Transcript
FLEXIBLE WIRING DUCT SECURE AND PROTECTED CABLE MANAGEMENT
NEAT CABLE MANAGEMENT UP TO WORKSTATION
• Orderly separation of data cables and power cables • Easy subsequent fitting of additional cables • Easy to expand – just click in place • High strength • Free of halogen
FLEXIBILITY THANKS TO FUNCTIONAL ACCESSORIES
FLEXIBLE WIRING DUCT The tread-proof flexible wiring duct has a dual-chamber system that allows mains cables and data cables to be managed in an orderly and separate manner. The length of the duct can be individually adjusted by removing or adding individual elements of the flexible wiring duct system.
ANGLE PIECES FOR FLEXIBLE WIRING DUCT The angle pieces in the flexible wiring duct system enable cables to be run exactly vertically from the floor to the desk, for instance, to hook up a workstation.
CABLE PASSAGE The round cable passage for raised floors with direct connection to the flexible wiring duct provides a seamless, safe and protected transition of cables from raised floors into the flexible wiring duct.
T-PIECE FOR FLEXIBLE WIRING DUCT With this T-piece, you can create a seamless tap-off for the flexible wiring duct. Thanks to an additional optional transitional ring, the T-piece can also be used as a cable passage for raised floors.
FLOOR RAIL FOR FLEXIBLE WIRING DUCT The floor rail can be attached to the floor and has a ramp on both sides for holding the flexible wiring duct and fixing it in place. This reduces the tripping hazard and makes it much easier to clean the floor.
APPLICATIONS
WIRING IN THE WORKPLACE Using the floor passage for the flexible wiring duct, you can connect the fixed installation all the way to the workstations in a seamless, decentralized arrangement – no more tangled cables and tripping hazards. Thanks to the reliable two-chamber system, you can run power cables and data cables in the duct neatly and separately. You can subsequently lengthen or shorten the flexible wiring duct quite easily by adding or removing individual elements. SUBSEQUENT DRAW-IN OF CABLE The individual elements of the flexible wiring duct have fins with slots. This feature allows the subsequent installation of cables and lines in the duct in an installed, connected state. This installation work can be done with the flick of a wrist and without arduous thread-in procedures.
FLOOR RAIL The optional floor rail makes the flexible wiring duct tread-proof and trip-proof and can be used wherever greater safety is needed. It also enables the duct to run straight, e.g. along a wall.
CABLE PASSAGE The optional cable passage for raised floors with flexible wiring duct connection allows lines to be run from the raised floor directly into the protective flexible wiring duct. The optionally available T-shaped cable passage enables the branching off of the flexible wiring duct at the point immediately after the lines emerge from the raised floor.
ACCESS POINT Access points are generally installed close to printer point and are optimally connected with the flexible wiring duct. Orderly cable management from floor level to work level prevents unattractive cable tangles and unintended disconnection of cables, e.g. by cleaning personnel getting caught in cables.
FREE FROM CABLE TANGLES AND TRIPPING HAZARDS The flexible wiring duct provides ideal cable management in offices or wherever cables have to be laid in an orderly and protected manner. You need no tools at all to put together or take apart the individual elements, to create rigid sections by clipping them together and to change fixed areas into movable ones again by pulling them apart. If you wish to put cables into the flexible wiring duct subsequently, you simply press them into place.
Printed in Switzerland in a climate-neutral manner – Climate Partner ID: 10998-1410-1001
www.reichle.com/flexkanal
Reichle Installation Technologies AG Buchgrindelstrasse 7, CH-8620 Wetzikon, Switzerland T +41 44 931 98 00, www.reichle.com
