Preview only show first 10 pages with watermark. For full document please download

Flir Sc2500 Nir

   EMBED


Share

Transcript

FLIR SC2500 NIR High Performance Versatile InGaAs Camera The SC2500 NIR complements FLIR’s range of products for R&D and automation applications to include: scientific research, imaging spectroscopy, astronomy, water or ice detection, laser profiling, medical procedures, solar cell inspection, silicon wafer processing, and many manufacturing applications. • 0.9 – 1.7µm, 320x256 InGaAs FPA • Removable Filter Holder • Gigabit Ethernet Digital Video • Advanced Trigger Capabilities • Factory Temperature Calibration • Lock-in Input SC2500 NIR Imaging Fast Frame Rates Lock-in The Model SC2500 embeds a 320x256 InGaAs detector with a spectral sensitivity from 0.9 to 1.7 µm. The SC2500 streams 14-bit digital data at 340Hz full frame. A Lock-in input feature can be used to ratio in the camera’s imaging, based on an image correlation process. This brings the detection threshold of the system down below the noise floor of the camera by an order of magnitude or more. Triggering The smart external triggering allows synchronization of the image capture to the most fleeting of events. Multiple Video Outputs The SC2500 features multiple independent video outputs to include: • Analog – Composite (NTSC or PAL) • Digital – Gigabit Ethernet Independent Analog & Digital Data Streams The SC2500 allows for both analog video and digital data simultaneously at all window sizes and frame rates. Adjustable Frame Rates The user can adjust the output frame rate of the SC2500 from 1Hz to the maximum frame rate at a given window size and integration time with better than 0.1Hz resolution. Windowing Removable Lens Interface The SC2500 features a removable lens interface making it easy to integrate with custom devices or spectrometers. The SC2500 supports windowed readout modes, allowing the user to select a subset of the total image to be read out, resulting in faster frame rates. The user can select the window size and position relative to the total focal plane array. Temperature Calibration Option An optional temperature calibration is availale for the SC2500 camera. This allows accurate non-contact temperature measurements from 400˚ to 2000˚ C. SC2500 Lens Interface ACCESSORIES SILVER SC2500 Camera kits include: FLIR offers a wide range of accessories to further enhance the capabilities of the Silver camera. SC2500 Camera Snap-in Filter Holder (1” Diameter) Power Supply CAT 6 Ethernet Cable Video Cable Trigger Cable Camera Control Software & Drivers Transit Camera Case Operating Manual Altair radiometric software Factory Temperature Calibrations Spectral filters Also available: • Software development Kit (C++ / Labview) Data Systems FLIR SC2500 Series Technical Specifications SC2500 Series Detector Specifications Detector Detector Response Resolution Pixel Pitch Sensor Cooling InGaAs 0.9-1.7µm 320x256 30x30µm TEC (Regulation / OFF) Electronics & Data Rate Integration Type Integration Time (Electronic Shutter Speed) Read-out Modes Asynchronous Integrate while read Asynchronous Integrate then read Snapshot 400ns to 1s, 200ns steps Dynamic Range Sensor Gain Full Frame Rate Subwindowing Minimum Window Size 14 bit Selectable (x1 or x20) 340Hz Random size and location 128 x 8 Performance Specifications Well Capacity Noise Quantum Efficiency 3.5 Me- or 0.17 Me<150 e- RMS (typical)c >70% @ 1.5µm Optical Specifications Optical Interface Filter Holder Removable C-Mount with filter holder Removable, for 1” filter, up to 2mm thickness Timing & Signals Analog Video Digital Video Trigger Lock-in Input NTSC or PAL, Composite 14 Bit Gigabit Ethernet LVTTL 0 – 10 Vpp Data Synchronous to Image Power & Enclosure Power Requirement Mounting Weight Dimensions w/o lens (LxWxH) IP Level 12 VDC ¼’ – 20 0.9 Kgs 82x50x172mm IP54 RS2500 Series Interfaces 1. 1 “ Removable Filter 1 2. Removable C-Mount Lens 3. GigE Digital Video 3 4 4. Analog Video 5 5. ON/OFF Switch 6. Lock-in Input 6 2 7 8 7. Trigger In 8. Power In SC2500 Back Panel SC2500 Packages: Lenses – Optionally Available: Lens Resolution SC2500 AltaIR package includes: 25mm (f/1.8) 50mm (f/1.4) 75mm (f/1.3) 100mm (f/5.6) 22˚ x 17˚ 11˚ x 9˚ 7˚ x 6˚ 5˚ x 4˚ FLIR SC2500 NIR Camera Tel: 1.800.464.6372 FLIR AltaIR Radiometric Software 25mm F/1.8 (22°x17°) Lens *Ask your FLIR representative about other available packages | Canada: 1.800.613.0507 | www.flir.com/thermography Specifications and prices subject to change without notice. Rev. 10/09-R1 Copyright © 2009, FLIR Systems, Inc. All rights reserved.