Transcript
Omnitron Systems Technology, Inc.
............................................................................................................ FlexPointTM 100Fx/Tx Fast Ethernet Fiber to Copper Media Converters
[SC]
[ST]
FEATURES n
The FlexPointTM 100Fx/Tx is a Fast Ethernet fiber to copper twisted pair (UTP) converter. It supports the IEEE 802.3 100Base-Fx and 100Base-Tx standards.
n
Connects switches, hubs and workstations via fiber.
n
Auto-senses half-duplex (HD) or full-duplex (FD) operation to maximize data transfer speed and distance between connected devices.
n
Supports multimode (MM) or single-mode (SM) fiber, and SC, ST, VF-45 or MT-RJ connector types.
n
Supports EIA/TIA 568 RJ45 category 5 wiring and features a crossover switch for convenient uplinks.
n
Supports up to 412 m (1,350 ft.) in half-duplex (all fibers), up to 2 km (1.2 mi.) in full-duplex multimode fiber and up to 110 km (68 mi.) in fullduplex single-mode fiber.
n
Wall-mountable or rack-mountable on a 5-unit shelf or in the power-redundant FlexPoint Powered Chassis.
n
Software-independent.
n
Lifetime warranty.
[VF-45]
[MT-RJ]
DESCRIPTION The FlexPointTM 100Fx/Tx converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types. The FlexPoint 100Fx/Tx is a Fast Ethernet 100Base-Fx fiber to 100Base-Tx unshielded twisted pair (UTP) converter. It supports auto-negotiation for half-duplex and full-duplex operations and supports a variety of fiber options. The FlexPoint 100Fx/Tx auto-adapts to the highest level of performance supported by the device connected to the UTP port. When the device is a switch or a workstation that supports full duplex, the FlexPoint 100Fx/Tx adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that only supports half duplex, the FlexPoint 100Fx/Tx adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation. The FlexPoint 100Fx/Tx fiber operates at 1550 nm and uses SC, ST, VF-45 or MT-RJ connectors. Multimode models that support distances of up to 2 km and single-mode models that support distances of up to 110 km are available.
Omnitron Systems Technology, Inc. • 27 Mauchly #201 • Irvine, CA 92618 • 949.250.6510 tel. • 949.250.6514 fax • www.omnitron-systems.com
The FlexPoint 100Fx/Tx UTP port uses a modular EIA/TIA 568 RJ45 connector that supports category 5 wiring and supports distances of up to 100 m (328 ft.). It features a crossover switch that facilitates a straight-through cable connection to a workstation or a hub and eliminates the need for a crossed cable. The FlexPoint 100Fx/Tx provides diagnostic data through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, the modes of operation, the detection of devices and data being received by each port. The FlexPoint offers several mounting options. The converter can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit shelf or in a high-density, 14-unit, dual power-redundant Powered Chassis.
SPECIFICATIONS n n
n
n
SAMPLE APPLICATIONS The following two pictures depict the FlexPoint 100Fx/Tx in several applications. In case (a) a hub is connected via a non-bridged half-duplex uplink port to a switch. This type of application is limited in its distance due to the collision domain timing constraints. Case (b) is a preferred alternative which uses a bridged full-duplex uplink port and is capable of driving long distances. Case (c) depicts a full-duplex connection between two switches, and case (d) depicts a full-duplex connection of a workstation to a switch.
n
n n n n
Protocol: Connectors and Cables: Twisted Pair UTP: Fiber: Multimode: Single-Mode: Supported Distances: Twisted Pair UTP: Multimode: Single-Mode, Standard: Single-Mode, Extended: Single-Mode, XLH: Single-Mode, SLH: Indicators: Power: Auto-Negotiation: Full-Duplex: Half-Duplex: Fiber Link / Receive: Fiber Error: UTP Link / Receive: UTP Error: Switches: UTP Crossover: UTP Auto-Negotiation: Duplex Mode: Dimensions / Weight: Power: Temperature: Humidity:
IEEE 802.3, 100Base-Fx, 100Base-Tx RJ45, Category 5 (EIA/TIA 568) SC, ST, VF-45 or MT-RJ 50/125, 62.5/125, 100/140 µm 9/125 µm Half-Duplex Full-Duplex 100 m / 328 ft. 100 m / 328 ft. 412 m / 1,350 ft. 2 km / 1.2 mi. 412 m / 1,350 ft. 28 km / 16.8 mi. 412 m / 1,350 ft. 58 km / 36 mi. 412 m / 1,350 ft. 85 km / 52 mi. 412 m / 1,350 ft. 110 km / 68 mi. LED, Yellow, power applied LED, Green, Auto-Negotioation enabled LED, Green, Full-Duplex selected LED, Green, Half-Duplex selected LED, Green, Link / data received LED, Red, data errors detected on fiber LED, Green, Link / data received LED, Red, data errors detected on UTP Straight / Crossed Auto-Negotiation / Manual Full-Duplex / Half-Duplex W:3.0”xD:4.0”xH:1.0” / 6 oz. 9 VDC / 500 mA or 5 VDC / 750 mA 0 to 40 degrees C 0-90% (non-condensing)
ORDERING INFORMATION Model 4330-x 4331-x 4332-x 4333-x 4334-x 4335-x 4336-x 4337-x 4338-x 4350-x 4351-x
Description FlexPoint 100Fx/Tx, MM, SC, 1300 nm FlexPoint 100Fx/Tx, SM, SC, 1300 nm FlexPoint 100Fx/Tx, MM, ST, 1300 nm FlexPoint 100Fx/Tx, SM, ST, 1300 nm FlexPoint 100Fx/Tx, SM, SC, 1300 nm, Extended FlexPoint 100Fx/Tx, SM, ST, 1300 nm, Extended FlexPoint 100Fx/Tx, MM, MT-RJ, 1300 nm FlexPoint 100Fx/Tx, SM, MT-RJ, 1300 nm FlexPoint 100Fx/Tx, MM, VF-45, 1300 nm FlexPoint 100Fx/Tx, SM, XLH, SC, 1550 nm FlexPoint 100Fx/Tx, SM, SLH, SC, 1550 nm Power options (-x): -0 No power adapter included (chassis module) -1 110 Volt / 60 Hz -2 230 Volt / 50 Hz For other power configurations, consult factory.
4380 4384 4385 4389 4392 4395 4399
Trademarks are owned by their respective companies. FlexPoint is a trademark of Omnitron Systems Technology, Inc. Specifications subject to change without notice. ©1998-2001 Omnitron Systems Technology, Inc.
091-04330-001 1/01
FlexPoint Wall-Mounting Hardware Kit FlexPoint 1-Unit 18-60VDC Power Adapter FlexPoint 14-Unit 48VDC Power-Redundant Powered Chassis Redundant Power Supply for Model 4385 FlexPoint 5-Unit Rack-Mounting Shelf FlexPoint 14-Unit AC Power-Redundant Powered Chassis Redundant Power Supply for Model 4395
Omnitron Systems Technology, Inc. 27 Mauchly #201, Irvine, CA 92618 Tel: (949) 250-6510 Fax: (949) 250-6514 E-mail:
[email protected] http://www.omnitron-systems.com
