Transcript
®
FLASHWAVE 4 1 0 0
Indoor Wall Mount (IWM) Cabinet
Turnkey Cabinet Solutions for the Customer Premises With the FLASHWAVE® 4100 Indoor Wall Mount (IWM) optical transport cabinet and battery back-up power cabinet, you can provide cost-effective, next-generation optical, TDM and Ethernet services to the customer premises. The FLASHWAVE 4100 IWM cabinet architecture is a turnkey, space saving solution to offer to your customers. It features compact and versatile enclosures for quickly installing the FLASHWAVE 4100 multiservice optical access platform and built-in safeguards for equipment security.
• Flexible Design • Cost Effective • Secure Enclosure • Quick Installation
Customer Premises Cabinet Solutions
Battery Enclosure Provides Power Safety and Security Fujitsu offers maximum security from loss of commercial power and loss of customer service by including a battery cabinet enclosure as an integral part of the IWM architecture. This power cabinet provides power to the transport cabinet, and maintains customer service in the event of a commercial power outage. The battery back-up provides 63 amp hours to maintain a minimum of eight hours reserve power. The battery and transport cabinets are also secure, lockable and wall mountable.
IWM Versatility at the Customer Premises
Cabinets Feature Two Modes of Operation
The IWM optical transport cabinet has everything you need to bring high-value services to your customers including: • Flexibility to accommodate multiple optical, TDM and Ethernet configurations • Compact design for easy integration at the customer premises • Lockable front cabinet door to ensure equipment security • Minimal installation investment for low entry-to-market cost • Simple installation and turn-up for quick time-to-market
The DC power mode involves deploying only one cabinet. It uses an existing –48 volt source provided by SBC or the customer. This cabinet houses a fuse and alarm panel and the FLASHWAVE 4100 small shelf.
Best of all, you can deliver exceptional optical transport services to your customers at their locations and protect your equipment investment at the same time by using the cabinet’s secure and compact enclosures.
Multiple Configurations in One Secure Enclosure The versatile IWM optical transport cabinet delivers all types of services to meet your customers’ demands. These services range from OC-3 and OC-12 back to the Central Office (CO) while simultaneously providing DS1, DS3 and Ethernet services to the customer.
If you are deploying in the AC power mode, two cabinets are required. In this configuration, one cabinet houses the AC/DC rectifier and the FLASHWAVE 4100 small shelf. The other cabinet houses the batteries. The two cabinets may be mounted either horizontally or vertically, with minimal constraints.
Solutions to Match Your Specific Needs Our flexible design and engineering allows for quick and efficient installation to your customer’s end site. These cabinets will help you deliver optical transport services to your customer’s door with adaptable solutions that match your complex requirements.
®
FLASHWAVE 4 1 0 0
Indoor Wall Mount (IWM) Cabinet
Customer Premises Cabinet Solutions
Features and Specifications Architectures
Synchronization
Valere Power Rectifier
• Terminal • Unidirectional Path Switched Ring (UPSR)
• Internal Stratum 3 clock • Synchronization Status Messaging (SSM) • Line timing • DS1 BITS clock output
• CI18S-ANN-VC rectifier shelf • Two Valere V0250A-VC 5 amp rectifier modules • One 10’ 12/3 AC cord with 110 V AC/15 amp NEMA L5-15P twist lock plug • Two 10 amp circuit breakers to feed the FLASHWAVE 4100 small shelf • One 20 amp circuit breaker for the Avestor battery
Configurations • DS1 • DS3/EC1 • OC-3 • OC-12 • Ethernet
64-pin & 36-pin AMP® connectors BNC connectors SC connectors, 1310 nm SC connectors, 1310/1550 nm 10/100Base-T RJ-45 connectors
Maximum Number of Line/Service Interfaces 8 interface slots (2 line side slots and 6 service drop slots) Service Drop Types Ports/ Unprotected Protected Card Ports/Shelf Ports/Shelf • DS1 14 42 • DS3/EC-1 3 6 • OC-3 1 6 3 • Ethernet 4 24 -
Operations • TL1 protocol over X.25, OI/LCN or IP/LCN • SNMP over X.25 gateway functionality • RS-232 craft interface • Software download and remote memory backup/restore • FLEXR® GT craft interface support • NETSMART® 1500 EMS support • Interoperable with all Fujitsu transmission products • Telcordia OSMINE compliant • Four housekeeping inputs
Power Consumption/Heat Dissipation • Power Consumption (OC-3) • Power Consumption (OC-12)
91 W/310 BTU 99 W/338 BTU
Switching • Flexible any-port-to-any-port Time Slot Interchange (TSI) • 42 x 42 STS-1 TSI (OC-3) • 60 x 60 STS-1 TSI (OC-12) • 1176 x 1176 VT1.5 TSI (OC-3) • 1680 x 1680 VT1.5 TSI (OC-12)
Protection Line Side • OC-3 • OC-12 Drop Side • DS1 • DS3 • EC1 • OC-3 • 10/100Base-T
UPSR, point-to-point (0:1, 1+1) UPSR 1:1 or unprotected 1:1 or unprotected 1:1 or unprotected 0:1, 1+1 0:1
Fujitsu Network Communications Inc. 2801 Telecom Parkway, Richardson, TX 75082 Tel: 800.777.FAST Fax: 972.479.6900 us.fujitsu.com/telecom
SBC Ordering Information • AC powered Cabinet PCD PCD1B510-0077-A001 • AC powered SBC Cabinet PID 301142154 • DC powered Cabinet PCD PCD1B510-0077-A002 • DC powered SBC Cabinet PID 301164208 • Both the PCD & PID numbers order both cabinets • GMT Fuse Expansion Kit PCD48550-0001-C001 • GMT Fuse Expansion Kit PID310091434 • Cabinet install procedures SBC-002-217-201 sect. 10.1 • Avestor battery SE48S63-002 • SBC Battery PID 301125753
Operating Environment
Customer Requirements
• Temperature 0 to 50° C (32 to 122° F) • Humidity 5 to 95% (non-condensing) • Extended temperature operation (except Ethernet) • NEBS Level 3 compliant • Open door alarm
• Provide 110 V AC to mounted twistlock outlet • Provide one L5-15R 110 V AC/15 amp twistlock outlet • Mount 3/4" plywood board to support both cabinets
Cabinet Physical Characteristics • Dimensions (H x W x D) 20 x 21 x 14" Cabinet 1 • Houses the FLASHWAVE 4100 small shelf, fan and 110 V AC/–48 V DC power rectifier Cabinet 2 • Houses battery only for –48 V DC via power rectifier • SBC standard CPE configuration provides both cabinets per SBC PID number
Features and specifications are specific to AT&T and are subject to change without notice.
© Copyright 2006 Fujitsu Network Communications Inc. All Rights Reserved. NETSMART®, FLEXR®, and FLASHWAVE® and (and design)™ are trademarks of Fujitsu Network Communications Inc. (USA). FUJITSU (and design)® and THE POSSIBILITIES ARE INFINITE™ are trademarks of Fujitsu Limited. All other trademarks are the property of their respective owners. 1.0/01.06/PDF ATTSOUTHWEST
