROL LIGHTING CONTROLS TECHNICAL SPECIFICATION Regulated Amperage Output Voltage 1 13.8V DC 2 13.8V DC 3 13.8V DC 5 13.8V DC 5 13.8V DC 1 27.6V DC 1 (Unregulated) 22-30V DC Catalogue No. PS12/1 PS12/2 PS12/3 PS12/5 PS5A/12V PS24/1BB PS24/1 PS12 SERIES TV AMPLIFIERS • All PS12 models and PS24/1BB are switch mode power supplies, offering greater efficiency, lower heat generation and lower power consumption TIME CONTROLS APPLICATIONS High quality power supplies for use with security and access control equipment. FEATURES GENERAL PRODUCTS PUMP SUBMERSIBLE 550W PASSES DEBRIS PUMPS UP TO 9500 LITRES UP TO 35mm DIAMETER PER HOUR IP68 TV AMPLIFIERS TIME CONTROLS DISABLED SECURITY 68 SPV550 COMMERCIAL USE CABLE PROTECTION TEST EQUIPMENT & TOOLS FUSES & GENERAL PRODUCTS Catalogue No. Description Units SPV550 Submersible Pump 550W each FEATURES APPLICATIONS • • • • • • • Commercial Cellars Pools Garden ponds Anywhere water needs to be removed Agricultural Garden Centres Power supply Power consumption Delivery rate max. Delivery height max. Immersion depth max. Water temperature max. Hose connection Foreign bodies up to Switching point high: ON Switching point high: OFF • • • • • • • • • Easy to plug in Pumps dirty or clean water Passes particles up to 35mm diameter Automatic ON/OFF Floating Switch Robust Low maintenance IP68 rated Integral carry handle 10m mains lead with 3-pin plug TECHNICAL DATA 230V AC 550 Watt 9500 l/h 7m 8m 35˚C 25/32mm dia with threaded end dia. 35mm Approx. 35cm Approx. 5cm SPACE HEATERS - COMMERCIAL O R D E R I N G D ATA C O M M E R C I A L S P A C E H E AT E R S ROBUST Catalogue No. EK2001 Description Units 2kw fan heater each METAL BODY INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS IDEAL FOR O R D E R I N G D ATA SUBMERSIBLE PUMP 550W RAPID FAN ASSISTED HEATING FOUR EK2001 THERMAL PROTECTION CUT-OUT SETTINGS 2kw OUTPUT APPLICATIONS Ideal for quickly heating indoor areas in workshops, garages, factories, warehouses and similar applications. PRODUCT SPECIFICATION: Operational Voltage: 230V – 50Hz Dimensions: 215 x 195 x 320mm FEATURES • Rapid fan assisted heating • Robust steel construction with insulated carrying handle. • Adjustable heat output with 4 settings : 2kw – OFF, 650W ouput, 1.3kw output and full power (2kw) • Fitted with a stepless variable thermostat to maintain the room temperature at a predetermined level • Self-resetting thermal protection cut-out to prevent overheating • Heavy duty heater elements and metal bladed fan • 1.75m cable and plug TECHNICAL ADVICE - MONDAY TO THURSDAY TEL 01923 220277 EMAIL [email protected] GENERAL PRODUCTS O R D E R I N G D ATA C O N T R A C T O R F U S E PA C K Cat No. Description Units CFP Contractor Fuse Pack each 18 DIFFERENT TYPES OF FUSE DISABLED APPLICATIONS Storage box with spill proof latches, ideal for Electrical/Electronics engineers who need a selection of commonly used fuses. EACH KIT CONTAINS SECURITY FUSE CONTRACTOR PACK TIME CONTROLS 10 of each of the following fuses: • Plug Fuses: 3A, 5A, 13A (manufactured to comply with BS.1362) • Glass Anti Surge: 1A, 1.25A, 1.6A, 2A,2.5A, 3.15A, 5A, 6.3A, 10A (20mm x 5mm) (manufactured to comply with BS.EN60127, IEC127) • Glass Quick Blow: 500mA, 1A, 2A, 2.5A, 3.15A, 5A (20mm x 5mm) (manufactured to comply with BS.EN60127, IEC127) CFP O R D E R I N G D ATA GF520T FUSES GF520F/500 GF520F/1A - 10 10 - GF520F/2A GF520F/2A5 GF520F/3A15 GF520F/5A GF520F/6A3 - 10 10 10 10 10 - 20 x 5mm Anti-Surge Glass Pack size GF520T/500 GF520T/1A GF520T/1A25 GF520T/1A6 GF520T/2A GF520T/2A5 GF520T/3A15 GF520T/5A GF520T/6A3 GF520T/8A GF520T/10A 10 10 10 10 10 10 10 10 10 10 10 GF520F Actual size 20 x 5 mm COMMUNICATIONS Pack size Packs of 1000 available (POA). Manufactured in accordance with BS-EN60127, IEC 127. Other ratings to order. (Minimum quantity 1,000 Bulk) O R D E R I N G D ATA DOMESTIC CONSUMER UNIT FUSES CUF15 Description Dimensions (mm) Units CUF15 CUF20 CUF30 15A Fuse Link 20A Fuse Link 30A Fuse Link 26 x 10.32 Ø 26 x 10.32 Ø 29 x 12.7 Ø per 10 per 10 per 10 CUF20 CARTRIDGE FUSES (BS1362) CARTRIDGE FUSES Cat. No. Rating PF3/1000 PF3/1000 PF5/1000 PF13/1000 3A 5A 13A Units per 1000 per 1000 per 1000 PF13/1000 SALES ORDERS TEL 01923 255344 EMAIL [email protected] FAX 01923 255829 FUSES & GENERAL PRODUCTS PLUG FUSES The comprehensive range of cartridge fuses complies with BS1362 and are ASTA approved. Rated Voltage: 240 AC PF5/1000 TEST EQUIPMENT & TOOLS O R D E R I N G D ATA CABLE PROTECTION CUF30 1000 Fuses (1 bag of 1000) INDUSTRIAL CONTROLS & THERMOSTATS CONSUMER UNIT FUSES (BS1361) Catalogue No. LIGHTING CONTROLS 500mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A5A 6.3A 8A 10A 20 x 5mm Quick-Blow Glass TV AMPLIFIERS ELECTRONIC FUSES Rating 69 INDUSTRIAL CONTROLS & THERMOSTATS COMMUNICATIONS LIGHTING CONTROLS TV AMPLIFIERS TIME CONTROLS DISABLED SECURITY INDEX SECURITY Pages 2 - 30 DOOR ENTRY SYSTEMS AUDIO / CODED ACCESS / PROXIMITY / VIDEO DOOR RELEASE LOCKS DOOR RELEASE SWITCHES DOOR RETAINERS ASSISTANCE SYSTEMS ENTRY ALERT SYSTEMS BEAM KITS EMERGENCY EQUIPMENT ALARMS / CONTROLS PRESSURE MATS DISABLED Pages 31 - 34 ELECTRIC DOOR OPENING/CLOSING SYSTEM DOOR RELEASE SWITCHES ASSISTANCE SWITCHES TOILET ALARM SYSTEMS INDUCTION LOOP SYSTEMS TIME CONTROLS Pages 35 - 40 IMMERSION HEATER/LIGHTING TIMESWITCHES SOLAR TIMESWITCHES DIGITAL TIMESWITCHES ANALOGUE TIMESWITCHES ENERGY MEASUREMENT METERS STAIRCASE LIGHTSWITCHES COMMERCIAL TIMESWITCHES CLOCKS RADIO CONTROLLED / COMMERCIAL AMPLIFIERS / DISTRIBUTION Pages 41- 44 DISTRIBUTION AMPLIFIERS DISTRIBUTION SYSTEMS TV/DATA DISTRIBUTION SYSTEMS CAT 5E PATCH PANELS WALL PLATES TRACE HEATING CABLE COMMAND STATIONS EMERGENCY STOP/START CONTROL STATIONS ISOLATORS ROLLER SHUTTER DOOR CONTROL RELAYS & BASES FIRE ALARM RELAYS ENCLOSURES WEATHER RESISTANT LIGHTING CONTROLS Pages 45 - 51 PIR MOTION CONTROLS / DETECTORS PHOTO ELECTRIC CONTROLS KEY CARD ENTRY/ENERGY CONTROL KITS KEY CARD SWITCHES DIMMER SWITCHES SLIDE/TOUCH/REMOTE CONTROL ROPELIGHT LED/FLEXIBLE COMMUNICATIONS Pages 52 CABLE PROTECTION Pages 62 - 63 CABLE PROTECT GREY/CLEAR TEST EQUIPMENT & TOOLS Pages 64 - 65 FLEXI INSPECTION CAMERAS HOLE CUTTERS MULTIMETERS INTERCOM SYSTEMS THERMOSTATS / HEATING & INDUSTRIAL CONTROLS Pages 53 - 61 FROSTATS THERMOSTATS CYLINDER/PIPE/DIGITAL/ RADIO CONTROLLED CENTRAL HEATING PROGRAMMERS THERMOSTATS FUSES AND GENERAL PRODUCTS Pages 66 - 69 POWER SUPPLIES FUSES FUSE PACKS BOLLARD LIGHTS TRANSFORMER PUMP SUBMERSIBLE HEATER All goods sold subject to Standard Conditions of Sale. Our policy is one of continuous improvement and we reserve the right to alter product specifications in this catalogue. All information in this catalogue is given in good faith and believed to be correct at the time of publication January 2017. Prices shown exclude VAT and are subject to change without notice. E & O.E. © COPYRIGHT OF ELECTRO-REPLACEMENT LIMITED 2017 TEST EQUIPMENT & TOOLS CABLE PROTECTION Sales Orders Tel: 01923 255344 ELECTRO-REPLACEMENT LIMITED 1 Moor Park Industrial Centre, Tolpits Lane, Watford, Herts WD18 9EU Email: [email protected] Fax: 01923 255829 Technical Advice Service Monday to Thursday Tel: 01923 220277 Email: [email protected] FUSES & GENERAL PRODUCTS Website: www.electroreplacement.com Visit our website for more information