Transcript
HERRENKNECHT VERTICAL GMBH
TERRA INVADER 350 / 4 50 SLINGSHOT
F LEXI B LE A N D FA S T I N S TA L L AT ION AL SO IN RE MOT E ARE A S : D EEP DR I L L I N G R I G T E R R A INVADE R 3 5 0 /4 5 0 SL INGSHOT. Slingshot substructure and self-erecting telescoping mast allow easy and safe rig up Push and pull capability Semi-automatic pipe handling system (hands-off-technology) Easy and safe casing operations Sophisticated noise-protection system Made in Germany
DEE P DR I LLI N G R I G T E R R A I NVADE R 3 5 0 /4 5 0 SL INGSHOT. TECH N I C AL S P E C I F I C AT I O N S . R I G P O W E R S U P P LY *
DRILLER’S CABIN*
Max. hook load TI-350:
HOOK LOAD 350 mt (385 sht)
Hydraulic power unit:
Max. hook load TI-450:
450 mt (500 sht)
Generator set
Controls:
MAST* Type: Height (erected):
Max. power diesel engine:
1,232 kW (1,650 hp)
Max. power generator:
1,540 kVA
Emergency supply unit telescopic twin profile
Emergency power diesel engine:
600 kW (800 hp)
46 m (150 ft)
Emergency power generator:
715 kVA
Hydraulic auxiliary unit:
90 kW (120 hp)
Compressed air power unit:
2x 30 kW (2x 40 hp)
SUBSTRUCTURE* Type:
slingshot
Height:
9 m (30 ft) rig floor plus 3 m (10 ft) windwalls
Clear height below RT:
8.2 m (27 ft)
BOP handling:
2 x 25 mt (2 x 28 sht)
Rigfloor dimensions:
9 m x 10 m (30 ft x 33 ft)
CYLINDER HOISTING SYSTEM Type:
double cylinder system
Hoist power:
1,600 kW (2,200 hp)
Brake:
hydraulic lowering brake valves
Stroke:
22 m (72 ft)
Ultra-sensitive operation due to multi-valve hydraulic control. TOP DRIVE*
The rig can be operated with: a. power from the grid b. power from the generator sets c. generator supported grid power a. and c. require an additional medium voltage switchgear unit.
PIPE HANDLING SYSTEM* Drive:
hydraulic
Operating range:
73 mm (2 7/8 ”) to 620 mm (24 1/2 ”)
Lifting capacity:
4.5 mt (5 sht)
Max. tripping speed:
600 m/h (1,920 ft/h)
The complete pipe handling system is designed to handle drill pipe range 2 in doubles, drill collars and casing. The controls are semi-automated and the system is operated by the pipe handling operator or the driller. An integrated anti-collision system ensures a safe pipe handling process during all operations.
AUXILIARY CRANE Type:
PK 32080 M
R O TA RY TA B L E *
Drive:
hydraulic
Table opening:
953 mm (37 1/2 ”)
Lifting moment:
298,000 Nm (220,000 ft-lbs)
Max. static load:
450 mt (500 sht)
Max. lifting capacity:
8.5 mt (10 sht)
Max. dynamic load:
350 mt (385 sht)
Slewing angle:
400 degrees
Drive:
hydraulic
The auxiliary crane mounted on the rig floor can be steered by a wireless remote-control panel and has a maximum reach of 12.2m.
HV TD H 500–1000
Max. static load:
450 mt (500 sht)
Max. push load:
160 mt (175 sht)
Max. rotary speed:
220 rpm at 27,500 Nm (20,300 ft-lbs)
Max. continuous rotary torque:
62,000 Nm (45,500 ft-lbs) at 97 rpm
Max. brake torque (intermittent):
100,000 Nm (73,750 ft-lbs)
Max. operating pressure: 350 bar to 517 bar (5,000 psi to 7,500 psi)
Link tilt capacity:
4 mt at 1.5 m (8,820 lbs at 4.92 ft)
Rated power:
800 kW (1,000 hp)
Max. input power:
800 kW to 1,600 kW (1,000 hp to 2,200 hp)
Drive:
AC or DC (water- or air-cooled)
HERRENKNECHT VERTICAL GmbH Im Heidenwinkel 5 D-77963 Schwanau Phone +49 7824 302-1300 Fax +49 7824 302-1330
[email protected] www.herrenknecht-vertical.com
joystick, trackball and touch screen with camera control
Power control center
Type:
Including IBOP, pipe handler, integrated swivel with quill and dolly with torque pick-up.
03.2015 | HK2159
4 x 500 kW (4 x 670 hp)
OPTIONAL EQUIPMENT Iron roughneck / manual rotary tongs Power slips / slip lifter / manual slips
MUD PUMP UNITS Make:
Schäfer & Urbach / Herrenknecht Vertical
Type:
high pressure triplex mud pump
The mud pump units are tailored to customer requirements.
Elevators Auxiliary winch BOP / BOP closing unit Medium voltage switchgear unit Mud tank system Drill string
* Components manufactured by Herrenknecht Vertical
