Transcript
Floor Machines Commercial Equipment
Pacesetter™ 17HD/20HD/20SD Floor Machines • Available in both 17 and 20 inch cleaning path sizes • 17HD and 20HD have 1.5 hp, 66 frame motors at 175 rpm • 20SD is 20 inches with 1.75 hp, 66 frame motor at 175 rpm • Ergonomic molded handles for safety and comfort • Pad driver included
FM810™ ST & XP Orbital Floor Machines
Pacesetter™ 20TS Two-Speed Floor Machine • Versatile 20 inch two-speed floor machine • 1.5 hp DC motor • 66 frame motors run at 180 and 320 rpm • Ergonomic molded handles for safety and comfort • Pad driver included
Smart cleaning.
• • • • • • • • • • •
1.5 hp heavy duty motor driving a 3,540 rpm orbital deck 20 x 14 inch cleaning path Includes weight kit consisting of three 21 lb weights Quiet, low vibration design at 68 dB A Switchable wheels-up/wheels-down modes (XP model) Baseboard cleaner standard (XP model) Detachable handle standard (XP model) 160 lb of down pressure Chemical-free floor stripping 50 foot, 14/3 safety yellow power cord Dust containment kit, solution tank kit, various scrub pads and sand screens available
Technical Specifications Models
Pacesetter™ 17HD
Pacesetter™ 20HD
Pacesetter™ 20SD
Pacesetter™ 20TS
Pad/Brush Diameter RPM Motor Motor Frame Size Transmission Amp Rating Voltage/Frequency Capacitors Cord Weight Pad Holder Included Safety Switch Approvals
17 in (43.2 cm) 175 1.5 hp AC 66 Dual Planetary Gears All Metal 15 120 V/60 Hz Dual Start and Run 50 ft (15.25 m) 100 lb (45 kg) Yes Yes ETL, CSA
20 in (50.8 cm) 175 1.5 hp AC 66 Triple Planetary Gears All Metal 15 120 V/60 Hz Dual Start and Run 50 ft (15.25 m) 102 lb (46 kg) Yes Yes ETL, CSA
20 in (50.8 cm) 175 1.75 hp AC 66 Triple Planetary Severe Duty Gears Box 15 120 V/60 Hz Dual Start and Run 50 ft (15.25 m) 102 lb (46 kg) Yes Yes ETL, CSA
20 in (50.8 cm) 175 1.5 hp DC Rectified 66 Triple Planetary Gears All Metal 15 120 V/60 Hz N/A 50 ft (15.25 m) 87 lb (40 kg) Yes Yes ETL, CSA
Models
FM810™ ST
FM810™ XP
Pad Diameter Orbit Speed Orbit Diameter Motor Voltage/Frequency Sound Level Cord Weight (machine only) (with weights) Pad Holder Included Safety Switch Approvals
14 in x 20 in (35.6 cm x 50.8 cm) 3,540 rpm 1/4 in (6.4 mm) 1.5 hp 120 V / 60 Hz 68 dB A 50 ft (15.25 m) 98 lb (44.5 kg) 161 lb (73 kg) Yes Yes ETL
14 in x 20 in (35.6 cm x 50.8 cm) 3,540 rpm 1/4 in (6.4 mm) 1.5 hp 120 V / 60 Hz 68 dB A 50 ft (15.25 m) 106 lb (48 kg) 169 lb (76.7 kg) Yes Yes ETL
Specifications are subject to change without notice.
14600 21st Avenue North Plymouth, MN 55447-3408 www.advance-us.com Phone 800-850-5559 Fax 800-989-6566
240 Superior Boulevard Mississauga, Ontario, Canada L5T 2L2 www.nilfisk-advance.com Phone 800-668-8400 Fax 800-263-5111
©2015 Nilfisk, Inc. Form L1606A 9-8-15
www.advance-us.com
Pacesetter™ 17HD/20HD/20SD/20TS Floor Machines
FACT SHEET TYPICAL APPLICATIONS INCLUDE • • • • • •
Supermarkets Schools and Universities Hospitals Office Buildings Hotels / Motels Heavy Manufacturing Plants
OPTIONAL ACCESSORIES INCLUDE • • • • •
Whether stripping, scrubbing, screening, or bonnet cleaning, the Advance Pacesetter™ line of floor machines has a model to fit your needs and applications. Each of the four Pacesetter models is built with an all cast metal, chrome plated base. The heavy-duty construction and durability of the Pacesetter sets it above the competition. All Pacesetter models have an ergonomic molded handle that protects the user’s hands during operation along walls and around corners. A red safetylock switch allows the operator to easily control when the machine goes into operation. An easy-to-use compression style lever changes the height adjustment of the handle for all operators. Pad holders are standard on the Pacesetter, and the yellow, super-flex cord offers ease in cord handling and reduced tangling. A clear plastic hospital plug allows the operator to verify the electrical integrity of the connection at each use of the machine. At 1.5 hp, 175 rpm, the Pacesetter™ HD is available in 17 and 20 inch sizes. A triple-planetary gear design lasts longer than other gear drives because they do not develop a wear pattern. A sealed gear box requires no maintenance. The Pacesetter™ 20SD is a super duty 20 inch floor machine. For extreme duty, the 1.75 hp, 175 rpm machine also has the triple-planetary gear design for longer wear. The Pacesetter™ 20TS is a two-speed floor machine with a 1.5 hp and a DC rectified motor. The two-speed machine runs at 180 and 320 rpm.
A variety of brushes Level-set pad holder Splash guard Handle-mount solution tank Additional weight kit available
Advance
Pacesetter™ 17HD/20HD/20SD/20TS Floor Machines Safety activation switch on all models
Defining Cleaning Innovation...
Easy to use compression adjuster for handle height
Molded, ergonomic handle includes comfortable trigger levers and safety lock-out switch.
Convenient cord wrap holder Heavy gauge metal construction throughout base
Base is cast metal and chrome plated for easy cleanup
Large non-marking rear wheels make transporting easy Easy to use handle height adjuster.
• Our products are designed using innovative technology that increases productivity and drives down the cost to clean. • You can get expert service and maintenance for your Advance machines from factory-trained personnel around the world. Fast parts delivery, too. • Maintain peak performance with Nilfisk Parts.
17 in (43 cm) and 20 in (51 cm) pad or brush sizes
Technical Specifications Model Pad / Brush Size Pad Drive System Motor Horsepower Frame Size Motor Amps Capacitors Motor Voltage Revolutions Per Minute Transmission
The 50 foot cord is nonmarking safety yellow colored.
Clutch Plate Body Construction Machine Weight Power Cord Length Type Operator Handle Noise Level Approvals Part Number
Pacesetter™ 17HD 17 in (43.2 cm)
Pacesetter™ 20HD 20 in (50.8 cm)
Pacesetter™ 20SD 20 in (50.8 cm)
Pacesetter™ 20TS 20 in (50.8 cm)
1.5 hp AC
1.5 hp AC
1.75 hp AC
66 15 A Dual, start and run 120 V 175 rpm
66 15 A Dual, start and run 120 V 175 rpm
66 15 A Dual, start and run 120 V 175 rpm
1.5 hp DC Rectified 66 15 A N/A 120 V 180/320 rpm
Triple planetary gears – all metal
Triple planetary gears – all metal
Triple planetary Triple planetary gears – all metal severe duty gears box NP 92 (industry NP 92 (industry NP 92 (industry NP 92 (industry standard) standard) standard) standard) All steel with chrome plated bell housing and handle shaft with compression style handle height adjustment. Includes rubber wheels for transportation. – ALL MODELS 100 lb (45 kg) 102 lb (46 kg) 102 lb (46 kg) 87 lb (40 kg) 50 ft/ 15.25 m – ALL MODELS Safety Yellow Super-flex with hospital grade plug – ALL MODELS Comfortable and solid handle with safety interlock activation preventing accidental start-up – ALL MODELS 65 dB A 65 dB A 65 dB A 70 dB A ETL, CSA ETL, CSA ETL, CSA ETL, CSA 01330A 01410A 01460A 01440A
Specifications are subject to change without notice.
©2015, Nilfisk, Inc., Printed in U.S.A., Form L1826A 8-15
recyclable
Pacesetter™ 17HD/20HD/20SD/20TS Floor Machines
FACT SHEET TYPICAL APPLICATIONS INCLUDE • • • • • •
Supermarkets Schools and Universities Hospitals Office Buildings Hotels / Motels Heavy Manufacturing Plants
OPTIONAL ACCESSORIES INCLUDE • • • • •
Whether stripping, scrubbing, screening, or bonnet cleaning, the Advance Pacesetter™ line of floor machines has a model to fit your needs and applications. Each of the four Pacesetter models is built with an all cast metal, chrome plated base. The heavy-duty construction and durability of the Pacesetter sets it above the competition. All Pacesetter models have an ergonomic molded handle that protects the user’s hands during operation along walls and around corners. A red safetylock switch allows the operator to easily control when the machine goes into operation. An easy-to-use compression style lever changes the height adjustment of the handle for all operators. Pad holders are standard on the Pacesetter, and the yellow, super-flex cord offers ease in cord handling and reduced tangling. A clear plastic hospital plug allows the operator to verify the electrical integrity of the connection at each use of the machine. At 1.5 hp, 175 rpm, the Pacesetter™ HD is available in 17 and 20 inch sizes. A triple-planetary gear design lasts longer than other gear drives because they do not develop a wear pattern. A sealed gear box requires no maintenance. The Pacesetter™ 20SD is a super duty 20 inch floor machine. For extreme duty, the 1.75 hp, 175 rpm machine also has the triple-planetary gear design for longer wear. The Pacesetter™ 20TS is a two-speed floor machine with a 1.5 hp and a DC rectified motor. The two-speed machine runs at 180 and 320 rpm.
A variety of brushes Level-set pad holder Splash guard Handle-mount solution tank Additional weight kit available
Advance
Pacesetter™ 17HD/20HD/20SD/20TS Floor Machines Safety activation switch on all models
Defining Cleaning Innovation...
Easy to use compression adjuster for handle height
Molded, ergonomic handle includes comfortable trigger levers and safety lock-out switch.
Convenient cord wrap holder Heavy gauge metal construction throughout base
Base is cast metal and chrome plated for easy cleanup
Large non-marking rear wheels make transporting easy Easy to use handle height adjuster.
• Our products are designed using innovative technology that increases productivity and drives down the cost to clean. • You can get expert service and maintenance for your Advance machines from factory-trained personnel around the world. Fast parts delivery, too. • Maintain peak performance with Nilfisk Parts.
17 in (43 cm) and 20 in (51 cm) pad or brush sizes
Technical Specifications Model Pad / Brush Size Pad Drive System Motor Horsepower Frame Size Motor Amps Capacitors Motor Voltage Revolutions Per Minute Transmission
The 50 foot cord is nonmarking safety yellow colored.
Clutch Plate Body Construction Machine Weight Power Cord Length Type Operator Handle Noise Level Approvals Part Number
Pacesetter™ 17HD 17 in (43.2 cm)
Pacesetter™ 20HD 20 in (50.8 cm)
Pacesetter™ 20SD 20 in (50.8 cm)
Pacesetter™ 20TS 20 in (50.8 cm)
1.5 hp AC
1.5 hp AC
1.75 hp AC
66 15 A Dual, start and run 120 V 175 rpm
66 15 A Dual, start and run 120 V 175 rpm
66 15 A Dual, start and run 120 V 175 rpm
1.5 hp DC Rectified 66 15 A N/A 120 V 180/320 rpm
Triple planetary gears – all metal
Triple planetary gears – all metal
Triple planetary Triple planetary gears – all metal severe duty gears box NP 92 (industry NP 92 (industry NP 92 (industry NP 92 (industry standard) standard) standard) standard) All steel with chrome plated bell housing and handle shaft with compression style handle height adjustment. Includes rubber wheels for transportation. – ALL MODELS 100 lb (45 kg) 102 lb (46 kg) 102 lb (46 kg) 87 lb (40 kg) 50 ft/ 15.25 m – ALL MODELS Safety Yellow Super-flex with hospital grade plug – ALL MODELS Comfortable and solid handle with safety interlock activation preventing accidental start-up – ALL MODELS 65 dB A 65 dB A 65 dB A 70 dB A ETL, CSA ETL, CSA ETL, CSA ETL, CSA 01330A 01410A 01460A 01440A
Specifications are subject to change without notice.
©2015, Nilfisk, Inc., Printed in U.S.A., Form L1826A 8-15
recyclable
FM810™ ST & XP Floor Machines
The Next Evolution of Advance Floor Machines
Smart cleaning.
FM810™ ST & XP Floor Machines Ideal applications include: • Supermarkets • Schools and Universities • Hospitals • Office Buildings • Hotels / Motels • Heavy Manufacturing Plants • Bathrooms • Gymnasiums
Introducing the Advance FM810™ The next evolution of Advance orbital scrubbing floor machines is here: the Advance FM810™. The FM810 floor machine delivers the ultimate combination of ease of use and versatility for unmatched cleaning performance in both wet and dry applications. Available in both a standard ST model and a deluxe XP model packed with exclusive patent-pending features geared to BSCs and other power users.
Elevating Power Featuring a full 1.5 horsepower motor, 160 pounds of down pressure and a 3,540 RPM pad driver, the FM810 is designed to get cleaner floors in fewer passes. That means operators aren’t just getting the floors clean or stripped faster—they are also able to do it with less labor.
Use 3M™ SPP or Diamond Pads to abrade a wide variety of floor surfaces.
Expanding Applications • Easily reach small, hard-to-reach areas where large automatic scrubbers will not fit or don’t make sense. • Supplement Advance REV™ machines to complete chemical-free floor finish removal projects in all areas of a room. • Leverage standardized 14 x 20 inch pad deck to attach pads for cleaning grout in bathrooms, prepping gym floors for recoats, bonnet cleaning carpet, and even burnishing terrazzo, marble, and concrete.
Baseboard cleaner, standard on the XP model, eliminates the need for getting down on your hands and knees or using a dedicated baseboard cleaning machine. (Optional on ST machine)
Minimizing Disruption – With strategically placed vibration-dampening materials packed into the body of the machine, the FM810 is significantly quieter even at its higher operating speed. That means you get full cleaning performance without noise disruption.
4
FM810™ XP: Deluxe Features – The FM810 XP (shown) adds an additional package of innovative features that enhance ease of use, functionality and transport.
1
Baseboard cleaner
2
Three 21 pound weights
3
Adjustable, detachable handle
4
Safety switch – protects against unintended machine start-up
5
1.5 hp heavy duty motor driving a 3,540 rpm orbital deck
6
6 inch wheels can be raised or lowered for ease of use, functionality and transportation
3 5 6 2
1 Innovative Wheels-Up / Wheels-Down Feature
Full Modularity for Easy Transport
Switchable Modes – Easily switch between operating modes with the wheels up or on the floor. When the wheels are up, the FM810 XP provides the full-directional, high maneuverability of traditional floor machines. When the wheels are down, it delivers the high productivity forward-and-backward motion like a burnisher, giving you control so balanced that you can operate it with one hand, and not get fatigued.
The FM810 XP is fully modular to allow BSCs and other operators who frequently lift and transport their equipment between job sites to separate it without tools into more manageable pieces. Each modular attachment component is painted bright yellow for easy identification, making disassembly and reassembly a breeze.
Baseboard Cleaner Tool
The FM810 XP comes with an innovative baseboard cleaner attachment as a standard feature. This simple device easily attaches to the front of the machine to provide a convenient alternative for cleaning baseboards without having to purchase a separate machine, or worse, getting down on your hands and knees to scrub.
Three 21 pound weight plates are easily removed.
Technical Specifications FM810™ ST
Model Cleaning Pad Size Motor Voltage/Frequency Orbit Speed Orbit Diameter Power Cable Sound Level Machine Total Weight Machine w/o Weights Weights Dimensions (L x W x H) Warranty Additional Standard Features
14 in x 20 in 1.5 hp 120 V / 60 Hz 3,540 rpm 1/4 in (6.4 mm) 50 ft (15 m), 14/3 Safety Yellow 68 dB A 161 lb (73 kg) 98 lb (44.5 kg) 63 lb (28.5 kg) 20 in x 20.5 in x 44 in (50.8 cm x 52 cm x 112 cm) 3 Years Parts, 2 Years Labor Three 21 lb Weights Safety Switch 5 in Wheels Wheels-Up Only
Part Number
56105614
FM810™ XP 14 in x 20 in 1.5 hp 120 V / 60 Hz 3,540 rpm 1/4 in (6.4 mm) 50 ft (15 m), 14/3 Safety Yellow 68 dB A 169 lb (76.7 kg) 106 lb (48 kg) 63 lb (28.5 kg) 20.75 in x 20.5 in x 44.5 in (52.7 cm x 52 cm x 113 cm) 3 Years Parts, 2 Years Labor Three 21 lb Weights Safety Switch 6 in Wheels Wheels-Up/Wheels-Down Baseboard Cleaner Detachable Handle 56105616
Accessories and options • 3M SPP Pads • Red Scrub Pads • Blue Scrub Pads • Black Scrub Pads • Carpet Bonnet • Grout Pad • Diamond Pads • Sand Screens • Dust Containment Kit • Solution Tank Kit • Baseboard Cleaner (FM810™ XP Standard)
Specifications are subject to change without notice.
Scrub Pads
Diamond Pads
Grout Pad
Sand Screens
SNAP IT!
Dust Containment Kit for dry applications
Solution Tank Kit for wet applications
Smart cleaning. Our products are designed using innovative technologies that increase productivity
14600 21st Avenue North Plymouth, MN 55447-3408 www.advance-us.com Phone 800-850-5559 Fax 800-989-6566
and drive down the cost to clean. Maintain peak performance with Nilfisk Parts.
240 Superior Boulevard Mississauga, Ontario, Canada L5T 2L2 www.nilfisk-advance.ca Phone 800-668-8400 Fax 800-263-5111
©2015 Nilfisk. Form L3407A 4-29-15
A Nilfisk-Advance Brand
www.advance-us.com
